From sleep my laptop wakes up, sleeps, and then wakes up again

Hi,
I installed pm-utils and it has been working very nicely for the most part. I've noticed that when I open my laptop that it seems to wake up (at least the screen appears as it was before closing the lid) but then it very quickly goes back to sleep and I need to press the power button to bring the system back up. It would be nice if it just immediately came back when I open the laptop and skipped the second stage. This is on a Lenovo Carbon X1 if that matters. Does anyone have any advice on this? Thank you very much for any help.
neon

Sounds to me like there are two programs putting your laptop to sleep. One of them is probably systemd (check /etc/systemd/logind.conf and its manpage). Don't know about the other. What DE do you use, if any? Many have their own power management stuff.
BTW: I don't think pm-utils is really needed to suspend your machine to ram. I don't have it installed and my laptops suspend just fine.

Similar Messages

  • I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

    I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
    Using 2 displays, connected via HDMI and thunderbolt
    Been on to support a number of times now - is anyone experiencing the same issues?

    BUMP.
    I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
    kernel[0]: Previous Shutdown Cause: -128
    I don't know if that's related or not, but maybe helps?

  • Mac Pro will not shut down, wakes from sleep and will not start up in safe mode (restarts).

    Wakes from sleep about every 4.5 mins, here is the log from wake from sleep:
    7/30/12 8:43:24.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:43.000 AM kernel[0]: Previous Sleep Cause: 5
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:43.429 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:47:46.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
    7/30/12 8:47:46.000 AM kernel[0]: Intel82574L::setLinkStatus - active  1face000, b
    7/30/12 8:47:50.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d2a8340 {NSUnderlyingError=0x7f8b0c4c1b50 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once  1face001, 0
    7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:53.000 AM kernel[0]: Graphics suppressed 10291 ms
    7/30/12 8:47:53.293 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:47:53.305 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:47:53.308 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::init][75.15] init is complete
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::handleStart][75.15] returning 1
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f93da00][AppleMultitouchHIDEventDriver::start] entered
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::start] entered
    7/30/12 8:47:54.304 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:47:54.308 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
    7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::willTerminate] entered
    7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::stop] entered
    7/30/12 8:48:29.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 8:52:47.000 AM kernel[0]: Previous Sleep Cause: 5
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:47.497 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:52:50.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
    7/30/12 8:52:50.000 AM kernel[0]: Intel82574L::setLinkStatus - active  1face000, b
    7/30/12 8:52:54.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0c084f70 {NSUnderlyingError=0x7f8b10a128d0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/30/12 8:52:56.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Graphics suppressed 10340 ms
    7/30/12 8:52:57.341 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:52:57.354 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:52:57.355 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::init][75.15] init is complete
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::handleStart][75.15] returning 1
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f91b800][AppleMultitouchHIDEventDriver::start] entered
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::start] entered
    7/30/12 8:52:58.354 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:52:58.358 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
    7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::willTerminate] entered
    7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::stop] entered
    7/30/12 8:53:33.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 8:57:51.000 AM kernel[0]: Previous Sleep Cause: 5
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:57:51.435 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:57:54.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
    7/30/12 8:57:54.000 AM kernel[0]: Intel82574L::setLinkStatus - active  1face000, b
    7/30/12 8:57:58.228 AM fseventsd[76]: SLOWDOWN: client 0x7f8a4e007c00 (pid 2824) sleeping due to too many errors (num usleeps 299)
    7/30/12 8:57:58.462 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d295160 {NSUnderlyingError=0x7f8b0b4bd590 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once  1face001, 0
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:01.213 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:01.000 AM kernel[0]: Graphics suppressed 10334 ms
    7/30/12 8:58:01.341 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:58:01.349 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::init][75.15] init is complete
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::handleStart][75.15] returning 1
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f941400][AppleMultitouchHIDEventDriver::start] entered
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::start] entered
    7/30/12 8:58:02.225 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:58:02.229 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
    7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::willTerminate] entered
    7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::stop] entered
    7/30/12 8:58:37.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 9:02:55.000 AM kernel[0]: Previous Sleep Cause: 5
