Front panel internal 1/0 drive prob

i have a sound blaster audigy 2 platinum
the card works fine, but the i/o dri've is not working...
it is properly connected and it is power supplied.
any suggestions?

HELP!!!!!!!!!!

Similar Messages

ALWAYS NOISE from my guitar with SB ExtremeGamer + Front Panel (Fatal1ty I/O Drive)

No clue where to start from – anyway here goes – i got win7 64-bit and latest SB drivers (Beta after trying the older ones).
When i connect my guitar to my front Line 2/Mic 2 there is a LOT of hiss, wizz, and stuff - i tried from the line in (sound card from the back and mic) same result - i am trying to use some guitar effects, studio software.
I will lay all the steps I did to try to get a sound or GOOD sound from both Amplitube 3 and Guitar Rig 4 ; I was able to get the sound a BIT fair from amplitube Fender ONCE (I also tried Hendrix, AMpeg,Metal,X-gear) – that was when I connected to Line2/Mic2 Front Creative panel – other than that I can NEVER EVER GET A SOUND from those software. Any help would really be appreciated.
In a nutshell I have Sound Blaster X-FI Fatal1ty (ExtremeGamer XFi Pro Edition) with the front Fatal1ty I/O Drive that has all sorts of inputs (Digital + analog):
I beg you guys help me; I was thinking of purchasing stuff like the below if my SB won't work
• Behringer USB Audio Interfaces
• M-Audio USB Audio Interfaces
• Line 6 USB Audio Interfaces
• Even considered this chinese product: http://www.ebay.com/itm/ASIO-USB-Interf ... 3a63ff5158
I just wanna jam on my pc – don’t want to use my Digitech GSP 2101 limited edition nor my Korg PX5D in my bedroom – just gonna plug my ESP Horizon or my Fender Strat and have fun.
Please help me out in either fixing this crap or just point me to a good (better cheap) solution to finish from all the fizz, hiss,biss,wissss, tsss, etc… lol that comes out of all those apps
BTW I also installed Asio4All (also used Creative Asio and the DIRECT sound) and tried ALL the inputs outputs possible; 44.1k and 48k sampling (also tried that); messed around with control panel sounds (Playback / Recording), with Sound blaster own console and control panel.
I am sooo tired of it I just wanna blow up my whole PC
Tx a lot for any help that comes my way.
KicKer

Again another test i did: (BTW it is only left channel that is working or how does it go since u have wndows record left/right; Mix FL/FR/RL/RR/FC/LFE/RC or SL/RC or SR
using CREATIVE Asio (to use my front panel line 2/mic 2 connection) i tried:
1. Windows record left
2. windows record right
there is sound but bypassed from AT or GR (Clean sound)
now when i change only left channel to: Mix FL/FR/RL/RR/FC input is MAXED and nise is crazy even without connecting anything
finally choosing:
LFE
RC or SL
RC or SR
i get the clean BYPAssed sound (input signal is zero)
i set 00 MS and ms for Asio creative latency + tried 44 and 48 hz
Asio4all:
says not connected for all - when i go to its control panel and tick any WDM device list each one shows the yellow Unavailable/Beyond Logic mark
please please please help me

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

No sound front panel audio with newest CMI 9880L driver

So basically I plugged in a headphone the other day on the front panel and noticed the audio jack randomly stopped working. They worked for about 3 years and the last changes I've made was updating the CMI 9880L driver to the newest one on the MSI website for my mainboard( 915P combo), about a month ago. So I thought the problem was the new driver, I went back to the CD that came with the board and installed the audio drivers I had before, It also didnt work!. I went to the hardware manager and clicked on the ROLL BACK driver button and it installed a microsoft driver, this time the front audio jacks DID work, this means is not a hardware problem. What is going on with the new C-MEDIA driver? what should I do to restore sound to the front jacks?
ps. I messed around with the BIOS options(switching between Azalia and AC97) and nothing happened.

