Front panel sound ports

Feeling quite pleased with myself because my first build is just about finished ( have a mass of cables to tidy up and tie back) However I do have one minor problem, I can’t get any sound out of the front panel (top panel in this case) headphone socket.
The front panel connector JAUD1 has nine pins and pin 7 is for future use according to the motherboard manual and pin4 is filtered 5V which I don’t have a plug for.
I have one lead with 3 connectors for mic , ground and mic power which go to pins 1,2 and 3. Another lead has right in & right out and left in &left out and ground. These go to pins 6,7,9&10. There is only one pin marked ground and this is already in use. So I haven’t been able to connect this ground. Is this what is stopping it working.
So although it is only a minor problem, it would be nice to have the headphone socket working. Anyone any thoughts?
Jeantech Apollo
Antec True blue 480W PSU
MSI k8N Neo2 Platinum
AMD 64 3500 Winchester
200 GB Seagate SATA HDD
XFX 6800GT
Soundblaster live 24bit
2GB Crucial 3200
Sony DVD/RW
Sony CD/RW/DVD combo
19” Viewsonic VX912

I really can't comment on the wiring exactly without seeing the schematics for the pins out from the motherboard. However, you apparently have a sound card installed so I am wondering what leads you are plugging your front case jacks into? I personally never have two sound capabilities activated in my systems. Since all MBs now come with integrated sound and I always use a sound card, I disable the onboard sound. I know if the onboard is enabled most boards have pins you can connect to the case sound jacks. When that is done you usually lose the sound out from the back panels jacks. So where do you have your front panel leads connected to? I have seen a couple of cases that have a formal mini-plug that you can plug into the card or the MB to bring the sound to the front of the case. Just some things to think about, probably didn't exactly answer your question.

Similar Messages

Hp p6367c front panel usb ports: how do I access these?

There is a button in front along the side that I assume is supposed to open the expansion bay and provide access to front panel usb ports, but nothing happens when I press this button.

Please look the upgrade and service manual page 13. You will notice the DVD drive, the empty 2nd CD/DVD bay, maybe the pocket drive (if so equipped). Below that is the mystery USB ports, and audio ports.
The panel likely has a small tab, and the access panel flips up, or slides up/down. Without knowing the exact face plate design, it's difficult to know. But if you look at the manual, the mystery will be exposed.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Front panel sound not working

Front panel sound not working* Hello everyone,
I've just bought a PCI Express X-Fi Titanium. So far everything works great with my 5. sound system, but I have problems with my front panel audio.
My case only supports AC97 front panel audio, but has all individual connectors (so 7 single connectors, not one with 0 pins).
I've already tried only connecting 5 pins (the two AC97 return pins unconnected) and connecting all 7 pins. In both ways the microphone works, but sadly not the headphone output. I also tried changing the two options in the driver but that changed nothing.
I did some Google searching and found many reports where the sound itself works with an AC97 front panel on an HD soundcard, just no jack detection.
Any ideas why that isn't working for me?

! Try here for pinouts of your jacks. I have a Cooler Master case that has AC97 and INTEL HD front panel jacks, but here is the kicker. The AC97 jacks come from the front panel first and then about fi've inches from this jack is an INTEL HD jack. A few wires are changed but perhaps these will help...
http://www.intel.com/support/motherboards/desktop/sb/CS-0585.htm
Cheers,
Jerry Macguire

890fxa-gd70 front panel sound

hi, i want to ask if 890fxa-gd70 supports ac97 front panel audio?..
i know the board has hdaudio but my case only has ac97 connection..
i want to know if i can safely plug my ac97 front panel audio to the board..
if not supported how can i use my ac97 front panel audio to my 890fxa-gd70..
will i need to buy a new hdaudio wire or can i just rearrange the pins in my ac97 to make it work..
thanks..