    Will not shut down, restarts at end of shut down. Log:
    7/30/12 8:43:24.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:43.000 AM kernel[0]: Previous Sleep Cause: 5
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:47:43.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:43.429 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:47:46.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
    7/30/12 8:47:46.000 AM kernel[0]: Intel82574L::setLinkStatus - active  1face000, b
    7/30/12 8:47:50.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d2a8340 {NSUnderlyingError=0x7f8b0c4c1b50 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once  1face001, 0
    7/30/12 8:47:52.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:53.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:47:53.000 AM kernel[0]: Graphics suppressed 10291 ms
    7/30/12 8:47:53.293 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:47:53.305 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:47:53.308 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::init][75.15] init is complete
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f8dd800][BNBTrackpadDevice::handleStart][75.15] returning 1
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f93da00][AppleMultitouchHIDEventDriver::start] entered
    7/30/12 8:47:53.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::start] entered
    7/30/12 8:47:54.304 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:47:54.308 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
    7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:48:28.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::willTerminate] entered
    7/30/12 8:48:29.000 AM kernel[0]: [ffffff805f939300][AppleMultitouchDevice::stop] entered
    7/30/12 8:48:29.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 8:52:47.000 AM kernel[0]: Previous Sleep Cause: 5
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:52:47.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:47.497 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:52:50.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
    7/30/12 8:52:50.000 AM kernel[0]: Intel82574L::setLinkStatus - active  1face000, b
    7/30/12 8:52:54.459 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0c084f70 {NSUnderlyingError=0x7f8b10a128d0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/30/12 8:52:56.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:52:57.000 AM kernel[0]: Graphics suppressed 10340 ms
    7/30/12 8:52:57.341 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:52:57.354 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:52:57.355 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::init][75.15] init is complete
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f8e4c00][BNBTrackpadDevice::handleStart][75.15] returning 1
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f91b800][AppleMultitouchHIDEventDriver::start] entered
    7/30/12 8:52:57.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::start] entered
    7/30/12 8:52:58.354 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:52:58.358 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
    7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:53:33.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::willTerminate] entered
    7/30/12 8:53:33.000 AM kernel[0]: [ffffff805f95c600][AppleMultitouchDevice::stop] entered
    7/30/12 8:53:33.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 8:57:51.000 AM kernel[0]: Previous Sleep Cause: 5
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:57:51.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:57:51.435 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:57:54.000 AM kernel[0]: Ethernet [Intel82574L]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,af48,0de1,0200,cde1,3c00]
    7/30/12 8:57:54.000 AM kernel[0]: Intel82574L::setLinkStatus - active  1face000, b
    7/30/12 8:57:58.228 AM fseventsd[76]: SLOWDOWN: client 0x7f8a4e007c00 (pid 2824) sleeping due to too many errors (num usleeps 299)
    7/30/12 8:57:58.462 AM CalendarAgent[202]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8b0d295160 {NSUnderlyingError=0x7f8b0b4bd590 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://david%[email protected]/principals///david%[email protected]/principals/, NSErrorFailingURLKey=https://david%[email protected]/principals///david%[email protected]/principals/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::timeoutHandler - no link - reset the chipset once  1face001, 0
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:01.213 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:58:01.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:01.000 AM kernel[0]: Graphics suppressed 10334 ms
    7/30/12 8:58:01.341 AM configd[17]: network changed: v4(en0-:192.168.1.4) DNS- Proxy- SMB
    7/30/12 8:58:01.349 AM blued[84]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::init][75.15] init is complete
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f930400][BNBTrackpadDevice::handleStart][75.15] returning 1
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f941400][AppleMultitouchHIDEventDriver::start] entered
    7/30/12 8:58:01.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::start] entered
    7/30/12 8:58:02.225 AM configd[17]: network changed: v4(en0+:192.168.1.4) DNS+ Proxy+ SMB
    7/30/12 8:58:02.229 AM mDNSResponder[67]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.1.4)
    7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face001, 0
    7/30/12 8:58:37.000 AM kernel[0]: Intel82574L::setLinkStatus - not active  1face000, 0
    7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::willTerminate] entered
    7/30/12 8:58:37.000 AM kernel[0]: [ffffff805f985a00][AppleMultitouchDevice::stop] entered
    7/30/12 8:58:37.000 AM kernel[0]: Wake reason: ? (Network)
    7/30/12 9:02:55.000 AM kernel[0]: Previous Sleep Cause: 5
    And will not start up in safe mode. I have reset PRAM and SMC. Also restarted with no startup items, no luck. Had the problem of waking from sleep and not shutting down in 10.7, updated to 10.8 hoping for fix, no luck. Any help would be appreciated.
    Thanks

