From CS to CS 5 why no upgrade from this version?

Would anyone have an idea as to why there is no upgrade from CS to the pending CS5?
I'm certain the designing architecture of CS to CS 5 is different, but wondering why the jump isn't made available.
Is it technical or something else?
If there is a possibility of this (upgrade to CS 5) let me know.
~A~

Adobe's upgrade policy is (and long has been, though less rigorously enforced) that upgrades are only permitted within three versions. No technical reason, just a business one.
Depending on where in the world you are, Adobe does offer a "post-announce upgrade policy" under which you can purchase a CS4 upgrade now and receive a free upgrade to CS5.

Similar Messages

I just recently upgraded from a 4S to a 5C. I backloaded the 5 from Itunes and now everytime i plug into itunes, it asks if I want to set up as new or restore from a previous backup. Why is it doing this. I did it twice yesterday.....

I just recently upgraded from a 4S to a 5C. I backloaded the 5 from Itunes and now everytime i plug into itunes, it asks if I want to set up as new or restore from a previous backup. Why is it doing this. I did it twice yesterday..... In addtion, those are the only options I have. I cannot do anything else unless I choose one of the two. Zero options. Phone works fine though.

I figure that either of those options will result in losing all SMS and data created since the last backup. Not a major loss, but ** annoying when nothing has changed and the time it will take to restore.
When was the last time you synced your iPhone with iTunes since the backup is updated as the first step during the sync process?
Is there anyway to recover this WITHOUT having to do a full restore or set up as new?
In a word, no.
If I do restore or set up as new, how do I know it's not going to do the same thing tomorrow (like a few other forums threads I've read indicate might happen)?
There is no way to know for certain but I've never experienced the same in the first place. I venture to say having to do this is the exception rather than the rule.

HT204088 I want a receipt for the payment taken from my visa card. Why am I finding this so hard?

I want a receipt for the payment taken from my visa card. Why am I finding this so hard to find/obtain?
Cheers, Paul.

Receipts are sent to your email address. It sometimes takes a couple of days to arrive, so if you just made an order, wait a couple of days and the receipt will probably show up. Otherwise the only option is the Purchase History as described in the support article from which you came, and there's no print mechanism so you would need to take a screen shot of the relevant page.
Regards.

Why is implicit deny missing from outside int incoming access rules after upgrade from 8.25 to 9.1?

i have just noticed that after upgarde of image and asdm to 911 and 711, the implicit deny acl is missing from the outside interface. Is this deliberate or a poor upgrade. i am upgrading from 8.25 normally, depends what the reseller sends me.
should this be happening or am i upgrading in too large a jump?
thanks,
david

Hi,
Would really see some screencapture / output of the thing you are referring to.
I imagine that you are perhaps referring to something related to ASDM? I dont personally really use ASDM at all for ASA configurations to I am not up to date on the possible problems it might have or changes made to its interface.
I am not sure if you have an ACL attached to the "outside" interface? If so then I think the ASDM should show the Implicit Deny at the end while this wont show on the CLI side at all.
I did just check my own ASA at home which is running 9.0(2) and ASDM 7.1(2) at the moment and it doesnt show an Implicit Deny for my LAN or WAN interfaces ACL.
Though the basic ACL operation is still in effect. If its not allowed in the ACL then its blocked by Implicit Deny. This can be confirmed with "packet-tracer" test on your firewall also.
- Jouni

Why would upgrading from Lion to Mountain Lion more than double the size of my Time Machine backup?

I have a 500GB Time Capsule that has 248 GB used. After upgrading from Lion to Mountain Lion, Time Machine reported that there was no longer enough room on the TC to complete the backup. Surely the new system files aren't taking up over 200GB? Does it somehow want to copy all of my user files again, even though the vast majority of those haven't changed since the previous backup?
I'd like not to have to upgrade to a larger TC just because of a system upgrade.
Thanks in advance.

If it is working as expected, what do you need with the old backup?
If you want to be able to go back to where you were prior to an upgrade, isolate that backup and don't use it again. As far as Time Machine can tell, the whole drive changed.
The link I posted contains probably everything that anybody knows about Time Machine and how to manipulate it to work as you would like as opposed to how it was designed to work. There are FAQs to continue a backup as opposed to starting fresh, but I wouldn't recommend it for the reasons above. Pondini probably doesn't, either.
If you are going to do a wholesale upgrade of the OS, I would create a bootable clone using something like Carbon Copy Cloner or Super Duper. A bootable clone on an external drive can have you back up and running instantly if the upgrade fails in any way. If the upgrade goes fine, store it away in case you find the current system isn't to your liking.

Why would upgrade from OSX 10.5.8 to 10.6.3 create browser problem?

