From period and to Period not appering in KE30

While executing the COPA report, From period and to Period boxes are not appearing? can anyone help me in this regard?

i guess it has to something with SETTING.
pls see below link
Add Selection Ranges to KE30
it might help you
thanks
nilesh

Similar Messages

Hello sir Every time I do the process of registration in Mogah Apple Store and the period and the period of the account is lost I do not know what the problem is there are people who enter into my account and change email We ask God to help you have an ac

Hello sir Every time I do the process of registration in Mogah Apple Store and the period and the period of the account is lost I do not know what the problem is there are people who enter into my account and change email We ask God to help you have an account I can not restore it the way I do not know where and I do not speak English Aalit Aalit help me I'm in a state of panic for your reply eagerly awaited
This old Emily Hope you reply and help me [email protected]

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Fiscal Period and MM period.

Hi all,
Can somebody explain the difference b/w Fiscal Period and MM Period in business context. Detail explanation will be helpful.
thanks & regards,
Prashant Rathore.

Dear,
Fiscal Year Definition
Usually a period of twelve months for which a company regularly creates financial statements and checks inventories.
The fiscal year may correspond exactly to the calendar year, but this is not obligatory.
Under certain circumstances a fiscal year may be less than twelve months (shortened fiscal year).
Fiscal Year Structure
A fiscal year is divided into posting periods. Each posting period is defined by a start and a finish date. Before you can post documents, you must define posting periods, which in turn define the fiscal year.
In addition to the posting periods, you can also define special periods for year-end closing.
In General Ledger Accounting, a fiscal year can have a maximum of twelve posting periods and four special periods. You can define up to 366 posting periods in the Special Purpose Ledger.
What is the Use of Fiscal Year
In order to assign business transactions to different time periods, you must define a fiscal year with posting periods. Defining the fiscal year is obligatory.
You define your fiscal year as fiscal year variants which you then assign to your company code. One fiscal year variant can be used by several company codes.
You have the following options for defining fiscal year variants:
Fiscal year same as calendar year
Fiscal year differs from calendar year (non-calendar fiscal year). The posting periods can also be different to the calendar months.
You define your fiscal year variants in Customizing for Financial Accounting as follows: Financial Accounting Global Settings ® Fiscal Year ® Maintain Fiscal Year Variant (Maintain Shortened Fiscal Year)
MM Periods
Closing operations are periodic tasks and can be subdivided in FI as follows:
u2022     Day-end closing
u2022     Month-end closing
u2022     Year-end closing
The closing operations component helps you prepare and carry out the activities required for day-end, month-end, and year-end closing. For this purpose, the system provides a series of standard reports that you can use to generate evaluations and analyses directly from all of the posted account balance. The system helps you carry out the following:
u2022     (Time-based) accruals/deferrals of expenses and revenues
u2022     Creating the balance sheets and P&L statements
u2022     Documenting the posting data
Prerequisites
To carry out the closing operations in G/L accounting, you first need to carry out the closing operations in the subledger accounting areas you are using. These include:
u2022     Accounts receivable and accounts payable accounting
u2022     Inventory accounting
u2022     Asset accounting
u2022     Payroll accounting
Regards,
Syed Hussain.

Significance of IN PERIOD and FOR PERIOD

Hi experts can any one explain me
What is Retro calculation? and significance of IN PERIOD and FOR PERIOD while Retro calculation. If possible please explain with an example.
Thanks in advance.
vamsi.

Hi,
Retro calculation done automatically by SAP \
weh you make changes in master data in back date retro run will take place.
The retroactive accounting date or limit determines the exact date until which master data and time data can be changed in the payroll past. The retroactive accounting limit is based on the following values:
1.Per payroll area (payroll control record): Earliest possible retroactive accounting period
2.Employee hiring date
3.Per Ijndividual employee the feild Earliest personal retroactive accounting date Payroll Status infotype0003.
If the date set for each payroll area differs from the date specified for the employee, the later date is used.
The most important thing to remeber is with regard to retroactive accounting limit for an employee is the hire date of the employee., one can neither run retro from a date prior to the Hiring date nor he can make any changes to master data prior to hiring date
Retro is triggered in a payroll if u hav done master data change of an employee. This means 1) Any change in an infotype triggers retro. 2) Retro is also field dependent in an infotype.
This is configured using view V_T582A under frame "Retro Accounting Trigger".
Also note,
1) Control record - PA03 contains earliest retro date, meaning retro cannot be run previous to that date for all employees in that payroll area.
2) Infotype 0003 contains a field "earliest master data change" meaning during next payroll run retro will run from that particular period onwards for that employee.
3) Infotype 0003 contains a field "Earl.pers. RA date" meaning retro cannot run beyond that date for that employee. (this field values are stored in table PA0003)
regards
dinesh

How to create logical columns for current period and prior period

Hello all.
Is there any way in obiee to create a new logica column in BMM layer that says "CURRENT PERIOD" AND "PRIOR PERIOD" OR ONE SINGLE COLUMN THAT SAYS "PERIOD".
In those columns what I need is if it a current period column it shoould have 03/01/2012-03/31/2012 (this month date range)
and in prior period column I shouldhave 02/01/2012 -02/29/2012(which is previous month date range).These columns I will be using in my reports.
Please help me if we can create any such columns with these conditions/requirements

Hi,I have already created he dynamic variables.But I am not getting how to use those variables and create the new logical columns in bmm layer.
this is what I am trying
case when VALUEOF("Current Month begin date"."Current Month begin date") ='..' and VALUEOF("Current Month end date"."Current Month end date")
='..' then 'current period' end
I don't really understand what I should write case when VALUEOF("Current Month begin date"."Current Month begin date") ='..'??