Quote from: ivon on 26-September-06, 21:14:20
I am quite confused... would appreciate your help.
Well, so was I. A good explanation can be found at
http://www.intel.com/support/motherboards/desktop/sb/cs-015851.htm
The point is, that the same output can be used either for AC-97 front panel audio (what you have on your chassis) or for High Definition Audio (which I've never seen). The board seems to differentiate between these two by means of the PIN #4 (Presence), which you just leave disconnected in your case.
Microphone should use PINs 1, 2 and 3:
1 - Mic In, 2 - Ground, 3 - Mic Power
Audio output should use PINs 5, 6, 9 and 10:
5 - R-Out, 6 - R-RET, 9 - L-Out, 10 - L-RET.
After you'll have connected the PINs to the audio connectors, do not forget to turn off the jack detection in the "Realtek HD Audio Manager" as I described before.

Internal connectors, front panel audio cennector (10-1 pin AA

i have a Creative Sound Blaster Audigy 2 ZS, and i want to connect me front panel audio connecters to me soundbord, how to do that. i have tryed to download the online manual, but it is corrupt/error so no help there.
can some one help me
question 2, do some one have a manual for Creative Sound Blaster Audigy 2 ZS, or can link one thats work?
Med venlig hilsen / Mit freundlichen Gr?en / Best regards
Allan

Quote from: [LT]Eternalbliss on 21-June-08, 03:43:49
I've just recently had this similar problem. I think the issue in your case is step 3. I believe you should connect the Azalia 10pin wire to your X-fi card, not the mobo.
My problem was that i had connected AC97 10pin wire to my X-fi, after which plugging in my headphones didn't mute my speakers.
That was the problem - works great now! Thanks

ZIP DRIVE swap FRONT PANEL Card reader, USB, Firewire, Audio, etc...

I have a G4/APG Sawtooth.
Has anyone installed any kind of card reader or USB/Firewire panel in the ZIP Drive slot?
If so, how did you alter the bezel?
thx
MacMini, TiBook, G4 AGP, iMacs & SE Mac OS X (10.4.6) that SE just won't die...

"What about buying a PCI card like the Sonnet Tango (http://www.sonnettech.com/product/tango_2.html) and then getting a generic PC hub to mount in the bay and plug into the Sonnett card?"
That's what I did.
It works fine except for one thing.
I can't use Option-boot. My mouse clicks don't get recognized correctly when I try to select a boot drive.
I'm pretty sure it's the hub. It has an NEC chipset according to ASP.

Front Panel connector for JAUD1 on K9A2 Platinum mobo

I bought some headphones for my computer and they work well when plugged into the line out and mic on the back. It's a pain unplugging my speakers in the back and plugging in the headphones, then switching back when I want my speakers again.
I noticed there is an internal JAUD1 connector which suggests that I can attach a front panel audio device to it. Where can I get such a device and what is it called ( I can look on New Egg if I know what to look for ) ? Does MSI sell one ? Does it attach in front into one of my drive bays ( I have lots of them in a Lian Li case ) ? If I have the device attached and plug my headphones into it, can I listen to audio through my headphones without having to unplug my speakers ?

Quote from: eldiener on 06-January-11, 01:23:43
My case is about 10 years old I believe. It is a Lian Li PC-70USB Full Tower ATX Case and it still is excellent. But it did not come with a front panel audio connector. Is it possible to buy one anywhere which can fit into a drive bay and which connects to the JAUD1 on the K9A2 ? I will search New Egg for "front panel audio connector", and I will ask Lian Li if perhaps they have one for older cases.
You can buy a new soundcard that comes with some front panel bay too ,though is much more expensive than a simple new case.
If you managed 10 years without a front jack why would you want it now ?!
Buy some USB headshones ,if there is a front USB connector ,maybe you get even better sound quality.
The sound on the Platnium is not so great anyway ,i ve turned it off in the first 2 months of usage to use either X-FI either D1 which are much better sound wise.

