From mac mini 120 Go to mac mini 500 Go ?

How can I transfer all my data from mac mini 120 Go to mac mini 500 Go ?

Hello,
The likely best way would be to put the older one into Target mode...
http://support.apple.com/kb/HT1661
Then use Migration Assistant to migrate all your data & settings over.

Similar Messages

  • HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

    Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

    You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
    You might try a 3.5mm to RCA adapter
    from the Mac Mini's headphone jack to the TV's audio input,
    but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
    Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

  • Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

    Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

    Welcome to the Apple Community Lschaef5318.
    You need one Apple TV for each TV.

  • OfficeJet Pro 8500 SLOW Networked via wire Takes 5 mins+ from Mac

    Our OfficeJet Pro takes 5+ mins to spit out a print from Mac OS X (10.5.8) via a wired network connection. Windows machine print to it immediately.

    I had the same problem.  This seems to have worked for me: I configured the printer with a static IP address (see below).
    Then I went to the Print & Fax control panel, hit "+" to add a printer, clicked "IP" and then put in the static address.  It filled in the rest without any problem.
    Giving the printer a static IP address is pretty easy to do if you have experience with networking; you need to choose an address on your subnet (often 192.168.1.xxx) which is not in the range given out by your router's DHCP server (your router's DHCP configuration page should tell you what this is).  The "subnet mask" is almost always "255.255.255.0" .  You can set the configuration either from the printer's web interface, or from the control panel.
    Hope this helps!

  • Can I install OS 10.4 DVD on G3 B&W (CD-ROM only) from Mac Mini with DVD?

    I have G3 B&W 400Mhz 384Mb memory 9Gb hard drive.
    It has CD-ROM, Zip Drive, Firewire, USB & Ethernet and currenty running on OS 10.2.
    I'd like to upgrade to OS 10.4, but it's on DVD.
    I also own Mac Mini G4 with DVD-RW, and I can connect it to G3 with Firewire using Target Drive Mode. G3 recognize Mac Mini as a hard drive.
    Can I install OS 10.4 from Mac Mini? Thank you for your help!

    zakuro7 wrote:
    Can I install OS 10.4 from Mac Mini?
    If you mean the 10.4 DVD is a full-retail copy for any machine, not the version that came with the Mac mini.
    BDAqua wrote:
    ...put the Mini in Target Mode...
    some additional info on Target Mode
    http://support.apple.com/kb/HT1661

  • Widescreen w. DVI from Mac-Mini ?

    I bought a new monitor (Philips 200W6CS) with 1680*1050 pixels , to replace a Belinea with 1200*1000 pix.
    When connected to the mac mini it gave a very clear picture but only for only 5 minutes, ending in sleep-mode, or "no signal".
    The same DVI-cable then still gives signal to other DVI-monitor,
    The new 200W6CS does only work stable on VGA with same but less sharp 1680*1050 pix, .... and still with DVI from PC's.
    The OS here is 10.3.7..
    The video from mac-mini should support 1900*1200 pix...
    What is wrong ??, and how to fix ??
    mac mini, windows PC   Mac OS X (10.3.7)   Philips 200W6CS

    I suspect if you dug into the details of the video timing for 1680 x 1050 you would find the dot clock is above 135 MHz. The mini is not stable above that level with certain DVI receivers. Probably you will have to use a program like DisplayConfigX or SwitchRes X to lower the pixel clock below 135. Here is a thread that may help.
    http://discussions.apple.com/message.jspa?messageID=1707980#1707980

  • Audio output from Mac mini 2009

    I have a 2009 Mac mini with mini dvi and mini display port outputs. Just bought an hdmi tv to use as the display. I understand audio is not supported out of the mini DVI, but what about the mini display port? I was thinking of using a mini display port to hdmi cable. Trying to avoid an additional cable for audio.

    There are two 2009 Mac mini models, Early 2009 and Late 2009. I can tell you for sure that the Early '09 Mac mini does not have integrated audio from the mini-DIsplayPort. It was my understanding that the Late '09 Mac minis built in 2009 also did not have integrated audio, but those made in early 2010 did. The only way to know for sure would be to test it. Apple reports that some m-DP adapters are not adhering to the VESA standard and even Macs with integrated audio in the m-DP do not with these poorly made adapters. Apple is only recommending the Moshi and Griffin adapters.
    http://support.apple.com/kb/ts3065
    If your mini does not have integrated audio you can get a cool adapter that will solve that issue from Monoprice;
    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2
    Dah•veed

  • Audio Output from Mac Mini 2010

    Hello -
    I purchased a mac mini 2010 this weekend for use as a home theater PC. I've got it connected to an Onkyo tx-sr604 a/v receiver via HDMI. I then pass the HDMI signal from the Onkyo to my hdtv, so I think it just passes through. For audio, I use a surround sound system. And, in case it matters, I have a second tv connected via the DVI output on the mini.
    The Onkyo indicates that the audio input signal on the HDMI is PCM Multichannel. When I play movies (e.g., Netfix or DVD) or music (e.g., pandora) on the mini, I don't get any sound on the center channel in multi-channel mode. In direct mode, I only get sound in the front left and right speakers. I'd like to have normal surround sound.
    Is there not a way to get 5.1 surround sound from the mini? Or, am I missing a set up or something? If I connect my receiver to the mini with the digital audio output, will I then receive digital audio?
    Thanks.