hmm.. does that mean it is safe to plug my ac97 front panel to my mobo?..
btw i saw this on the net:
AC'97 front panel audio does not work with onboard HD Audio
The onboard front panel audio connector provides microphone in and line out signals for the front panel. Many chassis manufacturers offer chassis with front panel audio ports and cabling. Those front panel solutions may support either AC’97 audio or High Definition (HD) audio.
The onboard audio headers on Intel Desktop Boards with the Intel® 945 chipset and later support HD audio.
Compatibility:
HD front panel audio solutions should be plugged into HD onboard headers.
AC’97 front panel audio solutions should be plugged into AC’97 onboard headers.
Some AC’97 front panel audio solutions (but not all) may work with HD onboard headers.
If you want connect an AC’97 front panel audio system to HD onboard headers, try these steps:
Connect Mic_IN (MIC) to MIC2_L.
Connect Audio_R (RIN) to OUT2_R
Connect Audio_L (LIN) to OUT2_L.
MIC_RET and OUT_RET are for HD audio only; you don't need to connect them for AC'97 audio.
Intel does not validate AC’97 front panel audio solutions with boards using HD audio. If the steps above do not work, you will need to use an HD front panel audio solution for full compatibility with Intel Desktop Boards using Intel 945 chipsets and later.
but i dont know what pin# are:
Mic_IN (MIC) : MIC2_L.
Audio_R (RIN) : OUT2_R
Audio_L (LIN) : OUT2_L.
MIC_RET and OUT_RET
i looked at the link you gave me but i cant see any of the listed names there..

Front panel sound.. please help

hi,
My motherboard is MSI 915G Combo. It has CMEDIA AZALIA sound chip which supports multistreaming functionality. The sound output can be taken from frontpanel as well as backpanel audio connectors. But the frontpanel connectors are provided as pins in this motherboard. I got a Mercury KM08 ATX cabinet which has frontpanel ports. But how can I connect the pins?? The cabinet have wires to connect the pins to frontpanel.
There are 7 wires for front panel connectors in cabinet which are
1) Line out FR
2) Line out RR
3) Line out FL
4) Line out RL
5) MIC IN(R)
6) GND
7) MIC Power (L)
In my mobos manual the front pannel connection design is given as,
Pin1 - PORT 1L - Analog port 1-left channel
Pin2 - GND - Ground
Pin3 - PORT 1R - Analog port 1- Right channel
Pin4 - PRESENCE# - Active low signal
Pin5 - PORT 2R - Analog Port 2-Right Channel
Pin6 - SENSE1_RETIRN - jack detection return from front pannel jack1
Pin7 - SENSE_SEND - jack detection sense line
Pin8 - KEY - connector key
Pin9 - PORT 2L - Analog Port2-left channel
Pin10 - SENSE2_RETIRN - jack detection return from front pannel jack2
Please help me to connect the pins to the frontpanel connectors of the cabinet!!!!
also whats are jack sensing pins?? what are they used for??

Jack Sensing is a feature that allows the codec to choose what kind of device (mic, speaker or line-in) you're plugging into the jack by sensing its impedance. It's of no use here for your front panel chassis.
What I would try is to match the PORT 1L/1R with your Line Out FL/FR, and PORT 2L/2R with LineOut RL/RR. There is no MIC connection I guess from the pin names.

Asus Xonar DGX no rear sound / mic. Front panel sound/mic ok. [SOLVED]

Hi guys,
I have a ASUS Xonar DGX PCI-E GX2.5 sound card since my onboard audio crapped out on my motherboard. I just did a first time install on my desktop and the rear portion of my card refuses to work. If I connect up my speakers to my analog output in the back I don't have any options in my sound manager for the analog output to just be a 2.0 system. I get 4.0, 4.1, 5.0, 5.1. All of which do not work obviously. Also my microphone doesn't work plugged into the actual card. If I plug them into the front panel audio, both the microphone and headphone out work. I did some searching, and it seems like a likely cause has something to do with amixer being multichannel. I tried several commands but wasn't successful in getting the audio to work through the back. Any help would be useful, I'm still trying to learn a lot about Arch while doing all this. Thanks in advance!
Solution. Using Alsamixer in terminal and selecting the analog out as stereo headphones, instead of stereo headphones (fp).
Last edited by 15goudreau (2014-08-04 21:56:36)

