From leased line to individual laptops

execuse my ignorance , I need help .
I ordered a leased line to my building , will be available in 3 months , I wonder what equipments I need to allow my tenants log to internet using wireless connection from the leased line , I have no idea about the equipments needed , I highly appreciate your advice and sorry if I posted this in the wrong section.

You don't want to do this with Linksys devices. Linksys is for consumers. Providing a wireless network with Linksys devices for 40-60 clients which all most likely expect a certain quality of that wireless service may be possible if you know really well what you do and how to handle and troubleshoot the equipment.
Otherwise I would highly suggest to look at Cisco Small Business devices. Check here https://supportforums.cisco.com/community/netpro/small-business
And honestly: considering your first post I would highly recommend to get a professional company to buy, install and operate the network for you.
If you are trying to operate it yourself I would expect that you will be busy troubleshooting complaints of your tenants during the next couple of months. Clients are picky and often you will get complaints about nothing. Some are more serious and really involve your equipment.
Thus unless your tenants don't expect anything and would happily accept even downtimes of a week or longer until you have got it fixed yourself I would really suggest you look for a company to handle this for you.
Put the costs of that company in relation to the 100s-1000s of hours you will spend the next months for choosing the right equipment, buying it, find the best locations for the access points, configuring the equipment to give each tenant a good quality connection and fare share of the available bandwidth (otherwise two people streaming videos from the internet could bring down the whole internet for all others...), troubleshooting tenant's devices and your devices, find problems, replace and RMA devices, etc. etc. etc....

Similar Messages

Somehow accidentally hid the To/From/Subject line headers on individual messages.

In trying to change some individual display settings, I somehow managed to turn off the header for the To/From/Subject line fields on emails when you open them in a new window. It only affects emails you open from the inbox to read in a new window. Hitting forward or reply or opening a new message to compose still works.
I am honestly not sure what this section is called, which is presumably why I can't figure out how to un-hide it.
Thanks!

In trying to change some individual display settings, I somehow managed to turn off the header for the To/From/Subject line fields on emails when you open them in a new window. It only affects emails you open from the inbox to read in a new window. Hitting forward or reply or opening a new message to compose still works.
I am honestly not sure what this section is called, which is presumably why I can't figure out how to un-hide it.
Thanks!

I did a COPY of some text from a web page, and then did a PASTE into notepad.exe (Windows). The text from each line was duplicated -- on the line! Instead of "Fred", it became "Fred Fred".

I just recently installed Firefox for the first time. It seems nice and quick. The version is reported as: "10.0.1".
I wanted to save some text from a web page, so navigated to that page, selected the text, and pressed the Control-C combination to COPY the selected text to the buffer. For example, the text I selected looked something like this:
Harry
Ron
Hermione
Hagrid
Albus
NOTE: Each line of text has a small icon to the left of the text.
It is not reasonable to COPY and PASTE each line individually, as there can be hundreds of lines of data. I recall, however, that
doing a COPY and PASTE on this data into Microsoft's Excel will produce cells which have the icons included in the cell, but unfortunately one cannot can't get rid of them! At least I've never found a way to remove them, but that's another issue. :)
Once I'd done the COPY operation I switched to a Notepad window and did a PASTE operation. To my surprise, the text from each line was duplicated. It looked like this:
Harry Harry
Ron Ron
Hermione Hermione
Hagrid Hagrid
Albus Albus
Thinking that there might be something unusual about the web page I looked at the source, but it appeared "normal" -- that is, as expected.
Note: I have done this operation several times before, and have never seen this occur before.
Note: In the actual data some of the lines have quoted text in them. Curiously there is weird behavior on these lines. In some cases the entire line is shown only once. (These occur at the top of the line, and the quoted text is at the beginning of the name.)
When quoted text appears "later" in the name, in some cases the quoted text is duplicated, and in other cases the quoted text is missing altogether! I have also noticed an error with the quoted text, and so will be reporting that to the web site which generates the HTML.
Note that each line of "text" is "anchor text", so if I click on a name the browser navigates to a page for that name.
I believe that the problem is that the COPY operating in Firefox is not simply copying the visible text, but also the ALT=
Below is a sample of what the source HTML looks like:
<a class="lnk" target="_blank" href="http://details.aspx?id=Harry">
<img width="16" height="16" alt="Harry" class="tb_icon" src="http://.../Harry.gif"/>
<span>Harry</span></a>
<br/>
(Because of the true length of the lines in the source HTML, I have stripped out the actual URL of the site.)
To make sure I wasn't imaging this difference I repeated the process within Internet Explorer. In that browser I did not get duplicated data.

