Front end problem

<B>hello
</B>
<BR>
i have a simple question .as all of us when make a small application that is accessible over the web has two parts(always).one is for all users of this site and other only for administators.
front end accessible over the web is jsp page(in my application).my question is ,is it more appropriate to design the front end for adminstrators using java components.like by using javax.swing package or it must be the jsp page in which beans are used or applet. i have a confusion in the usablity of these as i want to design interface for admin usind swing components.
which approach is better and why ?plz expalin ur answer also. waiting for reply inorder to design my application. thanX.

I would choose jsp/servlets with login protection for admins only. I would choose that, because I like to program, but like to do things fast. With applets or stand alone java applications, I would have to code the client server communication and still have to code some login protection. Also you are less likely to run into firewall problems when you just use port 80 and http like the users do.

Similar Messages

BI 7.0: Report Designer / WAD Front-End Problems

Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
I'm getting following errors when i try to execute with new version of Business Explorer.
1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
this query works fine in BEx with New version as well.
2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
Is there any setting or configuration files i should change?
i searched in OSS notes for these kind of errors, but i couldnt not find any
please let me know as its urgent.
thanks in advance..
Deepak Kunavarapu

Hi,
we're running NW2004s, BI 7.0 SP06.
I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:02_16/02/06_0017_46228450
See the details for the exception ID in the log file
Do I need the integrate an platform_add_on? Does someone get the same errors?
Thanks in adavance.
Benjamin Herrmann

11.5.10.2 front end problem

Hi All,
In front end concurrent Processing is showing down,what might be the problem.

Hi,
Please review the following documents.
Note: 309271.1 - Web Components Status in OAM Shows All Down Even When the System Works Fine
Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
Note: 429328.1 - Application Server Status Always Shown as Down in OAM
Regards,
Hussein

Java Front-end problems with Windows 200 Pro

Hi,
I have some problem on my pc with java applications front-end. I have windows 2000 Professional and use java(TM) 2 SDK, Standard Edition Version 1.3.1
Using every java applications (also development environment as JBuilder 4 Professional and Together 4) I have always problems with front-end: the text is bad visualized everytime I use the scroolbar, menu items into a menu are bad visualized while I drag over of them the mouse and so on...
To try to solve this my problem I have just installed Service Pack 2 for Windows 2000 Pro but I have not had good results - I keep to have the usual problem.
I'm aware that it is difficult to reproduce and however if anyone has some idea to solve my problem I am opened to every suggestion.
Thanks in advance

the text says that what technolody that they are using its called "Off Screen Images" once i used them in my applications to improve the prefomance.
What they says is to improve the time it takes to display componants that display text on them (Such as buttons, Labels...) they going to create an Off Screen Image of the text and then paste that image on to the screen whenever the componant has to be displayed/Re displayed instead of redrowing (Re rendering) the text on the screen repeatedly which take more time and processing power than rendering once and paste it to screen whenever needed but this solution will take some more memory.

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Problem in Front end with BW3.5

hi friends,
now I am using BI 7.0 with front end BW3.5, it looks good. when i open the BEx, it didnot work...I think there is a component missing... If i use BI 7.0 as front end, I know that will be work.... I want to call BEx from citrix environment.... how can i find what component is missing, and how can we solve this problem...
I want to get solution with BW 3.5 front end... please guide and help me....
with hopes,
Jaya
Edited by: jaya durai on Jul 24, 2008 3:41 PM

In the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb

BI Front end Bex analyser problem.

Hi ,
I couldn't able to open bex analyzer in BI 7.0.
My basis team has followed all steps,but i couldn't able to open BEX tool bar in BI 7.0.
I can able to create query in BI 7.0 .
Kindly suggest me .
thanks,
Vijay.

Hi Vijay,
The scenerio refers to GUI or Installation problems.
I suggest you to go through with these following SAP Notes:
1025122
1050605
also check your Front End installation as per Note 197460.
Regards
Vivek Tripathi

Lync front end connectivity test fails (SSL certificate / URL problem)

