From Transactional ODS to Cube

How can I load data from a transactional ODS to an InfoCube?(BW 3.1)
P.S.
I have tried the solution proposed here on SDN when the 8<OSD_NAME> infosource is to be used, but there is no infosource with the such name in my infosource tree(however the data source exists). May be, it is the issue of my BW version (3.1). Has someone implemented that scenario:
Hello,
You don't need to export Datasource, It's System Generated.
You can also try this.
In order to transfer data from a transactional ODS object into further data targets, first create update rules from ODS object to the datatarget you want to update. During the update rule creation, select the transactional ODS object as the infosource. For the transactional ODS objects "Update Data in Data Targets" option is not available in the context menu of the ODS object, so you have to manually create infopackage to transfer data.
Go to the infosources tab in the administrator workbench and create infopackage for the system generated export datasource (technical name is 8<technical name of the ODS>). Then you can just execute the infopackage to load data into subsequent data targets, but please keep in mind only full upload is possible (no delta upload) with transactional ODS objects.
Hope it helps.
San.
migrating data from transactional ODS to InfoCube
Message was edited by: Mikalai Makaranka

goto settings menu in rsa1 transaction and click on 'Display Generated Objects'..
switch radio button to 'Show generated ODS objects'.
then search for the generated export datasource(8<ods technical name>).
cheers,
Vishvesh

Similar Messages

How to load data from a ODS to CUBE Request ID - by - Request ID?

How to load data from a ODS to CUBE Request ID - by - Request ID?
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "data mart status of request" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

How to store as single record data coming from different ods to cube

Hi All,
we have the scenario like .
Same contract values are uploaded from 3 ods to cube.In the cube this information is stored as 3 different records.
Is there any option having same contract no and same fiscal period values should be stored as single record in cube.
Thanks in advance.
Regards,
Shradda.

Hi Shradda,
On Performance Side .....consider below points
1. Indexes on Cube ( That delete indexes before load and create them after Load ).
2. Aggregate Design ( Decision on Base Aggregates, roll up Hierarchy , BW Statistics etc ).
3. Partition of InfoCube ( Basically decision on No. of Partition )
4. Data Package Size ( Always try to have larger Data Package so that preaggreation will reduce the no. of Data Records ).
Best is Service.sap.com on BI page u will find material for performance . THat will help you .
To assign points on the left of screen u will get radio buttons for assigning points for each person who has responded .
Regards,
Vijay

Load from Staging ODS to Cube

We have a staging ODS which has been loading to a cube via a delta mechanism. By mistake someone has carried out a full load. We have deleted the full request. Is the delta mechanism corrupt and how can we collect the requests which were supposed to be updated (there is no selection options in the package)? Thanks

I faced a similar issue recently. I would
1) Delete the full load request from cube
2) Uncheck the 'data mart status' of that request in the ODS
3) Delete that request in ODS
4) Create a new infopackage on the ODS InfoSource (8ODSXXXX) with 'init without data' option
- before scheduling the infopackage, delete the initialization in the scheduler by going to (Scheduler/Initialization Options for Source System)
5) Execute the package
Now every time a new load comes into the ODS you will be all set.
Hope this helps,
Justin

How to upload the data from existing ods to new cube?

Hi all,
There is an existing ods and reports are been created for that ods. My task is to create a cube and pull out the data from the ods to cube.
I have created a cube with update rule. And i want to know to how to load all the data from the existing ods to the newly created cube.
thanxs
haritha

Hi haritha,
If you've already created the update-rules, try to create cube, than make a mapping between ODS & Cube.
If done,
1. Right-Click on ODS, find the menu update data to data target.
2. Choose for Init.
If you wanna make it update data to cube automatically, then you must setup the setting in ODS.
1. double-click on it.
2. In setting, you'll see the option for "automatically update data to data target".
3. Choose for it.
Hopefully it can help you a lot.
Regards,
Niel.
thanks for any points you choose to assign.

Report on standard ODS object and transactional ODS object

hi gurus
i have an infoset which is built on two transactional ODS objects and one standard ODS object which gets the data on regulr schedule. the transactional ODS obejcts get the user entered data.
when i query on the infoset, i am getting the data. and when i query on the standard ODS object i am getting the data. but when i am trying to create a query on the combination of the Infoset and the ODS object i am not getting the data.
is there any way to generate report on the standard ods object and Infoset from transactional ods objects.
your help will be greatly appreciated.
thanks in advance
vijaykumar

Hello ViJaY,
how r u ?
Try creating a MultiProvider with the Standard ODS and InfoSet.
Best Regards....
Sankar Kumar

ODS to cube load

Hi Gurus,
Im getting the following message on the status bar while I load the data from the ODS to cube "No corresponding requests were found for request REQU_482YYA0AQ1PAHB4N1TA35H3UJ in the ODS/Cube"
Please let me know the problem behind it.
Thanks,
ND

refer thread:
No corresponding request s were found for request reqxxx in the ODS or cube

Data from transaction cubes to text file in bw directories

hi all
i have 2 transactional planning cubes in BW. the data in these cubes in bw needs to be uploaded monthly in to a single text file so that APO system can access the data for some purpose.
my question is how to upload the data from transactional cubes to the text file, which is more detailed. is that use ful to construct a ODS or CUBE(basic) on top of the transactional cubes.
if i keep the file in BW directory whethere APO can access that.?..
please help me out
praveen.

You can load data directly from the BW cubes to APO if the BW system is set up as a source system.
If you need the file then you may want to investigate using open hub.

Data from transactional cube to a text file in directories

hi all
i have 2 transactional planning cubes in BW. the data in these cubes in bw needs to be uploaded monthly in to a single text file so that APO system can access the data for some purpose.
my question is how to upload the data from transactional cubes to the text file, which is more detailed. is that use ful to construct a ODS or CUBE(basic) on top of the transactional cubes.
if i keep the file in BW directory whethere APO can access that.?..
please help me out
praveen.

Hello PraVeeN,
How r u ?
Is this not possible with InfoSpokes ???
Best Regards....
Sankar Kumar
+91 98403 47141

Unable to load data from an ODS to a Cube

Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: "No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.

Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help!

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

Help needed with loading data from ODS to cube

Hi
I am loading data from an ODS to a cube in QA. The update rules are active and definition seems right. I am getting the following error, in the update rules.
"Error in the unit conversion. Error 110 occurred"
Help.
Thanks.

Hi Chintai,
You can see the record number where the error occured in the monitor (RSMO) for this data load > goto the details tab and open up the Processing area (+ sign). Try it out...
Also about ignoring the error record and uploading the rest, this is done if you have set Error Handling in your InfoPackage (Update tab), but this would have to be done before the load starts, not after the error happens.
Hope this helps...
And since you thanked me twice, also please see here:-) https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/7201c12f-0701-0010-f2a6-de5f8ea81a9e [original link is broken]

Error in updating data from ODS to CUBE.

Hi,
I am tryin to load data manually from ODS to CUBE in NW2004s.
This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
In the CUBE, I am trying to populate fields by using the ODS fields.
For eg.
In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
For this, I have done the coding in the Transfer Structure in the Rule Group.
The time field is gettin populated , but the date field is not getting populated.
I get an error as Eg:
Value '04052007' for CHAR 0DATE is not plausible
Due to this, the corresponding records is not getting displayed
Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
Please help me with a solution for this.
REMOVED
Thanks In Advance.
Hitesh Shetty

Hello Hitesh
SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
Thanks
Tripple k

Error while loading data from write optimized ODS to cube

Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.

please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi.

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

From Transactional ODS to Cube

Similar Messages

Maybe you are looking for