Z87-G43 Board Front panel USB Problem

I have installed the board and windows 7 64bit
Updated the Bios and checked everything I could. I do NOT get the connect tones from anything I connect to the front panel USB ports. I have used 2 (KNOWN GOOD, works on other machines) connector sets with 2 ports each, and ALL of the ports have the same symptoms. All of the usb devices have the connect tones when inserted to any of the rear ports. I have not tried the USB3 port for the front because I do not have the wiring and related header connector. My phone, (Samsung GS4) when connected to the rear ports always opens an explorer window showing the Ext SDCard and the Internal memory. when I connect to any of the front panel ports, no sound, no pop-up of explorer, but I do see the device when I manually open explorer and can open the connection manually.
I am at a loss as to what is not right and how I can make it work correctly. If anyone can give me any information to correct this, I'd be very grateful. (Tech Support was no help)
Thank you, and Aloha From Hawaii!

Thank you for your reply.
I have an older Antec Case and I have tried a brand new front panel connector I got from Frys and it acts the same Way. the only difference is that the connector is a one piece assembly that connects directly to the mobo header pins. the one in the case has individual pin connectors. both systems end up with the same scenario. When I plug in a thumb drive, there is no connect or disconnect sound and I still can manually open explorer and access the thumb drive or my phone but nothing pops up to signify any port access.BTW, I am a systems engineer and have spent the last 13 years building machines for a transportation company (bus) My previous board in the same case used the front panel connection and it worked just fine, but since the board died and was only supportive of XP I decided to upgrade to Win 7 64bit and have 16gb ram. All the rear connectors work just fine, but I need all of them so have to use the front panel connection for phone, and thumb drive access. I suspect the mobo has a design problem. The tech support person had no suggestion to correct this problem too! :<(

Audigy 2 Platinum Front Panel Probl

Hello everyone. Thank you in advance for any help.
My problem is two-fold, let me begin with the first issues.
Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

Hello everyone. Thank you in advance for any help.
My problem is two-fold, let me begin with the first issues.
Critical Issue One: On my Audigy 2 Platinum neither the headphone jack nor the Line 2 in/Mic 2 in jacks appear to be at all functional. I can get no sound to go in or come out using them. Additionally, I don't see a volume slider to control either of them in the surround mixer. Is it possible somehow that the entire front panel is disabled? I looked inside my computer and it appears to be connected firmly (the AD_EXT cable is the only one connecting my sound card to anything internally). As a side note I have already tried doing a full, clean reinstall of the drivers, to no avail.
Issue Two: I can no longer auto update my drivers using Creative's site. I believe this is somehow related to IE7, it always functioned perfectly with IE6. When I try to update now the message I get is: "Some components are corrupted." I did a search in the knowledge base and followed the instructions to fix this problem (Deleting the Acti've X controls) but this does not resolve the issue (I also noticed by searching the forums that people with similar problems never found a resolution beyond "doing a manual driver install"). I believe that the acti've x controls that I am downloading get corrupted each time. Is it possible that someone could send me, fully functional non corrupted creative acti've x controls that I could install? Or is this simply an incompatibility between the creative site and IE7?

Motherboard no rear audio when "disable front panel jack detection" not selected

I recently built this system.
Motherboard: MSI P67A-G43 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Processor: Intel Core i7-2600 Sandy Bridge 3.4GHz LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600
Memory: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL7D-8GBXH
Video Card: EVGA SuperClocked 012-P3-1572-AR GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5
HD 1: OCZ Solid 3 SLD3-25SAT3-120G 2.5" 120GB SATA III MLC
HD 2: Western Digital Caviar Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
Additional NIC: Rosewill RC-400 10/ 100/ 1000Mbps PCI V2.2, 32/64-bit, 33/66MHz Networking LAN Card
DVD: SAMSUNG Black Blu-ray Combo SATA Model SH-B123L LightScribe Support - OEM
Power Supply: OCZ ZT Series 750W Fully-Modular 80PLUS Bronze High Performance Power Supply
Case: Antec One Hundred Black Steel / Plastic ATX Mid Tower Computer Case
I also have an old Creative 4.1 speaker system (been around for about 10 years from system to system)
It worked flawlessly....until.....this morning my daughter was watching NetFlix and she plugged in the headphones. The sound muted the rears (as it is supposed to do) and sound came through the headphones (front jack) as it was supposed to do. She said some popup appeared to which she didn't read and just hit OK (doh!). Now I am unable to get any sound out of the rear speakers when unplugging the headphones. After much playing around, if I un-check "disable front panel jack detection" in the MSI Audio Manager then the sound once again works from the rear, however (as can be expected) it doesn't mute it when the headphone jack is re-plugged in. Strange, thing is that this worked before this morning. It's like it is always detecting the headphones and therefore mutes the rears.

