From Premiere - Render and Replace ??

I use Soundbooth to modify my audio track from the timeline. When I'm in Soundbooth I save and return to AP but I can not here the change. Is there something I am doing wrong ? ?

is this just a single clip, or you have the entire 18min loaded in AE as comp? does this happen with new projects and all footage or just some? can you render and replace regular clips that aren't AE comps? if its just a few clips of the 18min project, can you render previews in premiere? if its just a few clips, could also render them out in AE and swap them out in premiere instead of using render and replace... or maybe temporarily disable the ae effects/layers while editing in premiere and then turn them back on when ready to export final render.

Similar Messages

My video won't "Render and Replace" in Premiere Pro from linked footage in After Effects

I am using Premiere Pro CC 2014 and After Effects CC 2014. I can't get the video to "Render and Replace" in Premiere Pro after editing the original in After Effects. It just freezes on "Analyzing."
In order to see the footage in real time I have to export it to an mp4 then replace the linked footage. The footage is 18 minutes long and it takes more than 5 hours to export it. After I edit the exported version, I have to export it again, which is another 5 hours. This is taking a really long time. I would rather edit the "Rendered" version What am I doing wrong?
Russell

is this just a single clip, or you have the entire 18min loaded in AE as comp? does this happen with new projects and all footage or just some? can you render and replace regular clips that aren't AE comps? if its just a few clips of the 18min project, can you render previews in premiere? if its just a few clips, could also render them out in AE and swap them out in premiere instead of using render and replace... or maybe temporarily disable the ae effects/layers while editing in premiere and then turn them back on when ready to export final render.

Where did "Render and Replace" in Premiere Elements 13 go?

Hi,
I read in a post from 2008 that said an easy way to export a .WAV file from a single Clip so that you could edit it in another program could be done using "Render and Replace". They suggested: Clip -> Audio Options -> Render and Replace. But my only option in that menu is "Audio Gain...".
This is incredibly frustrating. I sincerely hope I didn't waste my money on a purposely crippled version of Elements that took features away from older versions of the same software.
Any help would be greatly appreciated.

smu johnson
Thanks for the reply.
I think that I have good news for you.
From what you wrote, you have a clip on the Timeline with video and audio components. For the moment we will assume that you have just
that clip on the Timeline.
Go to Publish+Share/Computer/Audio and set Presets = Windows Waveform. That will export just the audio as a .wav file to the computer
hard drive space of your choice. You can re-import the .wav version into your project with the program's Add Media/Files and Folders.
If you had a bunch of clips on the Timeline and wanted to get a wav version of the audio from a particular file....the position the gray tabs of
the Work Area Bar to span just the area of that particular clip and then Publish+Share/Computer/Audio with Presets = Windows Waveform
BUT you need a check mark next to "Share Work Area Bar Only" in the export settings.
Supplemental information if you have a Timeline with more than one clip on it....
Work Area Bar Gray Tab Placement
Shortcuts are the easiest way to place those gray tabs to span the area of the segment for export.
Move the Timeline Indicator to the start of the segment and, as you hold down the Alt key of the computer
main keyboard, press the left bracket key [ Move the Timeline Indicator to the end of the segment and, as
you hold down the Alt key of the computer main keyboard, press the right bracket key ]
And do not forget the other requirement for this situation with more than one clip on the Timeline....in the
export area, check mark next to Share Work Area Bar Only.
Please give it a try and let us know the results when you have time.
Thanks.
ATR
Add On....There is an Adobe Feature Request Bug Report Form which you could file. But you are not likely
to get an individual reply. If any change, you might see it in the next version which you would purchase.
Adobe - Feature Request/Bug Report Form

"Render and replace" now converts to .mov, not audio wav files like before

In previous versions, the "render and replace" functionality allowed you to quickly extract audio from clips and turn them into audio files. Now in CC 2014 the audio gets replaced with another movie file with no video track. This is useless when trying to convert audio clips to .wav format for editing in 3rd party audio apps, which is what made it so great in the first place. Additionally this breaks functionality with PluralEyes, which required that you rendered and replaced segmented video clips like those from the C300. Now PluralEyes rejects the created .mov files with an "unsupported format" error.
Why was this changed? How do I change it back?

