Front panel not aligning properly on scale print

So I've created a custom print VI with various graphics that I'd like to print on an 11x17 sheet of paper in landscape mode, but for the life of me I can't get the thing to align properly. I want the front panel to print centered with 0.1 - 0.2 inch margins all around, but instead of doing this, the front panel will sometimes print aligned to the left and top or other times to the right and top (with wrong margins always on two sides, sometimes three or four). I'm using a programmatic call to the easy print function that scales the front panel to fit on this size. However, even after making the proportions of objects on the VI 11:17 (vertical: horizontal) I still can't seem to get this thing to center properly. Any ideas of what the problem could be?

Ok, So I created a blank VI with a 1280 x 1978 frame decoration, yet the print preview in labview still doesn't seem to show the thing with proper alignment.
Looking at the picture, looks like it's aligned along the right and top of the page rather than uniformly centered. Ideally, the frame would uniformly cover all the edges around the page in the preview. I suspect this is an issue with LabVIEW and not my printer, as I can set my printer to borderless printing.
Any ideas?
Attachments:
print align.JPG ‏22 KB

Similar Messages

Simultaneously Controlling LabVIEW Remote Front Panels not working properly

We are trying to simultaneously control a Executable file from different PC as per the description given in link below:
http://www.ni.com/white-paper/4867/en
But the issue is that we are not able to view it in Web browser as in "Web Publishing tool" When we click on "Preview in Browser" it Pop up a message " Web server not started. Do you want to start it now? We Click YES. Still nothing happens.
We have exactly followed the steps given in the "white-paper/4867/en i.e. Selected "Enable web server" and VI Properties to "Reentrant execution".
In Control Panel>>Administrative Tools>> Services we found that NI Web Server is available but NI Application Server is not installed. Is this is the reason why we are not able to Preview in Browser. If yes how to install that OR any thing else we are missing?
Thanks
R.B.Chavan

Mateus23 wrote:
I'm now developing the web version in HTML 5, using web services to comunicate with my labview application.
There you go, good solution. When doing this remember that you have access to the database on the server. A structure I have found effective is to use the server DB like a dropbox that I write to, and the web server reads from.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

IPad air Smart Cover not aligning properly

Is anyone else having issues?
My nice new iPad air arrived on Tuesday, 3 days latter I received my apple Smart Cover! Why not send them together? That's another storey.
After a days use, I notice that the cover is not aligning properly, then I read online that it could be an issues with the actual iPad not the cover, anyone else having these problems?
Experienced outcomes?
Regards
Norm.

You don't have this option?
Open Settings->General->Lock/Unlock...make sure it is toggled on.
Also, try restarting the iPad then check Settings again.
When the iPad recognizes that the cover is installed that setting should appear and as I can recall, it defaults to that setting being ON. Are you using an Apple Smart Cover or a third party cover. If it's an Apple cover & that setting doesn't appear, take the cover back to the store & exchange it, there may be a problem with the magnet placement in the cover. If that doesn't fix the issue then you may have to make an appointment at a Genius Bar to have them run a diagnostic on your iPad.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

New Macbook Pro Lid not Aligned Properly

Hi all,
I received my new 2010 15" HR i7 Macbook Pro earlier this month (May) and have been very happy with it up until yesterday when I noticed that the screen lid and the rest of the body do are not aligned properly when the lid is closed. There is an offset of about 1.5mm in the left-to-righthand direction.
The computer is only weeks old and hasn't been dropped or mishandled, so I was wondering where I stand here. It's not a massive deal really, but I feel as a virtually brand new machine, this thing should be perfect. Would I be entitled to a replacement for this defect, and if so, how long would I likely be without a machine whilst I send it back etc. (it has some customisations so can't be exchanged in a retail store).
Thanks in advance

Hi chapowski and welcome to Apple Discussions!
You are asking questions here which we don't really have any way of answering. Your best bet is to contact Apple ((44) 0844 209 0611 in the UK) and let them know your problem, and ask what they can do for you.
Just FYI, Apple typically does not replace computers unless they are unable to repair them. Since it is not a stock machine, a repair would likely take less time than a replacement anyway.
Best of luck.

