From which PI version we can use AF_Modules/AddSOAPHeaderBean?

Hi gurus,
You know we can use AF_Modules/AddSOAPHeaderBean module to add soap header by using the method of Praveen blog"AddSOAPHeaderBean" module. From which PI version we can use AF_Modules/AddSOAPHeaderBean? We are using PI 7.0 SP 12, but we find we couldn't use it cause the communication channel monitoring gave the following the error after we configured that parameter: "com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of AddSOAPHeaderBean."
Thanks in advance.

Hi xinjiang li,
As far as I know, AF_Modules/AddSOAPHeaderBean module is available from PI7.11 version on wards.
Regards,
Praveen Gujjeti

Similar Messages

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Why can't sign in in the apple store using my apple id? but from the itunes application in my computer which i downloaded, i can use my apple id to sign in...and while opening my apple store it appears blank..i don't know what happened?

why can't i sign in in the apple store using my apple id? but from the itunes application in my computer which i downloaded, i can use my apple id to sign in...and while opening my apple store in my phone it appears blank..i don't know what happened?

It's a straightforward port-forwarding issue.
You need to forward ports to the internal ip address of your apple tv as follows:
TCP 123
TCP 3689
UDP 5353
TCP 80
TCP 4343
TCP 53
This may also solve other problems you may have with homesharing...

Which Security version is Safari using for a secure connection

Now that SSL 3.0 can be compromised, how can I determine which security version Safari is using:
TLS 1.2, TLS 1.1 or TLS 1.0. Is there a way to force Safari to use at least TLS 1.0?

Thanks for the enormous amount of information.
Unlike Firefox, I do not see how to force Safari NOT to use SSL 3.0.
If that info was in your response, I must have missed it.
So once again: Is there a way to force Safari (using preferences) to use TLS 1.0 or higher?

Which XI Version I am using?

Hi
I want to know which XI version I am using, I read all the older threads but did not get the exact answer. I want to know the exact location/field which will give me the XI version.
I tried to do followign things but did not find the verion.
1. http://sapxi:50000 : This gives system info but where is the xi verion
2. System-->Status- Did not find the verion
3. In Integration Builder--Help-Information I found belwo info. can you tell me what is the XI version.
Version
Service pack: 09
Release: 645_VAL_REL
Latest change: 378069
Sync time: ${sync.time}
Thanks,
Nishant

Hi Nishant,
1) Just by opening either Integration Repository or Integration Directory. And after that goto Menu Bar> HELP MENU>Info. It will display you present server name and version(support pack) which is presently using by that user.
2)If you want to complete info about the system then just open the link http://<server_name>:<port>. There you will find a link with name "System Information", that will give you more information. It shows one option Kernal. Which is mentioned in kernal option, that is XI version.
Regards
Vijay

YouVideo and Audio Downloader(what version I can use) for my Firefox 3.6.28, I'm running OSX 10.5.8

I cant download youtube videos from my Firefox 3.6.28 version for my older PowerPC G5 Quad. I need to know the version of add-on, "YouVideo and Audio Downloader" that I use. I have never used this add-on before, not on my mac computer. I'm running OSX 10.5.8 and my version of Firefox version 3.6.28 is the only current version I can use. Appreciate any help!
David Hill

Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
(There’s a lot of good stuff here) and search for what you want.
The site will see if your Firefox and system is compatible. for you.

How to open project from an earlier version (RH x3) using RoboHelp 6.

