From LV 2012 to LV2009

how you guys doing ?
sorry for the duplication of the post . but i have an important issue to solve here . i have alrady attached a vi to be converted from 2010 to LV 2009 and someone has directly replied with the conversion .
Unfortunately the converted VI is never similar to the attached Vi .( looking at the snapshots that i have for the attached VI )
I do not know what is going on .
can you guys please convert me the attached file propoerly ?
Regards.
Bill David
Attachments:
Read raw data mod_HR_detrend_denoise(5).vi ‏98 KB

Hi Bill
Try this one.
The VI you have attached uses lots of toolkits so that might be causing conversion issues.
Kins Regards
Chris | Applications Engineer NIUK
Attachments:
Read raw data mod_HR_detrend_denoise(5).vi ‏86 KB

Similar Messages

Upgrade from SCCM 2012 SP1 CU4 to R2 Fails - Unsupported Upgrade Path

Hi everybody,
I'm currently upgrading our SCCM infrastructure to SCCM 2012 R2 after have finished with the upgrade from SCCM 2012 RTM to SP1 CU4, thus far everything works fine, but when I try to update any
of the site servers, whether CAS or Primary, I'm getting the following error message in the Prerequisites Check:
I've gone through the system requirements and prerequisites over and over again and I can assure you that every possible update, supported OS, feature set, SQL Server, check list, etc,
etc, have been followed as per the official documentation available, however I'm stuck in this point, and surely enough I haven't been able to find out a similar case.Additionally I'm adding
the ConfigMgrPrereq log (the relevant portion of it) in case someone could kindly take a look at it.
<04-25-2014 02:06:46> ******* Start Prerequisite checking. *******
<04-25-2014 02:06:47> ********************************************
<04-25-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade,
minimum supported installed build version is [7804].
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Unsupported upgrade path;    Error;
Configuration Manager has detected that one or more sites in the hierarchy are installed with a version of Configuration Manager that is not supported for upgrade.
<04-25-2014 02:07:00> INFO: This rule only apply to primary site, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Active Replica MP;    Passed
<04-25-2014 02:07:00> INFO: This rule only applies to primary or secondary site in hierarchy, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Parent site replication status;    Passed
<04-25-2014 02:07:00> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:00> ===== INFO: Prerequisite Type & Server: SQL:INFPROSCCMCDB.usersad.everis.int
=====
<04-25-2014 02:07:00> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;
SQL Server sysadmin rights;    Passed
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;    SQL Server sysadmin rights
for reference site;    Passed
<04-25-2014 02:07:00> INFO: CheckLocalSys is Admin of <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Site server computer account administrative rights;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server security mode;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: OS version:601, ServicePack:1.
<04-25-2014 02:07:09> INFO: Target computer is a Windows server.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Unsupported site server operating system version for Setup;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Domain membership;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Pending system restart;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: Return code:0, Major:10, Minor:50, BuildNum:4000
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server version;    Passed
<04-25-2014 02:07:09> INFO: Get Sql edition:Enterprise Edition.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Edition;    Passed
<04-25-2014 02:07:09> INFO: Checking Tcp is enabled to Static port, SQL Server:INFPROSCCMCDB.usersad.everis.int,
Instance:.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Tcp Port;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is limited.
<04-25-2014 02:07:09> INFO: SQL Server memory is limited.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Configuration for SQL Server memory usage;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<04-25-2014 02:07:09> INFO: Installing the central administration site or primary site, requires SQL
Server to reserve a minimum of 8 gigabytes (GB) of memory.
<04-25-2014 02:07:09> WARN: SQL Server minimum memory is 8000 MB.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;    SQL Server process memory allocation;
Warning;    Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by
using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio. For more information about how to set a fixed amount of memory, see
http://go.microsoft.com/fwlink/p/?LinkId=233759.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Case-insensitive collation on SQL Server;    Passed
<04-25-2014 02:07:09> INFO: Check Machine FQDN: <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFO: getaddrinfo returned success.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Validate FQDN of SQL Server Computer;    Passed
<04-25-2014 02:07:09> INFO:CheckSupportedFQDNFormat <INFPROSCCMCDB.usersad.everis.int>
<04-25-2014 02:07:09> INFO: NetBIOS <INFPROSCCMCDB>
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Primary FQDN;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:09> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:09> ===== INFO: Prerequisite Type & Server: SDK:INFPROSCCMCMS.usersad.everis.int
=====
<04-25-2014 02:07:09> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:09> INFO: The rule 'Administrative rights on site system' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: The rule 'Unsupported site server operating system version for Setup' has
been run on server 'INFPROSCCMCMS.usersad.everis.int', skipped.
<04-25-2014 02:07:09> INFO: The rule 'Domain membership' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> INFO: Windows Cluster not found on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Failover Cluster;    Passed
<04-25-2014 02:07:10> INFO: The rule 'Pending system restart' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:10> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Deployment Tools installed;    Passed
<04-25-2014 02:07:10> INFO: CheckAdkWinPeInstalled on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;    Windows Preinstallation Environment
installed;    Passed
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
SMS Provider machine has same domain as site server;    Passed
<04-25-2014 02:07:10> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:10> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:10> ***************************************************
<04-25-2014 02:07:10> ******* Prerequisite checking is completed. *******
<04-25-2014 02:07:10> ******************************************<04-25-2014 02:07:10> INFO: Updating
Prerequisite checking result into the registry
<04-25-2014 02:07:10> INFO: Connecting to INFPROSCCMCMS.usersad.everis.int registry
<04-25-2014 02:07:10> INFO: Setting registry values
If you wonder whether it might be related to this error:
-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade, minimum supported installed build version is [7804].
I confirm that this one site is a secondary one that's attached to a primary site and this log is from the CAS server, I managed to tall it and delete it from that site, but still appears listed
on the CAS management console, any idea how to force the removal of a secondary site that's attached to a primary from the CAS site when it has been removed already from said primary?
I've already tried the
Preinst /DELSITE XXX command but it only works when the site to remove it's attached to the local site and certainly not from a CAS
Finally, the version, build number and everything is correct, no idea what could be the problem, does anybody know a way to bypass this or force the re-evaluation of this rules, I've got
the impression that it's being cached somehow.
Any help would be highly appreciated,
Thank you.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Hello again everybody,
I've finally managed to fix this up, in the end I had to delete those entries manually from the database as Garry suggested. After this was done the upgrade has gone through as expected with no further ado and has finalized already, now moving on to the
primary sites.
If anybody out there is facing the same issue, what I did was to delete those "stubborn" records executing the following statements over the CAS database:
DELETE
FROMServerDataWHERESiteCode='XXX'
DELETE
FROMSC_SiteDefinitionWHERESiteCode='XXX'
And this is pretty much about it. I'd recommend to take a proper backup first though as best practice.
Thank you all anyways for your answers and comments,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Slow applications start from win 2012 file server using win 7 workstations