HP 6500 wireless ALL-in-one e709n Printer front panel not responding at all

Hi there,
I have got a HP 6500 wireless ALL-in-one e709n printer.
I have been using it with my pc with windows vista on it for nearly 2 years and it has been great.
1 month ago, the front panel of the printer stopped responding, ie, when i press any buttons, the lcd screen on the printer does not change, it always show the ink level.
The printer turns on, shows that its preparing, then goes to idle state with ink level icons on the screen.
If i try to print any documents, it works with ethernet cable connected to my pc (which i used to do it wirelessly) , the cable-connected printing function still works, but wireless printing does not work anymore.
However if i try to scan something, on the pc when i open the hp scan app, it shows that 'scanner is not available'.
Also because the front panel doesnt work, no buttons respond, i cannot scan or copy.
I have tried unplug everything and reinstall all drivers and programs.
No damage to printer or my pc, it just stopped working all the sudden.
Can any one help me out please?
cheers,
Charlie

Hi Charlie,
Try going throgh the steps listed below and check if that may help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02716803&cc=us&dlc=en&lc=en&product=3795406&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Labels are not aligned properly when printed using HP5610

Hi ,
I am trying to print Avery J8160 labels using my HP 5610 Officejet. I am using official Avery templates and have checked all printer settings, there are no issues.
Everything is fine if I use plain paper but if I use Avery label A4 sheet, the alignment goes out. It's as if the label paper is not being drawn into the printer properly. All print settings are fine. I have contacted Avery and they have no explanation. Avery infact said that there is issue of alignment with printer and contact HP for finding solution. And they said most probably its something to do with printer treating both papers differently and some kind of skidding on rollers or something else resulting into this issue.
I have just done a quick test, I removed top row of labels and then feed the sheet and everything is fine. To me somehow seems that its thickness of label sheet and somehow printer start printing before actual print area on sheet starts. While in case if paper is thin (normal paper or top row of labels removed) , everything is fine.
Any help would be great, I have already wasted many sheets of labels.
regards
Maninder

Which SQL client and Linux version are we talking about?
Assuming you are using the Oracle sqlplus client... it does not support command line editing and history using the arrow keys. For this to work you will have to install a product called Readline Wrapper. See my answer at the General Database forum:
sqlplus command line editing

Keeping front panel objects aligned on target machine

I have a simple little program that looks fine on my development station but looks like crap on the target machine.
Indicators that are aligned on the dev machine are not aligned on the target machine?
I don't get it, why does it look so bad on the target machine? Worst of all is everyone sees the target machine so it makes me look bad!
Message Edited by RTSLVU on 08-06-2008 10:42 AM
Attachments:
Dev screen.jpg ‏170 KB
Target Screen.jpg ‏219 KB

Hi RTSLVU,
These instructions worked for me:
- Open the VI front panel. Click in File > VI properties > Windows Size
- Enable: Maintain proportions of window for different monitor resolutions
- Disable: Scale all objects on front panel as the window resizes
Check if monitor resolutions are equals.
Klein
Message Edited by Klein on 08-06-2008 11:50 AM
Message Edited by Klein on 08-06-2008 11:50 AM

Content not aligning properly?

I'm Having trouble getting my content to align properly, it looks right in dreamweaver but when I put it (doesn't matter what internet browser) it is not aligned the same way it is in dreamweaver. The site is www.thecrowdedroom.ca It's pretty obvious what isn't linging up.... The nave container the page identifier and the page content
Here's my code, I've put the code for the style sheets below the source code
SOURCE CODE:
<html>
<head>
<title>crowded room - home</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link href="stylesheet1.css" rel="stylesheet" type="text/css">
</head><center>
<body>
<div id="container">
<div id="navbar" align="left">
        <ul>
            <li><a href="CRhome.html"><img src="images/home-button.jpg" alt="Home" width="75" height="23" border="0"></a></li>
            <li><a href="CRprojects.html"><img src="images/projects-button.jpg" alt="Projects" width="87" height="23" border="0"></a></li>
            <li><a href="CRinfo.html"><img src="images/rundown-button.jpg" alt="Info" width="131" height="23" border="0"></a></li>
            <li><a href="CRcontact.html"><img src="images/contact-button.jpg" alt="Contact" width="89" height="23" border="0"></a></li>
        </ul>
</div>
<div id="display">
<img src="images/home-display.jpg" width="182" height="34">
</div>
<div id="content">
Welcome to the Crowded Room<br><br>
Home of Web Developement, Media Production, and Event Planning<br>
Take a look around, check out our current and past projects
</div>
<div id="footer">
Copyright © 2009 CROWDED ROOM PRODUCTIONS. All rights reserved
</div>
<this is the container div nothing goes below it>
</div>
</body></center>
</html>
STYLE SHEETS
#container {
    background-image: url(images/CRhome.jpg);
    background-repeat: no-repeat;
    height: 800px;
    width: 800px;
    margin-top: 30;
    margin-right: auto;
    margin-left: auto;
#container #navbar ul {
    list-style-type: none;
    clip: rect(auto,auto,auto,auto);
    height: 4px;
    width: 100px;
#container #navbar ul li {
    margin-top: 6px;
#navbar {
    height: 100px;
    width: 100px;
    float: none;
    margin-top: 202px;
    margin-left: 50px;
    position: absolute;
    left: 254px;
    top: 87px;
#display {
    position: absolute;
    left: 311px;
    top: 630px;
#content {
    letter-spacing: normal;
    text-align: left;
    word-spacing: normal;
    overflow: auto;
    height: 122px;
    width: 760px;
    margin-top: 635px;
    padding-top: 20px;
    padding-right: 20px;
    padding-left: 20px;
    position: absolute;
    font-family: "Myriad Pro";
    font-size: 14px;
    font-style: normal;
    line-height: 25px;
    vertical-align: middle;
    left: 284px;
    top: 30px;
#footer {
    font-family: Georgia, "Times New Roman", Times, serif;
    font-size: 9px;
    height: 14px;
    width: 800px;
    position: absolute;
    text-align: center;
    left: 283px;
    top: 785px;
    margin-top: 30;
    margin-right: auto;
    margin-left: auto;
#contentpic {
    letter-spacing: normal;
    text-align: left;
    word-spacing: normal;
    overflow: auto;
    height: 150px;
    width: 200px;
    margin-top: 635px;
    padding-top: 20px;
    padding-right: 20px;
    padding-left: 20px;
    position: absolute;
    font-family: "Myriad Pro";
    font-size: 14px;
    font-style: normal;
    line-height: 25px;
    vertical-align: middle;
    left: 12px;
    top: 32px;
#contentwordpic {
    letter-spacing: normal;
    text-align: left;
    word-spacing: normal;
    overflow: auto;
    height: 150px;
    width: 560px;
    margin-top: 635px;
    padding-top: 20px;
    padding-right: 20px;
    padding-left: 20px;
    position: absolute;
    font-family: "Myriad Pro";
    font-size: 14px;
    font-style: normal;
    line-height: 25px;
    vertical-align: middle;
    top: 31px;
    left: 214px;