Hello everyone, I need your help. I have recently upgraded
from RH x3 to RH V6. I have just completed the installation of RH6
after spending long time with Adobe customer support as it took
them long time to figure out how to provide me the unlocking key to
install RH v6.
BTW I have only installed RoboHelp 6 by itself. I did not
install their Source Control because we already have Visual Source
Safe which we have been using in our company.
Also, since I had Adobe Reader 8 installed on my PC, I did
not install Acrobat Element 7 either. As I suppose if Acrobat 7 or
higher is installed RH v6 was not going to install Acrobat Element
7.
Well, now after I have installed RH v6, my first step is to
find out how to open project from an earlier version (RH x3) using
RoboHelp 6.
RH x3 is installed on my old PC and I am working on my new PC
where I have installed RH V6.
Sorry, for providing you too many details, the purpose is
only to give you a clear picture.
Please, give me your feedback if I am doing everything
correct and how should I open the project from an earlier version.
Thanks

Hi Peter,
Thank you so much for the response. Actually, after I posted
the question on Forum we had lost internet connection for some time
and I just went ahead and tried it by myself.
This is what I did – since we use MS Visual Source
Safe, my all files were in the working folder of VSS in my c drive.
I just clicked the Open tab/More Files in RoboHelp Starter and
located the RoboHelp HTML Project File. It opened without any
problem. Everything looks alright.
Is there anything specific I should be checking to make sure
if it is working fine in this version of RH. Because I did not
create this project, somebody else did and I have never used this
tool before this is the first time I will be using.
I found your site pretty helpful though and it did have some
information about Source Safe. I still have one question related to
Visual Source Safe that Is RoboHelp v6 linked to VSS automatically
and check the files out from it automatically whenever a project is
opened or we have to manually set the link between the RH6 &
VSS.
In RH x3 whenever I would open a project it would prompt a
message that in order to open this project the following files need
to be writable, would you like to make them writable, selecting
that option would checkout all the files from the VSS to make them
writable. However, in RH V6 I opened an existing project and it
opened without checking out the project files from VSS. Do you have
any idea what’s happening?
Ps: Do you recommend any book on RH 6 for starters or any
other recommendation?
Your help is always appreciated

"Object Picker cannot open because no locations from which to choose objects can be found"

Hi,
When I try in AD management console in the domain controller to add a new group for a user I get the following error:
"Object Picker cannot open because no locations from which to choose objects can be found" error message when you try to select objects from an Active Directory domain in Windows 2000
Our domain controller is a W2000 cluster (two W2000 advanced server machines) and this happens in one of the nodes of the controller while in the other node it Works well (the difference between them is where it fails, has the resources: print,
file sharing and quorum services). Both nodes of the controller have the remote registry service disabled and in the node where it fails when you start this service it works well but I don`t think this is the reason because in the other node with remote registry
service disabled it works. Solutions from the following support articles don`t work:
kb 263231
kb 284914
I have checked that the situation is independent of the domain administrator who tries to add the group to the user.
Can anybody help me? Which is the reason of this different behaviour from one cluster node to another ?
Thanks.

Hi Milos,
Thanks for your answer but I think this is not the case because the problem is not with NTFS and we don' have these problems:
Users or groups that have Full Control access cannot delegate permissions.
Users who have Full Control access cannot make permission changes on a DFS share.
If you give the non-privileged user the right to log on locally and you log on locally to the file server where the error message occurs, you can successfully edit the ACL.
It only happens with the AD management console. Now, for us it is not posible to upgrade the system.

From which table and field can I get batch split indicator?

Dear friends,
There is batch split indicator at VL02N screen. From which table and field can I get this indicator?
Thanks regards..

Hi,
I dont think there is anythign called batch split indicator.
You can find that there is a batch split in a delivery if LIPS-UECHA field is updated for a particular delivery. If UECHA is filled, then the number means that for the item number mentioned in UECHA, those records are the split records.
i.e. For example say for a line item 10, there are 2 split items in a delivery. In this case, there will be two line items with LIPS-POSNR = 90001 and 90002. These line items will have LIPS-UECHA = 10. This means that the items 90001 and 90002 are the child batch items for the parent line item 10 as mentioned in UECHA field.
btw....u can check LIPS-CHSPL if this is what you are looking for.
I hope this answers your question. If you have any doubt, pls lemme know

I am using os x 10.4.11 on a 2.4 ghz intel core 2 duo. I don't believe I can install lion on this system but was wondering what is the highest version I can use?