I too am now dipping my toes into Premiere Pro CC 2014 and just ran into this as well. Jeez!!!! Using Pluraleyes like you and just need to convert the audio portions to .mov audio. Now what????? I thought there might be 'presets' that were downloadable but I can't easily locate any. Why does Adobe do these things?

How do I remove an incorrect apple ID from an iPad and replace it with the correct one?

How can I remove an incorrect Apple ID from my ipad and replace it with the correct one?

Hello Shy guy,
You can try this:
1. Go to the iTunes Store or App Store
2. Scroll down, there you will see Apple ID: "your email" (below Redeem and Send Gift)
3. Tap on that button
4. Tap on Sign Out
Now you should be able to use another Apple ID.
Cedric

How can I delete an Apple ID from one device and replace it with a different ID on that same device?

How can I delete an Apple ID from one device and replace it with a different ID on that same device?

Tthe brute force method: start with Settings > iCloud and turn off Find My (you will need the password), then change the iCloud ID, then go to the apps such as Messages, FaceTime, etc, and delete the Apple ID and enter the new one.

Render and Replace Audio

I've got a whole stack of individual audio clips all on the same audio line/channel on the timeline which I now need to - Clip > Audio Options > Render And Replace. Can I apply render and replace to all the audio clips on the specific audio line at the one time. This would save me some time. I only need assistance, if you want to dribble on or bless me with a superior complex, save yourself the time and go write on some one else's thread.

D'oh,
Figured it myself! 5 minutes later - To select multiple clips by clicking, use the Selection tool and Shift‑click each clip you want to select. Then it's Clip > Audio Options > Render And Replace.

Render and Replace doesn't open Soundbooth

Mac / PP CS4 (production premium)
Hi, I have a clip in the timeline and I'm right-clicking, choosing Edit in Adobe Soundbooth > Render and Replace but nothing happens.... Soundbooth doesn't open (at all) with the clip to edit. Any suggestion appreciated!
Thanks
-Scott

Thanks for the input...
I tried Edit Orginal (video and audio .mov file) on the file in the bin...
that opens Quicktime Player. I went into Sys Prefs, QT, and tried changing
file associations, etc.
This file I'm trying this with was recorded using OnLocation as a QT . mov
file. That's the one association I can't disable in QT which may be why
I can't open SB but not sure since nothing opens (including QT) when
trying Render and Replace
When I try Edit in Soundbooth/Extract Audio on the file in the bin, that
works as expected, creating the extracted audio files, seen in the PP bin,
and then SB opens with both files ready to be worked on.
Thanks,
-Scott
Scott Babcock
Multimedia Director
Putman Media, Inc.
630-467-1301 ext 479
[email protected]
Twitter: @scottbabcock
LinkedIn: http://www.linkedin.com/in/sbabcock
the_wine_snob <[email protected]>
04/09/09 08:08 PM
Please respond to
[email protected]
To
Scott Babcock <[email protected]>
cc
Subject
New message: "Render and Replace doesn't open
Soundbooth"
putmanmedia,
A new message was posted in the thread "Render and Replace doesn't open
Soundbooth":
http://forums.adobe.com/message/1881993#1881993
Author : the_wine_snob
Email : [email protected]
Profile : http://forums.adobe.com/people/the_wine_snob
Message:

Render and Replace Different Format In Same Sequence

Is there any way to keep the Interpret Footage settings after make Render and Replace option?
I have a sequence setting in 1080 50p with two different formats 50p 720 (interpret in 25p) / 1080 25p, I did a render and replace of the total. And the result was that the rendered footage doesn´t respect me the interpret settings.
Thanks.

Render and Replace is currently designed to transcode the clip and keep the Interpret Footage settings applied to the clip (not burned/rendered in). There is a feature request to burn/render in Interpret Footage (and other effects) to the transcoded clip.
Not ideal, but a possible workaround would be to export the clips with "Import into project" selected in Export Settings, then Replace with Clip to get your desired outcome.

