Front right speaker makes brbrbr noise

I doubt that such a speaker can be repaired,so the question is,can i buy another,and how can i make the switch?
imac crt 600 blue dal   Mac OS 9.2.x  

If you get any third party speakers that connect to the headphone port, that would shut down the noise and allow you to have sound. In the meantime, you could plug some headphones into there to quiet things down a bit.

Similar Messages

  • Pavilion DV6 (6C35TX) front right speaker sounds terrible

    front right speaker makes a crackling sound, how much is it to repair ,replace this speaker
    out of warranty

    Hello onlinejames,
    Starting on Page 91 from the HP Pavilion dv6 Notebook PC Maintenance and Service Guide will show you how to remove and replace the speaker(s) in your HP Pavilion dv6-6c35tx Entertainment Notebook PC.
    Speaker Kit (includes left and right speakers and cable).
    Spare part number: 665340-001
    If you have any issues with finding/ordering the part needed, follow this link: http://partsurfer.hp.com/ContactUs.aspx
    Best regards,
    I worked on behalf of HP.

  • Front Right Speaker Sometimes not Making a Sound, P5800

    Hi,
    I have the Creative Inspire P5800 Speakers. Every so often, the sound that my front right speaker makes is very faint. It happens all of a sudden, the only way to fix it is to calibrate my speakers from my Sound Card settings a couple of times before it returns to normal and then it does the same thing again later. My Sound Card is Creative Audigy 2 ZS. This has only started happening when I had to disconnect my cables from the back of my computer as I had to install a new hard drive and install Windows XP and drivers again. My cables are properly connected as I did a Speaker Channel Test and the calibrator reports no miswired cables. Does anyone know how I can fix this?
    Thanks in advance.
    Message Edited by Cypher_489 on 08-20-2005 07:57 PM

    Follow basic troubleshooting found in your user Guide for your phone.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Sound from front right speaker not working, playing out of le

    I have a Soundblaster X-Fi Fatalty and it'ss a little under year old with all current drivers. The front right speaker plays no sound but the front left speaker plays what is supposed to come out of the front right. I have it set on the 5. surround sound but it doesn?t work on any other settings. A week ago everything was working fine I have not installed anything new since then. I'm not sure if this is a hardware problem or something set wrong on my computer. Does anyone have a solution or know what may be causing this? Also I checked the speakers, they work fine.Message Edited by Nowise0 on 0-04-2006 03:52 PM

    I ghave this same problem with an XFi Elite pro card and a 5. speaker system. To get sound coming out all 5 correct speakers and subwoofer i have to select 7. speaker set up then 5., then 6. and finally 5. again then it works fine - I have to do the selection in THX from game consule mode to get it to work.

  • GigaWorks G550W Front Right Speaker jack.

    I've had my G550W speakers for just over a month now, and for some reason the front right speaker is getting no sound even when the rest are. I've tried a few tests, checked all the software and connections. It seems to me that the problem is the actual speaker conenction jack on the Subwoofer. When I swapped my two front speakers the right speaker (which I initially thought was the issue) worked fine. The speaker cable is also in fine working order.
    I don't know why this has happened, the wires have been under no strain, nothing has happened to the subwoofer, so why would this fault occur?
    I'm pretty annoyed/worried now because it seems to be a hardware fault and I'm not too pleased.

    If it still vibrates after switching btw speakers and when the vol is down, it is probably dc leakage from the amplifier circuit in the sub. It better to let someone to service it before the dc burns your spk voice coil.

  • Front Right Speaker Very Very Quiet!!

    Hello,
    I have a Creative Inspire P5800 (5.1) Speaker System & my sound card is Creative Sound Blaster Live 24-Bit. All purchased about Septemeber this year, all has been working fine until today when the front right speaker has gone very very quiet!? All other speakers work fine, Can anyone help?
    Cheers,
    Oidest

    I am having the exact same problem and there is no reply to any post on this issue what so ever on the internet.
    I have all the other speakers working perfectly. I have tested the speakers on another 5.1 source and they all work fine.
    This is such a pathetic problem, which is definitely routed somewhere in the drivers.
    I have absolutely no idea where to go.
    I used to be able to turn off the Hardware Acceleration to zero and then all 5 speakers would magically work. However now when I do that it is only coming out of speaker (Centre front).
    Can't you fix your drivers Creative? I am sending this back to you for creating sub-standard drivers for your hardware.

  • Help!! T6060 5.1 Front right speaker is not working properly!!

    I have new Inspire t6060 5.1 speakers, but i have problems , because on riht side speaker is not working!! all speakers are working good, only one front right speaker is not working i have altec 97 (asus intergrated suond card), i have tryed to instal new audio drivers , but it has not solved the problem. there is the problem? plz help!!