Search for vid and pid combination, ergo 13f6:8788 in your case. This should be one of the search terms, vid and pid could be also separated, other search terms could include oxygen, sonar, dgx and so on. Simple google search should turn something up.
Edit: The point is to locate a thread/post where the support for this card was implemented/talked about. It could provide some further insight.
The simplest approach would be to download linux-rt sources from aur with yaourt, modify PKGBUILD, compile and then install.
yaourt -G linux-rt
cd linux-rt
Copy this into PKGBUILD replacing the original:
# Maintainer: Joakim Hernberg <[email protected]>
# Contributor: Ray Rashif <[email protected]>
# Contributor: timbosa <[email protected]>
# Contributor: Tobias Powalowski <[email protected]>
# Contributor: Thomas Baechler <[email protected]>
pkgbase=linux-rt
pkgname=('linux-rt' 'linux-rt-headers' 'linux-rt-docs') # Build realtime patched -rt kernel
#pkgname=linux-custom # Build kernel with a different name
_kernelname=${pkgname#linux}
_basekernel=3.14
_releasever=12
_rtpatchver=rt9
pkgrel=1
_pkgver=${_basekernel}.${_releasever}
pkgver=${_basekernel}.${_releasever}_${_rtpatchver}
arch=('i686' 'x86_64')
url="http://rt.wiki.kernel.org/"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
options=('!strip')
source=("https://www.kernel.org/pub/linux/kernel/v3.x/linux-${_basekernel}.tar.xz"
"https://www.kernel.org/pub/linux/kernel/v3.x/patch-${_pkgver}.xz"
"https://www.kernel.org/pub/linux/kernel/projects/rt/${_basekernel}/patch-${_pkgver}-${_rtpatchver}.patch.xz"
# the main kernel config files
'config' 'config.x86_64'
# standard config files for mkinitcpio ramdisk
"${pkgname}.preset"
'change-default-console-loglevel.patch'
'0001-Bluetooth-allocate-static-minor-for-vhci.patch'
'0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch'
'0003-module-remove-MODULE_GENERIC_TABLE.patch'
'0006-genksyms-fix-typeof-handling.patch'
'0007-asus-xonar-dgx.patch')
md5sums=('b621207b3f6ecbb67db18b13258f8ea8'
'89a5af1f3609d0c27e63fea298dd80ed'
'2aa3614e488efa939007a1c428406c30'
'a8126ad28c0a902a575397cacd099db2'
'843119a441c942efc5ec4b73c3c6ced5'
'eb14dcfd80c00852ef81ded6e826826a'
'6623d69fdc936d707990ca060dabd2ce'
'6839ddec74a5300beff1709a81b0e4f3'
'706549e8a05f33f7fc697f28c0ca71d2'
'd23fc66be93ebce698bd7da844789de1'
'16a161979f846b049e90daea907c35dd'
'SKIP')
prepare() {
cd "${srcdir}/linux-${_basekernel}"
# add upstream patch
msg "apply patch-${_pkgver}"
patch -p1 -i "${srcdir}/patch-${_pkgver}"
# add realtime patch
msg "applying patch-${_pkgver}-${_rtpatchver}.patch"
patch -p1 -i "${srcdir}/patch-${_pkgver}-${_rtpatchver}.patch"
# add latest fixes from stable queue, if needed
# http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
# remove this when a Kconfig knob is made available by upstream
# (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
msg "change-default-console-loglevel.patch"
patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
# Fix vhci warning in kmod (to restore every kernel maintainer's sanity)
msg "0001-Bluetooth-allocate-static-minor-for-vhci.patch"
patch -p1 -i "${srcdir}/0001-Bluetooth-allocate-static-minor-for-vhci.patch"
# Fix atkbd aliases
msg "0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
patch -p1 -i "${srcdir}/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
msg "0003-module-remove-MODULE_GENERIC_TABLE.patch"
patch -p1 -i "${srcdir}/0003-module-remove-MODULE_GENERIC_TABLE.patch"
# Fix generation of symbol CRCs
# http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=dc53324060f324e8af6867f57bf4891c13c6ef18
msg "0006-genksyms-fix-typeof-handling.patch"
patch -p1 -i "${srcdir}/0006-genksyms-fix-typeof-handling.patch"
msg "0007-asus-xonar-dgx.patch"
patch -p1 -i "${srcdir}/0007-asus-xonar-dgx.patch"
msg "All patches have successfully been applied"
if [ "${CARCH}" = "x86_64" ]; then
cat "${srcdir}/config.x86_64" > ./.config
else
cat "${srcdir}/config" > ./.config
fi
