From where this runtime is getting populated

Suppose you create a report and run it. After running the report, you click administration, then session, you will find the generated physical query.
+++User_ID:20cc0000:20cc0001:----2011/06/22 21:08:43
i would like to know where this timestamp (2011/06/22) is getting populated.
Could anyone throw some light on this?

Hi,
What do you mean by "where is getting populated"?. AS you mention is getting populated right there, under the Manage Session screen. It takes the server date and time.

Similar Messages

Hi Unable to find where the dat is getting populated in web-dynpro

Hi Everyone,
I am quite new to web-dynpro,I sincere apology if this doesn't make sense.
when I login into portal I see two selection options ,
a) Create a Material
b) View pending approval materials.
Now I am looking at the DC, there are two DC ,
a)Part Add and b) Parts approve .
in Part Add DC i can see a View addpart , here I can the selection of create a material only,
in the next DC i.e. part approve , there is a view which has the second selection screenView Pending approval materials as well the table the shows the output of 2 selection screen -> view approval materials.
Now My question is there is some type of visibility which makes the output table to be viewed on click of secon selection screen.
now when i run this How these two selection screens from two different views are seen.
and Now that when I click on the View Pending approval materials , it shows the list when I have a check box to th e very material list I click and hit on approve tab it approves.
I checked the view it has a table feild called "SELECT" it is a checkbox, but when the application is run i am unable to view this check box.
Now I checked with the selection button and checked it does visibilty on and off for many buttons and tables,apart from visibilty action it doesn't do anything.
I searched the whole coding the datacustom controller and everything i couldn't figure out from where this list got populated.
Please help in on these two issues.
Thanks in advance.
Regards,
Raj

hi,
Create a short cut as follows
1) On the vf02, standard tool bar there is an 'shortcut generate' icon will be there, click on it. you will get the screen where under 'Application', give the following details
Type: system command
command: /h
and click ok then there is a short cut created at your desktop
2) drag and drop the shortcut before clicking on print preview then debugging will starts
then you can able to debug the smartform

APEX JS libraries - From where does these are getting loaded

Hi All,
In every page I can see APEX is loading following JS libraries.
<script src="/i/javascript/apex_ns_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_get_3_1.js" type="text/javascript"></script>
<script src="/i/javascript/apex_builder.js" type="text/javascript"></script>I was thinking these must be specified in the page template, but it's not the case! Could you tell from where does these are getting loaded?
Thanks,
Hari

They are included by the #HEAD# substitution string in the page template.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#sthref1670
This substitution includes the standard APEX CSS and JS references and the contents of the page HTML Header property. From APEX 3.1, the standard CSS/JS can be suppressed using the Include Standard CSS and JavaScript HTML Header property.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/bldr_pgs.htm#sthref613

From where this table has came

From where this table has been created.
I created a table and then i dropped it. When i selected * from tab i got this table.
No operation is being done on this table.
How can i delete this table. I am using 10.2.
SQL> select * from tab;
TNAME TABTYPE CLUSTERID
REGIONS TABLE
COUNTRIES TABLE
LOCATIONS TABLE
DEPARTMENTS TABLE
JOBS TABLE
EMPLOYEES TABLE
JOB_HISTORY TABLE
EMP_DETAILS_VIEW VIEW
CREDIT_CARD TABLE
DUMMY_EMPLOYEE TABLE
T1 TABLE
TNAME TABTYPE CLUSTERID
T2 TABLE
T3 TABLE
T4 TABLE
T5 TABLE
T6 TABLE
BIN$xWu4GVgER361l8+eGWMkGA==$0 TABLE

SQL> sho recyclebin
ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE DROP TIME
TMP              BIN$KYHXM5/OSyuiwovY1v2uzg==$0 TABLE        2007-06-19:14:49:02
TMP2             BIN$fHdaf7HxRKqky5JWorylYQ==$0 TABLE        2007-06-19:14:49:04
TMP2             BIN$rkz3+DhBQruuItFvdsE4VA==$0 TABLE        2007-06-19:14:44:27
SQL> purge recyclebin;
Recyclebin purged.
SQL>

How this PLAF-ABMNG gets populated?

