From When Adobe CS3, CS4, Cs5, CS5.5 and CS6 will loose activation support like cs and cs2

Nobody can tell you that. CS2 activation was turned off because of bugs in the software that made it too difficult to maintain. so far no such thing has been the case with the otehr versions. Either way, if and when that time comes surely Adobe will let you know and provide a solution...
Mylenium

Similar Messages

If I upgrade from CS5.5 to CS6 will I have to pay again for upgrading to CSCC?

If I upgrade from CS5.5 to CS6 will I have to pay again for upgrading to CSCC?
I have CS5.5 and my current clients have CS6.
If I upgrade to CSCC will I have any trouble saving back my files to CS6? Are there any know issues that occur when saving back to CS6 or earlier?

Why would you update to CS6 when you can go directly to CC. And while you wouldn't pay another upgrade amount you would have to pay the monthly subscription whether you upgrade to CS6 or not.
And you shouldn't have problems saving your files in a form that is readable by CS6. You wouldn't be able to make further adjustments on items that are not in CS6 ie. Shake reduction, however the adjustments you make in CC will be visible.

How do I create an app from my Adobe pdf forms to use on any mobile device as well as windows and ios?

How do I create an app from my Adobe pdf forms to use on any mobile device as well as windows and ios? I have all the apps in Creative Cloud by the way.

If you already purchased it with the same Apple ID, then you will not be re-charged.

I want to sync my movies from iTunes onto my iPad, but when i try, it says it needs to "erase and sync" my iPad. If i erase and sync, will it delete my apps, photoa, and videos?

i want to sync my movies from iTunes onto my iPad, but when i try, it says it needs to "erase and sync" my iPad. This is the first time plugging my ipad into my newwer computer. If i erase and sync, will it delete my apps, photos, and videos?

All devices only sync what you select to sync.
If you do not want all of the music, then simply do not select all of the music to sync.

When transferring songs from iTunes to phone it was doing it ok then all of a sudden it started to say iTunes cannot pick up information from phone restore to factory settings I am afraid if I do this I will loose all phone numbers pictures and songs anyo

When transferring music from iTunes to iPhone after about 3 downloads a message come up saying iTunes cannot get information from phone and I should restore phone to factory settings I do not wont to do this because I am worried I will loose all phone contacts ,pictures,and songs anyone know how I can resolve this

Not a good idea to depend on an iPhone or any cell phone alone for such important data, which can be lost or stolen or damaged beyond repair.
Contacts are designed to be synced with a supported address book app on your computer and/or there are a number of free email accounts that support syncing contacts and other data over the air such as with an Apple iCloud account, Gmail, Yahoo, and Hotmail.
Photos/videos in the iPhone's Camera Roll can and should be imported by your computer as with any other digital camera.
In addition, contacts and photos/videos in the iPhone's Camera Roll are included with the iPhone's backup.

I need to reformat my computer and I will loose my itunes, How do I go about getting all my apps free and paid back when I reinstall everything (Please someone help)

I need to reformat my computer and I will loose my itunes, How do I go about getting all my apps free and paid back when I reinstall everything (Please someone help)

Have you failed to backup your computer?
If so, then you will have to redownload.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Its out of battery and when i plug it in to charge it will charge until it turns on, and then just stops charging?

its out of battery and when i plug it in to charge it will charge until it turns on, and then just stops charging?

Try a resetting of your phone just to cover that base - Hold down Home and Sleep buttons for at least 10 seconds and see if the phone powers up.
If the phone was completely dead, powering through wall socket is best approach. I've never been able to charge off of a PC if it was completely dead.
If all fails, bring the phone in for service since it is still covered by warranty.

How do i switch my itunes from my old computer to my new computer with out losing my info like playlists and apps?

how do i switch my itunes from my old computer to my new computer with out losing my info like playlists and apps?