I hope someone can help me with why applications are slow to load i have replaced a 8 year old server running win 2003 and replaced it with dell t620 running win 2012 r2 it is like 20 times faster but it is slower than the old server. the office has
7 win 7 x64 machines all our applications are running from win 2012 file server. The server is set up as following the server runs with two hyper-v machines one machine runs ad, file server, dhcp, dns and printer server and the other is domino server and remote
desktop.
the machine is more than capable but it is not so i started reading after i run out of ideas. i looked every where but the issue is with the server after trying everything else i did a simple test If i go to the application folder and click on it apps load
instantly if i then type a unc path it takes from instant load to 3 and a bit seconds the same as the workstations. The same speed if I use ip address.
network cards are intel
i would really appreciate if somebody has suggestions that i could try
thank you

Hi,
Do you mean that applications in the application folder start slowly when you access the application folder on the Windows 2012 R2 file server from Windows 7 workstations using UNC path or IP address. Do all the files in the application folder have the same
issue? Please create a shared folder on the file server, then access the shared folder from Windows 7 workstations to check if the issue still exists.
You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol.
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547/en-us
Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

You can try one thing. Follow these steps:
1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
2. Turn off the sound of the TV where you have connected the Apple TV.
3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
This should work correctly

¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1

Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBoho

Hi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

HT3258 I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan.

I have a Brother MFC-J4610DW and can't get it to print from my 2012 iMac over my lan. It works with the macbook pro and iPad. The dialog box states "Setting up 'BrotherMFC-J4610..." Unable to communicate." I worked with the AppleCare guy for a couple of hours. We got it to print via USB but when we switched to ethernet hook up via Time Capsule it won't communicate or install the printer.

Try two things (separately, trying to add the printer in Print & Scan/fax prefs after each):
Reset the printing system:
http://support.apple.com/kb/ht1341
Reset the router - power it off for 15 secs, then back on. Some routers cause these kinds of errors - not recognizing devices are present.

What's the best way to move files from my 2012 iMac to my 2014 MBP?

What’s a good way to move files from my 2012 iMac to my MBP?
I prefer to do graphic work on my 21-inch iMac (2012 version). But when I travel I need to copy files to my 2014 MBP. I learned that my 2012 iMac is too old for use of AirDrop, so I’m copying and moving files with a flash drive. That seems slow and clumsy. Is there a better way?

Target Disk Mode would provide a direct connection between the two Macs:
http://support.apple.com/en-us/HT1661
Nothing simpler than that is available.
Ciao.

