From the Top: How can I fix my iMac after failed 10.4.3 update?

I have an iMac G4 (hemispheric base) with 512 extra ram (from Apple). I used software update to upgrade to 10.4.3 After an apparently successful download, the computer refused to reboot. It would get to the desktop (with my usual icons visible) but then the spinning rainbow wheel would never stop.
== I tried various combinations of rebooting and unplugging. No luck.
== I tried using the Mac OSX install disk to repair permissions. No change.
== I tried using the install disk to repair the disk. It said I had an unrepairable error on my disk.
== I tried booting in safe mode. Computer would always turn itself off.
== I tried booting in single user mode. It would show a text screen but not really start.
== I tried using disk warrior ($100). It performed a lengthy repair. Computer now behaves a bit differently (e.g. in safe mode it gets to the log in screen and then hangs rather than turning itself off and when I try to start as usual I still see my custom desktop background but not my icons) but it still will not start. Also, frighteningly, the disk drive will no longer accept the OSX install dvd -- it just spits it out.
So, I feel stuck. I need some of the data on the computer (including some digital photos of hurricane Wilma damage for insurance purposes) but even if I were willing to do an install and erase, how can I, since the computer does not accept the dvd anymore?
I know I should have fully backed up and repaired the disk with the install disk ahead of the upgrade. I naively believed the download to be routine. However, I do need the data and do need the computer. Can anyone help?
Thanks to everyone.

Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D

Similar Messages

  • My Premiere Pro CC won't drag the audio from the videoclips, how can i fix it?

    I've had the software for 3 months now, about a month ago I updated it and it stoped working properly, everytime I drag a clip to the timeline it cuts off the audio. If I add a song or any kind of audio that doesn't have video it works just fine. I tried uninstalling the software and installing it again from scratch and it didn't work. Does anyone know how can I fix this?

    Hi lllooolllaaa,
    See if this FAQ helps you: Re: FAQ: Why does audio not go to the track where I drop it?
    Thanks,
    Kevin

  • My ipod will not be recognized by my computer,I pluged myipod 2nd g into my computer,went to settings and erased all contents now all i get is thepicture of a usb cord and itunes at the top how can i fix this?

    My ipod is displaying a usb cable at the top of it is itunes,i get a message on my computer saying the usb is not reconized.my ipod will not go back to the original when i unplug it from the computer, help

    See Here...
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    This will not necessarily work if the Device has been modified.

  • I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

    I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
    I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

    On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
    But there is a plugin for ID that makes this possible. Never tried it myself.
    https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • I have iPhone 4, it was working just fine..no I have a problem: it keeps searching for the network and then says no network..it was open to clean from inside..how can I fix the problem

    I have iPhone 4, it was working just fine..no I have a problem: it keeps searching for the network and then says no network..it was open to clean from inside..how can I fix the problem

    Tap Settings > General > Reset > Reset Network Settings
    If that doesn't help, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open?

    My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open? Thank you!

    Thanks R_Kelly:
    Adobe Photoshop Elements Version: 12.0 (12.1 (20140303.12.1.49334)) x32
    Operating System: Windows Vista 32-bit
    Version: 6.0 Service Pack 2
    System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
    Physical processor count: 4
    Processor speed: 2400 MHz
    Built-in memory: 3069 MB
    Free memory: 1631 MB
    Memory available to Photoshop Elements: 1598 MB
    Memory used by Photoshop Elements: 69 %
    Image tile size: 128K
    Image cache levels: 8
    Video Card: ATI Radeon HD 4800 Series
    Video Mode: 1680 x 1050 x 4294967296 colors
    Video Card Caption: ATI Radeon HD 4800 Series
    Video Card Memory: 512 MB
    Application folder: C:\Program Files\Adobe\Photoshop Elements 12\
    Photoshop Elements scratch has async I/O enabled
    Required Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
    The first thing I did was UPDATE. I have all the latest updates available (according to the updater). The Camera Raw Plug-in says it is version 8.0.
    The RAW files are from a Canon T3i. It's a very common camera, I can't believe it wouldn't be supported.

  • TS3276 I just downloaded the OS X Lion mountain and Mail won't open.  I get an error message everytime I try to open the app.How can I fix that?

    I just downloaded the OS X Lion mountain and Mail won't open.  I get an error message everytime I try to open the app.How can I fix that?

    I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader.
    But have you run the the iPhoto Library upgrader? It is installed in Applications > Utilities. Launch it and direct it to your iPhoto library.
    Which version of iPhoto did you upgrade from?
    The upgrader is only necessary, if you have been  running iPhoto7.1.2 or earlier.

  • My mac is freezing all the time, how can I fix this?

    My mac is freezing all the time, how can I fix this?

    Run Disk Utility to verify/repair your drive(s).  Boot from your installer dvd to repair the boot drive.  If the repair reports that it fixed anything then see if your problem is fixed.

