Front Panel Buttons Does Not Work With scanjet 7650 using Windows 8.1

I am unable to use scan doctor and my front buttons since I moved to Windows 8.1 using the above scanner.

Hi m_heistand.
Please verify that the MF8580 is registered in the MF Network Scan Utility by following the instructions below:
Open the system tray in the bottom-right corner of the desktop and click the blue scanner icon.
Next, select the check box for the MF8500 series, and then click [OK].
Place the machine in [Remote Scanner] mode and scan a document using the MF Toolbox.
If you are still unable to scan after the machine is registered in the scan utility, we recommend that you contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

HT1349 my iphone 4s does not sync with my laptop using WINDOWS XP

my iphone 4s does not sync with my laptop using WINDOWS XP
As a matter of fact it does not show as deivce under my laptop
Additionally Itunes gets hang when i connect my iphone to the laptop
any reasons- please help

sgnfromek wrote:
As a matter of fact it does not show as deivce under my laptop
Of course not... it's not supposed to. There is no issue with that.
iDevices only show as cameras so that pictures/videos taken with the device can be copied off.
What troubleshooting has been tried to get iTunes to recognize the device?
Different sync cable?
Multiple USB ports?
Reset or restart or the device?
Rebooting the computer?

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

MDT - Custom Reference Image does not work with Task Sequence, normal Windows 7 Enterprise Iso media works fine.

Hi,
Our MDT server is acting strange!
I have previously had this system running without problem - i could both capture and deploy computers as is and no changes have been made to mdt.
But my latest capture does not work. When i capture my reference maching in my VM environment it completes without errors and i can import the latest wim file.
When i deploy the tast sequence, it install the custom Wim image, but it ends up with "login" screen as the administrator i have entered for the capture/deploy sequence, but it goes to stop at this point and applications is not installed.
If i change the ISO in the task sequence under Install OS step, to a clean Win7 install media then the capture completes and install applications.
I have also tried to:
Capture reference without password
Capture reference without Windows updates
Customsettings.ini, bootstrap, BDD.log and SMSTS.log to be found here: https://onedrive.live.com/redir?resid=ED5029A20300B814!365&authkey=!AALV1b2ubD0laEE&ithint=folder%2cini
Hope you will be able to assist,
Regards,
Anders

if you have noticed your smsts.log, there is same error multiple -
Executing in non SMS standalone mode. Ignoring send a task execution status message request
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
User did not specify local data drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume A:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume D:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume X:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume Z:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
TSM root drive = TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
We do not find an available volume to store the local data path
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Save the current environment block TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save environment to (80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to persist execution state. Error 0x(80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save execution state and environment to local hard disk
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Start executing an instruciton. Instruction name: Gather local only. Instruction pointer: 1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSCurrentActionName=Gather local only
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
what about the mass storage driver in your boot image, is it updated?
Md.Waseem Please remember to click “Mark as Answer” on the post that helps you. Thank you.

Back button does not work with some web sites to return me back too Firefox main page after concluding business on site.

After connecting to a web site and completing tasks, I use back button too return too Firefox main page. After using back button to get back to the original site log in page the back button (after repeated uses) will never get me off the web page and back to the Firefox main page. At this point the only way too get back too Firefox main page is too shut down Firefox wait 60 seconds and restart Mozilla-Firefox.

Some web pages are coded to redirect you forward to another page. In that case, when you go back to the page, Firefox redirects you forward again.
To bypass this, use the history drop-down next to the back and forward buttons. The drop-down has the most recent pages on top, and older pages below. Jump as far down the list as you can, then repeat as needed to get back to the first page.
Does it work?

The Open a New Tab button does not work. I'm using Firefox 17.0 on Windows 7. Have restarted computer.

It had been working fine. Suddenly not working after no significant change to computer (that I'm aware of).

