From Version 4.0.1 to be opened in 2011

Source Version: 4.0.1
To be opened in: 2011
Thank you for the assistance!
Attachments:
Source_Control.llb ‏1770 KB

I did a mass compile in 8.2.1, which you can read with 2011. Also attached is the mass compile report. It details some obscure things that happened or VIs that are broken. It couldn't find a Motors.llb\global positions.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Source_Control.llb ‏848 KB
Mass Compile Results.txt ‏3 KB

Similar Messages

Upgraded to firefox version 5 for Mac OSX 10, from version 3.6.18, now cannot open.pdf files from links . Only get blank page.

Worked okay with previous version of Firefox 3.6.18

The following worked for me:
http://support.mozilla.com/en-US/questions/684867
"Problem: I had the same problem but with mac osx 10.5.8, Firefox 3.6.6 sometimes prints and sometimes does not, but the preview was always blank and I could not save to pdf file.
Solution: I downloaded Firefox 3.5.10, installed it on my desktop and opened it, tried print preview and it worked, quit Firefox 3.5.10 and ran 3.6.6 and voila! print preview is working fine and I can save to pdf fine.
I guess running 3.5.10 fixes the profile in a certain way. I have no idea how that happened but it worked."

I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer

When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of CC and now it isn't editing photos! HELP please required.

When I go to edit a picture from Lightroom to Photoshop it does not open in Photoshop, it use to work before the latest update, but I deleted the last version of Photoshop CC and now it isn't editing photos!
Lightroom opens up Photoshop but the image doesn't appear! Any help gratefully needed!

Ok I sorted it, by uninstalling and re-installing Photoshop

Opening Project First Time from Version Control. RoboSource Node

Four writers have upgraded successfully. My fifth is having issues...
She has Serena Dimensions SCC installed as well (another source control product - used by Applications, not the authors or Infra.
Problem: When she is establishing the root path (and the Browse RoboSource Node window opens, but it does not populate, even after 20 minutes. Reboot did not work, neither did manually removing Serena Dimensions SCC. I have verified that she has a connection to the database (via RSC Explorer) and can see the project (as well as the RH7 version of the project). We have
These are the instructions... (screenshots not included). She's hanging up on
1.1    Using a New Project for the First Time
IMPORTANT NOTE:
The author must have local administrator rights on the machine. If the user has a privileged account, they must set up full local control of their work folder (specified in 1.1.2.8).
1.1.1    Install RoboHelp and RoboSource Control
1.    Download appropriate software packages, including all patches, from Adobe.
2.    Launch RoboHelp Installer. Select the following options for installation:
o   RoboHelp for HTML
o   RoboSource Control (Client)
o   CS4 Script Extender
INSTALLATION NOTES
Installation of each component is separate and may take up to 30 minutes. You do not have to install RoboHelp for Word.
Only select the Client Install for RoboSource Control.
3.    Install all patches in the order specified by the vendor. Check with the technical communicator on which version is currently in use for patching.
1.1.2    Open the Project
1.    Launch RoboSource Control.
2.    Establish a database connection per section 3.3.1.
3.    Close RoboSource Control.
4.    Launch RoboHelp 8 for HTML.
5.    Click Open under Recent Projects under the main frame (do not use title bars).
6.    Click the Open Project from version control button (shown below).
7.    Make sure that RoboSource Control 3.1 is highlighted as the Version Control Provider and the checkbox for “Make this my default selection” is checked. Click OK.
8.    Configure the Source Control system as follows:
Connection: PROD
Root Path: Click the … button and navigate to the (project name) root in the database and click OK. This may take several minutes.
Connection Mode: Online
Get to Local Path: Click the … button and navigate to your Data folder. Select Make New Folder under Data and give the folder a unique name to help you identify the files as for the Support KB in RoboHelp.
9.    Click OK when you have configured source control. A copy of the database is now being downloaded to the path you specified. This may take up to 20 minutes.
You can verify that installation is proceeding either by watching your local path fill with files or keeping an eye on the CPU usage of the RSO3MiddleTierService and RoboHelpHTML files under Task Manager.
10. Once transfer is complete, highlight Tier1KB.xpj and click Open. It may take several minutes to open the project the first time. It is typical for the snippet file to check out the first time you open the project and the first time each day that you save all project files.
11. Once the project is open, set Version Control properties:
a.         Select Tools > Options.
b.         On the Version Control tab, select all options. This will prompt the user on each version control action they take.
12. Test a check out/check in to validate correct installation and source control operation.

