From the End User Point of view
Hi,
Suppose i have scenario like file to idoc, the file should run every day night,when any errors occur at idoc side how can end user know whether it is successfully updated at R/3 side or not. In this scenario exactly what is role of end user what will he do.
Thanks in advance.
Regards,
Prem.S
Hi Prem,
In this case the end user/basis team/ ie basically who ever is responsible for monitoring has to go to transaction WE02/WE05 to monitor if any error has occured in posting the application document.
if any error is there in WE02 then he can go to transaction BD87 and repost the idocs.
Cheers,
Sumit
ps : reward points if that helped u.
Similar Messages
-
Responce times from end-user point of view
Hi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
TomaszHi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
Tomasz -
How do you hide Excluded Roles from the End User (8.1) ?
We have 2 Buisness Roles: Employee and Contractor. They are excluded from each other, meaning if you have one of the roles, you cannot be assigned the other role.
When a user logs into 8.1 to the OOTB "Update My Roles" WF, they see their Available Roles for selection.
These available roles listing includes the excluded roles.
So when a user with the Contractor role logs in, they see the Employee role as an available role.
If the Contractor user tries to add the Employee role, they will get an error due to the role exclusion.
I know it is possible to hide the excluded roles from the end user, but don't know how.
Does anyone know how to hide the excluded roles from users?
Thanks.Hi
I may have misread your first comment but I totally agree with your response.
If the user has capabilities over multiple organizations it will show all roles, whether exclusion or not. (Been confirmed that this is how it is designed to work)
What could be done is when selecting a user is a specific organization, you could have a rule that only shows up the Business roles that are associated with that organization. So although you have the capabilities over all organizations you only see the roles that are available to the organization where the user is your are updating.
An idea anyway
Ian -
Custom workflow... creating a new user from the End User's point of view
Hello I am trying to design a new Request for the end user so that they are able to create a new user. I am having problems with my workflow at this point and keep getting the error "Missing view id." Below is my code please help me out... I am very new to this so be gentle.
P.S. All my fields are named with " view.waveset.* " where * is either accountId or firstname or any attribute I need to set
<Extension>
<WFProcess name='End User Create New User' maxSteps='0'>
<Activity id='0' name='start'>
<Transition to='Create View'/>
<WorkflowEditor x='33' y='5'/>
</Activity>
<Activity id='1' name='Create View'>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='createView'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='type' value='User'/>
</Action>
<Transition to='Update View'/>
<WorkflowEditor x='107' y='81'/>
</Activity>
<Activity name='Update View'>
<Action process='Update View'>
<Argument name='type' value='User'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='options'>
<map/>
</Argument>
</Action>
<Transition to='Provision'/>
</Activity>
<Activity id='2' name='Provision'>
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='provision'/>
<Argument name='user' value='$(view)'/>
<Argument name='options'>
<map/>
</Argument>
</Action>
<Transition to='end'/>
<WorkflowEditor x='296' y='83'/>
</Activity>
<Activity id='3' name='end'>
<WorkflowEditor x='393' y='5'/>
</Activity>
</WFProcess>
</Extension>I ran across the same error today. Since it's been over a month, I assume you've fixed it already or decided you didn't need it at all? What was your fix?
For me, I noted that in the sample directory, a similar "createView" call (in End User Anonymous Enrollment) also includes this argument:
<Argument name='viewId' value='User'/>
When I added that to my createView call, the "Missing view id" error went away, and the user are gets created.
I'm not entirely comfortable with the value specified, though; seems like view IDs should be more unique. I would have thought it should have been something like this instead:
<Argument name='viewId' value='User:$(accountId)'/> -
Create User from the end user pages
I tried to create a user from a end user page and I get this error:
com.waveset.util.WavesetException: WorkflowServices.provision: no view
Anybody knows where the error is?
Thanks!
