From Battery power to running off the mains.

Hi guys
Just wondering - when I'm running my iBook off the battery and then decide to run it off the mains again, do I need to shutdown and then turn on the mains and then restart? Or can I just simply have it running off of the battery and then turn on the mains switch when I want to goto mains power?

You can just plug your iBook in whenever it needs to be charged. There's no need to restart/shutdown when switching from battery to power adapter.
Hope this helps,
-Ryan

Similar Messages

How to simplify opening/closing Excel to grab data from LabView based software running outside the main VI

Hi,
Right now I have a program written to automate an AOP pilot with a few inputs and outputs (3 valves, ozone generator, UV lamp, TOC meter, ozone meter in liquid and gas phase, and a UV-VIS detector). The valves are controlled with digital outputs, the rest are analog in- an outputs going into a USB-6009. The one exception is the UV-VIS detector (S::CAN Spectro::lyser). We read in about 200 Abs/m values with their corresponding wavelengths. The software of this tool is ran on the same computer and it writes down these values in an Excel file (.fp). My VI needs to select this excel file while running, and grabs the corresponding data from the Excel file. I made a finetuner to select the latest data from the excel file. Now, even though this works, it's not practical for many reasons. It closes all other excel files while running for example, and opens and closes Excel twice in 30 seconds.
I found out the software of the UV-VIS detector is written in LabView too, but the company doesn't seem to care much about sharing the original VI's or making it complementary with other LabView VI's. Now I was wondering if there's an easier solution than opening/closing Excel. Are global variables an option for this problem? I'm far from an expect in LabView, so I just want to know if I should put in the time to learn about global variables or not
Thanks in advance.
Dominic

hello dominic;
I have read your study about AOP recently and I wonder your Labview VI. Can you share the code you used with me?
kind regards,
Dr. Baris OZLUOYMAK
Electrical and Electronics Engineer (MSc)
University of Cukurova, Faculty of Agriculture,
Department of Agricultural Machinery,
01330 Adana / TURKEY
Tel: 90 322 3386408
Fax: 90 322 3387165
E-mail: [email protected]

Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigge

Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.

Working battery needs to be in for the computer to function.

MBP Won't Run Off the Battery

I've had my computer for a little over a month, and the other day it stopped running off the battery. Everything is fine when I have the AC adapter plugged in, but the computer won't start up if it is disconnected. I ran the computer off the battery more often than not before this started happening. I removed the battery and put it back in a few times, but that didn't help. Has anyone seen this before? Thanks!

Mine did almost the exact same thing.
A few days after the update, it started registering 32 hours of remaining charge (33500+ MhA), and one day, all of a sudden, the battery just died.
Mac OS says there is no battery installed, obviously it won't charge or run on battery power, when I press the LED button it does nothing. It's just dead.
My machine is almost 2 months old... I called Apple and complained about this whole thing, because my machine has almost every other defect out there, including the whine, the almost unbearable temperatures, the moo, and the LED buzz... so I told them that enough was enough and that I wanted a new machine.
They just said I sould drop it off at the Apple Center, and THEY would decide if should get a new machine.
I feel so terribly frustrated. How is it possible that you spend $2000+ Dlls on a machine that after just 2 months does all these things, and still be treated unfairly, like an idiot, with arguments like "It's our decision if we replace the machine, or repair it..." ??
This is just not fair. But what can we do, right?

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps wit

Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared. That doesn't work anymore. How do you turn off the apps with ios7

Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past. With the new operating system you also swipe downward to get the search bar to find an app

I cannot set up page set prior to printing. From file to Page set then it comes up full depth..running off the bottom. I cannot print from the web

Question
I cannot set up page set prior to printing.
I go from File to Page set which comes up very narrow and tabs Format& Options and Margins Headers/Footers.
These are full depth..running off the bottom. I cannot set footers. I cannot print from the web
When I go to Print Preview I get a totally gray screen

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Peep sounds when working from battery power

Hello
I bought a new HP DV6-1340 laptop
I hear some strange peep sound from the notebook hardware when its working from battery power.
When working from outlet power there is no peep sound from the hardware.
Maybe its because the battery is new or something there wrong ?
Thanks in advance for help

I solved it my self. It was OK (no buzz and fuzz) when it was plugged in (when the electicity line was down once and I was running on the UPS battery).....

T61 leds from battery, power, USB and Ethernet blinking

I've cannot run laptop with and without battery, it's not charging and not power on without battery and on ac. When I plug in into AC thouse leds still blinking but computer don't run?
Know some solution?