We have a weird problem in our installation where Lync keeps complaining about connectivity issues to external reach proxy on our front end server.
The event log error codes are 41024 and 41026.
Here's the error from the snooper utility:
TL_ERROR(TF_COMPONENT) [0]1A14.0EE4::12/12/2014-10:31:30.901.0000000d (DataMCURunTime,DataProxies.ProcessResponse:1197.idx(601))
(0000000001595A27)Failed poking Proxy error=[The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.], type=[ExternalReachProxy], url=[https://dunords36.du.local:4443/Reach/DataCollaborationRelayWebService.svc]
The problem is that it makes the test with the INTERNAL FQDN (dunords36.du.local) and thus the SSL trust fails as the certificate is for our EXTERNAL FQDN on the front end server! I have verified this by testing the above URL with the external address and
the internal one. With the external one the certificate is OK.
If you're wondering; we do not use a reverse proxy. Instead we just have the firewall change the port and forward the traffic to our front end server. Our lync setup is a NAT'ed setup.
I know about the security risks so this is not what the discussion is about.
I can't find anywhere where i can change the above behaviour and tell lync to make the test on the correct, external FQDN. The settings in the topology builder all seems to be OK. And as you can see it does make the test on port 4443 which in our topology
builder is configured for our external FQDN.

Hi,
Would you please elaborate your Lync Server environment (Standard Edition or Enterprise Edition)?
Please double check if you enter the correct external base URL on Lync Topology.
Please also check if the SAN of FE Server certificate correctly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

720 GUI causing a problem in Front End editor?

Hi all,
We recently upgraded our GUI to 720 patch level 3. Now I am finding that when I am in the ABAP New Front End editor I am having a problem with the Code Hint feature. I used to be able to hit ENTERr when a STATEMENT was proposed to accept it but that doesn't work anymore. Has anyone else encountered this issue? I have read the documentation on the Code Hint feature and reviewed all my settings. I did learn from the documentation that you can also hit TAB to accept the proposed syntax. I tried that and hitting TAB works. Did they remove the hitting ENTER? Just checking before I log this was SAP.
Any info is appreciated.
Thanks.

Hi Mark,
Yes, this feature is not available in the new GUI. We need to hit the TAB Button to achieve this.
Thanks,
Guru

New front end editor problem

I'm quite new on this forum, so don't be so angry if I'm asking about something that someone else was asking for, by i didn't found answer on my question.
So...
In my company, administrator made some updates in 4.7, after that updates new front end editor is avalible (this with code colorin, code hinting, code folding etc).
But I have some problem with keyboard mapping scheme. When i try to save my own setting or change keymapping to another one, SAP stop responding (it's not a crash with short dump but simple aplication freezing). I tried to find some solution to this behaviour but I didn't found it yet.
My question is:
1) Did someone else have the same behaviour as I?
2) Where to find SAP notes about front end editor?
Thx in advance for any help

Keymapping settings in file:
C:\Documents and Settings\<username>\ab4_data\keymap.xml
You should also check the following dir:
c:\Program Files\SAP\FrontEnd\SapGui\ab4_data\
During patch installation this dir is overwritten, and during the first use of the new editor, the files from here copied to the <username>\ab4_data dir, where you can change them.
Might be permission problem, I can imagine, that if you have no authorization to change these files, the GUI starts hanging or chrashing.
Peter

Problem in data carrier "IDENTIFY FRONT END COMPUTER"

hello all
i am facing problem in data carrier creation for front end computer. actually i am creating data carrier type PC and i want set as default for all desktop. After DEFINE DATA CARRIER TYPE SERVER, FRONT END and Select PC and IDENTIFY FRONT END COMPUTER its shows following error
No entries found that match selection criteria
Message no. SV004
Diagnosis
No entries were found when importing data from the data base.
Procedure
If you have specified selection conditions, start the transaction again with conditions that are less restricted.
You can make new entries independently of this. To do this, select the function New entries in menu Edit.
help me

Hi Vivek,
In the SAP standard this entry are maintained only by the system
itself and they cannot be entered manually in transaction DC20. I can
only provide you the following information on the possible settings for
variable HOSTNAME and the DEFAULT frontend entry.
1. Default entry
   Call transaction 'DC20'. Double-click node 'Define data carrier type
   "server, front end"'. Select the respective data carrier type (e.g.
   'PC') and double-click node 'Identify frontend computers'. Click
   button 'Default entry' in the top right corner of the table control.
   Note that it is only possible to create 1 default entry!
2. System variable HOSTNAME
   If you run Windows XP, please go to Start -> Settings -> Control
   Panel. Double-click on 'System'. Click on tab 'Advanced' and then on
   button 'Environment variables'. Create system variable 'hostname' and
   assign a value'. Save the new variable.
As there is already a DEFAULT entry for frontendtype 'PC' it cannot be
maintained for another frontend type.
Best regards,
Christoph