  • HT2729 My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

    My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

    What video content works with iTunes and mobile devices?
    iTunes:
    Video content purchased from the iTunes Store.
    QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
    Video podcasts.
    iTunes Digital Copies.
    iTunes Store Movie Rentals (Requires iTunes 9 or later).
    Mobile Devices:
    Video content purchased from the iTunes Store.
    Videos that have been shared to iTunes using QuickTime Player (Mac OS X v10.6 Snow Leopard).
    Videos that have been re-encoded for iPod with QuickTime 7 Pro.
    Videos that have been re-encoded for iPod with iMovie, Final Cut Pro, and others. Refer to Exporting a movie from iMovie HD to iPod for an iMovie HD tutorial.
    Video Podcasts that have been created for mobile devices.
    Video files after using the iTunes File > Create New Version > Create iPod or iPhone version option.
    Video files after using the iTunes File > Create New Version > Create iPad or AppleTV version option (iPad and AppleTV only).
    See below for detailed movie specifications.
    iTunes  Store Movie Rentals (Requires iTunes 9 or later).
    Does the video need to be encoded in a special way?
    All mobile devices which iTunes can sync video to can play the following video formats:
    H.264
    File formats: .m4v, .mp4, and .mov
    Video: Up to 768 kbits/sec, 320 x 240, 30 frames per second (fps), Baseline Profile up to Level 1.3.
    Audio: AAC-LC up to 160 kbits/sec, 48 Khz, and stereo audio.
    MPEG-4
    File formats: .m4v, .mp4, and .mov
    Video: Up to 2.5 Mbits/sec, 480 x 480, 30 fps, Simple Profile.
    Audio: AAC-LC up to 160 kbits/sec, 48 Khz, stereo audio.
    Other formats may be supported by newer devices. The technical specifications can give additional details.

  • I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    How are you trying to transfer it and what are your setting on iTunes.  I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue.  If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can.  Also make sure you are dragging to music on the iPhone.
    Hope this helps

  • I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

    I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

    - Try cleaning out/blowing out the headphone jack. Make sure that y do not leave any foreign material or leave anything in the jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I accidentally linked my wife's phone number with mine. Now I am getting MY text messages that I send to her. It even says my texts are from her. How can I fix it?

    I accidentally linked my wife's phone number with mine. Now I am getting MY text messages that I send to her. It even says my texts are from her. How can I fix it?

    You can't "link" phone numbers but you can, and did add her email address to your iMessage send/receive list.  This often happens when you both use the same Apple ID
    Settings > Messages  > Send & Receive > you can be reached by iMessage at >
    Settings > Messages > Send and Receive > start mew conversations from ?
    You are receiving your own messages because the same email address is on both lists

  • Photomerge panorama produces an empty merge file from two images; how can I fix this? Thanks

    Photomerge panorama produces an empty merge file from two images; how can I fix this? Thanks

    If you did not create this swf yourself then you won't be able to do what I am suggesting.  If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output.  That will create an html page that embeds the Flash file.  Test that file in your browser and see if it plays properly.  IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
    Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

  • HT204152 I am unable to update my App  store Updations. the reason being billing problem asking to update payment method.many times i updated my credit card details but refusing from the system .how can i update my app store updations like  Face book etc.

    I am unable to update my App  store Updations. the reason being billing problem asking to update payment method.Many a  times i updated my credit card details but refusing from the system .how can i update my app store updations like  Face book etc....Using ! phone 6plus  .IOS8.3

    What do you mean by 'refusing from the system', if you are getting an error message then what does it say ?
    For a credit card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is and if you are getting a 'declined' message then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If when trying to download you are getting a message about a 'problem with a previous purchase' then that implies that iTunes wasn't able to collect the money for your last purchase. If that is the case then you won't be able to download anything else (including app updates) until you've paid off what you owe : Pay an unpaid balance in the iTunes Store - Apple Support
    If you aren't getting the 'problem with a previous purchase' message then try logging into your account (not when trying to download something) and see if you get the 'none' option so that you can remove the card's details and be able to download updates to your apps : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

  • My ipod touch 3rd gen wont turn on or charge and laptop couldnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? help please

    my ipod touch 3rd gen wont turn on or charge,laptop doesnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? it happened after i plugged it in a socket then shows not supported with this accessory....help please.........thanks

    Try:
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • Incomplete items in catalog. Only complete items were transferred

    Hi Gurus, Need your expert advise on below scenario: We are on SRM5.0 using classic scenario. We have created material in SAP. Materials created will supposedly be reflected in SRM and can be viewed in table COMM_PRODUCT, but there is no entry of thi

  • Operations on boolean

    Hello, how can have the following with AppleScript : 0110 OR 1001 = 1111 ? Regards, Didier.

  • Prob.. in login page

    hi..all of u.... i have made a login page in html page...in which two text field there..named username and password... i want to do the stuff that if the user enter correct username and password..then it displays a pop up window mentioning that u hav

  • Connot connect to 3.4 client since ARD 3.7 update

    Since ARD 3.7 update, I cannot connect to 3.4 client. The 3.4 client is a MacOS X 10.5.8. I can see the client in the list but the status is «no username or password». And I cannot connect. I have not seen any ARD client update for MacOS X 10.5.8.

  • Snapshot Flakiness

    Hi, I have a Sun StorageTek 6140 array. Firmware version is 06.19.25.16. I am using CAM 6.0.1.11 on RHEL 5. What I mean when I say "flakiness" is sometimes taking snapshots and mapping the snapshots from the CLI works great, other times it doesn't. S