From single piece to bulk box

Hi Guys,
We work in AFS .Here my scenairo is that first we will producing single piece and then converting it into bulk box pack.
I have done the MRP run and generated the requirements for both the bulk box and single piece . And use single piece job order if have issued all the raw and semi finished products to the particular cost centres , and confirmed it using (CO11N )enter time ticket production order , now the stock for single pieces is shown in MMBE in reserved status now i have to move it to unrestircted and then convert it into bulk box packs .
Hope that u have understood my question.
Regards
Rakesh

Dear,
As I understood, the BOm structure in your case is
0 level - product- BOx
1 level - Single pieces
2 level - Raw materials
Now you have confirmed the Single piece production order and now you need to do MB31 for single piece production order. Then you will see the stock of single piece in MMBE.
The reservation what you see in MMBE for single piece is the reservaton created by Product BOX production order. Hence this reservation will disapper once you conform the production order of product box and issue the single piece material to product box production order.
Hence in MB1A, when you issue the material issue w.r.t to order so that reservation will get consumed against the issue.
please come back if required

Similar Messages

Cp5 - Pasting text from Notepad into a text box

I posted this message in the "Getting Started Forum" but there isn't a whole lot of activity in that forum.
Hopefully someone can help me because I have a lot of text to paste into a lesson.
This seems like such an elementary requirement and I am almost certain that I have done this before but...for some reason, copying text from Windows Notepad into a Captivate 5 text box just isn't working today.
Basically, the paste option is simply not available!
Yes, I can copy paste into other applications; Captivate is the only application that is blocking this Windows function.
If I insert a Text Entry Box, I am able to paste single lines of text (from Notepad) but obviously this isn't going to work as a text box.
Is this by design or has something gone haywire?
Question, how do I get pre-written text (i.e. from Notepad) into Captivate?
Thanks

Shawn,
I have had that happen to me too. I am always copying and pasting into my Captivate projects. But sometimes the paste option is just not available. What I have done, is to save everything and close the application and start it again. Seems there's a lot of little irritating things like that with Captivate, that's corrected with a restart. Hope this helps!
Linda
>>>
From: shawninvancouver <[email protected]>
To:Linda Highlander <[email protected]>
Date: 8/3/2011 10:44 AM
Subject: Cp5 - Pasting text from Notepad into a text box
I posted this message in the "Getting Started Forum" but there isn't a whole lot of activity in that forum.
Hopefully someone can help me because I have a lot of text to paste into a lesson.
This seems like such an elementary requirement and I am almost certain that I have done this before but...for some reason, copying text from Windows Notepad into a Captivate 5 text box just isn't working today.
Basically, the paste option is simply not available!
Yes, I can copy paste into other applications; Captivate is the only application that is blocking this Windows function.
If I insert a Text Entry Box, I am able to paste single lines of text (from Notepad) but obviously this isn't going to work as a text box.
Is this by design or has something gone haywire?
Question, how do I get pre-written text (i.e. from Notepad) into Captivate?
Thanks

How to get the value from select list to text box

Hi,
I have a select list i want to retrieve the value from select list to text box.
How can i do that???
Regards,
Sakthi.

Hi Sakthi,
Yo can use the Java script for that..
Dynamically the value will come into text box.
Use the below script.
<script type="text/javascript">
function disFormItems()
var lReturn = $v(here your select list name)
alert(lReturn);
document.getElementById(here your text box name).value =lReturn; }
</script>Cheers,
Shan

How do I stop Firefox from auto-focusing on text boxes?

How do I stop Firefox from auto-focusing on text boxes? Sometimes as a page is loading, I scroll down the page...only to have the page jump back to where there is a text box, with a blinking cursor, after the page is finished loading. It is an annoying feature and I want to turn it off.

Some pages use an onload event to set the focus to a text area or search field.
You can try NoScript to see if that blocks it.
*NoScript: https://addons.mozilla.org/firefox/addon/noscript/

Report from Single Dimention

Hi Friends,
i want to generate report from single dimension table with out using alias.is it possible?.If it is possible Please answer me.

Hi,
BI server needs one fact table to be joined to produce the query.
If you are having at least one fact table in the RPD then the dimension table will try to create join with the fact table and produce the result with the dimension table only.
But in the physical query it will have the fact table too.
Or else you can create a dummy fact table in the RPD.
Refer-
http://www.rittmanmead.com/2009/08/oracle-bi-ee-10-1-3-4-1-reporting-on-non-transactional-dimension-values-equivalence-of-outer-joins/
Please let me know further and hope this helped/ answered.
Regards
MuRam

Interactive report: Can I exclude a particular column from single row view?

