Front panel connection/ Sound Blaster Live Va

Does anybody know if you can hook a Li've Value to front panel connectors. I checked the user manual and there isn't much information on pin assignments.

up...

Similar Messages

  • The frontal panel of SOUND BLASTER LIVE 5.1 works, whit Audigy 2

    They estan to me selling a frontal panel of card SOUND BLASTER LIVE 5, worked in the
    AUDIGY 2 ZS so that my AUDIGY did not bring the frontal panel.
    Please.....
    Atentamente Jose Gonzalez (Venezuela)

    not quite sure how much this goes contrary to the interest of this Forum :smileytongue: but according to this it works:
    http://www.driverheaven.net/showthre...79&page=2&pp=5
    make sure to read the whole thing
    cherio
    PHYNESSE

  • Mic2 front panel of sound blaster audigy 2 zs platinum still not worki

    anyone..... please help!!!
    I have a sound blaster audigy 2 zs platinum, everything is hooked up perfectly including all power cable, and connectors to the front dri've bay. I have a samson q7 microphone that is connected using xlr female to /4" plug to the mic2 jack but I got no input signal. I then tried also using just a /4" to /8" to the back mic port of the PCI, no signal either. My friend said this mic doesn't need any other power like a phantom power or anything
    can you please help me!
    X

    If you're using a dynamic microphone, the Audigy 2 ZS dri've bay has a jumper which you can change for it to support dynamic microphones instead of electret microphones. However once this is done you won't be able to use electret mics until you've changed the jumper setting back.

  • Sound Blaster Live! 5.1 Digital and a Front Pa

    Hi everybody,
    im from german and i have a little Problem ^^
    I have a nice SoundBlaster 5.
    [img"]http://www.theglow.de/sound/soundkarte.jpg" width="400" height="300">
    My new Case has at the Front an Audio out and a Mic in port.
    [img"]http://www.theglow.de/sound/frontpanel.jpg" width="400" height="300">
    My Problem is to connecvt the panel so that i can use the ports.
    I dunno where to Connect the Cables:
    [img"]http://www.theglow.de/sound/kabel_front.jpg" width="400" height="300">
    Have i to connect them to the SoundCard? If yes, where there?
    [img"]http://www.theglow.de/sound/connectors.jpg" width="400" height="300">
    Or have i connect them to the mainboard? There are some connectors, but i dont know
    wich one belongs to the other and also not if it makes any sense, beacuase i dont use
    the onboard sound.
    [img"]http://www.theglow.de/sound/mainboard.jpg" width="400" height="300">
    Would be nice if anyone knows help. I have a 775DUAL VSTA Mainboard from ASrock.
    Greetings
    JanMessage Edited by schwix on 03-20-20070:35 AM
    Message Edited by schwix on 03-20-20070:35 AM

    The front panel connections you want to use are adapted to be connected to a motherboard with audio included, NOT to a PCI audio card. You'll have to connect the front panel wires to your motherboard's audio connnector.
    Greetings.
    El At?n

  • Front I/0 panel on Sound Blaster Audigy 2 Platinum ZS not fo

    The front I/0 panel on Sound Blaster Audigy 2 Platinum ZS not found by Creative Volume Control Application. Under recording sources, I can only choose from "What you hear", MIDI Synth, S/PDIF-In, CD Digital, Analog Mix (Line/CD/Aux/TAD/PC), Microphone and Wave. The option to record from anything on the front panel, (Aux-in 2, Line-in/Mic-in 2) have disappeared. I have tried re-installing the software from scratch, just installing Creative Update components and even formatting the hard-dri've and re-loading Windows but it still doesn't work!!?Does anybody have any helpful suggestions on this frustrating matter?

    If you're using a dynamic microphone, the Audigy 2 ZS dri've bay has a jumper which you can change for it to support dynamic microphones instead of electret microphones. However once this is done you won't be able to use electret mics until you've changed the jumper setting back.

  • Creative Sound Blaster Live 5.1 Digital and Vi

    Hi, I have Creative Sound Blaster Li've 5. Digital in my computer. I recently clean installed Windows Vista. Everything went fine, its been few months now everything was fine. But for the past few days my Vista computer is showing a blue screen on startup and will allow me to boot in Safe mode only with following error:
    <p class="clsPTitle">Download updates for Creative Sound Blaster Li've 5. Digital
    <p class="clsPTitle">?
    This problem was caused by Creative Sound Blaster Li've 5. Digital,
    which was created by Creative Technology Ltd.
    Solution
    To solve this problem, follow these steps:
    Go online to the following website:
    <img alt="[/img] src="http://wer.microsoft.com/Responses/include/images/arrow.gif">[color="#3a8e6">Creative Technology Ltd
    <
    Find SBL5DL_PCPatch_LB_3.exe, and then install it.
    <
    I downloaded above EXE file from creative web site and tried but it says File does not support Vista.
    Can anyone please Help!!!
    Idrees Adam