My workflow:
<!-- MemberObjectGroups="#ID#Top" createDate="Wed May 30 10:36:29 CEST 2007" extensionClass="WFProcess" id="#ID#48FDDE54A046A13F:-14C2A04D:112DBE4AB3D:-7FDA" name="PRUEBA" visibility="runschedule"-->
<TaskDefinition id='#ID#48FDDE54A046A13F:-14C2A04D:112DBE4AB3D:-7FDA' name='PRUEBA' lock='Configurator#1181667176671' creator='Configurator' createDate='1180514189312' lastModifier='Configurator' lastModDate='1181666876671' lastMod='129' taskType='Workflow' executor='com.waveset.workflow.WorkflowExecutor' suspendable='true' syncControlAllowed='true' execMode='sync' execLimit='0' resultLimit='0' resultOption='delete' visibility='runschedule' progressInterval='0'>
<Extension>
<WFProcess name='PRUEBA' maxSteps='0'>
<Activity id='0' name='start'>
<Transition to='activity1'/>
<WorkflowEditor x='88' y='120'/>
</Activity>
<Activity id='1' name='end'>
<WorkflowEditor x='457' y='89'/>
</Activity>
<Activity id='2' name='activity1'>
<ManualAction id='0' name='prueba' syncExec='true' itemType='wizard'>
<WorkItemName>
<ref>probando voy</ref>
</WorkItemName>
<FormRef>
<ObjectRef type='UserForm' id='#ID#48FDDE54A046A13F:-14C2A04D:112DBE4AB3D:-7FC5' name='PRUEBAForm'/>
</FormRef>
</ManualAction>
<Transition to='Create View'/>
<WorkflowEditor x='177' y='266'/>
</Activity>
<Activity id='3' name='Provision'>
<Action id='0' process='Provision'>
<Variable name='op' value='provision'/>
</Action>
<Transition to='end'/>
<WorkflowEditor x='380' y='305'/>
</Activity>
<Activity id='4' name='Create View'>
<Comments>Initialize a new view.</Comments>
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='createView'/>
<Argument name='type' value='User'/>
<Argument name='viewId' value='User'/>
</Action>
<Transition to='Provision'/>
<WorkflowEditor x='247' y='416'/>
</Activity>
</WFProcess>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='PRUEBA'/>
</Properties>
</TaskDefinition>Hi gvivek99,
I have put a link in the �Anonymous User Menu�
<Field name='Test'>
<Display class='Link'>
<Property name='URL' value='user/anonProcessLaunch.jsp?newView=true'/>
<Property name='id' value='PRUEBA'/>
</Display>
</Field>This link start "PRUEBA" Workflow (see my first post).
This workflow call a ManualAction and open PRUEBAForm. In this form I request the accountID, firstname and lastname. But when I submit it, I get the next error:
com.waveset.util.WavesetException: WorkflowServices.provision: no view
<!-- MemberObjectGroups="#ID#Top" extensionClass="Form" id="#ID#48FDDE54A046A13F:-14C2A04D:112DBE4AB3D:-7FC5" lastMod="247" lastModifier="Configurator" name="PRUEBAForm"-->
<Configuration id='#ID#48FDDE54A046A13F:-14C2A04D:112DBE4AB3D:-7FC5' name='PRUEBAForm' lock='Configurator#1182147751359' creator='Configurator' createDate='1180518677968' lastModifier='Configurator' lastModDate='1182147451343' lastMod='247' wstype='UserForm'>
<Extension>
<Form name='PRUEBAForm' noDefaultButtons='true' objectLocationID='objectName=PRUEBAForm&isBegin=true&objectPath=0&objectType=UserForm'>
<Display class='EditForm'/>
<Field name='waveset.accountId'>
<Display class='Text'>
<Property name='title' value='_FM_ACCOUNT_ID'/>
<Property name='size' value='32'/>
<Property name='maxLength' value='128'/>
<Property name='required'>
<Boolean>true</Boolean>
</Property>
</Display>
</Field>
<Field name='global.firstname'>
<Display class='Text'>
<Property name='title' value='_FM_FIRSTNAME'/>
