From red to orange

I am having a problem with my footage. When I drag my clip into the timeline I used to get a red bar across the whole thing. I read about changing my sequence settings to match the footage and the red bar has disapeared but now an orange bar has taken its place. Any suggestions on why this might be happening and what I can look for to change it?
Thanks

Do the settings match EXACTLY?
#28 Having to render every clip in the timeline
Shane's Stock Answer #28: When I put a clip in the timline, I have to render it before it will play. Why?
Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly.
The most important thing you need to do is properly set up your project from the start. It is always advisable to use the Easy Setups. Here is an in-depth article on the topic:
http://www.kenstone.net/fcphomepage/settings_fcp_5balis.html
Also...what are the settings of these clips? Were they captured from tape, or downloaded from the internet?
Have you tried this handy tip (need FCP 5.0)
http://web.mac.com/steelepro/iWeb/steelecuts.com/fcs%20detective/6FD1D5FD-0C56-4 F06-992C-902D00556549.html
Shane

Similar Messages

ITunes could not copy "Beethoven's Symphony No 9 (from "A Clockwork Orange")" to iPhone "Heywood Floyd's iPhone" because the file could not be read or written

Hello, i am having the following problem...
"iTunes could not copy "Beethoven's Symphony No 9 (from "A Clockwork Orange")" to iPhone "Heywood Floyd's iPhone" because the file could not be read or written" [ ... and yes, Heywood Floyd is an avatar name..]
With this...
a. it occurs when I try to synch my iphone with iTunes.
b. I have tested the "Beethoven's Symphony No 9" files that I have found on my iTunes, and my iPhone, as there is a copy of "Beethoven_ Symphony No. 9, _Choral_" folder that is the concert from Bernard Haitink & London Symphony Orchestra;
c. This is where is get weird, a sort of Jack Torrance moment, they only file related to "A clock work orange" is 06 A Clockwork Orange - Ode to Joy.m4p...
So what is happening, and how can I resolve this, as I am not able to synch between my mac and my iPhone....

Check the media source drive for errors.
See also Repair security permissions for iTunes for Windows. Not sure it is relevant but can't hurt.
If iTunes is confused about what media is and is not on the device take these steps:
Backup the device.
Restore as a new device.
Restore from the earlier backup.
tt2

After upgrading to 6.1.3 battery drains fast. Moreover initial charging takes more time to change battery indicator from red to green. any solution ?

After updating the iphone 5 to IOS 6.1.3 battery drains fast. Also it takes more time to change battery status from Red to Green. Any solution?

Anyone?
Thinking I'm S.O.L at this point.

Failed info package, failed request turns from red to green after 1 hour so

hi,
There is a failed info package and if u go to monitor screen, the request status will be red in colour but then the same request after 1 hour or so turn from red to green automatically, why is this, what could be the possible reason??????????

Hi Lieu.
The system automatically sets the status for the load to incorrect if the waiting time is exceeded. The load will still be running even though it might look incorrect, and that is why it turns green when it is complete (and everything is correct).
You can set the waiting time if you go to the monitor -> choose a request -> settings -> waiting time up to status incorrect (ctrl + F9).
Hope it helps (assign points if helpfull!).
BR
Stefan

Changing colour from red to white

I'm working on a catalogue and one of the images (a radiator) needs to be changed from red to white.
I've looked for tutorials and tips on the web but can only find help on how to change from one colour to another such as red to green or blue.
Can anyone help me?

Try here. Link 11 and 12 look promising.
A quick way to get to white: make a new layer and change the blending mode to color. Paint over the radiator with white in your new layer. When you're done, duplicate the layer and make the blending mode for the second layer overlay. Adjust opacity to suit.
J

Why does the light on my battery charger change from green to orange after a few seconds?

Why does the light on my battery charger cable change from green to orange? The battery continues to accept a charge when light turns orange.

Green = not charging.
Orange = charging.
Note that if your laptop is pulling enough power (using CPU and GPU heavily) the light will turn green because the power adapter cannot provide enough power to charge your batteries in addition to keeping the system going.
In fact, you can drain your batteries even with the adapter plugged in with the 17 inch Macbook Pro if you push it hard enough, although I have not noticed this problem with my Retina Macbook Pro.

My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to get factory unlock for iphone 4s in india..iphone 4s is from spain on orange network..

how to get factory unlock for iphone 4s in india..iphone 4s is from spain on orange network..