    The front panel connections you want to use are adapted to be connected to a motherboard with audio included, NOT to a PCI audio card. You'll have to connect the front panel wires to your motherboard's audio connnector.
    Greetings.
    El At?n

  • Sound Blaster Live! Platinum 5.1 and DTT2500 5.1

    Hello!
    I have a Sound Blaster Live! Platinum 5.1 and a Cambridge Soundworks DTT2500 5.1 Digital Sound System.
    I linked them with with the SPDIF-Out on the Live! Drive.
    First i thought it works but then i realized that there is only sound from the 2 front and the center speakers. There is no Signal on the Sorround Speakers.
    When i do the sound test in the sorround mixer, only the left and the right front speakers work.
    Do i have to link it with this 9 pin digital din cable? But i don't have such and don't know where to get.
    Can you help me?
    How do i have to link this devices?

    You may have to use the connection on the rear of the sound card...there should have had a "Y" shaped cable included with the speaker/sound card..it has a small 1/8" plug on the single end and opens to a din plug and rca type pluge on the other...try the single end in the orange input at the sound card and the other two plug in to the speaker system..sorry bout being so vaugue, i'm kinda tired..but if you need the original speaker system/ sound card owner's manuals with the installation diagrams I can get them to you.

  • How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

    How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

    First off your operating system version is obsolete and not being updated for security issues from Apple.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
    However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
    Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
    http://roaringapps.com/apps:table
    I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
    Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
    https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
    The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
    http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
    If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
    I'm afraid you'll have to do some more digging to get it to work.
    The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
    So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
    Good Luck

  • Sound Blaster Live 5.1 - SF1 damaged.

    houk
    Yesterday I've found on my SBLi've5. that subassembly signed as SF (near MID/Gameport) is corrupted (looks like burned out).. Is this little one correspond with using an eventual midi keyboard od game controller? What kind of component is that? Resistor? Or something else? If this thing is important for communication through MIDI/Gameport, and if yes - could it be repaired by changing invalid component?

    Originally Posted by dogweed
    I lost my install disk for my sound blaster live 5.1 model SBO 100 for windows 98se. I cant seem to find drivers on creative's web site that will work with my card. Any one know where I can get them.
    Here:
    http://ccftp.creative.com/manualdn/D...BL51_W9xME.exe
    Creative Surround Mixer (Windows 95, 98, and Millennium)
    Creative AudioHQ (Windows 95, 98, and Millennium)
    Creative Installer 1.00.07 (Windows 95, 98, and Millennium)
    here:
    http://www.vogonsdrivers.com/index.php?catid=3
    or here:
    http://www.touslesdrivers.com/index....ge=12&v_code=4
    Next time please use 'uncle google'...

  • BA7500G + Sound Blaster Live! 24-bit + Windows 2k = no sound

    Similar to the thread for Win XP, I have inherited a BA7500g speaker system, and purchased a new Sound Blaster Live! 24-bit card for my Win2k system. Cannot get the speakers to work, although the speaker test works from the BA control unit. Noticed the digital audio input cable is color coded, and I don't have the original card that matches this scheme. Could this be the problem?

    I have installed a new (not used) Soundblaster Audigy SE and BA7500G speakers and I'm running XP Pro. I'm getting no sound even when I change to Digital Out only? Not sure what to do? Is this sound card not compatible with my speakers? Do I need to purchase the Digital I/O Module that Creative is currently not in stock? I can find the Digital I/O module on Ebay if need be but not sure that's the solution. Please help!
    Thanks,
    Kevin

  • Front panel connections

    .I am building a new system but the front panel connections in thr mobo manual need clarification for me .
     Front panel connections jfp1 & jfp2
      jfp2 -- 4pin speaker wire 2-8
              3pin power led    1-5  
      jfp1--  2pin hdd led  1-3
              2pin reset sw 5-7
              2pin power sw 6-8
      In the manual it has a 2pin power led 2-4 but there is no wire do I take it that you do not need this .
      USB 2 & USB 3
      4 pin connector vcc , usb- , usb+, gnd 2-8 or 1-7
      this cable has an extra gnd wire I would imagine you just leave this unconnected as there is no 9pin & 10 is usboc .
     Front audio
     pins 5-6 & 9-10 not to be used .
     So that leaves me with 5 connections but manual does not say where they connect .
      ear left
      ear right
      mic vcc
      mic in
      grd
     Hope I have explaine myself ok but woulsd rather be suree before I go any further , I have the rest of the pc in place .
      Regards Ian