<Property name='size' value='32'/>
<Property name='maxLength' value='128'/>
</Display>
</Field>
<Field name='global.lastname'>
<Display class='Text'>
<Property name='title' value='_FM_LASTNAME'/>
<Property name='size' value='32'/>
<Property name='maxLength' value='128'/>
<Property name='noNewRow' value='true'/>
</Display>
</Field>
<Field name='global.fullname'>
<Expansion>
<cond>
<and>
<ref>global.firstname</ref>
<ref>global.lastname</ref>
</and>
<concat>
<ref>global.firstname</ref>
<s> </s>
<ref>global.lastname</ref>
</concat>
</cond>
</Expansion>
</Field>
<Field name='nextCancelButtons'>
<Field name=':variables.formButton' button='true'>
<Display class='Button'>
<Property name='label' value='Next'/>
<Property name='value' value='Submit'/>
<Property name='command' value='Save'/>
</Display>
</Field>
<Field name=':variables.formButton' button='true'>
<Display class='Button'>
<Property name='label' value='Cancel'/>
<Property name='value' value='Cancel'/>
<Property name='command' value='SaveNoValidate'/>
</Display>
</Field>
<Field name=':complete'>
<Default>
<s>true</s>
</Default>
</Field>
</Field>
</Form>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='PRUEBAForm'/>
</Properties>
</Configuration>Thanks -
Transaction codes from end user point of view
hi all,
I am expecting end user transaction codes of warehouse management.
I am familiar with materials management but looking to learn WM.
regards,
nitin patilHi refer bellow Tcodes,
WM
0.LI21 - Clear the stock from inventory
1.LB01 - Create Transfer Requirement
2.LB02 - Change transfer requirement
3.LB03 - Display Transfer Requirement
4.LB10 - TRs for Storage Type
5.LB11 - TRs for Material
6.LB12 - TRs and Posting Change for MLEat.Doc.
7.LB13 - TRs for Requirement
8.LD10 - Clear decentralized inventory difference
9.LD11 - Clear differences for decentral.sys.
10.LI01 - Create System Inventory Record
11.LI02 - Change System Inventory Record
12.LI03 - Display System Inventory Record
13.LI04 - Print System Inventory Record
14.LI05 - Inventory History for Storage Bin
15.LI06 - Block Storage types for annual invent.
16.LI11 - Enter Inventory Count
17.LI12 - Change inventory count
18.LI13 - Display Inventory Count
19.LI14 - Start Inventory Recount
20.LI20 - Clear Inventory Differences WM
21.LI21 - Clear Inventory Differences in MM-IM
22.LL01 - Warehouse Activity Monitor
23.LLVS - WM Menu
24.LN01 - Number Ranges for Transfer Requirement
25.LN02 - Number Ranges for Transfer Orders
26.LN03 - Number Ranges for Quants
27.LN04 - Number Ranges for Posting Changes
28.LN05 - Number Ranges for Inventory
29.LN06 - Number Ranges for Reference Number
30.LN08 - Number Range Maintenance: LVS_LENUM
31.LP10 - Direct picking for PO
32.LP11 - WM staging of crate parts WM运
33.LP12 - Staging release order parts (WM-PP)
34.LP21 - WM replenishment for fixed bins WM
35.LP22 - Replenishment Planning for Fixed Bins
36.LQ01 - Transfer Posting in Invent. Mgmt
37.LQ02 - Transfer Posting in Invent. Mgmt
38.LS01 - Create Warehouse Master Record
39.LS02 - Change Warehouse Master Record
40.LS03 - Display Warehouse Master Record
41.LS04 - Display Empty Storage Bins
42.LS05 - Generate Storage Bins
43.LS06 - Block Storage Bins
44.LS07 - Block Quants
45.LS08 - Block Storage Bins per Aisle
46.LS09 - Display Material Data for Storage Type
47.LS11 - Change storage bins (multiple proc.)
