Front panel stopped working properly on Qosmio X300/305

Greetings and thanks for reading,
I got my computer not a week ago and since then I've had some problems, mostly with blue screens when I hit the FN key. Looking into the problem, I deactivated various Toshiba services and finally found the culprit: hwsetup.exe. Running it manually crashed my computer and it still does. However, after having installed a new version of it, it seems that FN works ok now. Running hwsetup still crashes the computer though.
Any ideas what might cause this? The computer is brand new so I don't see what I might have done to cause this situation myself.
Now to the next problem: it seems that the front panel has stopped working properly, the touch keys that let you start the Dolby application, the webcam application and also turn on and off the red lights on the keyboard. When I click the touch keys, all I get is the beep-sound from the speakers, but nothing happens. I guess I must have deactivated something by mistake. Any thoughts?
I would appreciate any input immensely, folks, so please share your theories with me. It's such a fine laptop and I can hardly sleep right now because of these problems.. silly, yes, but I want everything to be perfect since I spent so much money.
Best regards,
Johan

> I am considering a re-installation of the whole OS, but if there is anything else I can do before resorting to that option I would very interested in knowing about it.
I think you should reinstall the OS using the Toshiba image because the BSOD can be related to the software and to the hardware issue.
Reinstalling the OS you could find out if this issue is caused by software fault or hardware fault.
If the reinstallation will not help you to sort out this issue then the hardware malfunction can be possible and the Toshiba technician should check it.
By the way;
> As a result of all this, my touchpad has stopped working properly. FN-F9 doesn't help. However, it's interesting to see that I can actually move the cursor with the pad during a microsecond when the computer is loading applications into the system tray during startup, then it's immediately disabled
Seems the touchpad was disabled in the Synaptics utility.
As you said the touchpad works for a short time. Why? Because the touchpad uses the default Microsoft touchpad driver until the Synaptics utility has been loaded.
Anyway, if you would reinstall the OS the touchpad issue should be solved too

Similar Messages

Midi in from front panel stopped working (x-fi platinum)

8midi in from front panel stopped working (x-fi platinum)" Not sure if I burned the connector or if something is wrong with the driver. My midikeyboard can't be used with sb x-fi platinum anymore.
I borrowed terratec soundcard from big brother a while and used my midikeybaord in with that and output with x-fi card. but now he's taken the terratec back.
and I'd like to really know what's wrong witht he midi in.
Does anyone know what might be the problem?
I have connected normal midi cable -> normalmidi to tiny x-fi port convertor -> front panel
This used to work a bunch of months ago.
i'm using winxp latest updates. i'm trying out reaper. I've got asio4all installed but i usually use directsound when I'm composing music.
tahnks for any help

i have the exact same problem with vista!!!no sound from the front panel of x-fi platinum!i don't know what to do!

Simultaneously Controlling LabVIEW Remote Front Panels not working properly

We are trying to simultaneously control a Executable file from different PC as per the description given in link below:
http://www.ni.com/white-paper/4867/en
But the issue is that we are not able to view it in Web browser as in "Web Publishing tool" When we click on "Preview in Browser" it Pop up a message " Web server not started. Do you want to start it now? We Click YES. Still nothing happens.
We have exactly followed the steps given in the "white-paper/4867/en i.e. Selected "Enable web server" and VI Properties to "Reentrant execution".
In Control Panel>>Administrative Tools>> Services we found that NI Web Server is available but NI Application Server is not installed. Is this is the reason why we are not able to Preview in Browser. If yes how to install that OR any thing else we are missing?
Thanks
R.B.Chavan

Mateus23 wrote:
I'm now developing the web version in HTML 5, using web services to comunicate with my labview application.
There you go, good solution. When doing this remember that you have access to the database on the server. A structure I have found effective is to use the server DB like a dropbox that I write to, and the web server reads from.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

I get the following message: Mozilla Firefox plugin-container has stopped working properly. What do I do?

the message:" Mozilla Firefox plugin-container has stopped working properly" appears regularly in my maintenance center. I am on Windows 7 and Firefox 3.6.17

I had the same type of failure. It was caused by a FF upgrade from V4 to V9.1. Dearing 1955 did not say what version caused the problem. My USB ports started acting up. I could not install the Webcam that was installed before. The HP Scanner of my OJ 8500 stopped working (USB). Did get it to work via Wireless. Removing FF did not clear the problem. Believe I have infected USB driver now.

ITunes has stopped working properly.

iTunes has stopped working properly.

Ok.
3 days ago, for no apparent reason my itunes stopped working.
This only happens after it has "synced" with the itunes store and prepares to upload remaining songs.
NOTHING has changed since then other than downloading latest itunes (11.1...whatever) which i was recommended to do after it stopped working.
I am using windows 7
Latest itunes version (for windows)
I have thousand of songs in icloud, which were uploading fine until 3 days ago.
Windows message reads something like: Itunes has stopped working properly, windows will now close the programme blah blah balh.
Bit annoyed. Tried copying the dll file from QT that somebody mentioned earlier. Also tried "repairing" programme and re-downloading update.
Not working still!!!! HELP PLEASE!!!

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly. Is there a fix/test.