I'm looking at a few planned orders and all these have the Reduced quantity in the planned order - PLAF-ABMNG filled with values. Not sure how they are getting populated. Appreciate your reply.
Thanks,
Siva

Dear Sivakumar,
This value PLAF - ABMNG will get updated after the confirmation is made in MFBF or
MF42N.
Say for the planned order number 1000050 where the order quantity is 500,and if you have confirmed
say 100 quantity,now in the planned order you will be able to see the reduced quantity as 100 and the
order quantity say 400.
Check and revert back.
Regards
Mangalraj.S

Issue with driver program ZSAPM07DR(From where this Program is called)

Hi All,
We need to find out from where the driver program ZSAPM07DR(this is a customized program of SAPM07DR). It has the
form Z_DLYNOTE .
   So how to know from which place the Driver program is called.
Please help .
Thanks and Regards
Channappa Sajjanar

Hi,
It is me not totally clear what you want with this question.
I think you are asking this because you want to change the calling program in such a way that is using the new ZSAPM07DR instead of SAPM07DR.
For this you do not have to change a program. This can be done by making settings (a kind of customizing).
Your print will be made with a certain outputtype. (ithink 1 of WA01, Wa02,Wa03, wae1, wae2, wae3, wee1, wee2, wee3, wf01, wf02, wlb1, wlb2, wlb3) with apllicationtype ME.
The settings can be made with transaction NACE.
for your program> start transaction NACE
                              click on application ME
                              click on outputtype
                              doubleclick on the right outputtype
then you see a prgram, a starting routine, and sapscript or smartform name.
Here you change your settings to your program and your sapscript or smartform or adobe interactive forms.
and save.
these setting are stored in table TNAPR.
Hope this helps you. success.
Gr., Frank

TS3297 Who took this money from my account from where This money is gone £69.99

Can you tell me who took this money from my iTunes account £69.99

These are user-to-user forums, nobody on here will be able to tell you where it went.
You can check the purchase history on your account via the Store > View My Account (, menu option on your computer's iTunes - though I 'm not sure if that shows in-app purchases and/or auto-renewing subscriptions. If you don't see the charge and/or you don't recognise it then you can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Why am getting this ME083 error in BATCH JOB, where as ONLINE not getting?

Hi Experts,
Am creating Purchse Requisation by using BAPI ---> BAPI_PR_CREATE.
If I run ONLINE, Purchse Requisations are creating in EBAN table, with out any erorr messages, fine.
If the same prog. is scheduled as BATCH JOB in production, the Purchse Requisations are creating, fine, but, there is a ERROR MESSAGE in JOB LOG, saying that " ENTER PLANT " of M essage ID& # is "ME 083 "
So, let me know that,
1 - Why am not getting this error message, If I run it ONLINE?
2 - Even though there r error message in JOB LOG (as I mentione din the above), Why the Purc. requisations are creating?
3 - How to track that, from Where this error is coming in BATCH JOB, How to debug the BATCH JOB, after its scheduling?
4 - How to fix it?

It is not uncommon for informational/warning messages to appear when a BAPI is run in batch.
Such messages do not prevent the completion of a job, but may provide information about the status of processing.
When you run the job online the message may just flash briefly on the bottom of the screen, and you might not even notice it.
I get similar messages when I run other BAPIs, where the message is logged but the process continues to run.
To address the question of the message itself, if you look at the code underlying the BAPI, for example, include L2105I01, which contains the methods, you can see the place where the message is issued.
The message is issued if field PR_TYPE in the header structure is initial.
This is fairly easy to find just by examining the source behind the BAPI and the methods that it uses.
You can navigate to include L2105I01 just by clicking on Method process in BAPI_PR_CREATE, just as you can with any other navigable object in ABAP.
You should see this in BAPI_PR_CREATE around line 108.
CALL METHOD l_ref_bapi->process( ).
Double click on process.
Method renumbering is then called by Method process if the actyp = hin (a constant meaning add/create which is set in BAPI_PR_CREATE), and if ITEM_INTVL (Item number interval) is not initial.
Double click on Method renumbering.
Method renumbering then checks if field PR_TYPE is initial, and if it is, then the message 083 that you are getting will be issued. You will also see that the message is issued as a warning only, which is why the document is still created.
You can drill down through the code by double clicking, as usual with navigation.
I found this initially by clicking method set_header, which brought up the include with the method code. I then searched for 083, which is the message id. I then backtracked to find out what the path to Method renumbering was.
Always do a little digging in the source, the message has to come from somewhere. If the first search does not get a hit, try the next one until you exhaust the possibilities. I chose set_header, since it appeared to be specific to the function of the BAPI, and something like that will usually be the best place to start. In this case, it took me right to it.
Brian