I am using os x 10.4.11 on a 2.4 ghz intel core 2 duo. I don't believe I can install lion on this system but was wondering what is the highest version I can use?

Here are the requirements for Lion:
http://osxdaily.com/2011/06/07/mac-os-x-10-7-lion-system-requirements/
In order to install Lion you have to have Snow Leopard and then update to 10.6.8:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Personally I suggest that you stop at Snow Leopard. It still is the most efficient OS that Apple has devised and it still works great. Go to the Lions only if there are feature that you really need. There may be a price to pay in slower performance though.
Ciao.

TS1307 I am using mail for emails. It receives fine but it will not send. I am using an o2 account (smtp.o2.co.uk). Is o2 incompatible with mail? if so can you tell me which email application I can use instead? Many thanks Steve

I am using mail for emails. It receives fine but it will not send. I am using an o2 account (smtp.o2.co.uk). Is o2 incompatible with mail? if so can you tell me which email application I can use instead? Many thanks Steve

Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other

What final cut version I can use it on PowerMac 5G?

What final cut version I can use it on PowerMac 5G, I am using:
Power Mac 5G 7,3
Processor: PowerPC G5 (2.2), Speed: 1.8 GHz
Number Of CPUs: 2 L2
Cache (per CPU): 512 KB
Memory: 3 GB
Bus Speed: 900 MHz Boot ROM

In January 2006, Apple stopped selling Final Cut Pro as a stand-alone product. In March 2006 the Universal Binary 5.1 version was released as part of Final Cut Studio. Upgrades were achieved by sending the original installation discs back to Apple with a fee. One noticeable difference is that the Intel versions of Final Cut and Motion no longer recognize After Effects plug-ins. Instead, Apple released its own universal plug-in architecture FxPlug.
http://en.wikipedia.org/wiki/Final_Cut_Pro
I think you'll want to max it out to 4 GB of RAM though.

Poll: Which LabVIEW version do you use for new projects?

I have posted a poll on the LAVA forums, here:
Poll: Which LabVIEW version do you use for new projects?
Thank you for taking the time to tell us your thoughts.

I'm giving this thread a bump to remind eveyone that we want to know your opinion. Please vote in our poll.
Thanks,

Which tomcat version to be used for jdk6?

Hi
Which jdk version is best compatible for Tomcat5.0? Can I use jdk6 ? Also tell me which is the most suitable tomcat version to be used for jdk6. Also tell me what are all the Tomcat settings (environmental variables etc.) to be made before running the web applications?
Thanks in advance.

I mean can i use tomcat5.0 with jdk6.Yes.
The JVM you are using is pretty much irrelevant as long as it is above the minimum. For Tomcat5, thats JDK1.4 I think.
The problem is not with JDK6, it will be with your understanding of Tomcat.
but the programs i put in the web-apps folder with root directory(say firstapp) are not runningThe ROOT directory is the "default" web app. Not the place where you should deploy new web applications.
All your web applications (with a WEB-INF directory in them) should be off the folder "webapps"
[Tomcat 5 docs|http://tomcat.apache.org/tomcat-5.5-doc/appdev/deployment.html]
Having said that, IMO you should be using at least Tomcat 5.5, and possibly even Tomcat 6 if you want the latest version.
Cheers,
evnafets

What is the most current iweb version I can use to maximize my capabilities?

I have G5 a power pc running 10.4.8 because of final cut issues - what is the most current version of iweb I can use to maximize my capabilities? i have it right now and can only host one site in it, etc. (though I build multuiples)
brent

The latest version of iWeb you can run with 10.4.9 is iWeb 2. iWeb 3 requires Leopard, 10.5.8 or later.
OT

From which PI version we can use AF_Modules/AddSOAPHeaderBean?

Similar Messages

Maybe you are looking for