# if [ "${_kernelname}" != "" ]; then
# sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
# sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
# fi
# set extraversion to pkgrel
#sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
# set localversion to pkgrel-rt
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"-${pkgrel}${_kernelname}\"|g" ./.config
# don't run depmod on 'make install'. We'll do this ourselves in packaging
sed -i '2iexit 0' scripts/depmod.sh
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
#make menuconfig # CLI menu for configuration
#make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# rewrite configuration
yes "" | make config >/dev/null
# stop here
# this is useful to configure the kernel
#msg "Stopping build"; return 1
build() {
cd "${srcdir}/linux-${_basekernel}"
make ${MAKEFLAGS} LOCALVERSION= bzImage modules
package_linux-rt() {
pkgdesc="The Linux Kernel and modules (with realtime preemption)."
#groups=('base')
depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
optdepends=('crda: to set the correct wireless channels of your country')
# provides=("kernel26${_kernelname}=${pkgver}")
# conflicts=("kernel26${_kernelname}")
# replaces=("kernel26${_kernelname}")
backup=("etc/mkinitcpio.d/${pkgname}.preset")
install=${pkgname}.install
cd "${srcdir}/linux-${_basekernel}"
KARCH=x86
# get kernel version
_kernver="$(make LOCALVERSION= kernelrelease)"
# _basekernel=${_kernver%%-*}
# _basekernel=${_basekernel%.*}
mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgname}"
# add vmlinux
install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux"
# set correct depmod command for install
cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
true && install=${install}.pkg
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-i "${startdir}/${install}"
# install mkinitcpio preset file for kernel
install -D -m644 "${srcdir}/${pkgname}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
sed \
-e "1s|'linux.*'|'${pkgname}'|" \
-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgname}\"|" \
-e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgname}.img\"|" \
-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgname}-fallback.img\"|" \
-i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
# remove build and source links
rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf "${pkgdir}/lib/firmware"
# gzip -9 all modules to save 100MB of space
find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
# make room for external modules
ln -s "../extramodules-${_basekernel}${_kernelname:--rt}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
# add real version for building modules and running depmod from post_install/upgrade
mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt}"
echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt}/version"
# Now we call depmod...
depmod -b "$pkgdir" -F System.map "$_kernver"
# move module tree /lib -> /usr/lib
mv "$pkgdir/lib" "$pkgdir/usr"
package_linux-rt-headers() {
pkgdesc="Header files and scripts for building modules for linux kernel (with realtime preemption)."
# provides=("kernel26${_kernelname}-headers=${pkgver}")
# conflicts=("kernel26${_kernelname}-headers")
# replaces=("kernel26${_kernelname}-headers")
install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
cd "${pkgdir}/usr/lib/modules/${_kernver}"
ln -sf ../../../src/linux-${_kernver} build
cd "${srcdir}/linux-${_basekernel}"
install -D -m644 Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Makefile"
install -D -m644 kernel/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile"
install -D -m644 .config \
"${pkgdir}/usr/src/linux-${_kernver}/.config"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include"
for i in acpi asm-generic config crypto drm generated keys linux math-emu \
media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/src/linux-${_kernver}/include/"
done
# copy arch includes for external modules
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/x86"