I'd suggest following this apple doc to a T: ^.^
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
it will backup your Libary file, which contains all of your playlists and what not. Good luck ^.^

Yes when I plug the mac in it comes up a green tube like thing and wont do anything

I need some help my daughter has a mac laptop we have had it since 2007 and the other day she got alittle bit of water on it not on the keyboard anyway it started acting not right so we dried it and left battery out now we plug it in and it so a green colander like thing and thats it any suggestions? thanks

What is occuring is the "fsck" check on the boot drive is performing a repair at boot time and failing to fix the issue with the file structure of the drive.
If your not experineced in "computer things" I suggest you call a local Mac/PC repair shop and mention you need data recovery and repair. Apple doesn't do data or software repair, only hardware then under warranty and AppleCare or else it's out of pocket.
If you are somewhat capable, you can do data recovery yourself and then attempt to fix your issue in place, but eventually may have to erase and install everything, the operating system, programs and recovered files, as a last resort measure or even have the hard drive replaced or the machine's hardware fixed.
Create a data recovery/undelete external boot drive
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

HT4972 I want to upgrade my iOS 4 to 5 on my Ipod Touch but I no longer have the original computer I used to sync with so it keeps saying I will loose all of my apps and stuff on my new computer

I want to upgrade my iOS 4 to 5 on my Ipod Touch but I no longer have the original computer I used to sync with so it keeps saying I will loose all of my apps and stuff on my new computer..... SO how do I tell it that my new computer is now my regular computer so that I can upgrade my iOS on it without it wiping all of my music, films and apps on it??? HELP please I am desperate to know what to do.

http://support.apple.com/kb/HT1848 - just media purchased from iTunes Store
Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Commercial software utilities for transferring songs from i-device to Mac:
Senuti - http://www.fadingred.com/senuti/
Phoneview - http://www.ecamm.com/mac/phoneview/
MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows

I have a new laptop and have installed itunes onto it, but i am worried if i plug my iphone into it i will loose all my contacts apps and photos!! please help!!!

hi there
i have just bought a new laptop and have installed itunes onto it but i am worried that if i plug my iphone into it, that i will loose all my apps, contacts and photos!!
please help!!

I will try and be helpful unlike the the first two posters!!
When you say installed iTunes I am guessing that its just the program and not your old library? in which case when you connect your iphone you will get a message warning you that you will be replacing the data on the iphone with the library on the new laptop i.e. an empty itunes.
If this is the case what you need to do is on your old laptop,
1: open itunes and go into preference/settings and go to advanced and make sure that consolidate and keep organised are checked.
2: Then go to file and click consolidate library.
3: close itunes and then go to start and open "My Music" folder.
4: Drag the iTunes folder out of My music and put it on an external drive or network the 2 laptops.
5: on the new laptop open "My Music" folder and drag out to the desk top the itunes folder
6: from the external drive or network drang and drop the old iTunes library into the "My Music" folder on the new laptop.
now close it and restart iTunes and your old library should be visable and when you connect your iphone it will identify its the correct library to sync with.

What's the different between cc and cs6? I'm taking a course and cs6 is recommended, but I already have cc, will that be good enough?

What's the different between cc and cs6? I'm taking a course and cs6 is recommended, but I already have cc, will that be good enough?

When I'm away from the desk, I never get the exact wording
"Find new Apps > Filters and versions > select Previous Version"
Then where you see the Install button next to Photoshop below that, click on that and you can select 13.0 CS6 for install.
It's a good idea. CC 2014 has eliminated and added many features, and you want to be on the same page in that course.

My Mac will not start up like normal and I don't knwo why

My iMac will not start up like normal and I don't know why. I tried to run Skype then nothing happend so I tried to restart my computer, but then it never loaded

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

Try the basics from the manual.
restart.
reset.
restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

From When Adobe CS3, CS4, Cs5, CS5.5 and CS6 will loose activation support like cs and cs2

Similar Messages

Maybe you are looking for