    Hi, this log has some similarities to my ipod touch which seems to be not sleeping properly due to wireless issues. Can I check - are you using a wifi connection - if so have you tried ethernet?
    log entries below ...
    Sep  5 00:28:58 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:5AB0:35FF:FE35:C9B7)
    Sep  5 00:28:58 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.95)
    Sep  5 00:28:58 Peters-iPod configd[44] <Notice>: network configuration changed.
    Sep  5 00:28:58 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 1
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacket() Unable to wake bus; error SDIO Cmd Timeout
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 2
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCmdManager::processPendingList(): Failed to send sync command WLC_GET_BSS_INFO (136) to device, SDIO Cmd Timeout. transID 48928, respLen 1152.
    Sep  5 00:29:27 Peters-iPod kernel[0] <Debug>: AppleBCMWLANNetManager::updateBSSInfo(): WLC_GET_BSS_INFO Failed SDIO Cmd Timeout
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 3
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacket() Unable to wake bus; error SDIO Cmd Timeout
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 4
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCmdManager::processPendingList(): Failed to send sync command WLC_GET_BSS_INFO (136) to device, SDIO Cmd Timeout. transID 48929, respLen 1152.
    Sep  5 00:29:32 Peters-iPod kernel[0] <Debug>: AppleBCMWLANNetManager::updateBSSInfo(): WLC_GET_BSS_INFO Failed SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 5
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::dumpDebugInfo(): CRITICAL ERROR: handleTransferError
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logState(): Tx: seq 185, credit 191, flow 0x0; Rx: seq 167
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logState(): state 0x23, sd-clk +1, sd-rate 20250000 Hz
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::logClockState(): Failed to read HT Clock register, SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): Triggered Watchdog after 6 errors (last was SDIO Cmd Timeout)
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::enableHTClock(): Failed to read HT Clock register, SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::retainClocks() Failed to enable HT Clock, SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::txPacketChain() Unable to wake bus; error SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleTransferError(): SDIO Cmd Timeout, 1, 0
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::disableHTClock(): Failed to write HT Clock register, SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::releaseClocks(): Failed to disable HT clock: SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::doOutputPacketChain(): Packet transmission failure: SDIO Cmd Timeout
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::handleWatchdogTimeout(): Watchdog timer fired
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::watchDogReset(): fStateFlags(0x140E3), thread(00040532)
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::halt()
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc11a7a00, BSSID = 00:18:4d:67:54:12, rssi = -45, rate = 54 (100%), channel =  7, encryption = 0x8, ap = 1, failures =   0, age = 39, ssid[ 9] = "polarbear"
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
    Sep  5 00:29:35 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
    Sep  5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANChipManagerSdio4329::downloadFirmware(): start
    Sep  5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANChipManagerSdio4329::downloadFirmware(): finish
