From OSX 10.8.5 to Mavericks problems updating, downloading and stoping on 1.01gb and not continuing

Trying to upgrade to Maverick from OSX 10.8.5 , downloading and stop at 1.01gb and does not continue. Tried a number of times and then fails to download?????????

Seems share by a couple of people. See https://discussions.apple.com/message/25571394#25571394.

Similar Messages

  • I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

    I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

    Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
    That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
    If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
    Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

  • I cant download ios 6 from itunes its says there was a problem in downloading software

    i cant download ios 6 from itunes its says there was a problem in downloading software

    i have a same problem bigfoo.. i mean whenever i do it...downloading goes halfway but after that it says an error occured

  • I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from ....Try providing more room for peoples questions ...

    I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from my library and my phone, Where are they ????
    I have gone to download again and told i can purchase them again
    But there is no option to download all ready purchased items..
    Can you provide an explanation and solution .

    Are you using the same Apple id as used to originally purchase them
    and are you using iTunes on a PC/Mac

  • Problem in downloading and installing application ...

    hey
     m havng problem in downloading and installing application on mah x2-01 . many times i tried to dwnload whatsapp to mah phn and if the application isz downloaded thn while verifyng the no. it says error unitterupted problem in contacting the server . so knw wht shud i do . i hav also restrore mah phn thn too. plz help me 

    You may verify first your mobile number from this link. Make sure to sign in and under Mobile numbers, click Verify now. 

  • When trying to view a pdf from IE10 I get a small square with an X and not the document.

    When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.

    Hi,
    We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
    I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
    This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
    Before running these steps please make sure yours indeed is the same problem.
    Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
    Let me know how it goes.
    Thank You.

  • How do I delete apps from my app store on my Iphone? not talking about holding down the app and hiting X to delete. talking about cmpletely deleting from the app store on the phone. Under 'PURCHASED" and "NOT ON THIS IPHONE" ?

    How do I delete apps from my app store on my Iphone? not talking about holding down the app and hiting X to delete. talking about cmpletely deleting from the app store on the phone. Under 'PURCHASED" and "NOT ON THIS IPHONE" ?

    Also having the same problems here.
    Yesterday, I have downloaded the APPSGONEFREE and there is one App called the Victorian Mystery that is still free and i downloaded it. After a few minutes it pop up on my iphone homescreen,  it can't be loaded. So I tried to delete it but it cant be deleted. (there is no x mark on top of it). I then use my itunes to synchronize it  through my iphone but it wasnt able to delete it. I then bought the apps at apsstore ( Victorian Mystery), which is not free for today and I synchronize and it cant be installed on my Iphone. I just cant delete the APP. I need help.

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • How can I make an audiobook purchased from another source show up in iTunes as an audiobook and not as music?

    How can I make an audiobook purchased from another source show up in iTunes as an audiobook and not as music?
    They chapters are mp3 files. Changing the genre to "audiobook" or "audiobooks" does help.
    I am sure this question will come up a lot, since the book in question is "Harry Potter and the Deathly Hallows," purchased from Pottermore.com.

    The one thing I would add to the instructions above is that the "Media Kind" menu is on the "Option" pane in the "Get Info" Window. This procedure has allowed me not only to make imported audiobooks show up as audiobooks, but imported podcasts show up as podcasts.

  • How can I get my data from a old iPad to a new iPad using iCloud and not iTunes

    How can I get my data from a old iPad to a new iPad using iCloud and not iTunes

    Restore from the iCloud backup - assuming that you were backing up to iCloud in the first place. If you weren't using iCloud for backup - then you are out of luck.
    If you were backing up to iCloud - you have to erase all contents on the iPad in Settings>General>Reset>Erase all content and settings - before you can restore from the iCloud backup.
    Read this article before you do anything else
    http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/

  • Problem to download and updates apps in I pad 4

    I have problem to download and updates apps in my iPad 4 ,if I tab to download n updates in get stuck to showing waiting ,I did try to sign out >reboot >sign in still I couldn't download and update,even I don't have any thing pending downloads in queue
    Please please please help me

    try holding the app till it shakes. then delete the app. then try to redownload the app.

  • I used to be able to copy or drag and drop links from the address window. Now with the update, only the address is copied or dragged not the link. (Says something about not giving site information). I want to be able to drag and drop or copy links.

    Question
    I used to be able to copy or drag and drop links from the address window. Now with the update, only the address is copied or dragged not the link. (Says something about not giving site information). I want to be able to drag and drop or copy links.

    To be more precise, you can setup a JComponent or JPanel on top of your JavaFX nodes that has a TransferHandler that can convert the (AWT/Swing) images dragged to the app to JavaFX image and then insert it into the underlying node.
    As for the file chooser itselft: ListView and the JavaFX composer can allow you to create one quite easily. TreeView can aslso be used to a lesser extend (still a big buggy). For both of these, there are small bugs in the Cell API that may (or may not) prevent from displaying a proper thumbnail in the cells.
    You can also use a regular JFileChooser if you do not mind the dialog box having a different LnF from the rest of your application.

  • Why when I send messages from my iphone to other iphones, they come up green and not blue? I have all the settings on for I message, but my number comes up grey and not Black? Help someone please!

    Why when I send messages from my iPhone to other IPhones, they come up green and not blue? I have all the settings on for I message b ut my number comes up grey and not black? Please someone help!