Review period and Selection period in Enterprise Compensation Management

Dear all,
Anybody can explain about review period and selection period???
Theory says u2026
Review period
The period when manager can plan and submit recommendations through MSS
Selection period
The period which system retrieves the set of objects (Org units, positions and employees) for compensation on portal.
But I am bit confused with thisu2026 when this review will happen? In the beginning?
Say example
If itu2019s a merit increment and 01.01.2011-31.12.2011 is the valuation periodu2026 and we will give the increment in effective 01.01.2012 .Then when it be will the review period and when it will be the selection period?
Anybody can explain with examples plsu2026.
Thanks and Regards
Richard

Hi Richard,
You supplied the correct definitions, but your explanation is not correct.
The Review Period is that period of time the manager can access the system to enter the recommendation for a pay change. In your example it might be 12/15 to 12/31. Only during this period will the review be available for entry. The 1/1 effective date is set in the Item attributes.
The Selection Period indicates for which employees the manager can make recommendations. For example, if a person is transferred on December 20th in the above scenario - you would want the first manager to still create the recommendation and the individual not to appear for the new manager. Thus, you would put 12/15 as the beginning and ending date for the Selection period. Each manager would then see his/her direct reports as of that date in the recommendation area. If you put 1/1/ to 12/31 in this field, any manager of the individual during the year could see and make entries in the recommendation area for the employee.
Hope these examples help.
Paul

I downloaded an app from itunes and i do not know how to open it

i downloaded an app from itunes and i do not know how to open it on my computer...?

You don't open it on your computer.
Apps from the itunes store are for ipod/iphone/ipad.

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

PIONEER DVD-RW DVR-105:
Firmware Revision:          A506
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
yes its a power mac thanks its been a long month and Merry Christmas thanks for checking my question im hoping its a driver problem but not liking some other stuff looking like replace drive

I bought an iPhone from Ebay and it did not turn on so I looked on WinSCP and it said there was NO files PLEASE can someone send me iPhon 4 files!

I bought an iPhone from Ebay and it did not turn on so I looked on WinSCP and it said there was NO files PLEASE can someone send me iPhone 4 files!

No, no one can do that. You need to try restoring it:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

App hung on "waiting"; during update, I lost my wifi connection; now cannot delete to reinstall (no X), syc does not help; itunes store says it is installed and I cannot reinstall; deleting from itunes and synching does not remove "hung app"; HELP

App hung on "waiting"; during update, I lost my wifi connection and the app hung; now cannot delete to reinstall (no X), synching does not help; itunes app store says it is installed, therefore I cannot reinstall; deleting the app from itunes and synching does not reinstall the app on the ipod; the app developers have not helped and told me to check with Apple (which I am doing, since I am past my 90 day tech support). Hoping someone can help with this hung "waiting' app problem.

- First try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next download the app on the computer and try to sync.
- Last, restore from backup.

HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919

HT1937 Can I replace my broken iphone in Bangkok because my iphone is from USA and I am not able to sent it in USA

Can I replace my iphone from Bangkok because my iphone is from USA and I am not able to sent it to USA

Any Apple store in the US will replace as an out of warranty exchange An iPhone 4S is US$199
They do not accept international mail in ,has to be in person

CS11 &CS12- Moving Price and standard price not appering for items

Dear Gurus,
CS11 &CS12- Moving Price and standard price not appering for items.
is it a bug for my system alone\.
or a bug overall in SAP itself.
Pls advise.
Siva

Dear Siva,
Its the standard functionality of SAP.
You will not get any cost related data in the reports like CS11,CS12,CS13.
You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
input field MBWLS.
And also check these SAP notes 177006 and 686509.
Check and revert back.
Regards
Mangalraj.S

HT201407 I bought Iphone 4S from Poland and I can not activate my Iphone in Astana, Kazakhstan. please, Can you help me?

Dear Apple Support,
I bought Iphone 4S from Poland and I can not activate my Iphone in Astana, Kazakhstan and can not use my Iphone in Astana.
Please, Can you help me?
Best Regards,
Danalyk Zhakey

This is not Apple support. It is a user to user forum.
It would seem that you bought a phone that is locked to a carrier in Poland. You would either need to contact this carrier to discuss unlocking, or return or sell the phone and buy an unlocked one.

From period and to Period not appering in KE30

Similar Messages

Maybe you are looking for