Additional information.
I also have to set: "Separate all input jacks as independent input devices" in the MSI Audio Manager (Device advanced settings) in order to get my microphone to work too.
What the heck happended? What's wrong?
MSI, got any ideas?

Front Panel USB Power

MSI P4M900M2-L, 945GCM5, G31M-F.
Does anyone know how to solve the problem when using Internal card reader + Bluetooth device on this motheroard, the Bluetooth can function normaly but card reader can't, when only disable bluetooth then the card reader can funtion. Both devices are plug in the motherboard JUSB 1 Slot (Front Panel). When plug in a USB Flash Drive and a External Harddisk to the front panel usb at the same time, the USB Flash can work but the Extrnal Harddisk can't.
Any solution for this? Is it the JUSB slot cant produce enough power?
Thank you

The Bluetooth and Card Reader are 2 in 1 device that using a slot in Motherboard (JUSB), after login to windows, the bluetooth can function but when insert flash card the system cannot detect the card but when disable the bluetooth then the system can detect the flash card.
The Front Panel USB problem is when USB Flash Drive and External Harddisk using Front Panel USB slot, only the USB Flash can detect. (With or without card reader also same problem)
These problem seems like lack of power supply from motherboard and only allow 1 device run at the same time, although trying to change Ram, power Supply, Processor but the problem is the same. Customer claim that the card reader can run smoothly in Gigabyte and Intel motherboard, and dont know why these 3 model MSI 7255, 7267, 7345 facing the same problem.
What is the best solution to produce more or stable power or to allow these device run properly?

Open and Close Front Panel of SubVI

Hi all,
Running LabVIEW 2011 on Windows 7 x64. I am trying to get a subVI front panel to open from my main FP with the press of a button and then close with a button press in the subVI. Here is the piece from my main FP that calls the VI and opens the FP
Plots is defined in another loop and all of the loops are in a flat sequence. I did it this way because I want it to start with the first press and not stop my main loop from running. I have moved the item in the left loop around a lot so I'm not sure if I can run that in the same loop as the event or not. Either way opening the VI seems to work fine.
The problem shows up when trying to close the subVI for the SECOND time. The code is here:
As I said, the first time I open and close the VI everything works as I expect it should. I am then able to open it again but now the "blank button" doesn't function and I can't close the window or even open the block diagram to probe anything. I have been trying to figure this out for awhile, any insite would be greatly appreciated!
Thanks
Solved!
Go to Solution.

Its good that you found the bug.
This code may serve as a way for you to compare notes.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Front Panel DataSocket takes long time to connect

Hi,
I have build a very simple DataSocket application.(Front panel DS only)
I transferring data between two applications running on 2 PC's connected via a wireless network
What hapens to be is when the router is connected to internet (via ADSL modem) the connection between clieant and server is established imidiatly.
However when Modem is disconnected it takes about 1 minute to establish connection.
At both cases I am using the internal IP of the server PC (the PC datasocket server is running on)
1. I used 2 different wirless routers and result is the same
2. I used static IP addres on both client and server PC's
3. DSTP url I use is "dstp://l192.1.128.106/number" (not computer name but rather ip number)
4. datasocket server is running on one commputer. The other (client) is running under Runtime (its an "exe" file)
5.When I look at data socket server I see that "process connected" is updated immediately. BUT the front panel controls are waiting for about a minute till datasocked LED is turns green. During this time the datasocket server looks very busy.
I have to emphasis again when the router is connected to internet connection is established immediately.
My gut feeling tels me it has to do with DNS. I don't usderstand why.
Is is related to the server PC DNS?
The client PC DNS?
The router DNS?
Any help would be extremely appreciated!

