Front pannel scroll bar get disabled(not visible)

Hi,
I am facing some strange problem with Lab View front pannel. I am doing some expriement with PictRing vi which is in Ring&Enum. Then while doing this I lost my scroll bar(both vertical & horizontal) from front pannel. But it's present in block diagram of same vi. I deleted the PictRing vi and restarted my pc considering it may visible the scroll bar but it's not working. If I create new vi their on front pannel scroll bar is appearing. What might be a problem with my vi?
Thanks in Advance.
Thanks :-
Mike

What version of LV are you using? Can you post your VI? I would be happy to take a look see.
Is it possible that you turned scrollbars off?
Got to VI Properties>>Window Appearance>>Customize and make sure that the checkboxes next to Vertical/Horizontal Scrollbars are turned on.
If you are using multiple panes you may have to turn scrollbars on individually. You do this by right-clicking on a splitter and selecting the visiblity of the scrollbars on a per-pane basis.
Finally, if you have set the option "Fit Control to Panel/Pane" this can also turn off your scrollbars. Again, you can just reenable them via the VI Properties box or the splitter popups.
Jeff Peters

Similar Messages

Front panel scroll bars are missing

Hi
Can somebady tell me how to get my front panel scroll bars back. Block diagram is showing them but front panel is not. i can probably open another vi and copy and paste my application. Thanks

suni wrote:
Can somebady tell me how to get my front panel scroll bars back. Block diagram is showing them but front panel is not. i can probably open another vi and copy and paste my application. Thanks
What is your LabVIEW version?
All the above responses only apply if your front panel does NOT contain splitter bars. Once you have splitter bars, things get a bit more complicated and you can easily create a situation where the scroll bars are also off in edit mode and the VI properties cannot get them back directly.
What you need to do is right-click in the splitter bar and select e.g. right pane (or whatever) as follows:
Message Edited by altenbach on 09-17-2008 03:56 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
recoverScrollers.png ‏17 KB

Scroll bar on editor not working

I recently upgraded to phtoshop elments 11.0 to 13.0
In the editor mode I cannot use the scroll bar. The scroll bar works fine in the orgnizaer mode. I have tried three different mouses and there is no difference.
Tom Fitch, San Antonio Texas

I am using Windows 7 Professional
In the organizer portion the scroll bar moves. When I put my mouse or
arrow on the scroll bar and drag it then of course I move through the different
rows of folders or rows of pictures once in the photo bin.
It was doing it with Photoshop Elements 11.0 and I thought 13.0 might fix
the problem and the scroll bar did move on the first try but not since then.
When I try and load the photo bin and I am choosing the right folder to
load the scroll bar just does not move. I can select the right folder by
using my up and down arrow or the page up and down and then click on the right
folder and then it loads.
Once I get the right folder of pictures loaded and once I finish the first
row of pictures I cannot use my mouse and arrow to drag the scroll bar
down to get to the next row of pictures. I can place my arrow on my mouse
below the scroll bar and got to the next row but I usually get only half the
picture and sometimes only 1/4 of it but I can usually get it loaded up and
edit the pictures and move on the next picture but it is very slow and
frustrating.
Any help would be appreciated.
I protested to an adobe supervisor and I got an e-mail and somebody is
supposed to call me tomorrow so hopefully then can log on to my computer and
see what I am talking about.
Sound like something got corruped in the editor mode only. I tried 3
different mouses and even the computer mouse and no difference.
Tom Fitch
In a message dated 12/17/2014 5:05:37 P.M. Central Standard Time,
[email protected] writes:
scroll bar on editor not working
created by RKelly_ (https://forums.adobe.com/people/R_Kelly) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/7024909#7024909)

JComboBox scroll bar thumb does not move

I have an application that is using a third-party panel class that extends JPanel. For some reason my JComboBox scroll bar thumbs do not move unless the pop-up menu viewport extends outside the frame boundary. Does anyone have any idea what might be causing this or have any suggestions on how I might trouble shoot the problem? I would appreciate any feedback, thanks.

Arrgh, I first reported this behavior (well, alright, I was using a table control/indicator, not the MCL) back in LabVIEW 8.0. The discussion thread can be found on the LAVA forums, starting September 14, 2006. In that discussion, Scott Menjoulet and jhoskins seemed to be able to work around it with the "custom control in a project fix", but I could never get that to work, at least not when I built the custom table into an executable. I filed a bug report on the next beta cycle, but I can't find my old bug reports/CARs online anymore.
But I'm reasonably certain it's been an identified bug since 8.5.
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

How can I get the scroll bars to be more visible/contrasting?

The scroll bars are difficult for me to differentiate from their background. Can I change their colour or darkness to make them more visible?

Firefox uses the native scroll bars by default.<br />
You can try to select another window theme in your Linux distribution that has better scroll bar appearance or see if installing a Firefox theme helps.
* https://support.mozilla.org/kb/Using+themes+with+Firefox
*https://addons.mozilla.org/firefox/themes/

Scroll Bar Enable/Disable

I need a code that will enable and disable the browser window
scroll bars when the browser window is resized smaller than my
MovieClip (800x650) and will disable them when the browser window
is bigger than the movie clip.
I have my publish settings set at 100% and becuase of this it
does not allow the browser scroll bars to be enabled/disabled.
Thanks In Advance For Any Help You Can Provide!

The scrollbar can be placed on a separate stacked canvas, the same dimensions as the scrollbar. Then the canvas can be shown or hidden.