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

LV DLL in C# app. does not work with 64bitXP, 32bit7, 64bit7 windows

Thanks for taking time to read thru.
Attached is a source code for
- a simple Labview2009/2010 based DLL (child) .
- a simple Visual Studio2008 based C# container (parent) calling the above DLL
Built this DLL (child) in 32bitWindowsXP.
The container (parent) is built in 32 bit mode for x86. Hence container is succesfully launched on all 4 combinations. 32bitXP,64bitXP,32bit7,64bit7
Container is cuccessfully able to launch C# based DLLs (which are built in 32 bit mode)
When I call LabVIEW DLL (using icon on top left), following are results
With 32bitXP......DLL launches cuccessfully
With 64bitXP computer.......Application crashes
With 32bitWin7 computer...Application crashes
With 64bitwin7 computer....Application crashes
Included PPT in the attachment shows picture of crash.
Some background notes are:
Same C# application successfully launches C# based DLLs in all 4 combinations of Oss
.NET framework is 3.5, Visual Studio is 2008
Got the repeatable crashing results when installed
32bit LV run time engine on 64 bit machines
64bit LV run time engine on 64 bit machines
Got the repeatable crashing results when used LabVIEW2010.
If made EXE (instead of DLL) it works in all 4 OS combinations with 32 bit RTEs.
Looking for help
- to identify why LabVIEW DLL crashing in above situation
- to elliminate crash.
Attachments:
TestAppletContainer_.zip ‏4050 KB

Apologies if you've seen it all before, but you haven't explicitly mentioned deleting various folders before trying to reinstall.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

OK button does not work in SharePoint 2010 using any web browser

We are unable to press OK in SharePoint when trying to edit columns or create new columns. We can press cancel but when you click OK it does nothing. I receive an error message in the left corner which says 'helperFrm' is null or not an object. Maybe this
helps?
I have tried in IE8,9, 10, Firefox, Chrome but nothing. You press the button and it does nothing but show 'error on page' in the bottom left corner. Very frustrating.
Thanks in advance.
Elliot

If not, register in masterpage
<SharePoint:ScriptLink language="javascript" name="~sitecollection/custom/jquery-1.10.2.min.js" runat="server" Localizable="false" />
Instead of
~sitecollection/custom/jquery-1.10.2.min.js
this
include your bform.js

Brand new HP ENVY dv7 Notebook PC suddenly does not work with Skype. Using preinstalled Windows 8

Hi, this morning Skype worked correctly. Two hours later I can hear the other person and see it but cannot hear me, It is a brand new HP ENVY dv7 Notebook PC running on Windows 8.
Thank you.
Bernard

Hello soincabf,
I see that you are having problems with Skype on your HP computer. I would like to help with this issue but I need some information.
Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
Does the webcam work properly on Skype?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Firefox does not work with yahoo mail, why ???

for some reason firefox does not work with the new Email window on yahoo.com All the other browsers work with yahoo mail just fine!! Are you working on a fix???

''ralphieboy [[#question-1022015|said]]''
<blockquote>
for some reason firefox does not work with the new Email window on yahoo.com All the other browsers work with yahoo mail just fine!! Are you working on a fix???
</blockquote>
I have had the problem of Yahoo! mail freezing (my computer freezing) with Firefox right after I boot up my computer and sign into my Yahoo! mail account. I have to either shut down my computer or use Control + Alt and press Delete to eventually bring up the Task Manager option. Then, once the choice for Task Manager comes up, I can click on cancel and Yahoo! mail and my computer have "un-frozen." I have followed all the recommendations for updating Firefox, clearing caches, checking if an Add-On is the problem, etc., as well as all the recommendations on Yahoo! help pages. Nothing has improved the situation to date. Firefox info says the problem is with Yahoo! Yahoo! says it is a browser problem. I just want the problem to be fixed.

I just updated firefox and now when i play online games ,my home button and my login in button does not work,also my refresh button is gone. Please help me with this problem. THANKS

i updated firefox to the newest version,now my login and home button does not work,also my refresh button dissapeared. I play alot of games and need those buttons to switch back and forth to other games. THANKS

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

I have a ipod 2nd gen it is full cannot delete,the sync button does not work,says use cd that came with ipod

ihave a ipod 2nd gen it is full cannot delete,the sync button does not work,says not used anymore,says use a cd that came with,,also cannot download itunes store,it says ios is out dated

If you can't copy your purchases by right clicking on it in the device list and choosing "transfer purchases", download the apps again for free: http://support.apple.com/kb/HT2519
Music can only be downloaded once.

Front Panel Buttons Does Not Work With scanjet 7650 using Windows 8.1

Similar Messages

Maybe you are looking for