From where to set a mandatory Indicator..
Dear All,
Anyone can tell me from where to set a mandatory indicator to create a debit note with ref. to billing..
Regards,
Hello,
Yes... you need to set the indicator M Ref to billing Document in the debit memo request in field called Reference mandatory. The transaction for the same is VOV8.
Once you set this, whenever you create a debit memo reques, the system will ask for an Invoice as reference.
Prase
Similar Messages
-
Chapter Markers are off from where I set them in FCP HD
I just completed editing a Hip Hop concert with 12 performers. I put chapter markers at the start of each groups performance in FCP HD. When I exported my project I included the chapter markers as well. I used the new iDVD5 to burn the DVD. I DO have DVD Studio Pro but am not effecient with that yet. Anyway, after the long encoding process and burn, I watched the DVD on my set top DVD player.
When I tested out the DVD skipping from one group to the next, it wouldn't go right to the next group! For some reason the markers were coming up 20-30 seconds before the next performance! So you would see the end of the performance you are currently watching before it switched to the next scene or in my case next group.
The Chapter Markers are placed at the very begining of the groups performance so why after I burn the DVD is it putting the markers up to 30 seconds before where I want it?
Should I try to move the markers forward about 20-30 seconds or so? This is annoying because its perfect in FCP HD but its not placing them in the right places in iDVD5. I should be able to skip to each group as if it were a scene in a movie.
Any suggestions?All your problems are related to not having the Record Keyframes button on (A). If you create a keyframe point for your mask position and then advance a few frames in the timeline and start moving those mask positions, a new keyframe is NOT created. Instead the points for the mask shape, INCLUDING the the keyframed position are re-positioned relative to the amount you moved them.
If you are going to manually set keyframes (not at ALL recommended), then you have to set the keyframe BEFORE you make any changes to the mask.
Andy -
From where to set custom ringtone in Iphone4 ?
Hii.....Guys.....I have seen many videos on how to set custome ringtone in Iphone but I failed. I am nt getting any option to set custome ringtone in iphone. I have already coverted it to m4r bt still its nt showing in Iphone. what should I do now ? help me
If you have created a custoom ringtone and are trying to get it onto iPhone
depending on where the .m4r file is drag and drop (on a PC ) to tones on side bar of iTunes and sync -
I can't find Personal Hotspot or Set Up Personal Hotspot in Settings on my 4s, does it have to be downloaded first? From where? I can't find it in the app store.
You must be using a supported carrier that supports the personal Hotspot feature, and you must subscribe to a data plan that permits tethering. Your account must be provisioned properly for an iPhone.
A list of carriers, including which ones support this feature can be found here: http://support.apple.com/kb/ht1937 -
From where can I get the complete set of keyboard replacement keys.
Hey guys
Can anyone tell me from where can I get all the keys for my macbook's keyboard uni body 15" mid 2010.
RegardsGoogle there are many
ebay
see
http://forums.macrumors.com/showthread.php?t=667097
http://www.thebookyard.com/apple_keycaps.php
http://www.replacementlaptopkeys.com/macbook-key.html -
Where to set Mapped Primary Table
I am using sunOne studio 4 update 1, EE.
I have created a schema by doing New->Database->Database Schema, all OK.
I have then created related ejbs by doing New->J2EE->Related CMP Entity EJBs, all OK.
Now I want to view the mapping information so
I look at the CMP bean entry properties under the EJB module but I see no mapping information in Sun ONE AS Mappings tab. !!!
When I try to edit the protected field I get warning indicating that bean must have a valid Mapped primary table. It tells me to set a Mapped Primary Table in the main properties sheet for this bean.
My problem is I can not find this sheet
Please help before I go crazy
Thanks in advance
Tex...OK I know where to set these fields now.
It is set in the Sun ONE AS tab pane.
However, here comes the next problem.
