From Windows 8.1 to Windows 10 to Windows 7 for HP-15f215x

I need help very quickly for my computer. I've been through Windows 8.1 which was garbage to Windows 10 which was even worse to Windows 7 which was the last good thing Microsoft made. My F unction keys aren't functioning correctly, I can't adjust my brightness and my screen is bright as hell as if it's been turned up all the way, and I am missing my drivers that I need desperately like Network adaptors, and other devices like PCI Encryption/Decrytion Controller, SM Bus Controller, and Universal Serial Bus (USB) controller. I want to get this computer running and not go back to windows 8.1 please. Thank you.
This question was solved.
View Solution.

See if you can change the brightness by installing this software.
HP Quick Launch Software
File name: sp56929.exe
If that doesn't work, I won't be able to help you with that, and you should be able to adjust the brightness in the power options menu in the control panel using the brighjtness sliders (if the AMD graphics driver successfully installed).

Similar Messages

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

Error while updating a custom Windows Azure Diagnostics configuration xml from powershell. "Invalid update to extension reference for role"

I am attempting to upload a manually edited WADConfig xml to my VM. The WAD service is functioning correctly, I needed to add some custom WinEventLogs. The prescribed steps result in an error.
What am I overlooking?
I am following these instructions:
Step 5: Remotely install Diagnostics on your Azure Virtual Machine
azure.microsoft.com/en-in/documentation/articles/cloud-services-dotnet-diagnostics/#virtual-machine
$storage_name = "wadexamplevm"
$key = "<StorageAccountKey>"
$config_path="c:\users\<user>\documents\visual studio 2013\Projects\WadExampleVM\WadExampleVM\WadExample.xml"
$service_name="wadexamplevm"
$vm_name="WadExample"
$storageContext = New-AzureStorageContext
-StorageAccountName $storage_name -StorageAccountKey $key
$VM1 = Get-AzureVM
-ServiceName $service_name -Name $vm_name
$VM2 = Set-AzureVMDiagnosticsExtension
-DiagnosticsConfigurationPath $config_path
-Version "1.*"
-VM $VM1 -StorageContext $storageContext
$VM3 = Update-AzureVM
-ServiceName $service_name -Name $vm_name
-VM $VM2.VM
Unfortunately, I am receiving this error:
Update-AzureVM : BadRequest: Invalid update to extension reference for role: XXXXXX and reference: IaaSDiagnostics.
What's missing from the above script?

Hi,
Since Azure SDK 2.5 uses the extension model the diagnostics extension, the configuration and the connection string to the diagnostic storage are no longer part of the deployment package and cscfg. All the diagnostics configuration is contained within the
wadcfgx. The advantage with this approach is that diagnostics agent and settings are decoupled from the project and can be dynamically enabled and updated even after your application is deployed.
Due to this change some existing workflows need to be rethought – instead of configuring the diagnostics as part of the application that gets deployed to each environment you can first deploy the application to the environment and then apply the diagnostics
configuration for it. When you publish the application from Visual Studio this process is done automatically for you. However if you were deploying your application outside of VS using PowerShell then you have to install the extension separately through
PowerShell.
There PowerShell cmdlets for managing the diagnostics extensions on a Cloud Service are -
Set-AzureServiceDiagnosticsExtension
Get-AzureServiceDiagnosticsExtension
Remove-AzureServiceDiagnosticsExtension
You can use the Set-AzureServiceDiagnosticsExtension method to enable diagnostics extension on a cloud service. One of the parameters on this cmdlet is the XML configuration file. This file is slightly different from the diagnostics.wadcfgx file. You can
create this file from scratch by either following the article that you are referring to or you can modify the wadcfgx file and pass in the modified file as a parameter to the powershell cmdlet.
To modify the wadcfgx file –
Make a copy the .wadcfgx.
Remove the following elements from the Copy:
<DiagnosticsConfiguration xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<PrivateConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<StorageAccount name=" " endpoint="https://core.windows.net/" />
</PrivateConfig>
<IsEnabled>false</IsEnabled>
</DiagnosticsConfiguration>
Make sure the top of the file still has xml version and encoding –
<?xml version="1.0" encoding="utf-8"?>
Effectively you are stripping down the Wadcfgx to only contain the <PublicConfig> section and the <?xml> header. You can then call the PowerShell cmdlet along with the appropriate parameters for the staging slots and roles:
$storage_name = ‘
<storagename>’
$key= ‘<key>’
$service_name = '<servicename>'
$public_config = '<thepublicconfigfrom_diagnostics.wadcfgx>'
$storageContext = New-AzureStorageContext –StorageAccountName $storage_name –StorageAccountKey $key
Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config –ServiceName $service_name -Slot ‘Staging’ -Role ‘WebRole1’
Hope this helps !
Regards,
Sowmya