Well, you've got a real mess on your hands with no easy solution. See, you're gonna have to go back to Spain to activate your phone on Orange's network, then request Orange to unlock it. You won't be able to do anything with that phone but use it as a paperweight until you do so. And no, Apple can't help you, nor can anyone here. Good luck.

Hi All, I have new iphone 4s and want to import my contacts from my old Orange SIM (the contacts have all been copied to SIM). I enter the SIM and select "Import from SIM" in the settings -- Calendar, Contacts etc it look like Ok but nothing copied,helpp

Hi All, I have new iphone 4s and want to import my contacts from my old Orange SIM (the contacts have all been copied to SIM). I enter the SIM and select "Import from SIM" in the settings --> Calendar, Contacts etc it looks like Ok but nothing copied,I tried hundreds of time and waited 2 day but still nothing and I again made sure that I do have the Contacts in the Microsim and it is there but cant import? dunno why???

I have never used it, but have heard good things...
http://www.littlemachines.com/

Canon SX50 True color of a rising moon. Red or Orange

Canon SX50 What settings for capturing red or orange moon rising. Mine comes out white! Ideas?

Karen,
There are several tricks to get the moon shots to come out right. Most people attempt the shot as a night shot, and wind up over exposing the shot. Set your ISO to around 125 to 200. Shutter speed will be around 1/320; you may need to try a little higher or lower, but not less than 1/250. If you are using the zoom for a closer view, you will want to use a higher shutter speed, such as 1/320, to reduce camera shake. Using Shutter priority, let the camera select the aperture. Take several shots and see if you want a little darker (- exposure compensation) of lighter (+ exposure compensation). If you want to get real adventurous, you can set the camera to center weighted or spot metering in the functions menu, but for now see how you do with the basics. Then try the other metering methods I mentioned to see if that helps you get what you have in mind.
Good luck and have fun!
Steve "Smack53"

Changing text from red

I am wondering if I can change the text from red from my main blog page. When I click to the actual blog, its cool, no problem, but on the main page where you can see my last 5 entries they wont change, any advice?
Thanks

Welcome to the discussions buscador!
The red text for the last 5 entries is part of the template. You can only change this by meddling under the iWeb bonnet and changing the xml for the template. See Jim MacCormaic's blog http://web.mac.com/curlytool/iWeb/MyLook/iWeblog/iWeblog.html for info on customising the blog templates.
Michael
iMac 20" Intel Core Duo 2GHz

Sidebar publications from red to blue back to red

Also, my sidebar keeps going back, and forth from red to blue, as if it is published, but I never see anything different in my gallery.
Thanks, Tracy

Open up the text layer properties, add an animator>Fill Color, choose type, HUE usually works better for subtle changes but you can animate one or all color properties. Set keyframes for range selector to change individual letters or words or color to change everything.

Battery changes from red to green

The iPod Photo battery sometimes changes from red to green or green to red is something wrong with the battery. Some times it shows full then a minute later its red.

Also,
If you have used your iPod extensively and it has gone through many partial charge cycles without being completely run down then charged completely (more than 5 hours), your battery status indicator could require calibration.
This has happened with my iPod mini (the battery would appear almost full then almost empty after a minute). To re-calibrate the indicator, just run your iPod down completely (where it shuts down on its own), then charge it completely (5 or 6 hours). This seems to work, and Apple used to recommend doing it every 30 charge cycles or so (not sure if they still do).
~M

DPX output from Red R3Ds - Becomes Very Bright

When I render DPX from Red R3Ds the output appears extremely or harshly bright - as if the gamma suddenly ramps hugely up. How can I correct this?

Just tried this, in fact its hooked up to my other monitor right now and i do still get the red tinge. The picture is perfect apart from this though. Its nice and sharp and clear.
The colour does indeed come on just fine to begin with but once the monitor has done its auto adjust it drops back to the red. I've played with the display settings, different resolutions etc for both displays and still the same.
The thing is, the mac does seem to be sending the correct signal as the monitor is initially correct. Ill try this with a CRT monitor once my battery is charged and if i can find another VGA cable in ill give that a go too.

Officejet 8500A Plus prints purple and brown instead of red and orange

Officejet 8500A Plus prints purple and brown instead of red and orange on diagnostic page after cleaning printheads all three times. I have repalced the cartridges and checked the lind feed. I have used HP cartridges not refills.

Welcome to the forums GuidoB!
I read about the issues you have been having with your printheads and would like to help. I would suggest for you to troubleshoot by using the steps in the guide below. I hope this helps!
Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

From red to orange

Similar Messages

Maybe you are looking for