Front End network time and GUI time

Hello,
I am having a few doubts on the performance monitoring of SAP servers.
GUI time - is the time taken for several communication steps between the SAP R/3 server and the local SAP R/3 frontend.
After this definition i have a few doubts.
1) what is the difference between, GUI time and front end network time?
2) While calculating the processing time do we substract GUI time from the actual respone time?
Please help.
Thanks.
Regards,
Siddhartha

Hi,
F1 help provides the exact information of the each time specified in st03n..
Further for your information:
Frontend time:
The front-end network time (FE Net time, fenettime, sometimes also called guinettime) is the time span that is consumed for sending data from/to the front end.
However, no roundtrips (RFCs) for the GUI are included. These are entered in the GUITIME.
If RFCs are involved on the server side, this time is specified with an incorrect value.
The FE Net time is formed by the difference that arises between the response time from the view of the frontend and from that of the application serve
GUI time:
The GUI time is the time used in the network and the local front end for these communications steps (not the time in the application server, however). The GUI time does not contain the front end network time.
Regarding the Processing Time:
Please Refer following note 8963.
For Response time Refer note 1063061 which gives clear idea of What is response time.
Thanks and Regards,
Balaji.S

Similar Messages

High roll wait time, gui time and processing time

Hi all,
We are having a performance issue with the system at the moment. After running ST03N and STAD, we have determined that we are having abnormally high roll-wait, GUI and processing times.
Here are some results from STAD:
CPU time: 2956ms
Processing time: 4417ms
Roll wait time: 1319ms
GUI Time: 2859ms
Can someone direct me towards finding the problem?
If you need more information please let me know. I would post a screenshot if I was able to.
Thanks,
HL

Hi,
Regarding Performance Of SAP system it will not be possible to Come to conclusion with the one Single data.
GUI time is basically the time spent in front end i.e Your Network load or such time
Coming to CPU time Can you see ST06 what is the CPU Utilization of your system?
Roll Wait time is the time Spent in buffer if you can share us the OS and Memory configuration.
We can Try to tune the Roll memory ( extended memory tuning) so that we can try to reduce the Roll time.
If possible try to find the Top Dialog Response Time Transaction Is it Standard or for Z Programs.
https://cw.sdn.sap.com/cw/docs/DOC-14387
Go through this link you might get clear idea of performance.
Thanks & Regards,
Balaji.S

Lead time and Route time estimation used for deliveries

Dear Friends,
Can anybadyu let us know how to estimate lead time and route times for deliveries, and what is the exact meaning of the these two with differences
if possible can you please give me the configuration steps, as i know at this movement route times are maintained in the route and lead times are maintained in the material master MRP view.
what was these field impacts in the delivery..
requesting your view as soon as possible
Thanks
raju.

Hi there,
Lead time is the time in which the material will be available. It is called Replenishment lead time RLT. It is maintained in MRP view of material master. RLT can either be inhouse processing time for inhouse manufactured goods or order time + goods receipt processing time for externally procured goods.
Whereas time mentioned in route is used to calculate transit time during delivery scheduling. That is the time taken for the goods to reach customer from shipping point.
Both the times are imp for delivery scheduling.
When the customer places an order, if the material is not available, then the system will take end of RLT as material availability date. From that date, it will carry forward scheduling & propose a new confirmed delivery date.
Regards,
Sivanand

Support the news front-end languages of the GUI

Hi all,
I want know about the roadmap for support the news front-end languages of the GUI, especially about Brazilian Portuguese language.
Thanks,
Renato Soti
Message was edited by:
rjsoti

Hi Renato
As with other Oracle software the GUI translation in other languages is based on a business case basis. Pl send me an email at [email protected] , detailing the customer case and I will take it up with all concerned folks.
Thanks
Vishal

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

Front-end HTTP Server and Performance with .jspx pages?