Thanks again Kyle, I have followed up some of you suggestions. With some trial and error (and a fiew bucks...) the problem was solved. The way I solved it: 1. I bought a new router (Edimax BR-6424 ~$40)2. I have configured the PC the Datasocket server was running on, as with dynamic IP and obtain DNS automayicaly. The router was not connected to Modem and everything is working fine. (if you look at atached VI - "time to establish connection was about 2S. This is the VI I am running on the client PC) Alternate 2. is configure static IP BUT LEAVE DNS VALUES EMPTY. that works fine too. (2S for connection) When I used static IP with some values in DNS the time to establish conection was ~16S. Aperrantly my problem was not related to modem at all.I have made my test with one bad (or misconfigured) router (level one WBR-3406TX).The test I made with the other router (old Edimax I borowed from a friend) were with bad DNS configuration.So I got wrong impression that my problem was related to absence of modem. I am going to use the new router. But just for curiosity. Do you have any Idea what could get wrong with the old router (level one). The DNS was configured correctly. (obtain DNS automaticaly) but still when I ran the attached VI it took 16-20 S to establish connection.??? Best regards, Hazkel
Attachments:
Dataocket Example.vi ‏11 KB

Remote front panel licence?

I'm building an application that will run on a industrial computer without a monitor or keyboard. The engineers at the site need to be able to view my front panel on there office computers to monitor the line. The ideal way to do this would be to just set up a web page that will display the info and let them control the User interface without having to install any third party software (including labview).
Does each engineer need there own licence for Remote Panel and do they have to install the Real time driver if I want to use the embeded option? Basically they need to be able to flip between a few tabs and view both live data and historical data.
The only other way I can come up with is build a second .exe and give it to each engineer which will connect to the remote computer, but I'd rather not have to install anything on there computers.
Thanks for the help
Matt

Whether you use remote panels or distribute an executable, the client will have to install something. The remote panel option requires the installation of the LabVIEW run-time engine. An executable also requires the run-time engine as well as the exe itself. The run-time engine itself does not require any addtional licenses but the remote panel may. It depends on your version of LabVIEW (basic, full, pro) and how many clients will be connected at the same time.

Audigy 2 front panel: Aux-in 2 no longer wo

This is odd to me. I updated to Windows SP3 and it insisted on updating my realtek HD audio drivers which I had disabled. Upon restart they were reinitalized. I quickly turned them off, disabled, then uninstalled them.
I switched back to my Audigy 2 but my AUX-IN 2 no longer works, and no it's not muted. It's really frustrating since I have some multimedia streaming through those RCA's and I really need it.
I've tried to rip every audio driver out. I've reinstalled about 4 times. And it still doesn't work. I've tried old drivers, new drivers. No luck.
Do you think there could be some conflict inflicted by when both drivers were installed? Are there any apps to purge Realtek from my system? Does SP3 have something to do with it's? Please help!
Quick Edit: Everything else on the front panel works and the my cables are new. I bought them because I thought they were shot.
Message Edited by Spooty on 0-25-2008 02:3 PM

Thanks for the response. I've tried the program and it does work for the intended purpose; however, now I'm experiencing a new issue. Sometimes when Muvixer "kicks in" and changes the input back to my selection the computer will lock up. I'd say this occurs out of 25 times -- enough to make this a severe pain. The sound will freeze with repititous noises coming from the speakers and the computer will be completely non-responsi've. The only solution is to hard restart. I've got a fairly decent dual core rig @ 3.9ghz with a week-old reformat and clean Windows install, so I can only imagine this is an issue with the audigy.
Any suggestions?

Front panel internal 1/0 drive prob

Similar Messages

Maybe you are looking for