VLAN trunking on Hyper-V from SCVMM 2012 R2

hi All,
I have a multiple Hyper-V host, each hyper-V host have 2 physical NIC, 1 Physical NIC connected to Management Network, and the other 1 Physical NIC connected to Production LAN.
We have 5 VLAN ID in Production LAN,
based on my experience we can set VLANID's on Network Adapter in VM level, and also we can set VLAINID's on Virtual Switch but only for single VLAN not multiple VLAN.
The question are as following:
1. Can we set Trunk on Virtual Switch from SCVMM 2012 R2 console? On this article http://technet.microsoft.com/en-us/library/hh848475.aspx, we can set Trunk for VM by using Set-VMNetworkAdapterVlan, not for virtual switch.
2. In SCVMM, we can create Logical Network put the VLAN and subnet, create Logical Switch, port profile, port classification, and associate the Logical Switch to Logical Network. Then we need to add the Logical Network to Hyper-V host. is it means
that the logical switch become Trunk mode?
Regards,
Endrik
Endrik | blog: itendrik.wordpress.com Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Hi Lopez,
Ya, just create vswitch without vlanid, then add vlan id on VM network adapter, and config the switch port behind the server. It's just work.
thanks
Endrik
Endrik | blog: itendrik.wordpress.com Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Text messages and phone calls from March 2012 to date are missing after activating iphone5

text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

How do I find Desk top software from July 2012?

Hi, I have the tour 9630 that crashed and I lost all contacts. I had a back up from July 2012. I updated my desktop software and tried to restore my back-up. The updated desk top software did not recognize my old backup file. I need the software that was available a year ago. Any suggestions where to find it? Thanks for your help.

Do you recall if it was Desktop Software v6?
Archived RIM Desktop Software
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there way to Monitor Live camera from SCOM 2012 R2

Is there way to Monitor Live camera from SCOM 2012 R2 ?
Thanks
Raja R
Raja R

Depends what it is that you want to monitor?
If it's an IP camera that supports SNMP, you can monitor multiple components, depending on the manufacturer (e.g. # images captures, uptime in hours, ...).
If it doesn't support SNMP, you can monitor it through ICMP (ping). Then it's only possible to monitor the state of the device (up/down) depending on wether scom receives a ping reply or not.
If it's a coaxial camera or something else, not connected to a network, it's not possible to monitor the camera itself. Might be possible to monitor the computer/DVR that records the images.

Fetching from SQL 2012

Hi folks,
We are using Oracle application 12.1.1 , Database version 10.2.0.4 on Solaris 10 plaform, and we have Micorsoft SQl server 2012 Database on windows
2008 server service pack 2.
i have created the same tables which i need to fetching data from SQL server database to EBS application i mean oracle Database
So my question is here how can i fetch the data from Oracle application and load into Oracle Database from SQL 2012.
can one suggest me or give any link which tell about details steps.
thanks & Regards.

Hi,
There are 2 different ways you could do this.
1. You could use an Oracle Gateway product - either Database Gateway for SQL*Server (Dg4MSQL) or Database Gateway for ODBC (Dg4ODBC) - and use SQL to select from the SQL*Server tables and put into Oracle tables.
If you have access to My Oracle Support then the following note has links to further details -
Master Note for Oracle Gateway Products (Doc ID 1083703.1)
or this link if you do not -
Oracle Database Gateways
2. Oracle GoldenGate
This can automatically replicate data from SQL*Server to Oracle or vice versa if necessary.
See here for further details -
Oracle GoldenGate
Regards,
Mike

Download Reports from SCCM 2012 Using PowerShell

Hi,
I Wants to Download reports from SCCM 2012 using powershell but couldn't find a way.
I used Invoke-Cmreport but it says no reporting Service point on site code XYZ and server ABC
But Reporting Service is enabled and works fine as i can check/download report manually
Thanks

Hi,
You could have a look at the script in the blog below.
How to Download All Your SSRS Report Definitions(RDL files) Using PowerShell.
http://www.sqlmusings.com/2011/03/28/how-to-download-all-your-ssrs-report-definitions-rdl-files-using-powershell/
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

Missing Event Viewer VM Manager Log after ugrade from SCVMM 2012 SP1 to R2

We recently upgraded from SCVMM 2012 SP1 to SCVMM 2012 R2. After the upgrade, I noticed that the VM Manager log, in the Event Viewer, is missing. I've tried to peruse all of the logs to see if it has been moved/renamed, with no luck. I highly doubt an important
log would be removed without a replacement being available, so I'm curious if it was something that had to be enabled (isn't turned on by default).
I had scripts which relied on the log for VM status changes, Event ID 821 (shut down/running/etc), to keep a last-used database for all of the VMs on our cloud.
Has anyone run in to this problem, or have any idea how I can get get the information that was available in the VM Manager log?
Thank you.

I have a similar problem when migrating VMs from Windows 2008 R2 (Non Clustered) Hyper-V to Windows 2012 Hyper Cluster. I had previously migrated about 100 VMs like this with no problem. It appears since upgrading from VMM SP1 Rollup 4 to Rollup 5 this problem
is happening. All Agents are up to date.
I can migrate VMs in the cluster no problem.
I removed the Windows 2008 R2 Hyper-V host and added it back which allowed the job to at least start but when it gets to the final steps of importing the VM it fails with the same error and references the VMM server.
Others suggest this is a VMM Certificate problem and you can remove the Cluster node and add it back again but I can't do that in a production Cluster with hundreds of VMs. That is not an acceptable solution.
How can we fix this?

From LV 2012 to LV2009

Similar Messages

Maybe you are looking for