http://www.thecrowdedroom.ca
I can tell you that having no document type declaration (DTD) on the first line of your HTML docs is not a good thing and sends your page into Browser Quirks Mode.
DW   automatically applies a doc type to new pages so you may have copied & pasted this code from someplace else ??
To fix this problem, Go to File Menu > Convert > Select a Doc type that fits your coding skills. Either XHTML or HTML (transitional).
HINT: It's a good idea to use HTML heading <h1> <h2> <h3> or paragraph <p> tags around your text content for search engines to find. Heading 1 carries greater importance than heading 2 and so on...
Related Links:
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
HTML & CSS Tutorials - http://w3schools.com/
Creating your first website in DW CS4 -
http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt1.html
Good luck with your project,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

SB X-Fi Titanium Front Panel not working

Hello,
I would like to fully use the Front Panel, because I own a 5. Surround sound system blocking all the backpanel slots. The problem is, that I simply get no sound from the front panel sound output, while the microfone works just fine. Is there some kind of special option to enable it's
The FP is properly plugged into my SB X-Fi Titanium. And it's also not broken, because the FP works perfectly with my onboard soundchip (though it seems to cause crackling in my headphones, so I cannot use it for it).
... Okay now the Mic FP is not working aswell, eventhough it did when I tried it the last time. I set everything I could, like choosing Headphone Mode, enabling FrontPanel everywhere and all that. So why is it still not working?
RIG: Win XP 32bit
Asus P7p55d
Creative SB X-Fi Titanium
normal Stereo Headset
Thanks in advance for any help!

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

Audigy 2 ZS Platinum Pro Front Panel not functio

Okay, so I recently bought a new motherboard, processor and ram.
Upon installing all components, everything works just fine.
Except my Audigy 2 zs plat pro front panel.
The power light is on, but it won't recognize ANYTHING plugged in to it.
It worked just fine on my old set up, so I'm not sure what's going on.
Here's my current set up;
Asus A8n SLI Nforce4 socket 939 mobo
AMD 64 3800+ cpu
gb Corsair VS
BFG GeForce 7800 GT graphics card
Audigy 2 ZS Platinum Pro (with completely updated drivers, btw)
The mobo DOES have onboard sound, so I don't know if that would be conflicting with anything, but I can't find any problems anywhere.
Power is hooked up correctly, and all wires are, too.
Blah! Any suggestions?Message Edited by iherbie on 2-28-2005 :4 PM

iherbie,
I don't have a platinum pro, just a plain Audigy 2 ZS. So I can only offer some general troubleshooting ideas. First, check for IRQ conflicts with other cards. Second, make sure the cable from the card to the front panel is securely seated. Removing and replugging is a quick way to verify this. If you have a multi-meter, you could test the integrity of the cable. Third, removing and reseating the sound card itself, or moving it to another PCI slot would be a good idea. If that doesn't help, then I'd uninstall and reinstall the software and drivers because perhaps front panel functions weren't properly installed the first time. I'm assuming that the rear in/out jacks work, and that the Creative CD that came with your Audigy is compatible with your current version of Windows and service pack, and that you have disabled onboard sound in your BIOS.Message Edited by Katman on 0-07-2006 08:38 PM