cp -a arch/x86/include "${pkgdir}/usr/src/linux-${_kernver}/arch/x86/"
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}"
cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}"
# fix permissions on scripts dir
chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel"
cp arch/${KARCH}/Makefile "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
if [ "${CARCH}" = "i686" ]; then
cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
fi
cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel/"
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# add dm headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
cp drivers/md/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
# add inotify.h
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/linux"
cp include/linux/inotify.h "${pkgdir}/usr/src/linux-${_kernver}/include/linux/"
# add wireless headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
cp net/mac80211/*.h "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core"
cp drivers/media/dvb-core/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core/"
# and...
# http://bugs.archlinux.org/task/11194
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
cp include/config/dvb/*.h "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
# add dvb headers
# in reference to:
# http://bugs.archlinux.org/task/20402
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb"
cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends"
cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners"
cp drivers/media/tuners/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners/"
# add xfs and shmem for aufs building
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/mm"
cp fs/xfs/xfs_sb.h "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h"
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p "${pkgdir}"/usr/src/linux-${_kernver}/`echo ${i} | sed 's|/Kconfig.*||'`
cp ${i} "${pkgdir}/usr/src/linux-${_kernver}/${i}"
done
chown -R root.root "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}/usr/src/linux-${_kernver}" -type d -exec chmod 755 {} \;
# strip scripts directory
find "${pkgdir}/usr/src/linux-${_kernver}/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
# remove unneeded architectures
rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
package_linux-rt-docs() {
pkgdesc="Kernel hackers manual - HTML documentation that comes with the Linux kernel (with realtime preemption)."
# provides=("kernel26${_kernelname}-docs=${pkgver}")
# conflicts=("kernel26${_kernelname}-docs")
# replaces=("kernel26${_kernelname}-docs")
cd "${srcdir}/linux-${_basekernel}"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}"
cp -al Documentation "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}" -type f -exec chmod 444 {} \;
find "${pkgdir}" -type d -exec chmod 755 {} \;
# remove a file already in linux package
rm -f "${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# vim:set ts=8 sts=2 sw=2 et:
Then create the file '0007-asus-xonar-dgx.patch' with the following content:
--- a/sound/pci/oxygen/oxygen.c 2014-08-01 20:45:20.299191180 +0200
+++ b/sound/pci/oxygen/oxygen.c 2014-08-01 20:46:11.179947117 +0200
@@ -105,7 +105,7 @@
{ OXYGEN_PCI_SUBID(0x10b0, 0x0219), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x13f6, 0x0001), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x13f6, 0x0010), .driver_data = MODEL_CMEDIA_REF },
- { OXYGEN_PCI_SUBID(0x13f6, 0x8788), .driver_data = MODEL_CMEDIA_REF },
+ { OXYGEN_PCI_SUBID(0x13f6, 0x8788), .driver_data = MODEL_XONAR_DGX },
{ OXYGEN_PCI_SUBID(0x147a, 0xa017), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF },
/* Asus Xonar DG */
Finally run makepkg, should there be errors try removing the src dir first 'yes|rm -r src', then run makepkg again. Should there still be an error post here.
As for the patch, should there be no real difference there is also MODEL_XONAR_DG, might be worth trying out.
Last edited by emeres (2014-08-01 22:34:05)