It's the settings in miscproperties in the XPJ and it works in TFS just fine. I'ts as follows:
<miscproperties>
<matchedpair>
<name>vc::provider</name>
<value>Team Foundation Server MSSCCI Provider</value>
</matchedpair>
<matchedpair>
<name>vc::agent</name>
<value>MSSCC</value>
</matchedpair>
<matchedpair>
<name>vc::database</name>
<value>http://ap-gda113-tfs-a:8080/tfs/centric|NB-WWEELDEN|ITS\Wweelden</value> <- Add the TFS URL, your workspace name and your domain name.
</matchedpair>
<matchedpair>
<name>vc::cookie</name>
<value>$/BV - MVV/Main/Tools/Documentatie/mvv-beheerders</value> <- The location of the project in TFS.
</matchedpair>
</miscproperties>

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

Will I be able to open a library from version 1.5.6 with Aperture 3.1.2?

I have two computers, one running Aperture version 1.5.6 and another running Aperture 3.1.2. Question is will I be able to open my library from version 1.5.6 with version 3.1.2. The computer that is running the early version is dying on me.
Thanks.

When you access the old library with 3 it will upgrade the library before opening it. Make sure you have a backup of the library before accessing it with 3 just in case.
Also be aware once the library is updated it will no longer be accessible from Aperture 1.5.6 and there is no way to reverse the upgrade.

Transferred iTunes library from pc to new mac, iTunes ; however, when opening iTunes on mac it reports the library was created with a newer version of iTunes and won't open.

Transferred Itunes library from pc to new mac; however, when opening itunes on the new mac it reported that the library was created with a newer version of itunes and could not be opened. It asked if I wanted to download updates and I did. However, the new mac is up to date. Itunes won't open. What to do now? Any help would be appreciated.
Thanks
Jim

Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H.

Just upgraded from version 3 to version 5 but cant open do i need to uninstall 3 first

just upgraded from version 3 to version 5 but cant open do i need to uninstall version 3 before i can open ?

You need at least OSX 10.7.0 64bit.
Macintosh
 Processor: Multicore Intel® processor with 64-bit support
 OS: MAC OS X 10.7 (Lion) or later
 RAM: 2 GB (4 GB Recommended)
 Hard Disk: 2 GB of available hard-disk space
 Display: 1024 x 768 Monitor Resolution
 Internet connection required for Internet-based services

My 2014 version of InDesign disappeared from my dock. when I try to open it i get an error message

my 2014 version of InDesign disappeared from my dock. when I try to open it i get an error message

Hi [email protected],
Please specify the error message that you are getting.
Regards,
Sheena

Opening a project from version control

RH11 | WebHelp
This may be related to my previous post (File Status "New version available") but I am now unable to open a project from version control using the padlock button in RoboHelp's Open Project dialog box. It lets me select a project to open, but then just sits there, not doing anything.
Any ideas?
Thanks
Jonathan

This sounds like a bug to me. Does the RH11 work on a Windows 7 machine? If you have a VMWare lying around, you may want to give that a shot. Short of contacting Adobe with a bug report, I'm out of idea's.
Kind regards,
Willam

I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for comparability and the Welcome page opening every time I start the browser.

Windows 7 64 bit
I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for compatability and the Welcome page opening every time I start the browser. I continue to have to revert to version 9 to resolve this issue.

Sorry to be a while getting back! Tried all of that with no sucess so this AM, bit the bullet and deleted the FF folder from programs and downloaded and installed FF 10.01. Still was plagued with the same problem. Went into the appdata folder and there were two sessionstore.js files. Deleted them both, restarted the browser and no compatibility check for add-ons was done at start up and the extra tab for Welcome to FF was no longer opening Everything seems to be working as it should and I did not loose any of my settings.. Thank you for trying to help and I hope my solution helps anyone else who might experience this in the future. Here's hoping the next update goes smoother!

I have installed a trail version of FrameMaker 12 and cannot open the book and chapter files in FrameMaker 8

Hi
My colleague and I use FrameMaker 8 but I'm considering whether it would be a good idea to upgrade to FrameMaker 12. So today I installed a trail version of FrameMaker 12.
Before opening a book file in FM12, I copied it to another folder so I wouldn't mess up anything. Unfortunately, I forgot to copy the chapter files so I opened most of them from FM12. As soon as I found out about it, I copied them to the new folder, but too late.
Now I'm not able to open the original files from FM8 (and even worse, neither can my colleague). I read somewhere else, that I should save the book file in the .MIF format (I tried both 12 and 7.0) and then open it from FM8. I tried that, but I still cannot open the chapter files.
I get an error message saying: "Althoug xxx.fm appears to be a FrameMaker document, it can't be opened with this release of the product".
I didn't make any changes to the chapter files when I looked at them in FM 12.
What should I do? I case we decide not to upgrade, we will not be able to access this book which is a big problem. I already have some small changes that have to be made.
Thanks in advance for your help!

Back saving to MIF should work, but it’s probably faster to just retrieve a backup of the FM8 files & books and restore them over your botched FM12 versions. Then take a copy of that backup and put it on the trial machine to play away without impacting anything else.

From Version 4.0.1 to be opened in 2011

Similar Messages

Maybe you are looking for