From my Ipad, when I am in Facebook, I can not hear the videos posted to my FB page...Sounds works on all other apps just not my videos on my FB page.

Homesharing has issues that have not been fixed over several versions of itunes and ios.
Only kind of fix is go back through your library and retag it.

Similar Messages

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter

I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

I have a 4s with ios 6 but when I place a call I can't hear the person I' m calling, the volume is high but it's not working. Please help.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

When I make a call, i can't hear the other person, when I get a call, I can hear them and they can't hear me. What's up?

when i make a call, i can't hear the other person but they can hear me. when i get a call, i can hear the caller, but they can't hear me. what's up?

Hello there, Maribelita.
The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

When I make A call I can barely hear the ring or the voice on the other end, but the person i called can hear me ok

when I make a call I can barely hear the ring or the voice of the person on the other end, but they can hear me fine

iPhone Volume Controls
iPhone Sounds & Silence
ÇÇÇ

When i answer my phone i can barely hear the caller, volume is turned up

when i answer my phone i can barely hear the caller, volume is turned up

Hi saintmary82,
If you are having a hard time hearing people through the receiver, take a look at the article below for some suggestions to get it sorted out. Start with cleaning the receiver and making sure your iPhone is up to date. If you continue to have issues, then you may want to contact Apple Support for further assistance.
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
https://support.apple.com/en-us/HT203800
Take it easy,
-Norm G.

Hi I have an iphone 5. When making and receiving calls I can't hear the other person. Has anyone else had this problem?

Hi I have an iphone 5. When making or receiving calls I can't hear the other person? Anyone tell me what is going on?

Try taking a look at this support document to see if the steps there help. If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support

I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

What happens when you try to connect?
Error messages?
Does the iPod see the network?
Have you tried other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections

Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

Garageband is not picking sound from builtin mic (rMBP).
I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
All other apps can use the mic. Dictation, Skype etc. can use the mic!
Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
Can any one help me, Please!
Many thanks!

I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

When 40 subreports are added programmatically to a report the last subreport to be added is shown first while all other reports are in the correct order

I am loading multiple sub-reports (up to 40) into a master report document using the Crystal SDK. This is accomplished by obtaining a reference to the detail area, adding a section to it, and then importing the subreport into the detail area. The master report does not contain a whereclause and contains no data other than the other sections so it is display only once.
When I add the section to the master report I give an index of -1 so that it would always appear on the bottom in the report. This works until I print a report containing exactly 40 reports at which time the last section is shown at the top of the report. All other sections (and hence subreports) appear in the correct order. If I print less than 40 reports all sections are in the correct order. If I print more, the export process crashes as documented in Invalid Section Height when I load the nth subreport
I am using Crystal Reports SDK 13.0.8. Visual Studio 2012. .NET 4.5.2.
The pertinent bit of code is shown below. What might I be doing incorrectly? Is this a Crystal SDK bug?
Thanks,
Ryan
private ReportDocument AddSubReportToParent(string subReportName, string fileName)
    try
        CrystalDecisions.ReportAppServer.ReportDefModel.ISCRArea headerArea = _crystalDocument.ReportClientDocument.ReportDefController.ReportDefinition.ReportHeaderArea;
        CrystalDecisions.ReportAppServer.ReportDefModel.ISCRArea detailArea = _crystalDocument.ReportClientDocument.ReportDefController.ReportDefinition.DetailArea;
        CrystalDecisions.ReportAppServer.ReportDefModel.ISCRArea footerArea = _crystalDocument.ReportClientDocument.ReportDefController.ReportDefinition.ReportFooterArea;
        CrystalDecisions.ReportAppServer.ReportDefModel.Section section = new CrystalDecisions.ReportAppServer.ReportDefModel.Section();
        // strip dots from name (any character that is not a number or letter causes a name/ID runtime error from the Crystal Reports SDK)
        string sectionName = "Section" + subReportName.Replace(".", "");
        section.Name = sectionName;
        section.Kind = CrystalDecisions.ReportAppServer.ReportDefModel.CrAreaSectionKindEnum.crAreaSectionKindDetail;
        section.Width = headerArea.Sections[0].Width;
       _crystalDocument.ReportClientDocument.ReportDefController.ReportSectionController.Add(section, detailArea, -1);
        _crystalDocument.ReportClientDocument.SubreportController.ImportSubreport(subReportName, _configSettings.InputPath + "\\" + fileName, section);
        ReportDocument subreport = _crystalDocument.OpenSubreport(subReportName);
        return subreport;
    catch (Exception ex)
        Logger.ErrorException(ex);
        throw;