Try:
*Extended Copy Menu (fix version): https://addons.mozilla.org/firefox/addon/extended-copy-menu-fix-vers/

How can I make a form where text flows from one line to another?

I have created a fillable multi page form in Adobe Acrobat Pro XI. The form was originally created in InDesign, using lines for text. I saved as an interactive pdf, opened in Acrobat Pro, and created a form using the "Create Form" function. This worked great, but some parts of the form have multiple lines that need to be filled out, so the customer would continue typing and the type would flow from one line to the next. Right now the lines are individual fields. Can I easily convert these fields so that the text goes from one line to the next as the person filling out the form types?
Thank you for the help.

The easiest way is to do a slight redesign to get rid of the lines and then use a multiline field instead of multiple single line fields. If you really need to have the lines, you can use an approach that's demonstrated in the following sample: https://workspaces.acrobat.com/?d=AG6oZ3bi3DYHokxDPeWN7A
You may come across attempts to use JavaScript to automatically move to the next field when the previous one is filled-up, but I've never seen this work very well.

Why not all jars picked up by ojdeloy and how to generate build.xml from command line and not JDEV GUI - quick question

Hi All
We have 11.1.1.7 ojdeploy to compile our app.
We notice in the log that not all jars are used in classpath arguments when we explicitly set them up for compilation.
eg:
<path id="classpath">
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar"/>
    <pathelement location="../../Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/a.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/b.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/c.jar"/>
    <pathelement location="interface/public_html/WEB-INF/lib/d.jar"/>
</path>
Log Output -
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/bin/javac
[ora:ojdeploy] -g
[ora:ojdeploy] -Xlint:all
[ora:ojdeploy] -Xlint:-cast
[ora:ojdeploy] -Xlint:-empty
[ora:ojdeploy] -Xlint:-fallthrough
[ora:ojdeploy] -Xlint:-path
[ora:ojdeploy] -Xlint:-serial
[ora:ojdeploy] -Xlint:-unchecked
[ora:ojdeploy] -source 1.6
[ora:ojdeploy] -target 1.6
[ora:ojdeploy] -verbose
[ora:ojdeploy] -encoding Cp1252
[ora:ojdeploy] -classpath
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/resources.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/rt.jar:
[ora:ojdeploy] /path/to/Oracle/Middleware/jdk160_24/jre/lib/jsse.jar:
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/a.jar"/>
    [ora:ojdeploy] /path/to/interface/public_html/WEB-INF/lib/c.jar"/>
1- Is it because it depends on how jpr or jws are configured ?
2- How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?

The first warning is happening because you're stating drivers for input devices without need. You haven't disabled hotplug so evdev gets used instead of kbd. This is normal, and you should change the driver line from kbd to evdev so that whatever options (if any) you've specified for the keyboard get parsed.
The second warning is about you not installing acpid.
The third I have no idea about, but look at the synaptics wiki. None of the (WW) are related to your video card.
And every card that has 2 or more output ports show up as "two cards". You also don't need to specify the pci port in xorg.conf. edit: this is the general case with laptops, might be different for desktops.
When I do lspci -v I get:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d0f0 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dff00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device 0110
Flags: bus master, fast devsel, latency 0
Memory at dfe00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
And it doesn't matter if it errs in trying to sli up with it self. That's just not a possibility.
Last edited by gog (2009-10-15 23:59:49)

Ive had my iPod classic for some time now, and up to now have been using my laptop to sync songs from iTunes. Unfortunatley, the laptop has died and I'm thinking of buying a iPad.....but how do i now get any songs downloaded from iTunes to my iPod?