From where do I get agexx_32.dll?

I am missing agexx_32.dll file while I am developing driver files for 8267D Signal Generator.From where do I will get agexx_32.dll ?Kindly provide me the path for the dll.

Where did you get the driver? An Agilent 8267 instrument is not listed on NI's driver site. If this is an IVI driver, look in VXIpnp\WinNT\bin. Otherwise, go to the origianl site and see if it lists other files needed to be downloaded.

How to find when a ztable gets populated?

Hi Folks,
Closing balance not carrying forward to Opening Balance-MM
Previously I posted a question with the above said subject.But couldn't get any right lead.
The problem is we have developed a zreport to get the RG1 summary of finished goods.For that the previous team who worked on this had copied the table
j_2irg1bal to z2irg1bal.I want to know when and how this ztable will get populated.
Can anyone here please go through the BOLD part of this code and let me know.
K.Kiran.
REPORT zxxx MESSAGE-ID z_apd.
*& Includes *
INCLUDE <icon>.
*& Tables *
TABLES : j_1irg1,
j_2irg1bal,
z2irg1bal,
ser03,
objk.
*& Selection Screen *
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS : p_exgrp TYPE j_1irg1-exgrp OBLIGATORY,
p_stdate LIKE sy-datum OBLIGATORY,
p_endate LIKE sy-datum OBLIGATORY.
SELECT-OPTIONS s_chapid FOR j_1irg1-chapid .
SELECTION-SCREEN : END OF BLOCK blk1.
*& Data Declaration *
Internal Tables
DATA : it_display TYPE TABLE OF zj1irg1,
it_final TYPE TABLE OF zj1irg1,
it_alv TYPE TABLE OF zj1irg1,
Work Areas
wa_display TYPE zj1irg1,
wa_alv TYPE zj1irg1,
it_display1 TYPE TABLE OF zj1irg1,
wa_display1 TYPE zj1irg1,
wa_alv1 TYPE zj1irg1.
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zj1irg1.
DATA: END OF it_itab.
DATA : BEGIN OF itab1 OCCURS 0,
matnr LIKE j_1irg1-matnr,
END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0,
cpudt LIKE j_1irg1-cpudt,
END OF itab2.
DATA : BEGIN OF itab3 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: END OF itab3.
DATA : itab4 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE,
itab5 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab6 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA : sernr LIKE objk-sernr.
DATA: END OF itab6.
DATA : BEGIN OF itab61 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: sernr LIKE objk-sernr.
DATA: END OF itab61.
DATA : itab7 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal1 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE.
DATA: qty_menge LIKE j_1irg1-menge,
iss_menge LIKE j_1irg1-menge,
tot_menge LIKE j_1irg1-menge,
op_menge LIKE j_1irg1-menge,
matnr LIKE j_1irg1-matnr,
exgrp LIKE j_1irg1-exgrp ,
cpudt LIKE j_1irg1-cpudt.
*for checcking lines of itab
DATA: n1 TYPE i.
Others
DATA : v_bwart TYPE mseg-bwart,
v_index TYPE i,
v_index1 TYPE i,
count(4) TYPE n VALUE '0',
neg TYPE char1 VALUE '-',
menge TYPE char16,
count_1 TYPE i,
count_2 TYPE i,
count_3 TYPE i,
count12(4) TYPE n VALUE '0',
count13(4) TYPE n VALUE '0'.
*Ranges
RANGES: v_bwart1 FOR mseg-bwart.
For ALV Display
DATA : gs_variant TYPE disvariant,
gs_layout TYPE lvc_s_layo,
c_stk TYPE scrfname VALUE 'ZRG1',
custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA : grid1 TYPE REF TO cl_gui_alv_grid,
event_receiver TYPE REF TO lcl_event_receiver,
ok_code TYPE sy-ucomm,
it_fieldcatalog TYPE lvc_t_fcat,
wafieldcatlog TYPE LINE OF lvc_t_fcat,
lt_rows TYPE lvc_t_row,
wa_rows TYPE LINE OF lvc_t_row.
*& Start of Selection *
START-OF-SELECTION.
IMPORT s_chapid FROM MEMORY ID 'SCHAPID'.
PERFORM get_data.
IF it_display[] IS INITIAL.
No Details Available
MESSAGE i017(z_apd) WITH text-005.
STOP.
ELSE.
Display the Details on the Screen
sort it_display by matnr.
*sort it_display by cpudt RISINDR RISINDI matnr.
<b>LOOP AT it_display INTO wa_display.
ON CHANGE OF wa_display-matnr.
*insert
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