Hi Ryan
The search string 'crystal net 40' (search box in top right corner, returns this KBA:
2105208 - ER - CR .NET SDK has a Section limit set to 104 and subreport limit of 40
SP 13 for "SAP Crystal Reports, Developer Version for Visual Studio .NET" can be downloaded here:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Pages that load in all other browsers do not load in Safari

Our Web application uses HTTPS and a Thawte-issued 256-bit AES SSL certificate. In IE, Firefox, and Chrome, the pages of our Web application load absolutely fine. In Safari 4.0.5, the pages do not load in the browser. When looking at the source for the page, there absolutely is content there, but appears to be cut off after a certain number of lines. I've tried a couple of pages, and there doesn't seem to be anything incorrect about the HTML at the line directly after the last one that Safari was able to pull back.
I read in some forums that this may have to do with content chunking and/or variable content lengths. I read in others that it may have to do with serving images from non-HTTPS servers while using an HTTPS connection. I think the former sounds more likely.
Has anyone encountered this issue before? This is not the known "page doesn't load in Safari, but then does when I access it in another browser" issue. It doesn't matter how many times I successfully access the pages in other browsers. They are never rendered in Safari.
Does anyone know how to control the behavior of Safari (or even of Apache HTTP Server 2.0) when it comes to responses of variable content lengths and/or response chunking? Or am I completely off the mark?
Thanks,
Mike

It turns out that Apache's mod_jk.log, which is used to store the output of communications between Apache and Tomcat, had become full. Once it reaches 2 GB, Apache can't write to it anymore. Once we stopped Apache, stopped Tomcat, rotated out that mod_jk.log, and restarted both Apache and Tomcat, our Web application started working again in both Safari and much more reliably in Chrome.

My speaker on my iPhone 4s stopped working. I can't hear my phone ringing, music, apps or use the speaker when having a call. I can still make and take calls when I see them calling but can't hear the phone ring.

This afternoon my speaker on my phone stopped working. I can not hear it ringing when someone call, but if I see someone calling and I answer the call they can hear me and I can hear them fine. I also can't not put the caller on speaker at all , I also can't hear my music or gaming apps. When I turn my phone on or off it does not make a sound as well. I have turned the phone off and turned it off by pressing the top button and home button at the same time and that did not work. I checked the volume and the mute button and the volume is up all the way. I don't know what else to do can you please help me?

I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you

When recording in punch mode- how can i hear the input prior to punch point

When in logic 7- i was able to set a punch point (formerly auto-drop) -- and have a client sing/rap/play to the track-- and before and during the actual selected area for the punch--you could hear the current input as well as the old track.
Now-- when i do the same i logic 9--- i can't hear what my client is doing prior to the punch point-- and neither can they. it only plays the audio track that already exists and only allows us to hear the input once the punch point happens.
Is there a setting somewhere where i can change this?
thank you

You should turn off "Auto input monitoring". I only have L8 and there you find it under Options->audio->Auto Input monitoring. Would guess that its in the same place in L9
Morten

From my Ipad, when I am in Facebook, I can not hear the videos posted to my FB page...Sounds works on all other apps just not my videos on my FB page.

Similar Messages

Maybe you are looking for