Front panel audio wont mute rear audio when headphones are in.

Hello,
As the title says my sound isn't muted on the rear speakers when I plug in my headphones. The front panel audio didn't work at first, it said in the manual to disable front panel jack detection. Once I did this the audio came through the front panel, but is not muted at the rear, so I have sound from both the headphones that are plugged into the front and the speakers that are in the rear. The option to mute the rear output when headphones are plugged in is enabled, the speakers are plugged into the green jack, the rear speakers are set to stereo line out and the front is set to headphones.
Can anyone help, at the moment I have to keep unplugging the speakers to listen through the headphones without disturbing anyone else, which with the placement of my computer is not convenient.

Hello,
I have used the link, but the drivers just install the same one I already had (both the rar and the exe do this), even if I remove the previous drivers via programs and features. Unfortunately the problem still persists, I am really stumped as to what is causing it. I am not sure if I have AC'97 or HD Audio connectors on the front of the case, as the case came with absolutely no documentation. I have provided a link to the manufacturers website if that could help in anyway.
http://www.xionusa.com/Product-case-Xion2.asp

Similar Messages

My ipod has itunes sync symbols up on front screen,it wont turn on and when i go to sync it to computer recovery mode is coming up? Can you help?

my ipod has itunes sync symbols up on front screen,it wont turn on and when i go to sync it to computer recovery mode is coming up? Can you help?

Connect the iOS device to your computer and restore via iTunes. The iPod will be erased. Place the iOS device in DFU mode. if necessary to allow the restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

My ipod 5th gen won't change volume when headphones are plugged in, but when they are not I can change the volume on the speaker. How do I fix this?

My ipod 5th gen won't let me adjust volume when headphones are plugged in, but when they are not I can adjust the volume on the speaker. How do I fix this?

Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
B-rock

IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
This is what happens:
When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
I have also restored the device in itunes, with no luck.....
Thanks in advance for any useful answer!

Thanks for your answer...
The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

IPhone 4 soundis very low when headphones are used

my iPhone volume is extremely low when i plug headphones in when listening to Netflix, Pandora, etc. When i unplug the headphones, the volume is normal when coming from the speakers in the phone- this only happens when we use headphones. We took the phone to the Apple store yesterday and they completely replaced the phone with a new one- and the new one is doing the same thing- you can barely hear anything when headphones are used.. all our sounds are turned all the way up- if there a way to configure the sound settings in iTunes for your iPhone???

This sounds silly but did you remove the plastic tabs covering each ear plug?
If so then read here : http://support.apple.com/kb/TS2802
Good Luck

890GXM-G65 front panel - AC' 97 or HD audio?

Hello, folks. I bought an 890GXM-G65 and I am having a doubt regarding the installation. The audio connector from the front panel splits in two. One connector reads “AC’ 97” and the other “HD Audio”. My motherboard manual says nothing about which one should I use to plug into the JAUD1.
I have been researching and looks like AC’ 97 is from AMD boards and HD audio is from Intel boards. Is that correct? Should then I use the connector AC’ 97?
I appreciate any help!
Cheers,

Quote from: Stu on 07-November-10, 22:34:34
Ujee,
Please keep discussion of your problem in your own thread, don't hijack others.
Oh my bad. Never thought it was called a "hijack". I'm sorry for this.

Front panel of a vi pops up when i start my top level vi how can i stop this

i have a vi that whos front panel should display when the user clicks a front panel button(test instructions),
however this vi pops up when i run the top level vi. I can manually close the vi, but how do i stop this?
i tried modifying the Sub VI Set up properties, but that doesnt work.
Solved!
Go to Solution.

Hi jknapp,
As egraham has pointed out, you can customize the window appearance of your sub VI from the VI Properties. If you go to File » VI Properties, then under Category select Window Appearance and then Customize..., you should be able to control how the sub VI appears. Hope this helps!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Hi. I want to build a GUI based on several windows appearing following a certain sequence. How can i create different windows in the same VI? Also, i want the front panel of a subvi to appear when i run, how can i enable this.Thanks

Having several windows appear ...

Hi,
You can't create several windows for one VI. But you can use the "Tab Control" and change tab's in the program. Or you can use sub VI's and show ther front panels.
To show the front panel of a sub VI you have to open the VI you want to show and select "File->VI Properties". In the VI Properties window select Category "Window Appearance" and click Customize...
In the Customize Window Appearence window, here you can set a number of attributes for how the window will appear, select "Show front panel when called" and "Close afterwards if originally closed" click OK and OK and save the VI, done.
Now the VI front panel will appear then you use it as a sub VI.
/Thomas

X-Fi when Headphones are in, cannot hear speakers!

In the Creative Console Launcher, under Speakers and Headphones, I set it to 2/2. Speakers, but it still ONLY plays out of the headphones if the headphones are plugged in. Is there some setting I missed that will allow me to get audio out of both my speakers and headphones simultaneously? If not, I'm afraid I'll have to return this device since I can't easily reach it to constantly plug and unplug wires!!!