    Here here, you are not the only one.
    Have absolutely no solution to this problem apart from sending it back and never buying anything Creative ever again.
    They refuse to acknowledge this problem.

  • Audigy 2 ZS + Hercules 5.1 (front right speaker very fai

    I dont know if this has been bought up before (i didnt notice it in the first 5 pages) but, After installing the card and drivers, i have noticed that my right channel is very very soft (nearly un detectable). I have run through both the channel and noise tests and all the other speakers work fine, its just the right speaker being very very dull. The same thing happens when im using headphones.
    I was wondering if there was a setting that can be changed to fix this?
    ThanksMessage Edited by MrEnforcer on 08-04-2005 06:53 PM

    check the speaker settings in speaker setup/advanced and replace the rca plug from the PC to the amp

  • VIDEO ATTACHED...my 2011 macbook pro hinge cover slides to the left and right and makes weird noise when i push down on it....plzzz watch

    u can see how the hinge cover moves sideways bc u can see the crack get bigger when i move it one way and u can hear the noise when i push down it......TURN VOLUME ALL THE WAY UP

    http://www.youtube.com/watch?v=5Vrqpa2Y2xA

  • "Front Left", "Front Right" from the same speak

    I am having an issue I am hoping to get answered. I have Boston Acoustic speakers which I am currently using on a new computer with a SoundBlaster XiFi. I can only hear sound from the left channel (The speaker that plugs INTO the right speaker that plugs into the Subwoofer). When I go to run an diagnostics test, it says :
    Speaker : Front Left... Front Right
    Speaker 2: (Nothing)
    Speaker 3: Rear Left
    Speaker 4: Rear right.
    I know that this is not a problem with the hardware as I can plug these speakers into the computer right next to me & they work fine. I see that this problem crops up very often on these forums, I hope someone can point me in the right direction.
    Thanks

    No jack problem at all. I have also suffered myself some problems with "speaker switching" with the X-Fi. Only a full reinstall of all creative drivers has solved it, at least for me. I have posted it some times here, but I always get silence as a response. A common problem is that front right speaker dissapears when it was working perfectly.
    It's a bug, no matter what Creative says (unfortunately they say nothing), there are a lot of posts regarding this

  • Speaker makes noise on Tecra M5

    I dont know why but my Tecra M5-133, sound working not properly,
    the speaker make so noise though i have installed audio driver.
    Any one can help ?
    Thanhx in advance.
    Thanh

    Hi
    One question; Do you use the operating system from the Toshiba factory image? If not you should install it!! Then check if the same happens on the fresh recovered notebook.
    I have to say that you posting is very unclearbut I will try my best ;)
    Im not sure what could be wrong but I think you should firstly find out if this issue is related to the speakers only or to the sound card.
    Please connect the headphones and check if the same sound appears through the headphones.
    If the same noise will appear through the headphones I would recommend removing the old sound driver and to install a new version from the Toshiba page.

  • Right speaker on Macbook Pro (with Retina) not working..

    Bought Macbook Pro with retina display yesterday and just noticed sounds is only coming from the left speaker. I've checked on system preferences and when I turn the left hand speaker down there is no sound. Is this a manufacturing error or something I need to do?!

    Hi,
    Not a lot to go by from the lack of detail in your post, however let me try to help.
    [note I may not follo up on your response - just a heads up as i'm very busy [ arent we all]]
    Anyway, I bought a HP Pavilliion 500 the other day. and was stoked - awesome machine at a great price locally.
    So after plugging in my Altec Lansing 6.1 surround sound speakers using the brown/black/green colour coded input plugs on the back of the PC's audio card (built in) - to correspond with the cables on thealtec lansing, I noticed that 2 speakers were working at the same time, and another speaker did work at all.
    I spent about an hour or 2 pulling hair until I finally turned everything off, then plugged it in, then turned n the speakers and then the PC - voila - the speakers were working, one thing I had to do though was move them around as the front right speaker was now the middle etc, no biggy - just moved the speakers around...
    PS: there was a siding button on the back n my speakers that allow full 6.1 or stereo - which I hd to change to get it to work.
    Also on the altec lansing model I have I had to adjust the surround knob on the main speaker control to #10 for surround for the speakers to work individually.
    I hope it helps you somewhat?
    Check what inputs you are using. Check the inbuilt sound control software, in my case it was DTS Audio Settings, which allowed me to tweak things a bit.
    Sometimes yes it is hardward,but when you know your have "known good speakers"as I did, and a brand new PC - which in theory should handle the speakers I am using, then it can be a combination of trial and error to get them working...
    I gues you have the latest drivers, and if you dont have any great input options (ie: if you only have headphones socket) and are using stereo - ty some headphones? - as sometimes it can be the cable socket itself which is just built slightly different so the speakers dont all come thourgh like they should...
    Cheers
    andy