MOVED: K8t neo fir front panel sound out?

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=117772.0
Was in the wrong board.

Yes they need to be on if front panel is not connected as mentioned in the manual or you will not have have output at the rear connection. If front panel is connected you should have rear panel output if nothing is plugged in on the front panel output.
The jack acts as a switch, nothing plugged in, output to rear which will be the same as if jumpers were on.

XFi Fatality pro series and front panel sound -lack of- so la

Had to chip in on this forum as I'm quite furious with Creative -and I know I'm not the only one, and since CL's people read this board, then could you please take notice of your custormers? After all, aren't we the ones thanks to whom there is still a CL? Therefore could you please stop insulting our intelligence and regard us as milking cows as well?
When you've spent quite a lot of money on a *high end* card like a X-Fi Xtreme gamer Fatality, who in on earth would be willing and happy to have to fork out for a front panel costing nearly half the price of the card just for the privilege of being able to connect your case front panel headphone and mic to the sound card?! Do I expect the connection from the card to front case audio to come as standard? YES. Do I take it kindly to see a proprietary connection preventing me to do that unless I buy another expensi've toy from CL, or do I want to have to mod a cable or buy a modded one to that effect? NO! CL has voiced concerns that people making/using modded cables could result in damage/fry the card, well who's fault is that if not Creative's? How about doing the decent thing and provide the cable WITH the card in the first place, and even more decent, why not provide these cards' owners with one? Can't be the case of not having such cables since CL is making the proprietary connector for their front panel in the first place. If insisting no such cables are available, then make them!
Meanwhile cards' owners are left with little alternati've if they cannot have their onboard sound (to connect to the case audio) and their CL card coexist without conflict. This is lame at best, arrogant at worse and the same approach as with the cards' drivers -will not go there as there are enough threads about that but for the record, if it wasn't for a certain someone's functional drivers, how many cards would still be in use? I guess it could be said I was stupid enough to get this card, should have known better and go for another make which would not be giving me such grief! I emphasize again, these cards aren't cheap to buy so Creative, I am NOT interested in the forthcoming X-Fi2 series, just provide the present ones with full functionality and the means to at least connect to our case audio without any more expense on our part.

Thanks for that, Cornholio_OH! I've already looked into PC Performance's adapter and indeed noticed that those using it said PCP are wiring it wrong. So I got in touch with PCP about it and they deny the wrong wiring, stating that there's no mistake in how the cable is made but only how cases front ports are wired and grounded (?!). Also, they only provide the adapter for AC97 and not HD audio and some people had trouble with the AC97 connection, though I suppose that's better than nothing
Though you are right that it's an alternati've that may be worth the money, personally I strongly bulk at having to get one of those, especially when adding shipping costs to Europe, it no longer will be worth the money! When nowadays there are cards that do perform as well if not surpassing CL's and who provide the adequate connection and at no extra cost, I am strongly inclined to getting rid of the Fatality -practically brand new one by the way- and go for another make. Call it stubbornness or principle, if us consumers just roll over and give in having to either buy more accessories or modded cables, we're sending the wrong signal to CL and everyone else that it's okay to take us for stupid and milk us.

Z87-G43 Board Front panel USB Problem

I have installed the board and windows 7 64bit
Updated the Bios and checked everything I could. I do NOT get the connect tones from anything I connect to the front panel USB ports. I have used 2 (KNOWN GOOD, works on other machines) connector sets with 2 ports each, and ALL of the ports have the same symptoms. All of the usb devices have the connect tones when inserted to any of the rear ports. I have not tried the USB3 port for the front because I do not have the wiring and related header connector. My phone, (Samsung GS4) when connected to the rear ports always opens an explorer window showing the Ext SDCard and the Internal memory. when I connect to any of the front panel ports, no sound, no pop-up of explorer, but I do see the device when I manually open explorer and can open the connection manually.
I am at a loss as to what is not right and how I can make it work correctly. If anyone can give me any information to correct this, I'd be very grateful. (Tech Support was no help)
Thank you, and Aloha From Hawaii!

Thank you for your reply.
I have an older Antec Case and I have tried a brand new front panel connector I got from Frys and it acts the same Way. the only difference is that the connector is a one piece assembly that connects directly to the mobo header pins. the one in the case has individual pin connectors. both systems end up with the same scenario. When I plug in a thumb drive, there is no connect or disconnect sound and I still can manually open explorer and access the thumb drive or my phone but nothing pops up to signify any port access.BTW, I am a systems engineer and have spent the last 13 years building machines for a transportation company (bus) My previous board in the same case used the front panel connection and it worked just fine, but since the board died and was only supportive of XP I decided to upgrade to Win 7 64bit and have 16gb ram. All the rear connectors work just fine, but I need all of them so have to use the front panel connection for phone, and thumb drive access. I suspect the mobo has a design problem. The tech support person had no suggestion to correct this problem too! :<(

No Front Panel Audio

I have an SB Audigy 2 ZS and an Antec Aria case. I would like to use the front panel audio that uses the Intel Standard plug but acording to Creative tech support they don't support it.
The tech basically said that they don't know anything and I have to ask the forum if I want any useful information about the card. I didn't realize Creative tech support was so bad (broke several rules of the trade). But I am here to ask you guys now.
Is there a way to hook up the front panel audio ports to the sound card? My dell uses that white plug to do this. Does anyone know of an adapter that uses the intel plug on one side and the white plug so we can use the fron panel audio and mic jacks?
Thanks.