ENDIF.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion.
ENDIF.</b>CLEAR: qty_menge,
iss_menge,
tot_menge,
count,
matnr,
cpudt,
exgrp.
ENDON.
loop at itab6.
AT NEW matnr.
v_index = 1.
count = count + 1 .
ENDAT.
IF v_index = 1.
CLEAR v_index.
*INsert for adding start
IF wa_display-risind = 'R'.
*wa_display-OP_FINISH = wa_display-OP_FINISH +
wa_display-CB_FINISH +
wa_display-MENGE.
wa_display-op_finish = wa_display-menge.
qty_menge = wa_display-op_finish.
IF wa_display-status = space.
tot_menge = tot_menge + qty_menge + wa_display-cb_finish .
ELSE.
tot_menge = tot_menge - qty_menge + wa_display-cb_finish.
ENDIF.
*tot_menge = op_menge.
op_menge = tot_menge.
ELSE.
*Qty Issued
wa_display-op_bond = wa_display-op_finish - wa_display-menge.
IF wa_display-op_bond LT 0.
iss_menge = wa_display-op_bond.
iss_menge = ABS( iss_menge ).
*Start of modification
tot_MENGE = tot_MENGE - iss_MENGE ."
IF count LE 1.
tot_menge = wa_display-cb_finish - iss_menge ."
ELSE.
tot_menge = tot_menge - iss_menge ."
ENDIF.
*End of modification
op_menge = tot_menge.
ENDIF.
ENDIF.
*wa_display-MENGE_FINI = wa_display-OP_FINISH - wa_display-OP_BOND.
*tot_MENGE = tot_MENGE + qty_MENGE - iss_MENGE .
wa_display-menge_fini = tot_menge.
**matnr for insert
matnr = wa_display-matnr.
*excise group
exgrp = wa_display-exgrp.
*Date
cpudt = wa_display-cpudt.
*Opening Balance
*Insert start
*if count le 1.
if wa_display-RISIND = 'R'.
wa_display-CB_FINISH = wa_display-CB_FINISH + qty_MENGE.
else.
wa_display-CB_FINISH = wa_display-CB_FINISH - iss_MENGE.
endif.
*endif.
*Insert End
IF count GT 1.
IF wa_display-risind = 'R'.
wa_display-cb_finish = tot_menge - qty_menge.
ELSE.
wa_display-cb_finish = tot_menge + iss_menge.
ENDIF.
ENDIF.
*check it_display-SERIALNO = wa_display-SERIALNO.
MODIFY it_display FROM wa_display.
*INsert for adding end
*move-corresponding wa_display to it_itab.
*append it_itab.
*check it_itab-SERIALNO = wa_display-SERIALNO.
*if sy-subrc = 0.
*endif.
*Insert to update closng to balance to Rg1bal table
*start
count12 = count12 + 1.
*for last record
AT LAST.
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion
ENDIF.
ENDIF.
ENDAT.
*Insert to update closng to balance to Rg1bal table
*end
MOVE-CORRESPONDING wa_display TO wa_alv.
APPEND wa_alv TO it_alv.
append itab6 to it_alv.
ENDIF.
ENDLOOP.
loop at it_alv into wa_alv.
wa_alv-exgrp = wa_alv-exgrp.
wa_alv-SYEAR = wa_alv-syear.
wa_alv-SERIALNO = wa_alv-SERIALNO.
endloop.
EXPORT it_alv TO MEMORY ID 'ABCD'.
call screen 100.
ENDIF.
*& End of Selection *
END-OF-SELECTION.
*& Class Definition *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm,
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
*& Class Implementation *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Local Variables
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to to show printing
CLEAR ls_toolbar.
MOVE 'PRINT' TO ls_toolbar-function.
MOVE icon_print TO ls_toolbar-icon.
MOVE 'Print Receipts' TO ls_toolbar-quickinfo.
MOVE ' Print' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " Handle_toolbar
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'PRINT'.
REFRESH : lt_rows , it_final.
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = lt_rows.
CALL METHOD cl_gui_cfw=>flush.
LOOP AT lt_rows INTO wa_rows.
READ TABLE it_alv INDEX wa_rows-index INTO wa_alv.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
ENDLOOP.
perform display_form.
ENDCASE.
ENDMETHOD. "handle_user_command
METHOD handle_double_click.
IF e_column = 'MBLNR'.
READ TABLE it_alv INDEX e_row-index INTO wa_alv.
IF sy-subrc = 0.
REFRESH it_final.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
PERFORM call_migo.
ENDIF.
ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data .
*Select only for matnr and chapid from table
SELECT matnr FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab1