Scroll bars in Lion - Not what I was expecting

On upgrading to Lion, which was relatively painless, I was surprised at the lack of control that I now have with the scroll bars. Previous versions have always had some way to increment/decrement position using arrow heads, but Lion doesn't give me any option to do this. I find it deeply frustrating. I can't believe I am th eonly one who is experiencing this so either you all do things differently to me or I haven't figured out the best way to use it (or change it).
I am right in thinking there is no option to change this behaviour?
Thanks

Hi Tom,
I thought that was the case.
The rest of Lion works fine and I can do everything else so it is only these blasted scroll bars that give me grief.
I do have Snow Leopard backed up on a NAS, and I have the original Snow Leopard disc. All data is double backed so no problem to rebuild if needs be. I'm just amazed that the scroll bars have been so badly designed in a system that gets everything else right.
Thanks
TT

How to define area of front panel scroll bars so that you can't scroll to empty areas?

The front panel of my executable VI has scroll bars. Is is possible to set the scroll bars so that one
cannot scroll to areas where there isn't anything present? Can I define the usable area of the front
panel to labview?
Thanks...
-Umar.

Hello...
Try this one==>> File - VI Properties - Window Appearance - Select Custom - Customize - Deselect Show Scroll Bars - Save VI
Hope this will help you...

When customizing the Add-on Bar, separators ("|") are not visible. How can I remove them?

Not only are they not visible, they're not selectable either. They /do/ appear normally (i.e., when not customizing toolbars). Running Firefox 22.0 on Linux Mint 15 (Olivia: x86-64).

Your toolbar customizations are stored in the localstore.rdf data file in your currently active Firefox profile folder. This XML-based file makes difficult reading and I don't recall seeing any good documentation on how to edit it. If you want to give it a try, please make a backup first.
If the file becomes corrupted (or more corrupted, as the case may be), you can rename or move it and Firefox will generate a new one with default settings, and you can start customizing from scratch.
With that out of the way, it actually looks as though you should be able to find and remove the separators.
<RDF:Description RDF:about="chrome://browser/content/browser.xul#'''addon-bar'''"
mode="icons"
collapsed="false"
currentset="addonbar-closebutton,stylish-toolbar-button,spring,downloads-button,'''separator''',fireshot-Capture-Button,greasemonkey-tbb,noscript-tbb,fiddlerhook-toolbar-button,status-bar" />
To give this a try:
Open your current Firefox settings (AKA Firefox profile) folder using
Help > Troubleshooting Information > "Open Directory" button
Switch back to Firefox and Exit
Pause while Firefox finishes its cleanup, then make a backup copy of '''localstore.rdf''' (e.g., localstore.0808) and open the rdf file in a text editor to find and edit the separators out of the addon bar.
When you restart Firefox, your changes should be evident.
Any luck?

List: Scrolled item's label not visible. Help!

I've created a subclass of List so that I can scroll through the list without the use of scrollbars. The test application is spin-off of the List sample app. But when using the buttons to scroll down or up, some of the items in the list are not being shown properly.
Does anyone know how get the labels of the list items to refresh themselves, or, is there a better approach for performing the manual scrolling so that this doesn't happen?
Here is the code I'm using to do the scrolling. This is in the subclass of List...
            public function scrollUp(timerEvent:TimerEvent):void {
                if (_position > 0) {
                    _position = _position - 1;
                    scrollVertically(_position, 1, false);
                } else {
                    stopScrolling();
Attached are the files ManuallyScrolledList.mxml and the application that drives it.
Thanks in advance for any comments or suggestions.

The label associated with an LOV entry for a Select List.
If I have a list of areas, say defined as
STATIC:Hobbiton;1,Bywater;2,Harbottle;3and a branch to a page with a report region showing a report based on the value of the area select list, I want a dynamic region title to show Results for Hobbiton rather than Results for 1, which is what you get if using a title defined as
Results for &P2_AREA.

Bar code is not visible on printout.

Hi ,
I want to print barcode in sap script by font .Already i have tried with transaction se73 and its visible on print priview but not coming on printout. So please tell me other mehtod of copying image.
Thanks and regards,
Ranu

Hi,
Thanks . I agree with you. But i want to solve it by uploading font.could u tell me the process.
Regards,
Himanshu

Scroll bar direction will not change

When I go to general preferences, there is no way to change the scroll direction any longer.

I know that is where it is suppose to be but it is not. I remember it being there at one time, but it is no longer available. I have the latest software and uodates.
I am using a microsoft mouse, could that be a problem?

Top bar of desktop not visible

mini mac connected to HD tv set, picture quality good but the top end of display it's cut off; any solution?

Go to Apple > System Preferences > Displays > Display tab > click on the Scaled button and select a different Resolution.

I have osx 10.6.8 and have lost the side scroll bars on Safari. When I go into System Preferences there is NOT an "always" option for displaying Scroll Bar. How do I get it them to display again?

When using Safari the scroll bars no longer appear on the right hand side. When I go into System Preferences the option to Always have the scroll bars displayed is NOT there. How/Where do I go to get these to show all the time?

It SHOULD be under the General tab in System Preferences:
(Note that this is a Mavericks screenshot, but it should be there in Snow Leopard, too, if indeed you're still running 10.6.8 as your profile says)
Clinton

My scroll bar dissapears when my firefox screen isn't maximized - how do I make it show up when not full screen?

This just happened spontaneously yesterday - did I press some strange shortcut to make this happen? How do I get my scroll bar back when not in full screen?
Please help!

It is possible that the screen is too high and that the status bar and scroll bar fall off at the bottom.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Front pannel scroll bar get disabled(not visible)

Similar Messages

Maybe you are looking for