The Wizard generated schema does not recognise the primary key fields so I can not map CMP to any table :-)
I think this is a bug because I have generated schemas from 3 different databases (IBM, MySWL, SAP) and the tables have primary key fields.
When I get a connection in Runtime Pane under Database node, I can see the primary fields are highlighted with red color.
However, when I obtain the schema using, New->Database->Database Schema, there are no key fields generated.
Anyone have any ideas, work around?
Thanks
Tex... -
To Set Goods Receipt Indicator For Particular Line Items In SRM
Hi All,
i am working on BBP_DOC_CHANGE_BADI in SRM. i am trying to set the goods receipt indicator for particular line items based upon certain conditions. The values are being set in the badi. But when the Purchase Order is created in the backend R/3 i coudn't able to find the goods receipt indiactor being set..
i used this field to set the GR indicator
GR_IND = 'X'. " Goods Receipt Indicator
Can anyone help me in this?
helpfull answers will be rewarded....
Thanks,
MuraliTo Murali and Christophe,
I have set the GR and GR non val indicator in CREATE_PO BADI but I face the following situation :
problem -
In case of multiple account assignment in the shopping cart, the R/3 transaction ME21N sets these flags.
The flag status determined as per EBP conditions is lost.
I need to retain the flag status as per EBP conditions even in this multiple account assignment scenario.
proposed solution -
- CREATE PO badi is already implemented in EBP and customised logic for GR and GR non valflag is in place.
- I create user exit in R/3 backend system in ME21N transaction
- I make RFC call in this user exit to EBP and check the table BBP_PDPSET for the shopping cart.
This is how I get the flag status as per EBP conditions and copy the same to R/3 thereby overriding the multiple account assignment check of the R/3 system.
issue -
When I tried to verify that I can check the BBP_PDPSET table from R/3, I found that this table is not having entries for all the records in CRMD_ORDERADM_I table.
For which shopping carts will the BBP_PDPSET table not be populated ?
thank you in advance,
Bhakti. -
Extracting similar data from a dynamic set of tables
I want to select common fields from an arbitrary set of tables, adding an extra field that is the table name, and return all of these rows in a single table. I know the steps but I am getting bogged down in the details (being new to Oracle):
--Create a temporary table.
--Generate a dynamic SQL statement to grab the data for each table of interest.
--Execute that query and store the results in the temporary table.
--Output the entire temporary table and delete it.
Here is my latest attempt:
================
Create global temporary table myTempTable
Title varchar2(30),
IdType number(8),
Count number(8)
) on commit delete rows;
declare
sql_stmt VARCHAR2(200);
tname VARCHAR2(30);
begin
for tname in (
select distinct table_name from sys.ALL_TAB_COLS
where owner='me' and table_name like '%ASSIGNS'
loop
sql_stmt :=
'insert into myTempTable(Title, IdType, Count) ' ||
'select '':1'', IdType, count(*) from me.:1 group by IdType';
EXECUTE IMMEDIATE sql_stmt USING tname;
end loop;
select * from myTempTable;
commit; -- to delete the temp table
end;
================
The error messages are:
--expressions have to be of SQL types
--an INTO clause is expected in this SELECT statement
What am I missing here?(1) First of all I am executing the whole script in SQL*Plus, thats why I use SQL*Plus command like the SLASH Operator.
<br>
(2)
SQL> VAR cur refcursor
SQL> CREATE TABLE mytemptable AS SELECT ename table_name, deptno idtype, sal cnt FROM emp WHERE 1=0
Table created.
SQL> DECLARE
sql_stmt VARCHAR2 (200);
tname VARCHAR2 (30);
BEGIN
FOR tname IN (SELECT DISTINCT table_name
FROM SYS.all_tab_cols
WHERE owner = USER AND table_name LIKE '%EMP')
LOOP
sql_stmt :=
'insert into myTempTable select '''
|| tname.table_name
|| ''' table_name, deptno IdType, count(*) cnt from '
|| tname.table_name
|| ' group by deptno';
EXECUTE IMMEDIATE sql_stmt;
END LOOP;
OPEN :cur FOR
SELECT *
FROM mytemptable;
EXECUTE IMMEDIATE 'drop table myTempTable';
END;
PL/SQL procedure successfully completed.