I guess I'm having very bad luck with this! None of the programs from the SB X-Fi disc which installed have an Uninstall option in the Start menu, or in their respecti've folders in Program Files under Creative. I also checked Add/Remove Programs, and they did not make it on that list either. I finally went into Control Panel to Sound and Audio Devices, Hardware, selected SB X-Fi Surround 5./Properties, Driver, Uninstall. This has got to be one of the WORST programs I have ever used! So I restarted my computer after uninstalling the drivers, but kept the X-Fi card plugged in. Windows recognized it immediately and said the drivers were already installed... Well I know they aren't so I popped in the disc with the drivers [again] and proceeded to reinstall them. This time it froze at 5% and then give me a slew of errors, probably because it did not uninstall correctly - which I had no way of uninstalling. Honestly, the worst product I have ever used in my life! Had to restart my computer [again]. I am trying one last thing and if that does not work, I'm returning this product... I got the latest driver off of Creatives' website for this product and am attempting to install that. If that does not work, then I will never use another Creative product again, nor recommend them to anyone!
Oh yeah, I tried downloading those unofficial files, but they took me to a RapidShare rip-off that wanted me to wait for 30-minutes for each file, and when I waited and clicked the link, it took me to another link, which took me to another link, which took me back to the first [expleti've] page to start downloading the file again... Unbelievable.

Speakers only play when headphones are plugged in.

My internal speakers only play when the headphones are plugged in. (System preferences-Sound tells me I'm using Internal Speakers, audio port for sound input). When I remove the headphones, the red light in the jack goes on and the computer says I'm using Digital Out ("The selected device has no output controls.)
I have read many community responses, most saying that the switch inside the headphone jack hasn't engaged, that I should fiddle with it using a paperclip/bobbypin/toothpick or just plug-in and unplug headphones repeatedly. I have repeatedly both of these to no avail. When fiddling, I don't really know which bump inside there is the switch, I've played with them all.
No, it's not dirty, I've blowin air, vaccuumed, dusted. Same problem.
I do use my speakers often for work and pleasure, go between different external speakers and a projector.
It seems that the computer has things backwards- headphones unplugged is pluged and vice versa.
Any suggestions or clear guidance as to what I should be fiddling with when I stick a bobby pin in there? No need to refer me to old posts, I've read them.
Thanks in advance,
TheKip

If your phone is still under warranty, Apple will service your phone for free.
Did you check the headphone port for any kind of debris or lint?
Did you already try another set of headphones? Are you suing the headphones that came with the phone?
Is the headphone jack plugged in fully into the headphone port?

Volume changes when headphone are plugged, but not when they are unplugged.

Hi!
Recently I been having an issue with my Macbook Pro 13.
When I connect my headphones to the MBP, the volume changes (as it should be), but when I take them out it doesn't return to normal, it just stays where it was when the headphones were connected.
Now, if i mute my internal speakers and connect the headphones the volume changes, but when i take them off, the volume returns to mute. So the problem is when both (internal speakers and headphones) are set to different volumes.
Here's a video that shows what happens in sound control panel (it's in spanish, "Auriculares"= Headphones and "Altavoces Internos"= Internal Speakers)
http://www.youtube.com/watch?v=EdNttRFnxE8&
Does anyone else have this issue?
Thanks for your answers!
Andrés

Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
B-rock

I get no sound for YouTube or music when headphones are out. Speaker phone works fine. It appears to be software issues. Any ideas?

I have an iPhone 4s w/iOS 5.0.1. YouTube and music player do not produce sound w/out headphones being plugged in. The speaker phone and other phone sounds continue to work properly. The volume buttons on the side of the phone do not control volume unless the headphones are plugged in. When you go to 'settings' then 'sounds' and make sure 'change with buttons' is selected, the volume bar will not move with the buttons until I make the volume change on the bar with my finger - then the buttons control the volume bar (but still no sound for YouTube or the music player without the headphones). It appears to be some type of software issue. I have read the post about theap home thinking the headphones are still plugged in, but that would not explain why some sound works and others do not. Any ideas?

Hello tiffay8,
Thanks for using Apple Support Communities.
From your post I understand you're not getting any audio output from your speakers when you're playing games. Follow the steps below to resolve the issue:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

Turn off Iphone 4 ringer when headphones are in.

When speakers or headphones are plugged into the jack, the ringer still rings through. I have seen a couple of posts on turning the ringer off, but they seem to only be work-arounds such as forwarding the phone. Is it actually possible to turn the ringer off while something is plugged into the jack? If so, how do I do this?

The only way to do this would be to flip the mute switch on the side to silent. This is by design. So you don't miss a call if you take the headphones off for a moment or two.

IPod does not turn back on when headphones are plugged in.

Hi all,
In my previous iPod, it would automatically pause a song when the headphones are removed and if the iPod is off, it would automatically turn the iPod on once I inserted the headphone jack.
My 4G iPod for some reason does not turn the iPod on automatically when I insert the headphone jack. Is this normal or is there some setting that I need to change to accomodate this?
Thanks for any help,
Ed

Yep, the problem seems to appear when the iPod has been left to sit for an hour or so. Unplugging the headphone jack will pause the song and after a while the display will cut off. Plugging the jack back in does not turn the iPod back on, however hitting the menu button will turn it on where it was last left.
I could have sworn my previous iPod didn't behave this way; it would come back on when the jack was plugged in.
Ed

Front panel audio wont mute rear audio when headphones are in.

Similar Messages

Maybe you are looking for