Problem with CRM 2011 web front end cluster

Hi.
We have a CRM 2011 (RU17) environment with a SQL DB server and 2 web front end CRM server in a cluster.
Since few days (about 10) it seems that one of the 2 nodes is not working, and since yesterday many users report access problems when calling the application by cluster name - as usual since we deployed CRM 1 year ago.
I tried myself, and I can run the application by cluster name without problems. If it try the separate notes addresses, one of them works, the other doesn't.
I checked the 2 web front end servers, and are (or seem) both properly configured, with all patches installed.
Following the information I got from Event viewer. Any suggestion welcomed!
Many thanks and Best regards
On the 'faulty' server I have different errors at event viewer level:
Faulting application name: Microsoft.Crm.Sandbox.HostService.exe, version: 5.0.9690.4150, time stamp: 0x53559982
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677
Exception code: 0xe0434352
Fault offset: 0x000000000000940d
Faulting process id: 0x6f8
Faulting application start time: 0x01cf8f93aa9a7ff8
Faulting application path: C:\PROGRA~1\MICROS~4\Server\bin\Microsoft.Crm.Sandbox.HostService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: f5019a68-fb86-11e3-9f21-005056853970
Application: Microsoft.Crm.Sandbox.HostService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
The Sandbox Host service has encountered an unexpected error and has stopped.
Source: Microsoft.Crm.Sandbox.HostService.exe (1784)
Error: System.Runtime.InteropServices.COMException (0x8007203A): The server is not operational.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.Crm.SecurityUtils.GetSidFromAD(Guid objectGuid)
   at Microsoft.Crm.Sandbox.SandboxHost.SetPrivilegeUserGroupId(Guid privilegeUserGroupId)
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(Object stateInfo)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
On the 'running' server event viewer I only have one error, related to mail router:
#23379 - Could not verify the version of Microsoft Dynamics CRM at http://alkcg106.d30.intra:5555/AkzoNobelIndustrialCoatings. There was no endpoint listening at http://alkcg106:5555/AkzoNobelIndustrialCoatings/XRMServices/2011/Organization.svc that could
accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.

Apologize for not having indicated here the resolotion I got thanks to MS support...
We enabled the trace and we got
a http error page stating maxQueryStringLength was insufficient. We changed the maxQueryStringLength and QueryString values in the CRM web.config value to 10240.
We also noticed an error related to the DC being unavailable. We checked in the CRM registry hive and see in the non-working server you had a PreferredDc key pointing to “AMDNAD”. On pinging
AMDNAD we see it is not reachable. We removed the PreferredDc key and after iisreset we can navigate to crm.

SAPGUI 7.10 New ABAP Front End Editor Problem with CTRL + 5

Hi Guys,
I am using SAPGUI 7.10 patch 19 with new front-end editor and I am not able to use CTRL + 5 (on Numeric pad) to select whole program. As soon as I change the editor to use old front end editor I am able to use CTRL + 5.
Please help me to incorporate CTRL + 5 in New frond end editor.
Thanks,

Try <ctrl>+a
Regards, Uwe

BEx front end version problem

Hai everybody,
I am trying to edit an existing query. When I open the query designer( from excel sheet) I am getting the following error message is appearing.
The component was edited with a more recent version of the editor. You also have to use the more recent version further. Further processing not possible. Update your fron end"
There is only "ok" and when I clik on ok, the designer closes.
What does this mean? Is it taking about BW version or what is it? I have it edit the query but its not letting me to. Any help is highly appreciated.
Thank you very much.

Hi Visu,
somebody has developed the Query you are trying to modify with a newer Front End Version. So you need to have the same or higher Release / Patch Level.
To download Patched go through:
http://service.sap.com/swdc -> Download -> Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> ...
Hope it helps
GFV

Problem using the Web front end

Hi
I have been playing with the Web publishing tool and I can get it working fine until I build an executable file. Then when the vi is loaded using the .exe file the web front end comes up with the comment vi not loaded into memory?
I am obviously doing something wrong but up until now I can not see it?
Any suggestinos welcome.
Cheerrs
Phill

Phill,
Have a look at this KnowledgeBase article:
http://digital.ni.com/public.nsf/websearch/862567530005F09C8025673000529121?OpenDocument
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Front end problem

Similar Messages

Maybe you are looking for