Front earphone plug does not cut out speakers or plays any sound

I have an HP Pavilion Media Center TV m7480n Desktop Pc. I upgraded to Windows 7 32.  After install the front earphone plug no longer cuts out the speakers or plays any sound.  I updated all the Realtek drivers.  In Realtek HD Audio manager the green and pink front plugs are light color.  I tried both the advanced settings to play back devices.  Neither work.  I had the front plug and the headphones checked out and both are functioning.  I have been using the rear plug for my headphones and switch plugs with my speakers when I need them.  I miss my front plug.  Any Ideas?

Hi CanadaDry,
You probably just need to update either your audio driver or your chipset directly from the component manufacturer. I'd start with the audio driver first if everything else on your PC is working after the upgrade. But if there are other things not quite right like USB ports not working, then I would install the chipset driver update too.
Your PC has a Realtek Audio Device, so here is a link to the Realtek downloads:
http://www.realtek.com.tw/downloads/
Select "High Definition Audio Codecs", accept the agreement, and then download and install the Win 7 32bit driver.
If that doesn't work, here is a link to the Intel 945P Chipset driver for Win 7:
http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19607&lang=eng&OSVersion=Windows%207%...
I hope this helps. Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Similar Messages

  • My 8520 does not ring nor vibrate or play any sounds.

    Blackberry Curve 8520
    v.5.0.0.900
    Bundle 1626, Platform 5.2.0.96
    When an incoming call, email and or message is received only the LED blinks. I get no sound/ringtone nor does the phone vibrate. I've checked the phone's settings and all appears to be as it should. Any help would be appreciated.
    Thanks in advance, Matt

    I am having the same issue. I treid some different tones and realized it is just that certain rings that came on my blackberry no longer play. Also, none of my songs or downloaded ringtones play.

  • TS3376 The microphone on my i-pad mini does not seem to hear/pick-up any sounds when recording videos, facetime etc.  Has anyone else had this problem?

    The micro phone on my i-pad mini seems to have stopped working.  The unit has never been rough housed and is always kept in a safe environment....we can hear everything fine, but no one can hear us and it does not pick up any sounds when recording video.  Any suggestions on how to fix it?

    I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

  • HT203260 earphone plug does not plug into my iphone 5C, what's up with that????

    I can not plug the supplied earbuds into the jack on my new iphone 5C, is there a problem or is the phone broken

    There's an obstruction in the port, the port is broken, or (most likely) you're not pushing hard enough. It can be stiff when the phone is new.

  • External hard drive does not come out in desktop

    greetings! whenever i plug in an external hard drive or a USB flash disk through usb, it does not come out in the desk top. before, it used to come out, now it doesn't. i am still using the exact macbook. i think i touched something in the settings. please help

    Go to finder and choose preferences under finder in the menu bar. Now check and see if under General you have the choices clicked of what you want to show on the desk top.

  • I installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

    i installed win8 64bit on macbook pro. everything running good but i am not getting sound in speakers. i am getting sound in earphone/headphones but not in main speakers.

    Have you checked System Preferences -> Sound to see the Output when nothing is plugged in the headphone jack? Also, check if the headphone jack shows a faint read-light, which is the optical laser.

  • How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of

    How do I get the page to shift up by as little as 1/8" so it does not cut off the bottom coding of official documents? There is usually plenty of white space at the top. Center command does not seem to help.

    You cannot change pdf files in Reader. You can set it to print with a shrink to fit option.

  • BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

    In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
    . Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
    after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error  .*
    As suggested by Dean Q I used   INCLUDE mm_messages_mac,
    tried im_item->set_foreign_trade( ls_mepo_eipo)  still when a valid Commodity code is entered after an invalid one  it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method  PROCESS_ITEM.    Any help is welcome
    Nivedita

    Hi,
    In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
    If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
    Regards,
    Poornima

  • I have a disk in my mac and came not get it out?  I use the command E key to eject but it does note come out?

    I have a disk in my mac but it does note come out useing command e to eject? how do i get it out or do I have to get it jixed?

    Force eject a stuck cd/dvd
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • Can I shrink the iTunes webpage on my PC monitor so it does not cut off the right and left margins?

    Can I shrink the iTunes webpage on my PC monitor slightly so it does not cut off the right and left margins?