Hi -- I posted on this yesterday (Possible to exclude interactive report column from single row display?
a bit anxious for suggestions, I guess!
I've added a column with edit-link functionality to my interactive report query (that is, the link
is not attached to the database data... it's an additional column and shows an icon). It's also
in addition to the default single row view link. (We need both.)
Unfortunately, the Edit link column shows up in the single row view. I've pared it down as much
as I can: the label is empty, and the null value shows as "-". But an extra row with "-" is pretty
ugly. Is there a way to always, completely exclude this column from the single row view?
I know I could put the edit link on a data column, but:
1) I want the link to always be to the left of the data (and the user can re-order columns)
2) when the user doesn't have edit privileges, the link will need to be disabled or just not
be displayed, and I think that would be a problem if the link were on the data. (true?)
Thanks,
Carol

Please disregard this thread, and the one it refers back to. I see a flaw in the design of what I was attempting to do! Creating the link for Editing as a column means the user could inadvertently not display it, or move it, or... any number of problematic scenarios.
Thanks,
Carol

How can I fill a table of objects from cursor with select * bulk collect???

Hi All, I have a TYPE as OBJECT
create or replace type dept2_o as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
I can fill a table of objects from cursor with out select * bulk collect...., row by row
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
i integer;
begin
i:=0;
dept_o_tab.extend(20);
for rec in (select * from dept) loop
i:=i+1;
dept_o_tab(i):=dept2_o(
deptno => rec.deptno,
dname => rec.dname,
loc =>rec.loc
end loop;
for k IN 1..i loop
dbms_output.put_line(dept_o_tab(k).deptno||' '||dept_o_tab(k).dname||' '||dept_o_tab(k).loc);
end loop;
end;
RESULT
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
But I can't fill a table of objects from cursor with select * bulk collect construction ...
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
begin
dept_o_tab.extend(20);
select * bulk collect into dept_o_tab from dept;
end;
RESULT
ORA-06550: line 6, column 39;
PL/SQL: ORA-00947: not enough values ....
How can I fill a table of objects from cursor with select * bulk collect???

create or replace type dept_ot as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
create table dept
(deptno number
,dname varchar2(14)
,loc varchar2(13)
insert into dept values (10, 'x', 'xx');
insert into dept values (20, 'y', 'yy');
insert into dept values (30, 'z', 'zz');
select dept_ot (deptno, dname, loc)
from dept
create type dept_nt is table of dept_ot
declare
   l_depts dept_nt;
begin
   select dept_ot (deptno, dname, loc)
     bulk collect
     into l_depts
     from dept
   for i in l_depts.first .. l_depts.last
   loop
      dbms_output.put_line (l_depts(i).deptno);
      dbms_output.put_line (l_depts(i).dname);
      dbms_output.put_line (l_depts(i).loc);
   end loop;
end;
/

How to delete data from single field in a database table?

Hi guys,
Plz suggest me How to delete data from single field in a database table?
thnks,
pavan

hi
in addition to abv details..chk this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
regards,
madhu

How to generate multiple idoc's from single appl document

All,
Iam looking for a way to generate multiple idoc's from single appl document (sales order). Based on the plant details on line items in the sales order i have to generate multiple idocs, i.e., send one idoc to each plant entered in sales order line items. any help will be appreciated.
Thanks

Hi,
You can create a Z-program and call Function Module <b>MASTER_IDOC_DISTRIBUTE</b>.
You can make a call to this FM to send the Idoc as many times as u have plants in your Sales Order.
You can call FM <b>IDOC_OUTPUT_ORDRSP</b> to fill the IDoc structure.
Then u can keep the materials of only that plant for which u want to pass on the information.
Thanks,
Utsah Garg.