Please help! Since upgrading my MacBook from OSX 10.5.8 to 10.6.3 I cannot access one of my online accounts anymore, neither on Safari (now 5.1.10) nor on Firefox (26.0). It worked fine before.
To access this account and as a second login step, the website requires that you select the 6 digits of your password/number from a login panel whose numbers 0 to 9 are located in different squares everytime you try and log on. The first login step that requires typing a continuous number into a field works fine, but it's this next step that's refused.
Could something (e.g. a new security or network setting) be blocking this digit-by-digit identification process?
I'd appreciate any suggestions what I could go through and check.
P.S. I just upgraded again to 10.6.8 hoping this might fix the problem, but to no avail.

bzmedia,
Make sure your software is up to date (run software update) also see if Firefox needs to be updated.
You may have to call the Main office, they must have an IT person to help customers. (I had an issue with one of my banks sites, and I had to call the Main office and they had me switch something)
By preferences I was refereing to Safari making sure that block cookies was not checked,(Safari preferences/Privacy, also check security tab and make sure that Java script is enabled) also see if your firewall may be causing the issue (system preferences/Security,firewall tab)
Seeing that it is both browsers, has me scratching my head.
I did find something similar to your issue, it may or may not be the problem, but check them anyway.
Try going to applications/Utililies/Keychain Access.
Close all windows.
Keychain Access -> click on System Roots on the left, and then click on Certifcates on the bottom left.
Check to see if any of the certificates on the right have the blue "triangle" symbol - this means they have custom trust settings.
You may have to go thru all the certificates, so you'll have to change them via the method below. Changing them just by changing the access to "system defaults" doesn't seem to save. The method below worked for me.
Double-click on each certificate with the custom setting (blue "triangle"), expand the section labled "trust". Change the "Secure Sockets Layer (SSL)if that is set" setting to "no value specified". Close window - you should be prompted for the password. Double-click on the certificate again, expand trust, change the "When using this certificate" setting to "Use System Defaults". Close window, and re-enter password.
If you didn't re-enter your password upon closing the window, the setting didn't take. The blue "triangle" should disappear after a few seconds when it's set back to default. Once all of the certificates are changed back to default, restart Safari.
Also there must be someone from the bank that can help with this matter, although most likely not at a branch. Did it work when you were at the bank?
Maybe seventyone will have the answer you need, I know he has been trying to get a post to you, but the system is messing him up.
Hope this helps,as I can't seem to think of anything else at this time, although I will keep looking around.
All the best

Why is upgrading from OSX 10.3.5 to 10.3.9 causing problems with my midiman

When I upgraded to OSX 10.3.9 from 10.3.5 Logic and the hard drive are not finding my midisport 2x2. i have tried updating the driver but it mentions something about a missing classic folder from OSX 9.? and says to upgrade which I already have done. i had no problems installing it the first time. Logic is still conected with my m-audio firewire. i have never had any problems untill i upgraded so I could add final cut

Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

HT1338 i have os x 10.4 and need 10.5 to upgrade itunes for an ipod touch 4th gen...can i purchase 10.5 from the apple store and can i upgrade from 10.4 to 10.5 without issues

i currently have os x 10.4 and per itunes, i need 10.5 to download the itunes version that supports the ipod touch 4th generation
can i purchase 10.5 on the apple store and is it safe to go from 10.4 directly to 10.5....what is the best procedure

You cannot get Leopard from Apple any more. You will find copies from third-party vendors on eBay, Amazon, or Google.
If you have an Intel Mac you can upgrade to Snow Leopard instead provided your model meets the requirements shown below:
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.

How can I completely remove my FF 4.0.1 from my system. Ever since I upgraded from 3.? I have had problems with FF. I use XP Pro service pack3.

I have performed all the TS methods suggested. All I want is to purge all of FF from my system. I have purged profiles, and others as recommended during TS. It doesn't matter if all plugins are disabled or not.I want a very clean system of FF (registry included)
I will then try to reinstall FF 4.0.1 to see if it works as designed.
IE works fine,but I prefer FF.

It is not a good idea, to manually delete registry keys. Java uninstaller removes all registry entries that are needed to perform clean future installation.
You might see some of the keys not removed by Java unistaller but they do not prevent any user from doing fresh installation of Java in future.
Java removal tool is currently being developed, but that is for removing old/unsecure and unsupported Java versions. The tool isn't really intended to remove current/above security baseline versions of Java.
Also, the tool does a standard un-install using msiexec /x. It won't specifically delete registry keys - it lets msiexec do it.

Upgraded to iPhoto 11 yesterday. on start it says library needs to be upgraded to this version. when upgrade is clicked says cannot upgrade and quits entirely

iPhoto 11 starts by requiring upgrade of library but upgrade fails and iPhoto quits. Why why why?

Because something's broken broken broken.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

HT201269 When I plug my iPhone 5s into the computer to restore it from iTunes a pop-up comes up and says "this version of iTunes has not been correctly localized for this language. Please run the English version." I have no idea what that means or how to

In need of help figuring this phone stuff out! I am trying to get all the apps from my husbands old phone to his new one. I have already backed up the old phone and got everything onto iTunes, but every time I plug the new iPhone 5s into my computer it says that the version of iTunes is not correctly localized for this language and asks for me to run the English version. I have no idea how to do that? Please help.

Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy

The Home page fonts are microscopic and my email has reduced fonts since upgrading to this version. I do not see any method to adjust in Help.

Fonts on the home page can not be read because they are so small. when I go to my email the fonts are reduced from the previous version of Firefox. I have looked at all of the help topics and I can not find a resolution to change the fonts to a larger size.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Upgrading from PSE 9 to 12

I tried to do this several times but each time it failed. When I checked my account it said that "It may take 24 hours for my order to be processed. Is this the reason why my download failed?

Hi Kuideep, thanks it is fixed now. I downloaded it again last night and it worked.
Date: Mon, 28 Oct 2013 11:42:26 -0700
From: [email protected]
To: [email protected]
Subject: Upgrading from PSE 9 to 12
    Re: Upgrading from PSE 9 to 12
    created by Kuldeep Kandpal in Downloading, Installing, Setting Up - View the full discussion
Hi donlancs,
Could you please let us know the exact error message when you are downloading the software.
Regards
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794701#5794701
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794701#5794701
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794701#5794701. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Downloading, Installing, Setting Up at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

StorageTek 6140: How to upgrade from 06.60.11.11 to 07.15.11.12?

Hi,
How can I upgrade to 07.15.11.12?
CAM shows me only 06.60.11.11 as last firmware for this storage.
Another StorageTek 6140 are running with 07.15.11.12 and is in Ok-state, so CAM is up-to-date.
More info:
System/NVSRAM: N399X-660843-003
Tray.85.Controller.A: 06.60.11.11
Tray.85.Controller.B: 06.60.11.11
Tray.85.Drive.01: 0605
Tray.85.Drive.02: 0605
Tray.85.Drive.03: 0605
Tray.85.Drive.04: 0605
Tray.85.Drive.05: 0605
Tray.85.Drive.06: 0605
Tray.85.Drive.07: 0605
Tray.85.Drive.08: 0605
Tray.85.Drive.09: 0605
Tray.85.Drive.10: 0605
Tray.85.Drive.11: 0605
Tray.85.Drive.12: 0605
Tray.85.Drive.13: 0605
Tray.85.Drive.14: 0605
Tray.85.Drive.15: 0605
Tray.85.Drive.16: 0605

Ok, let's try to clarify things. The FW 06.xx and 07.xx are incompatible. The configuration database (DB) which is on the drives is different between 06.xx and 07.xx, that is why an upgrade from 06.xx to 07.10.xx.xx requires a special utility, why it should be done by Sun support engineers and why it can be done only offline. Today we cannot upgrade from 06.xx to 07.15, we need to upgrade to 07.10 with the special utility then CAM can be used to upgrade to 07.15. Any further upgrades within 07.xx can be done online with CAM.
If you move a drive from an array with 06.xx into an array with 07.xx, there is a special procedure in CAM Service Advisor. However moving drives from 07.xx to 06.xx isn't supported and won't work, this can even lead to issues.
The FW 07.xx includes bug fixes as well as new features (ie: volumes >2TB, Raid 6, etc...) whereas the FW 06.xx remains now a sustaining FW which means that there is only bug fixes.
The latest FW for both streams are:
06.60.11.10 (for the 6130), 06.60.11.11 (ie: 6140, 6540)
07.15.11.12 (6140, 6540)
07.30.xx.xx (6580/6780)
The latest version of CAM is now CAM 6.2.0_14 which brings 06.60.11.10/11 and 07.15.11.12 and 07.30.xx.xx (I don't remember now the exact numbers for xx.xx).
If you install CAM 6.2.0_14 and have a 6140 running 06.19.25.xx, CAM will suggest you to upgrade to 06.60.11.11, it won't suggest you to upgrade to 07.xx because it knows that this requires a special utility and procedure.
If you have this array running 07.10, CAM will suggest you to upgrade it to 07.15.11.12 and this can be done online with CAM.
Hope this helps

Upgrading from CS3 to CS5

I purchased Photoshop CS5 upgrade. When I enter the CS3 serial number (Adobe CS 3 Design Standard) I receive the notice that the serial number is valid, but a qualifying product cannot be found on my computer. Why is the upgrade not able to find my CS3 copy?

Thank you for your reply, Jeff. I did enter the CS5 serial number, and when prompted entered CS3, as my original, (the updating product) followed by that serial number. It was at that point I received the message that the serial number was valid, but a qualifying product cannot be found on my computer. I have read elsewhere that one cannot upgrade from a suite to an application. Have I made a 'financial error' and purchased the wrong product? Sue
Date: Sat, 25 Feb 2012 16:43:19 -0700
From: [email protected]
To: [email protected]
Subject: upgrading from CS3 to CS5
    Re: upgrading from CS3 to CS5
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You would first be entering the Photoshop CS5 serial number followed by your eligible product. If the serial number is valid then it should not be also searching for a qualifying product.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4229685#4229685
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4229685#4229685. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

From CS to CS 5 why no upgrade from this version?

Similar Messages

Maybe you are looking for