Downgrading from windows 8.1 single language to windows 8

Hi, i want to downgrade my laptop pavilion g6 2231tx from windows 8.1 single language to windows 8 which came in default with my laptop.
My question: since my lappy came pre installed with the windows 8 (64bit) and then got upgraded. So if i refresh my pc via the recovery partition on my HDD will it revert back to win 8 or do i have to use the recovery discs i made and will i lose my entire data on C:
Reason : i am facing a lot of issues with my laptop recently specially while gaming i never faced any issues with gaming earlier when my lappy was running win 8 no lag or drop in fps as such but since i upgraded (which was against my will as microsoft one fine day decided to throw win 8.1 down on my face) . Some how was able to get the amd radeon switchable graphics back up and running but it seems it has no practical use over there as such
apart from that my computer has degraded in performance since i have upgraded i tried to use win 8.1 since the past 1 year just coz it had all my programming IDE loaded and removing it would just be all the more hassel but even those applications have started responding really slow now most just take up hell lot of load time.
my system specs are :
2.4 GHz Intel Core i3-3110M processor
4 GB 1600 MHz DDR3 RAM
AMD Radeon HD 7670M (1 GB DDR3 dedicated)
Looking forward to your early replies. thanks in advance

aakash_dhar
Welcome to the HP Community Forum.
I am not going to try and talk you out of doing this -- you are the administrator.
You might be in for a rough ride regardless of which path you take back to Windows 8.
Standard Refresh removes your installed programs and your installed Browsers -- the security programs -- everything that is not "bare bones" -- and that assumes that it will work.
READ please and know what you are trying to do:
HP PCs - Refresh Your PC to Resolve Problems (Windows8) - c03538721
The Recovery Partition may -- or may not -- still be in working order. The Upgrade to Windows 8.1 may have destroyed the Recovery Manager.
Before you do ANYTHING, please back up all your data to an external drive -- back up your most critical data to more than one place, perhaps to a USB drive or to Cloud >> somewhere so you can get to it.
What if your home made Recovery Disks do not work?
You might call HP and see if you can purchase a Recovery Set. Because you have a working computer right now, you might make the call BEFORE you take apart your Operating System.
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Including UK and Europe
Something nice to know:
Boot / Startup Options for Windows 8
Safe Mode can easily be added to the boot screen!
How to Add "Safe Mode" to Windows Boot Manager in Windows 8 and 8.1
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Since upgrading to FF v4, every time I open a "new window", all other instances of FF windows open, how can I keep this from happening?

Since I started using FireFox version 4, every time I open a "new window", all other instances of FireFox windows open up. This is annoying as it often covers up instances I am currently using with instances that I don't wish to use right now. I can't seem to find a way to keep this behavior from occurring.

Try go to '''about:config''' search for '''browser.startup.homepage''' change its value to:
'''about:home''' - default page 
'''about:blank''' - blank page 
'''url''' - a page that you want
Also:
*[https://support.mozilla.org/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
*[https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems Reset Firefox]
*[https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware Problems caused by malwares]
*[https://support.mozilla.org/kb/how-to-fix-preferences-wont-save Preferences won’t save]
*[http://kb.mozillazine.org/Preferences_not_saved]

I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Liv

I can't open mail on Hotmail from Firefox. I can from Safari. I can open the Hotmail account page and it is complete w/ my new messages, but when I go to open them I get this messeage..."Please refresh your browser window. When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure. " when I sign in again there is no change. in English
== URL of affected sites ==
http://http://sn135w.snt135.mail.live.com/default.aspx?n=2087215863
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

"Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

When I click on the - fire fox disappears from the task bar; it is still open but gone from the task bar, if I click on any icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

Question
When I click on the - to minimize fire fox, it does not close the window but the firefox icon disappears from the task bar; it is still open but gone from the task bar, if I click on any other icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How can i transfer my iTunes library from the iPod Touch to my new Windows 7 computer?

My old computer died and I need to move the iTunes library from my iPod Touch to the new Windows 7 computer - how can I do that?

Try this post.
tt2

How can I export songs from my itunes library,stored on a Windows 7 PC to iCloud

How can I export songs from my itunes library,stored on a Windows 7 PC to iCloud

Please see this:
Scott P.: Does iTunes support non-iPod devices?

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions?

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions? I am fimilar with changing the setting for all network partitions(defaults write com.apple.desktopservices DSDontWriteNetworkStores true), but that is undesirable when I connect my laptop to my home network. A preferable solution would be where I could control the writing of these files based on disk format (NTFS vs HFS+).

Go to MacUpdate or CNET Downloads and search for ds_store. There are numerous utilities for preventing them from being transferred to Windows systems.

