From NW 04 SR1(SP9) to SP 16 upgrade - SPAM error
Hi,
I was doing Support pack via spam after NW 04 SR1 on AIX(Oracle).
When i was running SPAM in test Mode for Basis component
1) 10,11,12,13,14 were sucessful & it is failing at Support 15.
The error message is `Function <b>TREX_RFC_CONNECTION_CHECK(TREX_ADMIN_TOOL) does not fit into the existing function group ((TREX_UTIL|24))</b>
I have not installed TREX but the error message points to one of the function module wrongly placed in a function group related TREX.
On clicking SAP Message in action log it says there was problem in moving a function group in totality due to (one function being misplaced in the function group) so i need to delete that function from the function group & create a new function with the same name and record these activites in 2 separate change request and release them in the same order.
It says this could solve the problem. But i am wondering because i have not installed TREX and the support pack is giving the problem due to TREX.
Should ignore the error ?
How should i go about solving the problem.
Kindly help me, it's urgent.
Thanks & Regards,
Satish
I think its a known problem and can be ignored. Please chek the note 672651 Known problem with support packs in Basis 640 .
Thanks
Prince Jose
Similar Messages
-
In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.
Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.
A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium -
Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] -
I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks
If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.
-
I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it at all. I want to come back to the previous version. why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever. It make me think of when ericsson got sold to Sony....drastic PC change.
I would like to have simple instruction on how to downgrade.
It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
HELP!iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB
-
I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks
Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics -
I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.
Sounds like an issue with the iPhoto Library
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.
Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it. -
I upgraded my icloud storage and amount got deducted from my account but yet storage wasn't upgraded. What can i do?
How long did you wait for the systm to catch up to your request for more storage? it can take a little while, up to an hour sometimes I have heard.
If you don't see any more room after waiting a while, try resetting your phone to see if it appears then.
If that doesn't help go here, http://www.apple.com/support/contact/ and see if they can help you out. -
I want to upgrade to CS6 Production Premium suite from CS5.5. Can I use CS6 upgrade made for CS5, or do I have to use upgrade that specifically states for CS5.5.
I am referring to the DVD installation Disks not Cloud. Disk last release, I believe in 2012.
Thank you.at the link i posted i see an upgrade for cs5 and cs5.5.
you can contact adobe support if you don't see that.
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html -
Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I downloaded an album I purhcased a few days ago but one of the album's songs did not download. I received an error message, #499, for which I can get no explanation or interpretation of what error #499 even is (other than generic terms). All my efforts to re-start the download have failed. I've tried several times to download the file to no avail, tried the cloud service to no avail, and re-started the computer to no avail.
My main intention is to, of course, get the download completed. My secondary intention is to, hopefully, bring to the attention of Apple - iTunes staff, the grossly inadequate, dare I say cryptic, error message descriptions iTunes displays.
I can provide the purchase receipt number if it is required.Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M. -
everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is fine. please help. is there soemthing wrong with apple store temporarily?
The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
Argh!
Maybe you are looking for
-
How do I remove an unknown apple id from my iPhone which runs ios 7?
I have an iPhone 4 which has been upgraded to ios 7 and someone logged in with an unknown apple id and now find my iPhone is also turned on. I do not have the password so how do I delete my id? Each time I try it'd ask me for the find my iPhone passw
-
Dispatcher down in Solution Manger 3.2
Hi all, Dispatcher down in Solution Manager 3.2 on Windows 2003 and Oracle 9.2. I have tried looking up on this forum for a solution, but without success. Below are the dev_disp and dev_w0 files dev_disp trc file: "dev_disp", trc level: 1, release: "
-
Display html code in a variable of a pojo failed by JSTL
hai, my pojo contains the following code: Class Pojo{ String htmlFormat="<a href='someurl'>click</a>"; setters and getters} in my jsp displaying this pojo variable <c:out value="${htmlFormat}" /> is displaying it as text but the content is of type h
-
Is there a way to programmatically change the scroll bar position?
I am wanting to programmatically shift my front panel horizontally at a certain point during execution. I need a way of moving the scroll bar automatically. Does anyone have any suggestions? Thanks!
-
Transport Service keeps crashing
Hi All I have been battling this now since Wednesday and cannot seem to get it resolved. Active Directory 2008 R2 Single Exchange 2007 R2 server running Win 2003 R2 (all updates on server as of Wednesday) My Transport rule keeps crashing about every