    Welcome to the Apple Discussions!
    Mike it is my understanding that if you want 5.1 Surround sound that you must connect the mini directly to the SS system and not pass the audio signal through another device.
    Dah•veed

  • Apple TV has no sound when mirroring from Mac mini,sound works when mirroring from iPad and iPhone

    When I mirror from Mac mini to Apple TV there's no audio from Apple TV to my av amp,it works fine from iPhone and iPad,is there something I need to do in the airplay settings?

    Here's what finally solved my issue:
    https://discussions.apple.com/message/24436903#24436903
    From this Apple Community User:
    https://discussions.apple.com/people/Winston%20Churchill
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)
    Apparently there is an issue if you push the Apple Remote before you set your computer to mirror.  Whatever I did, it had locked it in that state.  Once I stopped mirroring, then went onto the TV screen and restarted the Apple TV (#1 above) it then allowed me to choose mirroring on my Mac and the audio automatically switched from the computer to the TV (making the computer now mute), BTW the volume needs to be maxed on the computer as that will transmit to the TV if your volume is low on the computer.  Then you can raise or lower it the way you want on your TV.
    Yay!
    Hope this helps others.....

  • Can I send music from Mac Mini to my home stereo via Bluetooth connection?

    I recently purchased a new Intel Mini with built in Bluetooth, and I wondering if I could use the Bluetooth transmitter to send iTunes music from the Mini to my home stereo system? If so, I assume that I would need to purchase a Bluetooth receiver of some sort to connect to the audio input on my stereo? Any ideas on which make/model of receiver would work with the Mini?

    Hi.
    Unfortunately, you cannot use the bluetooth module to transmit audio to your stereo.
    Why? Because Tiger does not support the A2DP bluetooth profile (Advanced Audio Distribution Profile), which is required to broadcast stereo audio over bluetooth.
    Apparently, Leopard will support this profile (you'll have to wait for its final specs).
    Meanwhile, there are a couple of wireless (wi-fi) options available, including the Apple Express with AirTunes.
    http://www.apple.com/airportexpress/
    MacMini G4 1.25GHz 1GB   Mac OS X (10.4.9)  

  • Hi guys. gota 2010 mac mini but want to upgrade so i can stream from mac mini to apple tv. but some herd some bad reviews about os x moutain lion. any of it true?? to mountain lion

    hi guys. gota 2010 mac mini but want to upgrade so i can stream from mac mini to apple tv. but some herd some bad reviews about os x moutain lion. any of it true?

    Mountain Lion is the best OS yet, IMHO.

  • Why wireless apple keyboard keep disconnected from mac mini?

    Why is my brand new wireless apple keyboard keep disconnected every 5 to 10 minutes from mac mini? the keyboard's battery is 100% full, and the bluetooth connection seems fine. I'm running 10.8.2. Please help...

    Hi Barry,
    You seem to have solutions ?
    Do you know why iPhone 5 could not be paired by Bluetooth
    with MacBook Pro  Snow Leopard  10.6.8 ?

  • Moving from mac mini to iMac with my backups

    i'm waiting for my iMac and i will use migration assistent to get my account from Mac mini
    but how can i bring my time machine backups on the new iMac, i need to restore older version of some code files
    Is it possible?
    can i do it even moving it to a new external drive?

    Purchase Aperture and use it to fix the links that break when you move the library (assuming that you have the latest iPhoto) or purchae iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  and use it to rebuild a managed library
    One of the many reasons that referenced libraries are not currently recommended with iPhoto is its inability to handle a change in the path to the photos
    LN

  • Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

    Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

    There is no license required for iWeb.  Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Can i migrate mac os and programs from a mini tower to a macbook pro

    can i migrate mac os and programs from a mini tower to a macbook pro

    How to use Migration Assistant to transfer files from another Mac

Maybe you are looking for

  • Can't see month view in iCloud calendar

    When I click on the month view tab at the bottom of the iCloud calendar screen, nothing happens. For that matter, clicking on the day tab doesn't do anything either. As another annoyance, in the week view I see the weeks events that were brought in f

  • Aurora 27.0a2 (2013-11-15) ModernUI - SYNC´ed bookmarks are not visible

    Using ModernUI in Win 8.1 with SYNC seems to work on hand: Typing in keywords associated to URLs displays the right SYNC´ed URLs. But the bookmarks are not displayed. In desktop mode the SYNC runs properly in all aspects. How can I enable the visibil

  • Zero Value Invoice in SAP

    Hi, I have a scenario as I need to show days 15 cost zero, on the invoice, to show the customer we are giving service fee of charge. Is there any way in SAP where one can create a zero value invoice? The standard FoC (Free of Charge) business process

  • Do these headphones work with the iPhone 3G

    http://store.apple.com/us/product/MA662G/B these are the new headphones that came out with the most recent ipods. they are the ones with the volume buttons on the headphones. do they work with the iPhone 3G

  • When I Download a .zip file Safari automatically opens it

    I work with Joomla websites where I need the .zip files to stay zipped when I download them and the new version of Safari seems to open them by default. I can't find a preference to change it. Can you help?