WHERE exgrp = p_exgrp
AND
WERKS = P_WERKS
and
MATNR in s_MATNR
and
CPUDT in s_CPUDT.
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY matnr.
SORT itab1 BY matnr. " for performance
DELETE ADJACENT DUPLICATES FROM itab1 COMPARING matnr .
SELECT cpudt FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab2
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY cpudt.
SORT itab2 BY cpudt. " for Performance
DELETE ADJACENT DUPLICATES FROM itab2 COMPARING cpudt .
LOOP AT itab1.
LOOP AT itab2.
*on change of itab1-matnr or itab2-cpudt.
*select * from J_1IRG1
CLEAR itab3.
SELECT * FROM j_1irg1
*into itab3
APPENDING CORRESPONDING FIELDS OF TABLE itab3
WHERE matnr = itab1-matnr
AND
cpudt = itab2-cpudt.
*count = count + 1.
IF sy-subrc EQ 0.
LOOP AT itab3.
*count = count + 1.
*READ TABLE itab3 INDEX count."1.
IF itab3-risind = 'R'.
MOVE-CORRESPONDING itab3 TO itab4.
APPEND itab4.
DELETE itab3.
MOVE-CORRESPONDING itab4 TO itab6.
APPEND itab6.
CLEAR itab4.
ELSE.
MOVE-CORRESPONDING itab3 TO itab5.
APPEND itab5.
DELETE itab3.
MOVE-CORRESPONDING itab5 TO itab6.
APPEND itab6.
CLEAR itab5.
ENDIF.
ENDLOOP.
ENDIF.
*endon.
ENDLOOP.
ENDLOOP.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE itab7
WHERE exgrp = p_exgrp
AND
datum LE p_stdate
ORDER BY datum.
SORT itab7 BY datum.
DELETE ADJACENT DUPLICATES FROM itab7 COMPARING datum .
*insert Start
LOOP AT itab6.
DELETE itab7 WHERE matnr NE itab6-matnr.
ENDLOOP.
*insert End
*insert Start
LOOP AT itab6.
CLEAR itab61. REFRESH itab61.
CLEAR wa_display.
MOVE-CORRESPONDING itab6 TO wa_display.
EQPT Serno
count13 = 1.
SELECT SINGLE obknr FROM ser03 INTO ser03-obknr WHERE
mblnr EQ itab6-mblnr
AND mjahr EQ itab6-mjahr.
IF sy-subrc EQ 0.
SELECT sernr FROM objk INTO CORRESPONDING
FIELDS OF TABLE itab61 WHERE
obknr EQ ser03-obknr.
DESCRIBE TABLE itab61 LINES n1.
*do N1 times.
LOOP AT itab61.
IF count13 EQ 1.
wa_display-sernr = itab61-sernr.
ENDIF.
IF count13 EQ 2.
wa_display-sernr1 = itab61-sernr.
ENDIF.
IF count13 EQ 3.
wa_display-sernr2 = itab61-sernr.
ENDIF.
IF count13 EQ 4.
wa_display-sernr3 = itab61-sernr.
ENDIF.
IF count13 EQ 5.
wa_display-sernr4 = itab61-sernr.
ENDIF.
IF count13 EQ 6.
wa_display-sernr5 = itab61-sernr.
ENDIF.
IF count13 EQ 7.
wa_display-sernr6 = itab61-sernr.
ENDIF.
if count13 eq 8.
objk-SERNR8 = objk-SERNR.
endif.
if count13 eq 9.
objk-SERNR9 = objk-SERNR.
endif.
count13 = count13 + 1.
endselect.
ENDLOOP.
*enddo.
ENDIF.
endif.
*End of Modification Eqpt Serial No
MOVE-CORRESPONDING itab6 TO wa_display.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = itab6-matnr
AND datum LE p_stdate
AND exgrp = itab6-exgrp.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
ON CHANGE OF itab6-matnr .
wa_display-cb_finish = it_bal1-cb_finish.
ENDON.
AT LAST ."matnr.
wa_display-cb_finish = it_bal1-cb_finish.
ENDAT.
APPEND wa_display TO it_display .
CLEAR wa_display-cb_finish.
CLEAR it_bal1. REFRESH it_bal1.
ENDLOOP.
SELECT * FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE it_itab
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate.
DESCRIBE TABLE it_itab[] LINES count_1.
count_3 = count_1 + 1.
DESCRIBE TABLE it_display[] LINES count_2.
IF it_display IS NOT INITIAL.
DELETE it_display FROM count_3 TO count_2.
ENDIF.
*start of insertion
DELETE it_display WHERE status = 'C'.
LOOP AT it_display INTO wa_display.
CLEAR wa_display-cb_finish.
MODIFY it_display FROM wa_display.
ON CHANGE OF wa_display-matnr .
SELECT * FROM z2irg1bal
INTO CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = wa_display-matnr
AND datum LE p_stdate
AND exgrp = wa_display-exgrp.
IF sy-subrc = 0.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
wa_display-cb_finish = it_bal1-cb_finish.
MODIFY it_display FROM wa_display.
ENDIF.
ENDON.
ENDLOOP.
*End of insertion
ENDFORM. " get_data
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZRG1'.