I've had my iPod classic for some time now, and up to now have been connecting it to my laptop to sync any downloaded tunes from iTunes. Unfortunately, the laptop has died and I'm thinking of buying a iPad.....but how do I now get any songs downloaded from iTunes to my iPod?

If an iPod is set to update automatically it will be associated with a particular library. If you connect that iPod to a different computer or a different library on the same computer you get the the message you are referring to. "The iPod "iPod Name"is linked to another another iTunes music library. Do you want to change the link to this iTunes music library and replace all existing songs and playlists on this iPod with those from this library". To use an iPod on multiple computers you change the update method to "manually manage songs and playlists". You can also use multiple iPods on a single computer so you will be able to connect both of your iPods to your existing iTunes. Connect the new iPod and follow the on screen instructions, iTunes will open and update your iPod.
For info:
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.

How does BT leased line work?

I mean, BT Infinity is Exchange, Cabinet then to your home but the line between the cabinet then exchange is obviously shared with other users. Is BTs leased lines a fibre optic line straight from the exchange into your home? And can you even have BT leased line foir a home or is it only for a business

You can get a fibre optic leased line from many ISP's prepared you are willing to pay the price.
Due to the cost per year it is only usually companies who have them. They are totally different to residential FTTP or FOD offerings have a different SLA and provide minimum guaranteed service.
A simple Google search for "fibre optic leased line" will lead you to the companies that provide them.
Be prepared to pay thousands for the install and yearly cost. If you have money to burn it is the way to go.

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 - var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have unin

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 -> var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have uninstalled and re-installed PS CC. I have opened holding down shift to disable third party plug-ins. I have moved 3rd party plugins to a temp location outside of ps and it still doesn't help. It worked once, and only once and now won't work at all.

Unless your Photoshop question has to do with a download/install error, you should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

New path-layers from every line with pen tool?

Hi! I'm currently using Illustrator CS6 as a test version and when I use the pen tool to make a beaver (school assignment), it all end up in one layer. I want to have a new path-layer from every line with the pen tool, so I can remove lines in the layer panel too. At the moment it's one layer that have a picture of a beaver and I can't see the individual lines I've drawn. When I used CS5 recently I didn't have this problem.
Is it a setting I can change or does it have something to do with the news in CS6?

If you want to see a "layer" for every object change the Layer Panel display by choosing Panel Options from the Layer Panel Menu. In the lower section of the panel options window, make certain Groups and Objects are both checked. You'll then see a "layer" for each object.
I am quoting "layer" here because technically they aren't layers. They look like layers and are in the Layer Panel, but they don't exactly allow the options which actual Layers allow. You will be able to select and move the objects in the panel this way however.

Metro E'net vs Lease Line

Hi, I want to use Metro E'net and
Leased Line effectively within 4 campus
All the centers are having L2/L3 Switches and routers & WAN Links are running on OSPF as on date.
Existing Setup (2500 Desktops + 250 Servers)
1. Seperate Network ID / Internet connections / Servers for all places
2. Seperate VoIP PBX for all the places (This will work for IP / Trunks over WAN)
3. Seperate WAN Links for Connecting Different offices
4. Seperate Adminstrators for all the places
5. Seperate VLAN/VTP Server/Clients
6. Seperate Firewall for all the places
After Commisioned the Metro E'net,
Option: 1
1. Will Metro E'net be reliable having a single vendor ? If not, do we need to get from second vendor also ?
2. Can i merge all in to single network ?? Will this is reliable ???
3. Can we use VLAN/VTP information over Metro E'net ?? If so, is that secured ?? If not, to secure what needs to be done?
4. All the L2/L3 become VTP Server and rest all switches become Client mode
5. Can we forward VoIP Traffic over Metro E'net ?? (For IP we can propogate for Trunks required only WAN.. How do we do that?
6. Will Metro E'net can be used for L2 and L3 Functionality ? (If not, is it possible for split 8 MB to 4MB for 6 MBPS for L2 and 2 MBPS for Routing ?
7. Will QoS can be enabled on Metro E'net ?
8. Can we forward all the centers Internet traffic to single center?
If the above case is worked out, we will not use Leased circuit at all.
Option:2
1. Metro E'net will be used for VLAN/VTP's only
2. All the L2/L3 Becomes VTP Server and others will have Client Mode
3. routing will be used for Routers
Please advise which is good for a Corporate network and how can we impliment
Rgds
Sriram