SQL> PRINT :cur
TABLE_NAME IDTYPE CNT
EMP 10 3
EMP 20 5
EMP 30 6
3 rows selected.Since we DROP the table at the end we don't need an explicit commit, since all DDL statement will implicitly commit anyway. -
Error Message "Delete price or set "Invoice Expected Indicator" in PO.
Hi Gurus,
We are in extended classic scenario with version 5.0.
We are getting error message "Delete price or set "Invoice Expected Indicator" when we are releasing the PO from Release PO option.
We are getting this error message in below situation:
We created shopping carts without vendor then after approval PO gets created in "Held status". When we edit the PO & add vendor then system gives error message "Delete price or set "Invoice Expected Indicator" (Line 1).
In this case the invoice expected indicator is not sets when we add vendor in the PO but if we create Shopping cart with vendor & when PO create din that case the invoice expected indicator is automatialy comes.
Can any one please help me to resolve this issue.
Thanks & Regards,
Manish
Edited by: Manish Mamidwar on Jul 30, 2010 5:40 PMHi All,
I have the same problem, Delete price or set "Invoice Expected Indicator" in PO
I have an Item Position of the PO that is Limit of Liability and for this position type I will not make invoice, then I would like remove the flag of invoice execution, but a recived your same message, can you tell me how did you resolve this problem?
Kind regards
Valentina Mari
Edited by: Fuffo Fuffi on Nov 10, 2010 12:51 PM -
How do I set up an indicator to display for only 1 second?
How do I set up an indicator to display for only 1 second?
I am reading keys from a serial device and I turn on an indicator that corresponds to the key pressed
on the serial device but how do I set this up so that it only stays lit (enabled) for a second or two?
The indicator is inside of a case statement and turns on OK but I do not want it to stay on for more than
a second or two. How do I modify this to display for only a second or two?
(P.S. I am running an old version 8.2 and can only see vis that are 8.2 or older.)
thanksSimplest way to turn the indicator off (false value) after a set time is to use a Sequence structure (flat or stacked).
Frame 1, set to true,
Frame 2, Wait ms (wire millisecond value to wait)
Frame 3, set to false.
This method, however, prevents the code outside the case structure from running during that wait time.
Something more elaborate will allow the external code to run. What comes to mind is a shift register that holds the indicator name and the time stamp (in milliseconds) when it was turned on, in an array of clusters. Each iteration of your loop will check this register to see if a certain time has passed (current time stamp minus turn on time). If so, use a case structure to turn the indicator off and remove the elements from the shift register array (so you don't keep setting the indicator to false). The array will let you control multiple indicators independently.
A problem with this option could arise from multiple readings. Lets say you want to turn it off after 2 seconds, but you read the value again after 1 second (this means the indicator should be on for a total of 3). The code would still turn it off after the 2 second mark. Of course this really depends on the time intervals involved with your code. -
During creation of NON stock material PO from where system will pick price
Hello All,
While creating PO for non stock material from where system will pick the price?
If info record is there from where it will pick, if info record is not there then from where it will pick like that...
If existing PO is there or not
if existing contract is there or not
For non stock material should we maintain the material master or ?
Please advise me
Thanks in advance>
sapmm99 wrote:
> For non valuated material, material master is required or?
>
> As per my knowledge material master is mandatory only for stock materials. not for not valuated and non stock materials usually we never maintain master data for non stock and non valuated materials
>
> if i am wrong please advise me
Its upto you if you want maintain material master record or not for non valuated material. With material master you have a material code to input in the field of PO, without material master you put in short text. -
Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?