SET TITLEBAR 'ZRG1'.
DATA: lt_exclude TYPE ui_functions.
IF custom_container IS INITIAL.
Create the Custom Container
CREATE OBJECT custom_container
EXPORTING
container_name = c_stk.
Create an instance of alv control
CREATE OBJECT grid1
EXPORTING
i_parent = custom_container.
Layout Settings
gs_layout-sel_mode = 'A'. " Multiple Lines
MOVE 'RG1 Register' TO gs_layout-grid_title.
Prepare the Field Catalog
PERFORM prepare_catalog.
To Exclude the PRINT Button from the Standard toolbar of ALV
PERFORM exclude_tb_functions CHANGING lt_exclude.
Display the List for ALV Display
CALL METHOD grid1->set_table_for_first_display
EXPORTING
it_toolbar_excluding = lt_exclude
is_layout = gs_layout
CHANGING
it_fieldcatalog = it_fieldcatalog[]
it_outtab = it_alv[].
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
SET HANDLER event_receiver->handle_double_click FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form exclude_tb_functions
text
<--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
Local Varaibles
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_print.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " exclude_tb_functions
*& Form prepare_catalog
text
--> p1 text
<-- p2 text
FORM prepare_catalog .
DATA : v_index TYPE i.
*Entry Date
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CPUDT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 Entry Date'.
wafieldcatlog-reptext = 'RG1 Entry Date'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Serial No
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERIALNO'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 serial number'.
wafieldcatlog-reptext = 'RG1 serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CHAPID'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Chapter ID'.
wafieldcatlog-reptext = 'Chapter ID'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MBLNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Number of Material Document'.
wafieldcatlog-reptext = 'Number of Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Item
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ZEILE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Item in Material Document'.
wafieldcatlog-reptext = 'Item in Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'BWART'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Movement Type'.
wafieldcatlog-reptext = 'Movement Type'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Quantity'.
wafieldcatlog-reptext = 'Quantity'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-DO_SUM = 'X'.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*Base Unit of Measure
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MEINS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Base Unit of Measure'.
wafieldcatlog-reptext = 'Base Unit of Measure'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-do_sum = 'X'.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Number
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MATNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Number'.
wafieldcatlog-reptext = 'Material Number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*CB_FINISH
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CB_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Opening Balance'.
wafieldcatlog-reptext = 'Opening Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*materail manufactured
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Manufactured'.
wafieldcatlog-reptext = 'Qty Manufactured'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Issued
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_BOND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Issue'.
wafieldcatlog-reptext = 'Qty Issue'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Total
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE_FINI'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Closing Balance'.