see if the following link on metro ethernet features and tech provides some info for deploying :
http://www.cisco.com/en/US/netsol/ns341/ns396/ns223/ns227/networking_solutions_white_paper09186a0080103e28.shtml

E1 and leased line.

Hi All,
Can we say E1 an a leased-line is both are same / any difference is there.
If my company take E1 from one Service Provider then how can we get Internet, from where shall I took this service.
Experts can anybody see about it.
Regards,
Naidu.

Leased lines (LL) are available with a wide range of bandwidth starting from Kbps to high speed Mbps lines. E1/T1 are a part of it.
They can be either used to connect sites within intranet or to connect directly internet. Internet leased lines can be again be categorised as dedicated LL to a specific organisation or shared LL between a No. of companies.
So, the criteria of selection would be Bandwidth & Internet LL or intranet LL.

Leased line setup

I have a Cisco 2500 router with IOS version (C2500-I-L), Version 11.2(9.
cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 07094315, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
I have request to configure the router for leased line with speed of 128 kbps.
The serial cable v.35 is connected to its serial interface.
The provider has put the line and TA, DSU is there in the site and bot are connected.
But the router serial interface is not connected to any device is the info I got.
With this information, what is the configuration need to setup in router?
How to configure it?
Thank you.

Hi
Just logon to the router and enable the port on which the leased line is connected.
Once you are connected to the router either through console or telent give no shut on the interface to enable the same.
You need to have the IP Space information from your SP side so that you can configure them on your router.
Or you need to check out the ip space which you can configure between your locations if its a point to point between your locations.
once you are done with the ip config you can verify the connectivity using normal ping command.
if you have the reqd info on your local lan address space you can configure accordingly on your ethernet interface and define the routes accordingly on your router or else a default route via the leased line will do..
regds

Leased Line issues

My organisation leased line is down. Our exchange servers are mainteined locally. We have public ip. Since our leased line is down, we are handicapped of retrieving mails.
i would like to know the options of retrieving mails atleast outside organisation network. I am as well looking for data centre or disaster management solution which can take care of such situations in future.
thanks in advance.

Hi Gitala,
There are primarily two options:
1. Emails gets queued in an external server (cloud based or other Data Centre), while your organization network\server is getting fixed. Once up it delivers all the emails to your Exchange server.
While the network\server is down users don't have access to emails in transit (In or Out the org)
Cloud based Services like Microsoft Exchange Online protection, Websense Email Security, MessageLabs (Symantec). Or a simple server in alternate location running SMTP service would also queue.
2. Have cross-site resilient infrastructure in place. Email services continue without issues.
In your case, you have complete cut off from the internet to the site hosting the email services, hence to have a DR solution, rather High Availability I would say, you need to have:
a. Multiple Internet networks (Network based redundancy) in same site.
b. SiteB with internet connection with lower preference\cost (so that it’s not used in normal conditions),
c. Have a Private Link between both the sites, have DAG members in SiteB with passive copies of critical user DBs.
So in short you can't achieve this without redundancy at each level.

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141

How to send report output to two detinations at a time from command line?

Hi ,
how to send my report to two detinations at a time from command line i.e FILE and Mail ?
i created batchfile in that i mentioned one line for file(DESTYPE=FILE) perpose and another line for mail perpose(DESTYPE=Mail).i don't want to mention to lines.
i want to send my report out put two destinations at a time insted of running two times.
thx in advance.....
raghu

hello,
did you try to use distribution for that ? check out the reports distribution facilities available in 6i.
regards,
the oracle reports team

From leased line to individual laptops

Similar Messages

Maybe you are looking for