How do I remove one failing hard drive from raid set and replace with new one

Last Friday apparently one of my raid drives started failing.
As I mentioned on this forum I started getting continous beeping.
I was finally able to get the raid working at a degraded level. I ordered a replacement hard drive which is arriving today.
(In the meantime I made twice daily backups of my work.....)
Below was the message I got from the browser based raid software:
Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
(See this earlier thread if you wish!)
http://forums.adobe.com/thread/727867?tstart=0
At one point when I did the checked the browser interface I saw the message Failed and Degraded
As I said, I was able to work over the weekend on the degraded system.
This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
In any case, the new hard drive is arriving today.
What steps should I take to incorporate the new drive into the raid system.
I have one OS drive
and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
Thanks
Rowby

Harm,
Regarding your comment:
Re: How do I remove one failing hard drive from raid set and replace with new one
Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
Step 1: Identify bad drive serial number using Areca's tools
Step 2: Turn off the computer
Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
Cheers,
Jim

HT203261 How do I get rid of small Emoji from my keyboard and replace with Big Emoji.

How do I get rid of small Emoji from my keyboard and replace with Big Emoji. When I go to keyboards neither is listed.

I deleted one type of (small) Emoji and downloaded Big Emoji.
Now when I go to keyboard and select Emoji it's still the small Emoji, even though I deleted that app

How do I remove my apple id from my iPad and replace it with a new one

How do I remove my Apple ID and replaces it with a new one on my ipad

Have you changed your email? And need to change your Apple ID as well?
Before you go further. Please READ and understand these articles from Apple about your Apple ID.
http://support.apple.com/kb/HT2204
http://support.apple.com/kb/HT5621
If you are giving the I
Pad to someone else, you need to turn off find my iPhone and erase the iPad, or delete it from your cloud account.
If there is another reason , I didn't mention, please fill us in so we can give you the right answer, rather than guess and cause you more headaches.

How do you remove a person from a photo and replace her with another person

How do you remove a person from a photo and repalce her with another person.

There are many tool and "tricks" to accomplish this manipulation. However, depending on the image one technique might be more appropriate than an other. And then there is the question of how to do it "skillfully". For example, the shadows in the person that is being substituted might be different than in the original image creating the obviously "photoshopped" look.
Doing an Internet search on your posting title brings up lots of examples.

Random Green Frames in Premiere Render and Export Files

Hello!
I just switched a new MacBook Pro and am having a render issue in Premiere CC. Random green frames pop up sporadically throughout my video. This happens both on my rendered timeline and in the exported file. It seems to affect the clips with heavier color correction. What is happening and how can fix it?
Here's a link to the video on Vimeo. You will see green frames at 00:04, 00:43, 01:03, 01:39, 01:48, 01:58 and 02:25.
I'm editing on Premiere CC. Most of the clips have heavy effects work (motion, fast color corrector, RGB curves and a circle overlay for vignetting). All footage and project files are stored on a WD My Passport 2TB Portable External USB 3.0.
The footage is from a 5D Mark III set for 1080p IPB, so files are .movs.
Exporting in H.264 with the Vimeo HD 1080p 23.976 preset, not changing any of the preset settings. But again, the issue also occurs pre-export, after rendering on the timeline.
MacBook Pro
Retina, 15-inch, Mid 2014
Processor: 16 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GT 750M 2048
Software: OS X 10.9.4 (13E28)
Please help! Thank you!
Stephen

Problem fixed!
Someone from the Adobe support team instructed me to change the renderer to software only mode. This can be changed under File>Project Settings>General. More specifically, I changed it from Mercury Playback Engine GPU Acceleration (Open CL) to Mercury Playback Engine Software Only. I deleted the old render files and reexported without any further issues.
Success!

Using premiere pro and replacing with after effects composition

Hi I am using premiere pro CS4.
I have created a multi camera sequence from 2 cameras, on a separate sequence. when I go to replace the time line footage with an after effects composition, after effects starts up but what I get is the footage in the after effects is from the other camera the exact time length.
what can I do to keep the correct footage from each of the cameras on the time line
Thanks
Rodney

I don't think that is possible at all. It may be a limitation on how multicam works. Since it doesn't produce genuinely separate clips, there is no way for AE to determine which one is actually being used currently. I would imagine, that you would have to insert the relevant snippet as a separate clip to get this working....
Mylenium

From Premiere - Render and Replace ??

Similar Messages

Maybe you are looking for