Front panel stopped working properly on Qosmio X300/305

Greetings and thanks for reading,
I got my computer not a week ago and since then I've had some problems, mostly with blue screens when I hit the FN key. Looking into the problem, I deactivated various Toshiba services and finally found the culprit: hwsetup.exe. Running it manually crashed my computer and it still does. However, after having installed a new version of it, it seems that FN works ok now. Running hwsetup still crashes the computer though.
Any ideas what might cause this? The computer is brand new so I don't see what I might have done to cause this situation myself.
Now to the next problem: it seems that the front panel has stopped working properly, the touch keys that let you start the Dolby application, the webcam application and also turn on and off the red lights on the keyboard. When I click the touch keys, all I get is the beep-sound from the speakers, but nothing happens. I guess I must have deactivated something by mistake. Any thoughts?
I would appreciate any input immensely, folks, so please share your theories with me. It's such a fine laptop and I can hardly sleep right now because of these problems.. silly, yes, but I want everything to be perfect since I spent so much money.
Best regards,
Johan

> I am considering a re-installation of the whole OS, but if there is anything else I can do before resorting to that option I would very interested in knowing about it.
I think you should reinstall the OS using the Toshiba image because the BSOD can be related to the software and to the hardware issue.
Reinstalling the OS you could find out if this issue is caused by software fault or hardware fault.
If the reinstallation will not help you to sort out this issue then the hardware malfunction can be possible and the Toshiba technician should check it.
By the way;
> As a result of all this, my touchpad has stopped working properly. FN-F9 doesn't help. However, it's interesting to see that I can actually move the cursor with the pad during a microsecond when the computer is loading applications into the system tray during startup, then it's immediately disabled
Seems the touchpad was disabled in the Synaptics utility.
As you said the touchpad works for a short time. Why? Because the touchpad uses the default Microsoft touchpad driver until the Synaptics utility has been loaded.
Anyway, if you would reinstall the OS the touchpad issue should be solved too

Front Panel Not Scrollable

Hi Everyone,
I just started writing a program in LabView 8.5. When I first started, a scroll bar was on the right of window and a scroll bar was on th bottom of the window. After couple days, those two scroll bars disappeared. I am not able to scroll up and down the front panel to see the controls and indicators that are on the front panel. I do not know if this is a Windows problem or LabView. If I create a new VI, the scroll bars are still there. Please help me.
Thank you very much and Happy Holidays!!!
Lynniz

You may have turned them off inadvertently. Try going into the VI Properties (File->VI Properties). Go to Appearance and click the Customize button.
Make sure the options to show the scrollbar are checked. This will turn them back on.
Message Edited by Matthew Kelton on 12-28-2007 09:08 AM
Attachments:
scrollbar.png ‏18 KB

Search panel not working properly for mysql

JDev 11.1.1.3, MySql 5.1, Windows 7 x64
When you place a search panel with a table using view criteria on a page the search does not function properly.
The search criteria is developed as shown in the VO:
( (UPPER(Patients.card_number) LIKE UPPER( :pCard || '%') ) OR (UPPER(Patients.full_name) LIKE UPPER( :pName || '%') ) )
When you press the search button with a blank form - all records are returned correctly
if you put any data in the search form - it only returns the first record in the table (not related to the criteria).
if you enter a letter in the name field - it returns no records found.
Is there a workaround for this? or has someone patched this already?
Is there a place that you can configure the way the query is built based on the database type?
also if you use the history columns - you get errors saying sysdate is not valid in the query.
I noticed the same issue that has already been raised by others (the search criteria does not show in the panel) but this is merely an inconvenience as it shows when it is run).

Suganth - Umm... there are reasons why this value isn't editable in the design time once you have set it. Ever think about why JDeveloper makes the value read-only? There's also a type map that is non-changeable in the UI; can we hack that too? Unless you know the consequences of changing this (and explain them in your "solution"), you are being irresponsible in posting such a suggestion. If there are no consequences, explain that too, and tell us why the UI prevents you from making this change.
rogerappl - Hack the jpx file at your own risk. There's a very old [url http://www.oracle.com/technology/products/jdev/howtos/10g/MySql/MySQL_and_BC_HowTo.html]article on using ADF Business Components with MySQL that talks about the correct settings for these.
John
Edit.. Roger I see that you've updated the thread - when you created your business components, did you specify SQL92 flavor originally? What type map did you use?
JOhn

Front panel not aligning properly on scale print

Similar Messages

Maybe you are looking for