    Sep  5 00:29:36 Peters-iPod kernel[0] <Debug>: BCMWLAN Firmware Version: wl0: Aug 26 2011 02:34:35 version 4.221.54.22
    Sep  5 00:29:36 Peters-iPod kernel[0] <Debug>: nvram file version 4.221.54.22
    Sep  5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): country code set to XX2
    Sep  5 00:29:36 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): Packet glomming ON (mode=7)
    Sep  5 00:29:36 Peters-iPod wifid[13] <Error>: WiFi:[368494176.616677]: Processing link event DOWN
    Sep  5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): There was an existing PNO config, reprogramming
    Sep  5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore:initFirmware(): 2469 RoamScan feature is not enabled for this platform
    Sep  5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::initFirmware(): successful initialization
    Sep  5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore:initFirmware(): 2496 PropTxStatus feature is not enabled for this platform
    Sep  5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(40e3)
    Sep  5 00:29:37 Peters-iPod kernel[0] <Debug>: AppleBCMWLANBusInterfaceSdio::powerOn()
    Sep  5 00:29:37 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 0
    Sep  5 00:29:37 Peters-iPod configd[44] <Notice>: network configuration changed.
    Sep  5 00:29:37 Peters-iPod mDNSResponder[34] <Error>: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.95)
    Sep  5 00:29:37 Peters-iPod apsd[49] <Warning>: <APSCourier: 0x17a190>: Stream error occurred for <APSTCPStream: 0xfe95de0>: Error Domain=NSPOSIXErrorDomain Code=57 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -S-o-c-k-e-t -i-s -n-o-t -c-o-n-n-e-c-t-e-d-" -U-s-e-r-I-n-f-o-=-0-x-1-8-2-5-e-0 -{-}
    Sep  5 00:29:37 Peters-iPod apsd[49] <Warning>: <APSCourier: 0x17a190>: Stream error occurred for <APSTCPStream: 0xfe95e40>: Error Domain=kCFErrorDomainCFNetwork Code=2 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -(-k-C-F-E-r-r-o-r-D-o-m-a-i-n-C-F-N-e-t-w-o-r-k -e-r-r-o-r -2-.-)-" -U-s-e-r-I-n-f-o-=-0-x-f-e-8-e-2-4-0 -{-k-C-F-G-e-t-A-d-d-r-I-n-f-o-F-a-i-l-u-r-e-K-e-y-=-8-}
    Sep  5 00:29:39 Peters-iPod wifid[13] <Error>: WiFi:[368494179.091333]: Processing link event UP
    Sep  5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]:  lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_PSK, key = CIPHER_PMK , don't disassociate    .
    Sep  5 00:29:39 Peters-iPod kernel[0] <Debug>: [139978.345418625]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
    Sep  5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc067f800, BSSID = 00:18:4d:67:54:12, rssi = -49, rate = 54 (100%), channel =  7, encryption = 0x8, ap = 1, failures =   0, age = 1, ssid[ 9] = "polarbear"
    Sep  5 00:29:39 Peters-iPod kernel[0] <Debug>: AirPort: Link Up on en0
    Sep  5 00:29:39 Peters-iPod kernel[0] <Debug>: en0: BSSID changed to 00:18:4d:67:54:12
    Sep  5 00:29:39 Peters-iPod kernel[0] <Debug>: AppleBCMWLANJoinManager::handleSupplicantEvent(): status = 6, reason = 0, flags = 0x0, authtype = 0, addr = 00:00:00:00:00:00
    Sep  5 00:29:40 Peters-iPod kernel[0] <Debug>: [139980.075593458]: AppleBCMWLANNetManager::receivedIPv4Address(): Received address 192.168.0.95, entering powersave mode 2
    Sep  5 00:29:40 Peters-iPod configd[44] <Notice>: network configuration changed.
    Sep  5 00:29:40 Peters-iPod configd[44] <Notice>: Captive: en0: Not probing 'polarbear' (protected network)
    Sep  5 00:29:40 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:5AB0:35FF:FE35:C9B7)
    Sep  5 00:29:40 Peters-iPod mDNSResponder[34] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.95)
    Sep  5 00:29:40 Peters-iPod configd[44] <Notice>: network configuration changed.
    Sep  5 00:29:41 Peters-iPod UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1