48.LS12 - Block Storage type
49.LS22 - Change Quants
50.LS23 - Display Quants
51.LS24 - Display Quants for Material
52.LS25 - Display Quants per Storage Bin
53.LS26 - Stock of Material
54.LS27 - Display Quants for storage unit
55.LS28 - Display storage units / bin
56.LS32 - Change storage unit
57.LS33 - Display storage unit
58.LS41 - List of control cycles for WIP loc
59.LT01 - Create Transfer Order
60.LT02 - Create TO for Inventory Difference
61.LT03 - Create TO from Delivery Note
62.LT04 - Create TO from TR
63.LT05 - Process Posting Change Notice
64.LT06 - Create TO for Material Document
65.LT07 - Create TO for mixed storage unit
66.LT08 - Manual addition to storage unit
67.LT09 - ID point function for storage units
68.LT0A - Pre-plan storage units
69.LT0B - Stock Placement of Shipping Units
70.LT0C - Stock Removal of Shipping Units
71.LT0D - Stock Transfer of Shipping Units
72.LT0E - Create Removal TO for 2-Step Picking
73.LT10 - Create Transfer Order from List
74.LT11 - Confirm Transfer Order Item
75.LT12 - Confirm Transfer Order
76.LT13 - Confirm TO for storage unit
77.LT14 - Confirm preplanned TO item
78.LT15 - Canceling transfer order
79.LT16 - Canceling TO for storage unit
80.LT17 - Single Entry of Actual Data
81.LT1A - Change Transfer Order
82.LT21 - Display Transfer Order
83.LT22 - Display Transfer Order / Storage Type
84.LT23 - Display Transfer Orders by Numbers
85.LT24 - Display Transfer Order / Material
86.LT25 - Display Transfer Order / Reference
87.LT26 - Transfer orders for storage bin
88.LT27 - Transfer order for storage unit
89.LT28 - Display Transfer Order / Reference
90.LT31 - Print TO Manually
91.LT32 - Print transfer order for storageunit
92.LT41 - Prepare TRs for Multiple Processing
93.LT42 - Create TOs by Multiple Processing
94.LT43 - Forming groups for deliveries
95.LT44 - Release for Multiple Processing
96.LT45 - Evaluation of reference numbers
97.LT51 - Maintain Missing Stock
98.LT63 - Control: Single Entry of Actual Data
99.LT64 - Single Entry of Actual Data
100.LT72 - Determine 2-step relevance
101.LT73 - Display 2-step
102.LU01 - Create Posting Change Notice
103.LU02 - Change Posting Change Notice
104.LU03 - Display Posting Change Notice
105.LU04 - Selection of Posting Change Notices
106.LX01 - List of Empty Storage Bins
107.LX02 - Inventory List
108.LX03 - Bin Status Report
109.LX04 - Capacity Used
110.LX05 - Block Bins in Bl.Storage w .Time Limt
111.LX06 - Inventory List for Fire Department
112.LX07 - Check storage
113.LX08 - Accident Regulations List
114.LX09 - Overview of All Transfer Requirements
115.LX10 - Activities per Storage Type
116.LX11 - Overview of Documents
117.LX12 - Document Overview: Landscape Format
118.LX13 - Analysis of Differences
119.LX14 - Analysis of Material Transfers
120.LX15 - Selection of Bins for Annual Inventory
121.LX16 - Selection of Bins for Continuous Inventory
122.LX17 - List of Inventory Differences
123.LX18 - Statistics of Inventory Differences
124.LX19 - Inventory Data Takeover by Batch Inp.