This is more of a general question that I'm looking for validation:
If the majority of our website is implemented as .jspx pages, with very few straight HTML pages, is there benefit in deploying to an environment with a separate HTTP front-end web server and back-end Application server (java container)? For example, I'm deploying to Tomcat as both the HTTP server and Java Application server for the .jspx pages; is there a performance advantage in deploying to an Apache HTTP server with a connector to Tomcat if I'm primarily serving up .jspx pages? I'm not as familiar with Oracle AS architecture, so my question is primarily around Tomcat deployment.
thanks

This is more of a general question that I'm looking for validation:
If the majority of our website is implemented as .jspx pages, with very few straight HTML pages, is there benefit in deploying to an environment with a separate HTTP front-end web server and back-end Application server (java container)? For example, I'm deploying to Tomcat as both the HTTP server and Java Application server for the .jspx pages; is there a performance advantage in deploying to an Apache HTTP server with a connector to Tomcat if I'm primarily serving up .jspx pages? I'm not as familiar with Oracle AS architecture, so my question is primarily around Tomcat deployment.
thanks

If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
tt2

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini

How to track the login time and logout times of clients

hai
please give me the solution
suppose there are 5 systems connected in LAN.
how to track the login time and logout times of clients
for a given time(may be one day or 1 hour) using any programming language.
please give me the solution

When the client logs in you write the client's ID and the current time to a database. Likewise when the client logs out. Assuming of course that you have a program that knows when those events occur.

Usage dependency is created at Build time and installation time

Hi,
The infrastructure guys have selected the usage dependency as Build time and Installation time, while creating software components.
"Y" SWC is created as depedency for "X" software component.
In SLD(software catalog), we are able to view the Y component as dependency in X component(at both build time and installation time). In usage dependency we are able to view Y component but when we click Y component in usage dependecy we are also able to view X component. Is there any problem with this ?
There is another issue. we are able to view basis object(in IR) in Y component but not in X component. Actually as per the above configuration basis object in IR should appear in X component.
Please refer to another forum which may give you some more idea.("BPM - Message interfaces of one component are not appearing in another comp") pasted on 17 Nov,2006.
Please could you provide us the inputs.
Thanks,
Ramesh

hi,
as you see per my weblog try choosing Installation Time
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
more about it on:
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/8d784289b4de54e10000000a155106/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

In Material Master Screen,functionally what is Safety time and safety time

In Material Master Screen,functionally what is Safety time and safety time indicator in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

I have put my serial number in several times and each time it is invalid now what?

I have put my serial number in several times and each time it is invalid now what?

Serial number in what program?
Are you sure you have a serial number and not a redemption code?
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
Serial number and activation chat support (non-CC) may help
http://helpx.adobe.com/x-productkb/global/service1.html

GR Processing Time and Delivery Time not coming in CS11 Output screen

Hi,
I am executing a BOM explosion report using CS11.
In the CS11 report output I added columns for GR Time and Delivery Time using change layout option.
After changing layout when I see the details in columns of GR Time and Delivery Time all the values are ZERO '0' for all the components in BOM.
I checked the material master for component items and find that in MRP view values are maintained in GR Time and Planned Delivery Time field which are also seen in MARC table.
I do not know from where CS11 is fetching the values for display of GR Time and Del. Time.
How can we populate the values in CS11 report out put for GR Time and Delivery Time? Am I missing some master data maintenance apart from Material Master?
Regards...

Hi Prasobh,
I looked at the note 101262 and it seems that it is suggesting us to create a new Z report by copying existing report and then modify the WRITE Bloack in new report to display GR Time and Del. Time.
Is my understanding correct? If yes can you share with me the steps in some more details then mentioned in note 101262 that I need to follow for addressing this requirement.
If no can you suggest any solution that you know by which it is possible to include GR Time and Del. Time in CS11 output without Z development.
Regards,

I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

Try boot into Safe Mode and try again.

Front End network time and GUI time

Similar Messages

Maybe you are looking for