  • Freeze, no wake from sleep, and one beep repeats on restart -- intermittent

    My 4 week-old macbook pro 5,3 (2.8GHz, 4GB) started having trouble waking from sleep this week. At first, a hard reboot solved the problem. Yesterday, it would not wake from sleep and the sleep light would blink twice then repeat. Upon hard reboot, this time it emitted a loud beep repeatedly (one single beep, then silence) and could not boot the OS.
    I called Apple and tried all the various reboot key combinations and also inserted the OSX CD and tried to boot from CD. None of this worked, just got the beep beep beep.. They eventually said this indicated a bad logic board and scheduled an appointment at the Genius bar.
    The strange thing is, I was trying to eject the OSX install CD and mistakenly thought that holding down E during reboot would do this (maybe this was some trick from old macs, can't remember..) and it booted up just fine! It worked overnight, then froze again the next day. After hard reboot, it was back to the beeps again. This time, I immediately tried holding down E again and it worked again!
    Obviously I have a major hardware problem, but this at least allowed me to do a time machine backup before taking the computer in for service. It may be a coincidence, but twice in a row certainly is strange. Has anyone had anything like this happen to them? Thanks!
    John
    Message was edited by: jef76

    Hello.
    I've had this issue too. I've found that I can reproduce this issue by putting the computer to sleep when there is major hard drive activity.
    First, reset the PMU. That didn't work for me, but it might for you.
    If that doesn't work, reset the PRAM. That didn't work for me either, but it might for you.
    If neither of those work, here's how I was able to solve the problem:
    1: Open System Preferences and go to Energy Saver.
    2: Find how many minutes it is before the computer goes to sleep. Remember this number; you'll need it later.
    3: Open Terminal.
    4: Type "sudo pmset -a disksleep n" where n is a number greater than zero but less than the number from step 2.
    5: Enter an administrator password at the "Password:" prompt.
    6: Remember in the future not to put the computer to sleep when the hard drive is busy.
    Good luck!

  • Keyboard Viewer window opens up after waking from sleep and screensaver

    I have the MacBook keyboard freezing problem since upgrading to Leopard. One time (at band camp), I opened the Keyboard viewer so I could enter some text prior to rebooting. Now, the keyboard viewer pops up after every wake from sleep, return from screensaver (both password protected), and sporadically when switching/quitting applications.
    I have tried rechecking and unchecking the "keyboard viewer" and "show input menu in menu bar" in System Preferences->International->Input Menu. While not a serious problem, it is rather annoying. How do I get the keyboard viewer to stop opening?
    On a related note, there must be a script or program that is run every time the computer wakes from sleep and password protected screensaver that prompts for a password. Anyone know where this is located?
    Peter

    Ok, I just tried that. I deleted com.apple.KeyboardViewerServer.plist. I then started my screensaver. When I came back in...the Keyboard Viewer was back and there was a new plist file that was created...so, something else must be controlling it.

  • Windows explorer + other windows applications crashing regularly at resume from sleep and hibernate