Your question is not very clear here. I believe you're having power issues with the unit?
If your laptop can power on with the battery and not with the AC adapter, you may need another AC adapter. If you have a spare AC adapter, try to swap adapters and see if this fixes the problem. Tech support can order one for you if your unit still has warranty coverage.
You may also want to check the yellow AC port (called the DC-in cable) on your unit to make sure that it is not loose. If your AC adapter fits very loosely when it is connected into the AC port, you will need to replace either the DC-in cable internally or replace the systemboard
If you laptop can run off the AC adapter just fine, but loses power the moment you remove the AC adpater with just the battery still in, you will need another battery.
If the battery indicator is always flashing yellow and the battery doesnt charge at maximum capacity, consider replacing the battery.
Hope this helps,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Trying to configure Portal to run off the network

Hi all,
I am trying to configure Oracle Portal 3.0.9.8.2 to run off the network. I have taken all of the recommended steps in terms of configuring hostname, using a static IP, running and checking the ssoodatan script, updating the hosts file, and configuring a loopback adapter, but can still not make it work. The Portal works and functions fine when connected to the network, but as soon as disconnected from the network Portal returns
Error: Timeout occurred whilst retrieving page meta data 0 ms.
or
Sometimes it will display the banner, but the Portlets and the Providers will instantly timeout. I have cranked up the timeout levels of JServ and the Providers but to no avail. I have put the recommended timeout, stall, requesttime, buffer, minStall, minTimeout in the zone.properties file, but no luck.
I have noticed within the jserv.log the error message below. The link that jumps out at me is UnknownHostException: www-proxy.us.oracle.com. I did have my proxy server set at one time, but I erased it from the global settings page, and I ran the procedure I found somewhere on this discussion board to make sure it was set back to null. When I run the diag.cmd program it shows my proxy server being empty. Where could this be picking this up from, I also have proxy servers turned off in my browsers. Any suggestions or help??
13/02/2002 16:04:08:752 PST] page/JNI: Exception when trying to connect in 1.
[13/02/2002 16:04:08:752 PST] page/Timeout occurred, label=147 url=http://jstrada-lap.us.oracle.com/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet time=10ms
[13/02/2002 16:04:08:762 PST] page/ContentFetcher Unexpected Exception, name=content-fetcher0
java.net.UnknownHostException: www-proxy.us.oracle.com
     at java.net.InetAddress.getAllByName0(InetAddress.java:575)
     at java.net.InetAddress.getAllByName0(InetAddress.java:544)
     at java.net.InetAddress.getAllByName(InetAddress.java:537)
     at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java, Compiled Code)

I think you must add an entry to your /etc/hosts file, as follows:
127.0.0.1 noa noa
and create a vhost entry on /etc/httpd/conf/extra/httpd-vhosts
<VirtualHost *:80>
ServerName noa
DocumentRoot "/srv/http/"
<Directory "/src/http/">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
</VirtualHost>
Although I'm not sure if the vhost is actually necesary, but it won't harm.
pd: if you use vhosts, remember to uncomment "Include conf/extra/httpd-vhosts.conf" con /etc/httpd/conf/httpd.conf and restart apache
# systemctl restart httpd

My bookmarks run off the bottom of the page, and I cannot move them up

When I open my bookmark folder and try to open a subfolder near the bottom of the screen, the bookmarks in this subfolder run off the bottom of the screen, and I can find no way to move them into a visible area.

There is a little triangle arrowhead used to scroll the bookmarks.
There have been some changes in pre release versions of Firefox.
What menus and icons are you using ?
For instance are you using the new menu icon that is alongside the Bookmarks star in Firefox 29 and later ?
(Unlikely from the description) Or are you using a second click on the bookmarks star itself ?
That has a slider on the scrollbar and has a tree of folders that may be expanded.
See [[Use bookmark folders to organize your bookmarks]]

No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

this is what you need to do to exclude everything apart from desktop.
on time machine preferences, click on Options
click plus sign, on the new window, click macintosh HD
do a Control + A then deselect users then click okay
go to options again, plus sign, go to users, control +A then deselect your user account
go to options again, plus sign, go to your user account, control + A, deselect desktop
start the back up.

Why do double-sided copies run off the edge when single-sided do not?

Hi...
I just made a document in Pages that is essentially one big table (or in other words, a spreadsheet without having to purchase Numbers). When I print it as single-sided, it fits perfectly on the page. But if I click double-sided, without changing anything else, the left margin runs off the page. The nature of this is such that I don't really want to significantly reduce the size. Is there some trick to this, or do I just have to remember to print it one-sided?
Thanks!

There should be an arrow, to get more choices to show. Also the checkbox is just showing you the current selected, you change the setting by touch the big icon, not the checkbox. The touch panel is not a high resolution one, so try to touch the checkbox, result in the icon being selected, that's why the setting didn't change. Try find the 1:1 icon and touch that.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

ITunes was deleted off the main computer where I installed my ipod nano. Now, itunes cannot read my ipod on my second computer. What do I do?

iTunes was deleted off the main computer where I installed my ipod nano. Now, itunes cannot read my ipod on my second computer. What do I do? I use a PC. I just want to be able to download songs again and put them on my ipod.

Hey
Does it charge when connected, if not you may have broken it..
You can always try an apple Genius at an Apple Store,
Jason

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

This u2 album doesnt wanna get deleted out of my phone i hid it from my itunes and switched off the the all music thing out of my music setting but 2 songs still in my playlist how do i permanently deleted out of my life period

this u2 album doesnt wanna get deleted out of my phone i hid it from my itunes and switched off the the all music thing out of my music setting but 2 songs still in my playlist how do i permanently deleted out of my life period and for some reason it wont let me slide it to the left

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

From Battery power to running off the mains.

Similar Messages

Maybe you are looking for