    Hi evan191,
    Thanks for using Apple Support Communities.  This article has some steps you can try if your messages aren't sending as iMessages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    If you still can't send or receive iMessages
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    Cheers,
    - Ari

  • Problem in Downloading and Reinstalling OSX Lion via recovery HD

    I am using MBP 13 inch late 2011. I have erased my Macintosh HD. Now trying to reinstall OSx 10.7 using Recovery HD. Mac is perfectly connected to Wifi, as soon as i click "Continue" to reinstall the Mac OsX 10.7, it shows me this message "To Download and Restore Mac OSx, your computer's eligibility will be verified with Apple."
    I clicked "Continue"... But after few seconds of loading it showed me message "Could not fing Installation Information for this machine-Contact Apple Care"
    Why is it so???
    My mac is only 9 months old... And Im in Pakistan.
    Need help or suggestion. How can I download and reinstall OSx again..
    Thanks

    You will need to contact AppleCare about this issue as we are just users to users here and can't authorize a account/download of OS X.
    https://locate.apple.com/country

  • If you're having problems updating firmware and have Windows Media Player 11 B

    I've seen a number of problems with people updating their firmware with WMP installed and it turns out that's the problem. WMP has a bug in it that will not allow the firmware update to recognize the player. So, here's what to do to roll back to a previous version:
    These instructions will only work for Windows XP
    You must be logged on as an administrator or a member of the Administrators group to perform the following procedure.
    . Disconnect any portable music or video devices that might be attached to your computer.
    2. Click Start, and then click Control Panel.
    3. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
    4. Click Windows Media Player , and then click Remove.
    If Windows Media Player is not displayed in the list of currently installed programs, then try the following:
    . At the top of the list, select the Show updates check box.
    2. In the Windows XP - Software Updates section, click Windows Media Player , and then click Change/Remove.
    5. In each of the two confirmation dialog boxes that appear, click OK.
    6. When the rollback process is complete (it might take several minutes), click Restart.
    7. Click Start, and then click Control Panel.
    8. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
    9. Click Windows Media Format Runtime, and then click Remove.
    If Windows Media Format Runtime is not displayed in the list of currently installed programs, then try the following:
    . At the top of the list, select the Show updates check box.
    2. In the Windows XP - Software Updates section, click Windows Media Format Runtime, and then click Change/Remove.
    If you installed a non-US English version of Windows Media Player , the instructions in the dialog boxes that are mentioned in steps 9, 0, and might appear in English.
    0. In the first confirmation dialog box that appears, click OK.
    . In the second confirmation dialog box that appears, select the Do you want to continue with the rollback? check box, and then click OK.
    2. When the rollback process is complete (it might take several minutes to complete), click Restart.
    3. Click Start, and then click Control Panel.
    4. In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
    5. Click Microsoft User-Mode Driver Framework Feature Pack .0.0, and then click Remove.
    6. Follow the instructions that appear in the Software Update Removal Wizard.
    If the Wudf0000 confirmation dialog box appears, click Yes to continue. When the software removal process is complete (it might take several minutes to complete), click Finish.
    If you are still having problems and all else fails, do a System Restore to before WMP was installed.
    *Note: If you remove Windows Media Player and the Windows Media Format Runtime, and then encounter error C00D27D ("A problem has occurred in the Digital Rights Management component. Contact Microsoft product support, you might be able to resolve the problem by installing the Windows Media Format 9.5 Runtime. For information about installing the Runtime, in the Microsoft Knowledge Base, see article 8922, "Update for Windows Media Digital Rights Management-enabled players."
    **You might not be able to roll back to a previous version of the Player if the hidden folder $NtUninstallwmp$ is deleted from your computer. Some non-Microsoft programs (such as CCleaner) delete this folder in an attempt to remove unwanted files from your computer.
    More information here:
    http://www.microsoft.com/windows/win...ionofthePlayer
    Some people have found these instructions to be a solution to the "Player Not Connected" Error when trying to update the firmware. (Your mileage may vary)
    Note to Mods: This would make a nice sticky

    OK. I've been having this problem and have probably read every post there is on the net concerning it. But it doesn't seem to be only a Media Player problem. I was only running Media Player 0 when it happened to me. I found the solution somewhere, I can't remember where, but it worked for me and it was easy.
    Here's what you do:
    . Download BOTH ZenXtra_PCFW_LA__20_08.exe and enXtraP4SAudible_PCFW_LB_2_0_03.exe
    2. Connect the Zen Xtra to your PC.
    3. Run ZenXtra_PCFW_LA__20_08.exe. When the window comes up and says that your device is not connected DON'T do ANYTHING! Just leave it there.
    4. Now run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe
    5. It told me that I already had this version on my device did I still want to load it's I said yes and it went through the whole upgrade and now it works fine.

Maybe you are looking for

  • MIRO: Field Status control per GL master for non-goods receipt invoices

    When posting incoming invoices in FI using FB60, the combination of GL account and CO account assignment are validated and checked against Field Status Group (FSTAG).  Such controls are also in place in MM for purchase requisition (ME51N) and purchas

  • External hard drive not allowing me to read & write

    I have an external hard drive(seagate 250 NTFS format) which i have used on my windows 7 computer now that i'm trying to load the information onto my macbook pro (10.7.4) it will not let me change the permissions nor duplicate the files. How can I be

  • Program or Idoc to import  "Funded Program Group"

    Hi all, I am looking for a program or idoc to import  "Funded Program Group"  (Transaction FM_SETS_FUNDPRG1)  Can you help me ? Michel.

  • Development class for program RFIDESM340 ( Model 340 )

    Hello everyone , I have implemented all the notes pertaining to Model 340 . I have a doubt regarding the development class for report  RFIDESM340 . In the system the development class for report  RFIDESM340   is ' BUPA_TAX ' . I want to confirm if th

  • VLANS on PIX do you need physical

    Is there a way around this? I have to basically assign an IP/subnet just for failover for each interface I want to use as vlans. I have 2 pix fw in lan based failover mode. 5 physical interfaces. state (failover) indside outside dmz dmz2 I have 4 vla