    Good evening,
    I have a Thinkpad W510 (4319-29G) running Windows 7 Pro 64bit. The system is loaded with the latest software and drives from Lenovo including BIOS 6NET74WW (1.34), upgrade was done Dec 7th (windows update performed Dec 15th).
    The machine has
    - 8Gb RAM
    - nVidia Quadro FX880M, driver version is 8.17.12.5896, 7-9-2010 and video card BIOS is 70.16.5f.0.b
    - dual harddrives,
       - one Seagate Momentus XT 500Gb (ST95005620AS) FW rev SD23 in the main location with C: and some other partitions
       - one Hitatchi 320 Gb (HTS723232L9SA60) FW rev FC4ZC50B in the bay.
    - Intel Centrino Advanced-N 6200 AGN, driver version 13.3.0.24, 7-14-2010
    - Intel 82577LM Gigabit Network Connection, driver version 11.5.10.1030, 7-22-2010
    Recently I have experienced crashes of multiple windows components at resume from sleep and hibernate.
    It seems to happen when swithing location (from work to home) and thus switching from docking station with wired network connection to no dock and wireless network connection (dont know if this has any bearing but anyway).
    In the event viewer I typically have some 6-12 application errors logged. Sample output from event viewer is:
    Log Name: Application
    Source:Application Error
    EventID:1000
    Level:Error
    Logged:2010-12-15 20:30:02
    Task category100)
    Keywords: Classic
    Computer: xxxxxxx (my computername)
    Then for each application the following detailed data is written in event viewer in the general tab:
    #1
    Faulting application name: rundll32.exe_nview64.dll, version: 6.1.7600.16385, time stamp: 0x4a5bc9e0
    Faulting module name: nview64.dll, version: 6.14.10.13527, time stamp: 0x4c35752f
    Exception code: 0xc0000005
    Fault offset: 0x00000000000f0786
    Faulting process id: 0x115c
    Faulting application start time: 0x01cb9bd59882f1f6
    Faulting application path: C:\Windows\system32\rundll32.exe
    Faulting module path: C:\Program Files\NVIDIA Corporation\nView\nview64.dll
    Report Id: b606b17d-0881-11e0-be39-00a0c6000000
    #2
    Faulting application name: taskhost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: nview64.dll_unloaded, version: 0.0.0.0, time stamp: 0x4c35752f
    Exception code: 0xc000041d
    Fault offset: 0x00000001800bb350
    Faulting process id: 0x10c0
    Faulting application start time: 0x01cb9bd5694caebe
    Faulting application path: C:\Windows\system32\taskhost.exe
    Faulting module path: nview64.dll
    Report Id: b6ae8cb2-0881-11e0-be39-00a0c6000000
    #3
    Faulting application name: sidebar.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc9e1
    Faulting module name: nview64.dll_unloaded, version: 0.0.0.0, time stamp: 0x4c35752f
    Exception code: 0xc000041d
    Fault offset: 0x00000001800bb350
    Faulting process id: 0x6f0
    Faulting application start time: 0x01cb9bd5986a397a
    Faulting application path: C:\Program Files\Windows Sidebar\sidebar.exe
    Faulting module path: nview64.dll
    Report Id: b6bd0bd9-0881-11e0-be39-00a0c6000000
    #4
    Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp: 0x4aebab8d
    Faulting module name: nview64.dll_unloaded, version: 0.0.0.0, time stamp: 0x4c35752f
    Exception code: 0xc000041d
    Fault offset: 0x0000000008c3b350
    Faulting process id: 0x1210
    Faulting application start time: 0x01cb9bd569d9ae8e
    Faulting application path: C:\Windows\Explorer.EXE
    Faulting module path: nview64.dll
    Report Id: b6d21ac7-0881-11e0-be39-00a0c6000000
    #5
    Faulting application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541
    Faulting module name: nview64.dll_unloaded, version: 0.0.0.0, time stamp: 0x4c35752f
    Exception code: 0xc000041d
    Fault offset: 0x00000001800ba570
    Faulting process id: 0x11c4
    Faulting application start time: 0x01cb9bd569aa125c
    Faulting application path: C:\Windows\system32\Dwm.exe
    Faulting module path: nview64.dll
    Report Id: b72bfbe8-0881-11e0-be39-00a0c6000000
    #6
    Faulting application name: rundll32.exe_PWMTR64V.DLL, version: 6.1.7600.16385, time stamp: 0x4a5bc9e0
    Faulting module name: nview64.dll_unloaded, version: 0.0.0.0, time stamp: 0x4c35752f
    Exception code: 0xc000041d
    Fault offset: 0x00000001800bb350
    Faulting process id: 0x1450
    Faulting application start time: 0x01cb9bd59995023a
    Faulting application path: C:\Windows\system32\rundll32.exe
    Faulting module path: nview64.dll
    Report Id: b7e4521b-0881-11e0-be39-00a0c6000000
    It seems that a module "nview64.dll" is always the first application to crash. I suspect this has something with graphics to do.
    I dont know if this event triggers the following crashes or if it is so that the display is initialized before the other programs.
    After all crash diagnostic messages have been shown windows explorer restarts and also other applications restart but a lot of system tools in the system tray are gone so a cold start is needed to restore all tools again.
    I really would appreciate any help and suggestions how to fix this really annoying issue.
    Thanks, Anton