How do I include/show data from a child table in a Modal Window?

How do I show data from a child table in a Modal Window?
I have an application where each customer might have multiple addresses and phone numbers which are stored in child tables. When I show the customer in a record on a screen I can place a Modal Window button on the screen which can be pushed at runtime
to display detail information for the particular customer parent table which works great. However, I would also like to display the data from the address and phone number child tables. Is there a way to do that? Or can I just launch a hole separate screen
which would automatically display the needed data for the particular customer? If yes, how?
Thank you for any help.

I am not even sure how to describe my situation in such a way that this forum incident would be of benefit to other people as I think it is fairly unconventional.
The “add contactaddress” link does not show up on the right.
The contactaddress table is a child of the contact table.
The contact table is a child of the contactlink table.
And the contactlink table is a child of the person table.
I have it set up this way because the contact in the contact table may be a contact to multiple persons in the person table and I do not want to re-enter the contact info every time the contact is used.
In the list detail screen of the person table I can see the contactlink child collection so that I can see the name of the person in the contact table at runtime. However, the contactaddress collection is not related to the person table so it does not show
up on the right hand side of the design screen as an “add contactaddress”; nor is there “add contact” link.
What I would like to happen during runtime is that it is not necessary to switch screens from the person list detail screen to a contact list detail screen to see the addresses and phone numbers for the contact.
Is my setup unnecessarily convoluted? Is there a better way? Please see the two snapshots below.
Perhaps there is a way to call up a Detail screen from the List Detail at runtime?
Anyway, if you are still reading, thank you very much for your help.
jjjjj

Open references of other list items from a list item in the same window or tab

Hi there,
We have migrated from lotus notes to sharepoint. We have converted the lotus notes forms to sharepoint forms. Basically the list items are pages and there are links of other pages in a page.
My problem is I want to open the other pages in the same tab or window and not in a separate window.(currently the links open in a separate window which is not the requirement.)
In terms of sharepoint I would say,
I have references(links) to other list items of the list in a single list item. I want to open the other list items in the same window (tab).
How can we achieve this?? If possible without much codes??
Please suggest.
Any help will be highly appreciated.
Thanks in advance

See:
*http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
For links opened via JavaScript you can look at this pref:
*http://kb.mozillazine.org/browser.link.open_newwindow.restriction
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Setup.exe from Boot Camp won't work with Windows Xp Home SP2

Hi,
I just bought the great MacBook Pro. So I work over years in Windows it's absolutliy necessary to migrate my old System to MacBook. I succeeded in cloning my old installation completly to the MacBook and Windows is activated. when I start windows, of course no MacBook drivers are installed, so I have only a minimum of functionality. Now I want to start the BootCamp to install the drivers. But if I start "Setup.exe" it's ending immediately with: There were errors... before Boot camp could be initialized.
I downloaded the newest BootCamp (3.1) and start it, the program crashes!
I can't get it working!!! What have I to do - please help me!
I use Windows XP Home SP2.
Thanks!

If you didn't try installing Boot Camp from your OS X disc, try that first.
From what you wrote it sounds like you somehow cloned your old install of windows over to a fresh partition. Depending on how you did this, the problem might lie here.
First, what version of OSX are you running?
If your MacBook Pro is new, it should come with Snow Leopard, which wouldn't explain the problem.
How exactly did you clone windows over?
Depending on how you cloned windows, your easiest solution might be to back up any files and applications you need from windows, remove the current Windows partition, and create a new partition and installation of Windows through Boot Camp on OSX. Normally Boot Camp should install its drivers after a successful installation of Windows.

No sound witnessed from my HP pavillion dv6 notebook pc, windows vista home premium

their is no sound from my hp pavillion dv6 notebook pc, windows vista home premium, trouble shooted online through microsoft, windows but no issues found, restored to an earlier date. yet it is not working.
core 2 duo cpu, T6500 @2.10 GHz
the message received is:
Windows Media Player encountered a problem while playing the file. For additional assistance, click Web Help.
but web help found no problems with the pc
Kindly help activate the sound system

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I currently have an old version of Photoshop Elements, it is version 5.0. I recently upgraded from my old Windows XP computer to a new Windows 7 computer. My question is: Can I install this version 5.0 on my new windows 7 computer without any problems?

I currently have an old version of Photoshop Elements, it is version 5.0. I recently upgraded from my old Windows XP computer to a new Windows 7 computer. My question is: Can I install this version 5.0 on my new Windows 7 computer without any problems? my email is: [email protected] Thank you!

Do not know about 5, but, just installed PE 6 on I7 64 bit and it works.

From Windows 8.1 to Windows 10 to Windows 7 for HP-15f215x

Similar Messages

Maybe you are looking for