    Can you?  Are you capable of resizing the window?
    Only you can answer that question.
    If you want to know if it is possible, yes, it is possible.

  • Gmail task list does not pop-out

    After installing 3.6.7 gmail task list does not pop out. When I click the pop-out arrow, the task list opens in another tab, not in another stripped down window like it used to. Any ideas?
    == URL of affected sites ==
    http://

    Dear,
    Is this quality Plan is back dated and Lot size should be 1 to 9999,999.
    Why are you creating rate routing? check lot for 04 insp type in QA02.
    Or for old material just create one new order and test it once again.
    You can check the statuses in config.
    QM>Quality Planning>Inspection Planning>General>Define Task List Status.
    You should find that "4" is in there with all the check marks on.
    QM--> Quality Inspection --> Inspection Lot Creation --> Maintain Inspection Lot Origins and Assign Inspection Types.
    There is a column called status. For each inspection ORIGIN, you can specify the status of the inspection plan. It appears someone in your system changed the 4's to an X and then created the status "X".
    Regards,
    R.Brahmankar

  • WRT300N does not sends out WLAN signal to card WPC300N ???

    Hi all,
    Another WRT300N problem
    It seems that my router does not send out a signal...
    I did update to the latest fimware, all security like MAC, key, firewall etc are disabled, ssid broadcast is enabled, so there are no restrictions no more
    LAN intenet connection is no problem, that's the way i work now.
    When i scan with the linksys wireless network monitor V.1.09, i cannot trace the router, neither with xp and the integrated wifi card from my notebook.
    However just a few times the router flipped on the network monitor, but when i tried to connect , it didn't work : no association with acces point...duh....
    A few seconds later he was lost again...
    I also tried all channels even auto settings.
    I do not know what to do or try for the moment to make the router send out his signal.
    Anyone any idea or had the same problem ???
    Many thanks to help me out !

    Hi…I think you have already tried everything on your router, now uninstall the wireless card WLAN utility and reinstall only drivers for your wireless card, through found new hardware wizard. Or you can even download the latest drivers from website and install them.

  • System.out.println does not print out anything

    I'm wonder why the dos mode does not print out the System.out.println.
    My code has:
    import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class test extends HttpServlet {
       public void doGet(HttpServletRequest request,
       HttpServletResponse response) throws IOException,
       ServletException {
          System.out.println("Hello");
    The compilation is ok... but it does not display anything... how come?

    "System.out.print()" prints to the log file of the tomcat server. in order to print on the screen use JspWriter.
    import java.io.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class test extends HttpServlet {
    public void doGet(HttpServletRequest request,
    HttpServletResponse response) throws IOException,
    ServletException {
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    out.println("Hello");
    //System.out.println("Hello");
    Hope this helps!

  • Dbca does not come out after 100%

    I have installed and configuredthe Oracle 9i Rel2 on RH Linux 9.
    When I followed dbca steps to create a database, it does not come out after reaching 100%. I had to kill the process to end it. What could be reason? Because of this the init<SID> file is also not created.
    Please explain
    Mehul Trivedi

    I have installed Oracle9i on RH9 and I was able to use
    the dbca and really If your swap values in the OS are fine
    I do know whatelse you can check.
    If you want to create a database and the dbca is not
    functioning you have another option ( Create it manually )
    Chapter 2
    Administrator's Guide Contents / Search / Index / PDF
    http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
    Joel P�rez

  • Powermac CD does not come out

    Ever since i got this powermac, it constantly does not spit out cds when i eject. I tried Disk util, Open firmware, unix, finder, mouse at startup, and only mouse at startup works sometimes. Other times, it holds on to it continuosly.
    Please help!
    ( I don't know if this has already been answered or posted)
    it has been through a history of bad hard drive fixing itself, also.
    Powermac G5 Mac OS X (10.4.7) Weird history of Crash Repair
    Powermac G5   Mac OS X (10.4.7)   Weird history of Crash Repair

    There was a series of PowerMac's that got the wrong sized spacers for the superdrive and therefore the tray may not eject correctly due to height problems.
    Contact Apple and give them your serial number.
    If your handy you can switch out the superdrive yourself and Apple will just send you the replacement.

Maybe you are looking for