    I had a similar issue, as soon as a described even a little bit of it to warrenty support they sent someone to swap the board
    It seems thats the only fix, its been fine since 

  • Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

    Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

    http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
    Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

  • Mac Pro sleeps and then wakes within a second after 10.4.11

    i just updated to 10.4.11 and now when i press the sleep button it will sleep and then wake up within a second.
    any ideas why this is happening, and a way to fix it?

    Sometimes resetting the SMC on your MacPro will fix sleep issues, as that is what settings it maintains.
     Cheers! DALE

  • Downloaded Mountain Lion on my iMac.  Why is it so slow opening up from sleep and taking so long for the wireless mouse to engage?

    Downloaded Mountain Lion on my iMac.  Why is it so slow opening up from sleep and taking so long for the wireless mouse to engage?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Internet goes stale after computer goes to sleep and then needs to be rebooted to function properly

    I mac with retina 5k display
    internet goes stale after computer goes to sleep and then needs to be rebooted to get it working again
    10.10.1 os

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    Itunes 11.1 is for your computer, not your iphone
    It is required in order to sync with ios 7.

  • HT1848 How do I download content and apps from the iTunes Store to my computer, and then sync them to iPhone

    How do I download content and apps from the iTunes Store to my computer, and then sync them to iPhone

    Nevermind I got it
    I went to itunes on my iphone and clicked on purchesed and then went to not on this iphone and downloaded it
    Thank you all so much for you time and sorry im new to this

  • Trying to install the newest version of itunes on my pc and am getting  "program cant start because msvcr80.dll is missing from your computer"  reinstalling doesnt work.  and then it says error 7 (windows error 126)

    trying to install the newest version of itunes on my pc and am getting  "program cant start because msvcr80.dll is missing from your computer"  reinstalling doesnt work.  and then it says error 7 (windows error 126).  Any help would be appreciated.  Using Windows 7 enterprise on an hp Z600

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

    Hi,
    I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to  Broadcast from Crystal reports?
    I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
    What is best option for email/broadcasting for Crystal Reports?
    Your help is appreciated.
    Thanks.
    SVK.

    Hi,
    I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
    Ingo

  • Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
    If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
    To remove the image capture preferences:
    If Aperture is running, quit Aperture,  and log off and on again.
    Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/  then hit return.
    In the window that opens remove "com.apple.ImageCapture.plist"
    and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture  something .plist  remove them too.
    then try again.
    And if that still does not help, remove the Aperture preferences as well:
    ~/Library/Preferences/aperture.plist
    Regards
    Léonie
    P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
    You can reveal it also  from the Finder's "Go" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

  • Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • FB05 - trans to be processed and first line item PK for doc type

    Hi all, Me quite confused of the entry for the following document type in FB05 DG - cust credit memo DR - cust invoice SA- gl acc doc SB - gl acc posting KG - vdr credit memo DZ - customer payment Need the help to let me know for document type above,

  • Add to contacts

    Dear Apple Support, I dont see the "+" button on contacts in my ipad 3, why? How do i add the number in the contacts? Please help me Thank you

  • Error with internet browser while running oracle 10g forms

    Dears, Please do help if someone can. I m using Forms [32 Bit] Version 10.1.2.0.2 (Production) for some project development. I have a form "customers". Last night as i was shutting down my system, everything was OK. Next day as i started oc4j and com

  • Purchase Problem, help

    I tried few times purchase item but credit card problem, how do I reset the thing due to it asked me to contact iTunes support

  • Non-stop scrolling in tab bar and drop-down menus

    Whenever I put my cursor over the tab bar, it scrolls uncontrollably to the end (scrolling backwards doesn't do anything). I've tried to use the keyboard to navigate, but whenever I press Control, the page zooms out rapidly and it's really tedious to