125.LX20 - Generate interim storage bins
126.LX21 - Pick List for Several Transfer Order
127.LX22 - Process Inventory from Overview
128.LX23 - Stock comparison IM - WM
129.LX24 - Display of Hazardous Material numbers
130.LX25 - Inventory Status
131.LX26 - Inventory in WM via cycle counting
132.LX27 - Stock levels by shelf life expiry date
133.LX28 - Relevant TO item for ext.system
134.LX29 - Fixed bin supervision
135.LX30 - Overview of WM messages ext.system
136.LX31 - Analysis of print control tables
137.LX32 - Archived transfer orders
138.LX33 - Archived transfer requirements
139.LX34 - Archived posting change notices
140.LX35 - Archived system inventory records
141.LX36 - Archived inventory histories
142.LX37 - Linked objects
143.LX38 - Check Report Customizing Strategy K
144.LX39 - Evaluation Reference No. for 2-S.Pck
145.LX40 - Material Situation Prod. Storage Bin
146.LX41 - Bin Status Report WM/PP Interface
147.LX42 - Evaluation PP Order from WM View
148.LX43 - Consistency Check for Control Cycles MCL9
WM: Material Plcmt/Removal:Selection
149.MCLD - WM: Material flow - Selection
150.MCLH - WM: Movement types - selection -
151.OL01 - Display / change LDK34 (bins)
152.OL02 - Display / change RLPLA (bins)
153.OL03 - Display / change LDK33 (stock)
154.OL04 - Display / change RLBES (stock)
155.OL05 - Display / change LDK30 (mat.whse)
156.OL06 - Display / change LDK31 (mat.type)
157.OL07 - Data transfer stor.bins LDK34->RLPLA
158.OL08 - Data transfer stor.bins RLPLA->B.I.
159.OL09 - Data transfer stor.bins LDK34->LAGP
160.OL10 - Test storage bin data transfer
161.OL11 - Data transfer stock LDK33->RLBES
162.OL12 - Data transfer stock RLBES-> B.I.
163.OL13 - Data transfer stock LDK33->LQUA
164.OL14 - Test stock data transfer
165.OL15 - Data transfer material whse no.view
166.OL16 - Test mat.master data transfer (MLGN)
167.OL17 - Data transfer material storage type
168.OL18 - Test mat.master data transfer (MLGT)
169.OLVS C SD Menu for Master Data
170.VM01 - Create Hazardous Material
171.VM02 - Change Hazardous Material
172.VM03 - Display Hazardous Material
WM-DWM
Decentralized Warehouse Management
1.DZ00 - Introduction to Decentralized Systems
2.LD01 - Repost Communication Document
3.LD02 - Reposting multiple comm.records
4.LD03 - Display Communication Document
5.LD04 - Evaluation of Communication Doc
6.LD05 - Check LDK01 Records (internal call)
7.LD06 - Check LDK02 Records
8.LD07 - Check LDK03 Records
9.LD08 - Check LDK04 Records (internal call)
10.LD09 - Check LDK05 records
11.LN07 - Number Ranges for WM Communic.Rec. -
How can i disable debug information from the end user
By changing debug flag in the url to YES it is possible to view debug information. i want to disable debug information, so that end user could not see debug information. can anyone please tell me the solution.
Sundhar,
when you export the application select Debugging:No
It's one of the available properties together with Build Status, Export Comments, Export Supporting Objects Definitions and so on.
Bye,
Flavio
http://www.oraclequirks.com -
From Google Maps user point of view
Hi,
I come from Android and Google 's services.
I'm really impressed by Windows Phone 8 (and really happy too for my migration).
I have bought a Nokia Lumia 620.
One of more important services in Nokia is Nokia HERE Maps, for sure. Because it can replace a central Google service as Google Maps.
By the way some things are missing and I wonder if they are going to be in Nokia Maps or I will never be a 100% satisfied user and will have to deal with it.
My suggestions are:
1. A lot of POI are missing from maps. In the future can a single user add or correct POI simply from his smartphone?
Communities work well usually. It could be also that every place has a number for its actions, so you can trust for a POI with an higher number of interactions despite of a POI with only one random action.
2. Can I save POI to create a personal map and then view it as a layer on the main map?
For example "restaurants in Milan".
3. Nokia Maps still lack of calendar and contacts integration but, probably, it's more on Microsoft.
Thanks!And a "save to contacts" function too.
-
Suggestion of a topic for masters project from the Comp sci point of view
I want to decide a topic for my masters project. Preferably dont want to use any hardware. Can i simulate an engine simulator without any hardware.