No-one replied to my similar question here, so I did some googling and posted other places online. Here are some links that should help you in your problem. I have an Antec case myself, and while I have not tried this yet, I think it should work, assuming your audio connector is similar to mine. My Antec P60 case has an Intel-spec AC97 front panel connector, but it also branches into individual leads for non-standard setu
ps.
If you have the correct connector on your Audigy2, this should work. Here are the links I have:
http://www.hardforum.com/showthread.php?t=830840
http://www.driverheaven.net/showthread.php?s=597f798243e2dfcc492d0fce8dd0d&t=5 279&page=&pp=5
http://forums.devhardware.com/t5584/s.html
Someone at Creative Labs should make a sticky out of this procedure and put it in a note at the top of the thread; I bet this gets asked a lot.

CT4670 Front Panel

Hi, I'm using a ct4670 with a system i'm building, but my case has a front panel ac'97 and an HD Audio cables, will I be able to use the front panel audio port with this card? I see it has a JP2 port but i can't find any info about it

' It's not the bacground sound what you understand - the becground sound is something like similar of "fax sound" but it's came from mobo or cpu - becaouse i can hear how i scrolle throw web or if i start to download something i hear stream sound. I try to mute all - nothing. Also bacground sone didnt change if i change any of volume.

How can I enable my front panel audio??

the type of my mainboard is MS-6552,when I inserted my earphone and microphone into the jack of the box,I can hear nothing! then I opened the box,I found that the wire was not the proper place,there were 8 wires whick marked with “MIC IN,GND,LIN,LOUT,MIC IN,GND,RIN,ROUT”,I also found the F_AUDIO on the mainboard,there were 18 pin on it,I cannot matching them! who can help me?thanx

Look through you mobo's manual and you'll find it... Don't get stressed out too early... The first computer I built myself got me stuck in the same area for hours!!!
Btw, you've got to remove the jumpers on your mobo to enable front panel sound. Be warned that most mobo only allows you to us either front panel or back panel sound only. Please also ensure that there are no stand offs underneath your mobo.
All the Best... :D!!!

Front panel USB - Where to hook up?

I've just put together a system using the 845GE Max M/B. I would like to make use of the front panel USB ports on the case, but can't figure where to plug them in. I'm using the USB 2 card, and there's another USB jack on the M/b...
Any ideas?
Thanks,
Wedge

Looks to me like JUSB1 or JUSB2. It's in the manual.

SB X-Fi Titanium Front Panel not working

Hello,
I would like to fully use the Front Panel, because I own a 5. Surround sound system blocking all the backpanel slots. The problem is, that I simply get no sound from the front panel sound output, while the microfone works just fine. Is there some kind of special option to enable it's
The FP is properly plugged into my SB X-Fi Titanium. And it's also not broken, because the FP works perfectly with my onboard soundchip (though it seems to cause crackling in my headphones, so I cannot use it for it).
... Okay now the Mic FP is not working aswell, eventhough it did when I tried it the last time. I set everything I could, like choosing Headphone Mode, enabling FrontPanel everywhere and all that. So why is it still not working?
RIG: Win XP 32bit
Asus P7p55d
Creative SB X-Fi Titanium
normal Stereo Headset
Thanks in advance for any help!

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

How to get front panel sou

how to get front panel sound for me headphones, i have audigy 2 ZS.

Works Great. Thanks
!!! Although .... the gain on the front mic is very low compared to the rear mic jack. Instead of using the x0 pin plug for the mic, I configured/spliced the front mic wires into a (rear) pass through /8" jack lead. Now, the front panel mic is at full output. I lose the?rear mic input, but I'll never use it now that I have front panel input.

Front panel sound ports

Similar Messages

Maybe you are looking for