wafieldcatlog-reptext = 'Closing Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Description
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MAKTX'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Description'.
wafieldcatlog-reptext = 'Material Description'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Storage Location
v_index = v_index + 1.
wafieldcatlog-fieldname = 'LGORT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Storage Location'.
wafieldcatlog-reptext = 'Storage Location'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Goods Movement Direction
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Reference Document 1
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RDOC1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Reference Document 1'.
wafieldcatlog-reptext = 'Reference Document 1'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Excise Duty Base Amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBAS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Excise Duty Base Amount'.
wafieldcatlog-reptext = 'Excise Duty Base Amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Basic Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Basic Excise Duty'.
wafieldcatlog-reptext = 'Basic Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Additional Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXAED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Additional Excise Duty'.
wafieldcatlog-reptext = 'Additional Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Special Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXSED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Special Excise Duty'.
wafieldcatlog-reptext = 'Special Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Cess amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CESS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Cess amount'.
wafieldcatlog-reptext = 'Cess amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*ECS Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ECS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'ECS Value'.
wafieldcatlog-reptext = 'ECS Value'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
**Register Entry Status
v_index = v_index + 1.
wafieldcatlog-fieldname = 'STATUS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Register Entry Status'.
wafieldcatlog-reptext = 'Register Entry Status'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*EQPT Serno 1 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 2 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 3 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR2'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 4 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR3'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 5 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR4'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 6 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR5'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 7 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR6'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
ENDFORM. " prepare_catalog
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
IF ok_code = 'EXIT'.
CALL METHOD grid1->free.
CALL METHOD cl_gui_cfw=>flush.
leave program .
LEAVE TO SCREEN 0.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form call_migo
text
--> p1 text
<-- p2 text
FORM call_migo .
CALL FUNCTION 'MIGO_DIALOG' "n547170
EXPORTING "n547170
i_action = 'A04' "n547170
i_refdoc = 'R02' "n547170
i_notree = 'X' "n547170
i_no_auth_check = ' ' "n547170
i_deadend = 'X' "n547170
i_skip_first_screen = 'X' "n547170
i_okcode = 'OK_GO' "n547170
i_mblnr = wa_alv-mblnr "n547170
i_mjahr = wa_alv-mjahr . "n547170
ENDFORM. " call_migo