IMac G5 won't boot in normal and safe mode, but will from single-user mode

Hello everyone,
I'm quite new here, so I try to do my best if you have a question.
Yesterday, someone nearby me had a iMac G5 (Powermac8,1), and he sayd, that the computer sometimes will boot, sometimes not.
I did test it, I thought it was running fine, but when I played some music in iTunes, it was stuck on 9 seconds, and crashed (with a kernel panic). The guy also sayd, that there was nothing important on the computer, so a clean install was fine.
Now, the problem is, that it will not boot in normal mode (without anything pressed on boot), also it won't in safe mode (shift-boot), but it will, when I enter single-user mode, mount the hard drive and exit from single-user mode so it will go futher on booting. Sometimes it will not, and immediately gives you a kernel panic in single-user mode, but it will 90 percent of the time.
Then you've got another problem: when it's running in the normal desktop from single-user mode, it'll be stuck after some time again. If I look into the Kernel Panic file created, most times it's because of Spotlight indexing, so I disabled that.
He also gave me the disks (Apple Hardware Test and Extra Applications, and iMac G5 Mac OS X Install Disks 1-3) that came with the Mac. He sayd that I could use them, but I think he didn't test out the SuperDrive, because when I insert a disk, it will try to read, but it will make 2 same sounds, and quits after 10 tries, when it will spit the cd out. Also normal (audio) disks.
Also, I must hurry with the commands for mounting and exiting in single-user mode, or it will just not boot.
In all cases, after 30-45 seconds from pressing the power button, the fan will start blowing at full speed, and it will stop after the exit command in Single-user mode. That's weird.
I can't do anything with the SuperDrive, I can't normally boot in Mac OS X except for Single-user mode (but I don't think he would like to do that every time the computer boots up), and I have very limited time when Mac OS X arrived on the desktop.
When booting in Verbose mode, it will be stuck on this:
AppleSMU::PMU vers = 0x000d004c, SPU vers = 0x15, SDB vers = 0x01,
(and sometimes ends with a kernel crash by fsck_hfs)
Things I've tried (without any success):
- /sbin/fsck -fy (in single-user mode)
- Disabling Spotlight and mds
If you want some more information, feel free to ask!
Greetings
-MrYoranimo
PS: My main language is Dutch, so my English can be bad at some points.

Thank you for your support! This reply is a little bit late, because I was to the camping this weekend.
The only thing I sure do know, is that the iMac has a bad SuperDrive. That's one problem, but I don't really wanna use it, and you fix everything by Single-user mode and when I get to the desktop to test things and change stuff in the Preference Panes.
What also came to my mind was that there also is a problem with the videocard (driver), because sometimes when I boot into Single-user mode, I can see some white pixels which aren't supposed to be there. And when booting from SUM you can see that some of the colors are different and there are weird patterns on the screen.
I also tried to setup a NetBoot server on this computer (MacBook Mid 2010) with just Lion 10.7.4 on it, but I'm not that expert and I didn't really find the good posts on the Internet, although I tried it with the Server applications and both Server applications and DeployStudio. But I didn't succeed.
I don't really like buying a new FireWire hard disk or external FireWire dvd reader/writer, except if it has USB support, because my MacBook doesn't support FireWire, and I really wanna make use of it then.
If I know more or have fixed it, I will surely post again here with what I did to fix it (if no one else has posted here already ).

Saving from Single User Mode???

ok, so my computer *****, and i just want to reformat the drive and start from scratchville.
is there any way to have a USB Thumbdrive or external hard drive attached and move files from single user mode to the thumb drive to store it. and then once i get my system disk reformat or reinstall the operating system.
i cannot login to my computer any other way besides single user. i have run FSCK and nothing.
all im trying to do is move files so i dont have to worry about losing all of my music, photos, and documents.

WeeManG4:
i cannot login to my computer any other way besides single user.
Have you tried Firewire Target Disk Mode?
cornelius

Repairing disk permissions from single user mode

I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?

Hi,
if you reboot your mac and press Command -R you can start in recovery mode and repair the permissions.
here you can find how to proceed http://support.apple.com/kb/HT4718

I'm running10.8.5. I have tried to install a programme but can't because it is from an unidentified developer. the box says-Your security preferences allow installation of only apps from the Mac App Store and identified developers.how do i install the pro

i'm running10.8.5. I have tried to install a programme but can't because it is from an unidentified developer. the box says-Your security preferences allow installation of only apps from the Mac App Store and identified developers.how do i install the programme

macjack gave you the easiest solution. Need to have admin privilieges to change this option.

When downloading a file, I select "Save File", but I'm unable to check the box label "Do this automatically for files like this from now on." The box is faded out. It's very tedious when you have to select "Save File" everytime

Click on the file to download
The "Open" Dialog Box pops up
Select "Save File"
Try to click on the box labeled ""Do this automatically for files like this from now on."
The box is disable

Hello melanie90, see : [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file#w_changing-download-actions Changing download actions]
thank you

Creating Source systems in two same logical BW systems from single R/3 sys

Hi All,
We are facing an issue while creating Source systems in two same logical BW systems, from single R/3 systems. Our Basis team is telling that if we want to connect the single R/3 system into 2 BW systems with same logical name, we will need to delete the source systems from one BW systems and create in another system. Also they told by doing so it will delete all the transfer rules and PSA table existing in the current BW system, which has the source system connectivity with the R3 system now.
Is this anyway to create the same source systems in two same logical BW systems, from single R/3 systems without deleting the transfer rules?. Also please help us to get anu OSS note or document explaining this in details.
Regards.
Muruganand.K

Hi Muruganand,
I dont think it is possible as connecting one R/3 Source System to two BW Systems.
If you could get the possible solution, please do reply to the post.
Regards,
Kiran

From single piece to bulk box

Similar Messages

Maybe you are looking for