If a server supports resuming downloads then the download should continue where it left off.<br />
You can test that by simple starting a large download and wait a minute or so before pausing it.<br />
Then you can close and restart Firefox and see if resuming works.
You can set the pref browser.download.manager.quitBehavior to 2 on the about:config page.<br />
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior -
How to find the code in standard transaction from where event is trigered
I have a configuration in SWEC, to trigger an event, when a PR is change
For the Transaction ME52 (Change Purchase requisition), I want to go to the portion of the code, from where the function module for triggering the event is executed.
I have learnt that F.Ms for trigerring events programatically are
1. SWE_EVENT_CREATE.
2. SWE_EVENT_CREATE_IN_UPD_TASK.
3. SWE_EVENT_CREATE_FOR_UPD_TASK
So, I tried debugging the transaction ME52 by setting breakpoints at the following function modules.
1. SWE_EVENT_CREATE.
2. SWE_EVENT_CREATE_IN_UPD_TASK.
3. SWE_EVENT_CREATE_FOR_UPD_TASK.
But none of these were encountered.Hi Sameer,
Why not follow the reverse approach! First check the event getting triggered and then move backwards to the source of triggering the event.
Activate event trace from SWELS and then check the event getting triggered in SWEL.
I doubt if putting break-points in the FM would help...
Check if the event is being triggered by the BO method.
You can check the where-used list of the method and find out the source of the event triggering.
Hope this helps!
Regards,
Saumya -
Hi all,,I am new learner to ABAP. I want to know from where we need to start ABAP.Becaz as of now I am not following any order.Can anyone tell me the order to follow..
thanks in advanceHi,
http://cma.zdnet.com/book/abap/index.htm
Here are the few links which covers topic by topic.
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm SAP Online Help For Dictionary.
http://www.sappoint.com/abap.html
for SAPscripts
ABAP objects and control technology
IDOC
SapScript
Performance tuning
BAPI Programming
Visual Basic Integration - Using the DCOM Connector and BAPI OCX (Only available in Danish)
JAVA and the SAP java connector
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
for keywords
very useful link for all
http://www.geocities.com/victorav15/sapr3/abapfun.html
http://www.sapgenie.com/abap/index.htm
http://www.sap-img.com/abap.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
http://www.thespot4sap.com/
http://www.kabai.com/abaps/q.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sapassist.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt=
For FAQ
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
Modulepool
http://sap.mis.cmich.edu/sap-abap/abap09/sld007.htm
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
Weblog for receive email and processing it through ABAP
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
BADI
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
For Logical database
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/6a/8b14e2340d11d5b3ba0050dae02d7c/content.htm
very useful
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Useful link to websites
http://www.hernangn.com.ar/sap.htm
Useful for background
http://www.sappoint.com/basis/bckprsng.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6f/08703713bf277ee10000009b38f8cf/frameset.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/index.jsp?topic=/com.ibm.wbix_adapters.doc/doc/mysap4/sap4x41.htm
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
For posting weblog,
/people/sap.user72/blog/2005/06/28/sdn-weblogs-making-it-easier
Dynamic Internal table -weblog in sdn
/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table
Smartforms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
http://www.allsaplinks.com/smartform_example.html
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Workflow
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4b7eb453d11d189430000e829fbbd/frameset.htm
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
ALV
http://www.geocities.com/mpioud/Abap_programs.html
http://72.14.203.104/search?q=cache:NjFXTBr5lX8J:www.sap-img.com/abap/an-interactive-alv-report.htmALVInteractivereportsABAP&hl=en&gl=in&ct=clnk&cd=5
Mail
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm(for changing sender address)
http://www.sap-img.com/fu016.htm
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Sending mail in background or spool mail
http://www.sap-basis-abap.com/sapac018.htm
BOM Explosion
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
OLE
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
ALVGRID with refresh
http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.html
For language setting and decimal separator
/people/horst.keller/blog/2004/11/16/abap-geek-7-150-babylonian-confusion
Oracle queries
http://sqlzoo.net/
To format SQL
http://www.sqlinform.com/
SCOT settings
http://www.sap-img.com/basis/basis-faq.htm
Status Icon [ALV,Table Control,Tab Strip]
http://www.sapdesignguild.org/resources/MiniSG-old/from_develop/norm_status_icons.htm#positioning_4
ALV Group Heading
http://www.sap-img.com/fu037.htm
For multiMedia
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
Uploading LOGO in SAP
http://www.sap-img.com/ts001.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://www.allsaplinks.com/lsmw.html
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
OOPS ALV
OOPS - Events.