Thanks,
K.Kiran

How is VBDKR - ZTERM_TX1 gets populated ? Payment terms ...

Hi,
How does VBDKR-ZTERM_TX1 VBDKR-ZTERM_TX2 and VBDKR-ZTERM_TX3 get populated? Currently I see that in the INVOIC IDOC the payment term is populated from VBDKR-ZTERM_TX1 which is not based on payment terms. , I am getting the value 'Payable immediately without deduction'. I was wondering how did this value get populated which is different from the text maintained for paylemt term in table T052 table.
IDOC segment : E1EDK18-ZTERM_TXT
I see that the payment terms in the master table are carried onto Sales order and then to billing document which match the T052 value of the payment term but the IDOC is pulling some other value from some where.
Regards
Praneeth
Edited by: gansprasan on Oct 26, 2011 12:36 PM

Hi All,
All the information provided helped me in determining the logic from where this additional text is extracted.
Actually the new text is a more descriptive text of the same payment terms we see on the SD documents with additional information like percentage, base line date to give more information to the end customer as the info on the payment term in SD document is very brief.
SD_PRINT_TERMS_OF_PAYMENT Function module has the text embedded within the text elements and is pulling this text based on some additional logic inside the FM program.
Regards
Praneeth

Fields Not getting Populated in Queries on Multi Provider

Hi All,
Product class,Product form and Packet size from Zqn6x03 (ods) are not getting populated in Queries(Multiprovider). Our`s is Heterogenous Multi Provider
Points will be awarded.
Thanks in Advance....

Hi xys redd,
After checking all the options it is very much important to run a report "RSR_GEN_DIRECT_ALL_QUERIES" IN SE38.
This is the report used to generate all the changes to reflect in BEx
It will aolve your problem if am not wrong.
Don't forget to assign points.
Venkat

E-Recruitment Job Search Template_Country field comes from where

Helo Experts,
I am facing a problem in Job search Template. We have only one country, where we operate E-Recruitment, so I have created few branches and assigned these Branches only to one company code in configuration.
But in the Job Search template in Application cockpit shows two countries, where i am understanding from where this unknown country is coming inaddition to the configured.
Can you pls help me out, from which table of configuration step the country is picked up and populated in Job Search template.
Thanks evryone in advance and awaiting for you valuable inputs
Thanks
Gita

Hello Gita,
as you found out cluster INDX is used for caching the branch location information. The information is maintained by the class CL_HRRCF_BRANCH e.g. in method UPDATE_CLUSTER. The class and its methods are part of the e-recruiting application for maintaining branches (in standard found on the e-recruiting administrator startpage / portal role).
These internal functions of the e-recruiting applications are the reason why you should not maintain the branches from IMG or directly in TCode BP. Only using the e-recruiting applications ensures that everything is maintained correctly.
To solve your current issue I'd suggest to maintain the branch again using the link of the e-rec administrator. Set the country to a different value, save it and reset it to the value you want. This should update the cluster.
Best Regrads
Roman

Where does "Skype Comunity" get the display name?

I just registered to the support comunity forums and wondering from where this site gets my display name. I have never entered it myself. I have no options to change it. I have no confirmation emails. The other weird thing is that this name is corresponding to one of my email boxes never revealed to skype. What is that all about??? Could someone kindly explain please.

I'm working on the project but the Telecom team is asking for this information. I can only guess on the reasons why he needs this information at this point. I do know he asked for it and deemed it "necessary." Hence the question to the boards. My PoC in Telecom is administering the MDM.

Sap script symbol, how value is getting populated

We have a Delivery Note in which it says Total units = 56. But in debug I saw the symbol &UNIT(Z)& which is getting this value 56 on Devlivery.
I want to know from where this value is coming on layoutset? can any one please tell me....as this is not table field or custom variable that is coming from print program.
Thanks a lot.

Hi,
I think through debugging only you can find the same.
In your script utilites activate debugger and your include set a break point in the open form and after reaching your include
in the debugging screen press f6 and find where your unit value is coming from.
In your script display check defination select here also you will find in which programs your form is triggered.
Your include is using in many program, if you know program then keep a break also in your program especially in write_form
function modules.
Thanks,
Phani.

From where this runtime is getting populated

Similar Messages

Maybe you are looking for