After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly.
What I get is a RED exclamation and "Not Delivered". It happens even if i resend it over and over.
I have made sure that the 3 devices all have the same settins in iMessage.
I have made sure to try doing it from the same network and from the cell provider network.
I have tried rebooting all three devices.
The only way to get it to work on my iphone and iPad is to dissable it in Mavericks on my MacBook Pro.
Is this a "feature" of the new OS?

Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Media smart tv stopped working properly

I get this error message :media smart tv stopped working properly. Cant find the software, can anyone help.?

I'm not even sure if I am to use the YouCam or media smart software. This is confusing, it worked the first time I used it then you cam wanted to update system andf now it says I have no webcam....it's built in.
I have a pavilion dv7

Mozilla Firefox plugin-container has stopped working properly

Mozilla Firefox plugin-container has stopped working properly. FOR THE UMPTEENTH DAMN TIME... HOW DO I FIX THIS on Firefox 3.6.13!?!?!?!?!?!?!?
''edited by a moderator - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines ''

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

Stocks App Stopped Working Properly

The Stocks App on my 3G iPhone has recently stopped working properly.
When I open it, the current share prices all still come up as expected, but the numbers at the right hand side in the green and red boxes where it tells you the + or - shift for the day no longer show. Now they are all blank.
Has anyone else experienced this? If so, do you have any suggestions to fix it?

Have you tried a reset (hold the sleep/wake & home button until the Apple logo appears while ignoring the slide to turn off)?

Clone tool has stopped working properly, the sample area doesn't follow the target area?

Clone tool has stopped working properly, the sample area doesn't follow the target area?

I understand. I was very unhappy with Adobe when my PSE 11 stoped working properly. I had it for only about 6-7months before I updated my software on my imac and it all went downhill.... Then to add to that my Adobe account was hacked. Adobe never informed me of this situation. I heard through a friend that I should check to see if I was one of the very many who's online accounts were tampered with. I had to reset every single password and username for nearly 30 online accounts to avoid any further tampering with the hackers. And all Adobe suggested was for me to pay for an upgrade to PSE 12 which I did but wasnt very impressed to say the least ( i was on an online chat with them for over 2hours trying to get my PSE 11 issues solved to no avail). Then this sluggish performance starts happening again using the new version PSE 12?. I'm going to stay clear of adobe if I have the option to purchase similiar software from another supplier. I would and will encourage anyone else who has problems with there software to do the same. Older versions should work perfectly fine for ages. I wonder If Adobe is trying to get us all to pay for the monthly subscription option(s) to avoid having issues with older versions of their software. As the subscription option keeps you ontop of all the latest versions... I wouldn't put it past them.
All the best returned,
Ray

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. Any ideas?

Spotlight has stopped working properly. Even when a known file is entered (with full file name) in search, it fails to find it. It finds some things, but is not to be depended upon. Any ideas?

Try reindexing spotlight: Spotlight: How to re-index folders or volumes - Apple Support
If you still have problems, open Console app, select All Messages, then search for mds in the search field. Then search for mdworker. See if there are any messages indicating it is having problems with certain files.
You can also delete the index altogether and cause it to reindex with a command in Terminal. I have always assumed the method above will do the same, but I'm not certain. You must run this command while logged into an admin account. Copy the whole line and paste it into Terminal.
sudo mdutil -E /
sudo temporarily elevates your privileges and will ask for your password. When you type it in, there won't be any response in the Terminal. Just type it and hit return.

HT3669 After update the printer HP Deskjet F300 Series stopped working properly

I would like to notify you that i use drivers for HP Deskjet F300 Series Version 1.0.1 and after this update the version upgraded in version 2.0.0 and the printer stopped working properly. I removed from library all folder of HP drivers and then i re-install old version from .dmg file from this official link of HP and now it works properly again.

Hi ds5710,
I understand you have a Deskjet F300 series printer that is currently telling you it's offline and won't print. I will certainly do my best to assist you in resolving this issue.
If you're using Windows, I would suggest you start by downloading and running the HP Print and Scan Doctor as it should be able to rectify whatever is causing your printer to show as offline.
If that doesn't resolve your issue, or you're using a Mac, please get back to me with which version of Windows or Mac that you're using and I will certainly see what else we can do!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Adobe flash player stopped working properly please help

i'm using adobe flash player version10.0.32.18 on vista, and everytime i open my facebook application, i often encountered adobe flash player stopped working properly, then the page will recover, then after few minutes it will stopped then recover again. please someone help me how to solve this problem.

Hi, Thanks. Your Flash Player files and the SWO(if it is vs 10.0.45.2) are correct. Are you having problems on other sites
or just that one? Are you getting a message that is different than "you need to update your Flash Player?"
Many times it is the websites or if you are getting this from a game, then that can be causing the problem. I haven't been
able to determine if the websites that have NOT updated to support the latest Flash Player are just putting out a generic
message or not. You might want to check with the site to see if they support FP vs 10.0.45.2.
You may have an add on that is conflicting also, it is hard to tell. Some anti-virus programs have add ons that may conflict.
Since several users are having problems with Facebook, Farmville, Zynga, etc. my opinion is that it is not your computer.
One that posted here is waiting on a reply.
Thanks,
eidnolb

Front panel stopped working properly on Qosmio X300/305

Similar Messages

Maybe you are looking for