Simulating a simulator. Yes, that sounds like a very theoretical topic ;-)
But seriously, LabVIEW is a great environment for simulation. NI even has a simulation toolkit for simulating control systems. -
Reports User Point of View Question
I created a report that has two grids and the databases are both essbase cubes and have the same dimension names. I am working with Hyperion Reports 9.3. I wanted to link the User Point of View, so that all the user had to do was click on:
1. Period (ie-Apr)
2. Company Code
3. FiscalYear (ie-FY10)
What the Preview User Point of View shows is a drop-down box at the top that has the user select each database connection and change the POV for these dimensions. I'd like to not do that. I'd like the User POV to only have to be selected once.
Note: At a previous job, I am pretty sure I was able to do this without having to change the User POV for each db connection. I know there were two connections but didn't have to change the POV twice. I will provide additional details if needed.
Thanks, TI'm not sure if that will work for me. I already have the 2nd grid hidden from view and there isn't an option to "pull" the POV from another grid that I can see. I even tried merge equivalent prompts in the User Preferences in Workspace but I think that is for prompts only, not user POV.
-
I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.” What do I do? I have opened this up in the past without a problem.
Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
How to view PDF documents because say you must launch adobe reader and accept the end user license
I have a question about to display the PDF documents, could you tell me how can I display it?, I have this message that say before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser
I've got the same issue and I want to use Preview to read pdfs on Safari. At some point I had Acrobat Reader installed, but deleted it and everything associated with it. However no matter what, I get: "Before launching pdf documents in this browser you must launch Adobe Reader and accept the end user license agreement, then quit and relaunch the browser."
This means I am forced to use Reader, when I don't want to. There seems no way to default to Preview to read pdfs on Safari, even after deleting Adobe Reader completely.
Anyone have a clue how to fix this? -
Getting error: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser. I just purchased and installed Adobe acrobat pro for the Mac today.
Hi Tbeirne,
If you just want to save a pdf opened in Safari to your machine use the save as option from within the Reader plugin window. Just click on any of the buttons highlighted in below screenshots to Save a pdf at any location on your machine.
or
To summarize the issue, if you had opened an Internet PDF in a browser plug-in, you must use the save feature in the plug-in, not the Safari File > PDF Export, or File > Save As...
Please let us know if this solution works for you and you are able to save and view PDFs files locally.
Regards,
Shashi -
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
I have tried to relaunch adobe but still keep getting same message. I can however download file and then open it with preview but would like to get this sorted!!Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Why can I view PDF files from the Web on my iMac even after I installed Adobe Reader and accepted the end user license agreement.I then quit the application relaunched it, as instructed snd still the PDF document comes out blank or black. Please advice. Thanks
Chef ReyAre you saying that Adobe Reader or Preview can't read PDF file that you download? Or, are you saying that you can't display PDF files in your Safari broweer? If the latter, then delete any AdobePDFViewer plugins you find in /Library/Internet Plug-ins/ and restart. That should allow Safari to display PDFs in its window. BTW, that's the worst place to view them. Better to download them and use Adobe Reader or Preview.
Maybe you are looking for
-
Install Windows 7: 32 or 64 bit?
My apologies if this question has already been asked and answered already. I didn't seem to find anything definite for what I needed. 13" Unibody MacBook Pro MAC OS X 10.6.2 2.26 GHz Intel Core 2 Duo 2 GB 1067 MHz DDR3 I'd like to install a 64-Bit ve
-
Client Payment Overdue: Take Site Down?
Greetings, I have consolidated billing turned on. One of my clients is overdue on his annual BC payment. Unfortunately, this was automatically charged to me. Since he is taking his sweet time paying up, I need to put the squeeze on. What is the bes
-
Changing screen name in pidgin
i got the pidgin contacts and conversations add-on, which is working great. i went to settings, VoIP and changed the display name, but it isn't changing in the actual conversation. any suggestions?
-
Display Select option in module pool screen
What are the Function modules used to display Select option type fields in a module pool screen?
-
ISight Camera Won't Work stuck on since new update
I just did the recent update to Skype 7.7 and now after a video call the camera stays on but will not work in any other application. I found a solution to get it to work for one more call i have to shut down and unplug the computer wait 15 sec. then