    Found these on an other site much more explicit than manual . There was connection diagram on manual but no direction as to + or - so would imagine 1for example is hd led p for positive .
    PIN SIGNAL DESCRIPTION
    1 HD_LED_P Hard disk LED pull-up
    2 FP PWR/SLP MSG LED pull-up
    3 HD_LED_N Hard disk active LED
    4 FP PWR/SLP MSG LED pull-up
    5 RST_SW_N Reset Switch low reference pull-down to GND
    6 PWR_SW_P Power Switch high reference pull-up
    7 RST_SW_P Reset Switch high reference pull-up
    8 PWR_SW_N Power Switch low reference pull-down to GND
    9 RSVD_DNU Reserved. Do not use.
    JFP1 Pin Definition
    PIN SIGNAL PIN SIGNAL
    1 GND 2 SPK-
    3 SLED 4 BUZ+
    5 PLED 6 BUZ-
    7 NC 8 SPK+
    JFP2 Pin Definition
    PIN SIGNAL DESCRIPTION
    1 AUD_MIC Front panel microphone input signal
    2 AUD_GND Ground used by analog audio circuits
    3 AUD_MIC_BIAS Microphone power
    4 AUD_VCC Filtered +5V used by analog audio circuits
    5 AUD_FPOUT_R Right channel audio signal to front panel                JUMPERED
    6 AUD_RET_R Right channel audio signal return from front panel      JUMPERED
    7 HP_ON Reserved for future use to control headphone amplifier
    8 KEY No pin                                                                                 NO PIN
    9 AUD_FPOUT_L Left channel audio signal to front panel                   JUMPERED
    10 AUD_RET_L Left channel audio signal return from front panel       JUMPERED
     So I have 5 wires left
                     ear right        ?
                     ear left          ?
                      mic vcc       pin4 ?
                      mic in         pin1 ?
                      grd             pin2 ?
      Sorry if I am dragging this out but waiting on graph card to come so just making sure everything is ok as you guys do a great service .
       Ian

  • CREATIVE SOUND BLASTER LIVE 5 voice dist

    I have a CREATIVE SOUND BLASTER LIVE 5, I want to know if some?software of Creative labs?exists to distort the voice in real time.Pablo Castillo R.
    http://pablocr.pe.kzMessage Edited by pcr_sof on 06-08-200709:48 PM
    Message Edited by pcr_sof on 06-2-200708:36 PM

    Take a look at the following thread:http://forums.creative.com/creativel...message.id=994?That is the best you can get. Did you run WindowsUpdate to get the drivers installed?If you did, just change the speaker setup to?4 speakers, then check and uncheck the?Digital Output Only checkbox to get sound back.

  • A1330n front panel connection​s - mic, headphones​, speaker

    I have a hp1330n desktop computer
    I am updating the motherboard to an ASUS p8H61-M LX plus
    The front panel connections for start, reset, hd activity, etc. all work fine when plugged into the 10-1 connector on the asus motherboard
    I am trying to figure out if / how I can connect the front panel 4 pin connector for the mic, headphone, speaker that use to be plugged into the 1AUX_IN1 connector on the old motherboard that shipped originally with the a1330n.
    There is a 4 pin speaker out connection available on the asus motherboard - +5V, GND, GND, Speaker out, but not sure if I can connect the 4 pin wire coming from the front panel - white, blue, green, red wires (with some modifications) into these available 4 pins.
    Or do I just forego this functionality after the upgrade and leave the plug dangling in the case?

    I found this, I guess it is compatible with the azalia connections: http://forum.thermaltake.com/files/audioconnector_307.jpg
    But I have one more question... looking at the end of the card, which pin is pin ? top left?

  • GDriver of Sound Blaster Live! 5.1 Digital (Model: SB0220) for Windows 7

    My Sound Blaster Live! 5. Digital cannot work after Windows 7 is installed. Is driver for Windows 7 available? If not, any alternati'ves? My multimedia speaker is Boston "Digital BA735" which is used to work with the digaital output the this sound card under Windows XP.

    Try kxproject site for driver

  • Definitive Vista Driver for Sound Blaster Live!

    Is there a "definitive" 3rd party driver solution for the Soun Blaster Live! 5. (including Dell Digital version) that enables all features including the digital out If no one agrees on a single solution can we get a list of options here. Here is what I have seen so far http://forums.creative.com/creativel...ssage.id=23567 http://forums.creative.com/creativel...scending&page= http://www.aeonity.com/david/creativ...vista-download Sound Blaster Live! - LiveDrvUni-Pack (English) KX project driver Anything else Which is best Anything new

    Download Sound Blaster CD ISO?s:
    http://hosted.filefront.com/BadBoyforum
    Creative Li've! 5. Digital Drivers:
    http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
    Message Edited by Rad-Wulf on 07-27-200709:28 PM

Maybe you are looking for