Editable ALV
Tree
TabStrip
Multigrid
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
Function Module
http://www.geocities.com/victorav15/sapr3/abapfun.html
My Links
Smartforms
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287(subroutine)
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
Table Control
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap-code-samples/table%20control%20in%20abap.pdf
HRABAP
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
RFC
http://johnv.sapgenie.com/docs/RFC.pdf
http://zerone.samcheok.ac.kr/Asp_pr/Language/.%5Cuploadfile%5CJCo%20Tutorial-1.pdf
http://www.sapgenie.com/sapgenie/docs/SAP%20Connectors.doc
BADI
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
Regards,
Laxmi.
Edited by: Laxmi on Mar 14, 2008 6:24 PM -
Issue with driver program ZSAPM07DR(From where this Program is called)
Hi All,
We need to find out from where the driver program ZSAPM07DR(this is a customized program of SAPM07DR). It has the
form Z_DLYNOTE .
So how to know from which place the Driver program is called.
Please help .
Thanks and Regards
Channappa SajjanarHi,
It is me not totally clear what you want with this question.
I think you are asking this because you want to change the calling program in such a way that is using the new ZSAPM07DR instead of SAPM07DR.
For this you do not have to change a program. This can be done by making settings (a kind of customizing).
Your print will be made with a certain outputtype. (ithink 1 of WA01, Wa02,Wa03, wae1, wae2, wae3, wee1, wee2, wee3, wf01, wf02, wlb1, wlb2, wlb3) with apllicationtype ME.
The settings can be made with transaction NACE.
for your program> start transaction NACE
click on application ME
click on outputtype
doubleclick on the right outputtype
then you see a prgram, a starting routine, and sapscript or smartform name.
Here you change your settings to your program and your sapscript or smartform or adobe interactive forms.
and save.
these setting are stored in table TNAPR.
Hope this helps you. success.
Gr., Frank
Maybe you are looking for
-
How can I sync my iPhone with the new iTunes without erasing my iPhone?
My iTunes computer crashed and I needed to format it. How can I sync my iPhone with the new iTunes without erasing my iPhone?
-
Can i use my TC as a NAS for both my mac and windows machines at home ??
im moving to my new place real soon and will have to set up my very own network. have set up the network before at my parents with no problems, as we were all using windows machines. with my new MBA, i am looking at 2 options: 1) get an indepedant wi
-
In testing 9 and X, "Compare Docs" we have a critical issue and really need help!
For years we have used Acrobat 7 to do PDF compares and we love it! However, the company recently advised we must upgrade to 9 and then eventually to X. In testing 9 and X, Compare Docs we have a critical issue and really need help. Our PDFs are p
-
Why does it take so long to recognize my camera?
I have a Canon EOS Rebel XS. When I plug it in, iPhoto jumps up and is in front on the screen, as it should, but then it takes 8 or 10 minutes for it to be identified and booted up into the sidebar. I just watch the wheels turn and the red light fli
-
.avi files and 'ms' format audio
Hi Folks, I have QuickTime 7 Pro and a .avi file I was sent (actually downloaded on FTP). I also have a host of other video players (MPlayer OS X 2, VLC, RealPlayer 10) All of them can play the .avi file but I get no audio. If I choose "Show movie pr