  • [Software] Switch Left/Right speake

    Hi, I want to switch my front left and front right speaker output with software, because I am unable to switch them physically. Is there any way to do this?
    If its needed I am able to switch my rear speakers physically so something that switches both front and rear would be good aswell.
    I am using the Sound Blaster X-FI Xtreme Audio card with a set of X-530 Logitech 5. speakers.
    Thanks in advance.Message Edited by karozkap on 2-02-200708:3 PM

    Should I post this somewhere else? Or is it really utopia? Thks

  • No sound from front right/left speakers in 5.1 setting SB Audigy 2 ZS

    Dimension 550/E50
    XP Media Center 2005
    All current Windows Updates (SP3 & all MCE updates)
    5. surround sound was working fine until some software changes took place (however, I dont know which was directly related)
    A) Intel Chipset update from A to 7.2.2.006, A3
    1. It fixes issue with USB keyboard/mouse hang until reboot while installing.
    2. It fixes yellow bang in USB controller in Device Manager on a system with USB keyboard/mouse while installing.
    3. It fixes a bug where a 3rd party SMBus driver was being overwritten.
    4. It fixes Installshield issue with silent mode.
    5. It fixes issue in PCIUtility.sys during install on 64-bit OS.
    6. It fixes untranslated language strings.
    B) Some Microsoft AutoUpdates
    didn't discover the loss of front speakers until several updates had run. Restored back to December 08 without any improvements.
    After the chipset update, I de-installed all SB and Sigmatel drivers
    Then Re-installed the SIGMATEL STAC 92XX C-Major HD Audio driver
    and then re-ran the SB Installation CD
    still, no front r/l sound
    then, i ran the Creative AutoUpdate application and installed recommended updates.
    still no sound front l/r --
    i switched the rear l/r cable with front, so i know the speakers are fine.
    what else can i do
    how can i tell if the sound board is faulty
    Message Edited by lunde on 04-8-2009 08:32 PMMessage Edited by lunde on 04-8-2009 08:34 PM

    I used the Creative Diagnostic application's Speaker Test and after hitting Restore Defaults, the front right speaker is not as quiet, though still much quieter and muffled. Still no sound from the subwoofer.

  • MBP 17" report, occasional white noise from right speaker

    My 2.16Ghz MBP with 100GB 7200rpm drive and 1GB memory arrived a few days ago. Since then I have been installing software, running apps, and generally putting it through it's paces. I have also added a 1GB stick from Crucial. On the whole the MBP has been great, except for a few (hopefully minor) problems:
    1. It gets quite warm on the left palmrest, and gets uncomfortably hot between the keyboard and the screen. This is just during casual use, web surfing, downloading updates etc. The case temperature is about the same as my old 667MHz TiBook after it had been at 100% CPU for several hours (encoding video). I dread to think how hot the MBP will get doing something demanding.
    2. When closed the screen appears to be slightly bent, the gap at the two front corners is about 1mm wider than the gap at the latches.
    3. I have started to get hard crashes during the boot up sequence. Specifically after the grey apple I get the greyed-out multi-language reboot message and have to reboot. If I continue trying to reboot it eventually manages to get past the grey apple and boot up normally (usually this takes 2 or 3 attempts). I suspect this is due to something I've installed, possibly some Canon software for my MP750 printer.
    4. I have now heard a white noise/static sound coming from the right speaker on 5 occasions. Three of those occasions were while booting (one of them was when I first turned the MBP on! Not a good sign). The computer boots normally, but with this strange noise! The other two times where when I was launching apps. On each occasion the noise lasted about 3-5 seconds before stopping. It's more of a hissing noise, not a mooing or a whining noise. It sounds exactly like the speakers on a vinyl record player when the needle is in between songs.
    Obviously all of the issue are annoying. However I'm only REALLY concerned about item 4. Item 1 was kind of expected after doing some pre-purchase research. Item 2 is annoying in a £1800 laptop, but I can reluctantly live with it. Item 3 is frustrating but I'm sure I can 'cure' it by removing software (it only started happening after a day or two of fairly heavy use). Item 4, on the other hand, is intolerable
    Anyone have any suggestions? Advice appreciated. The nearest Apple store is about an hour away, so advice other than "take it to a Mac 'genius'" would be appreciated.
    17" MacBook Pro 2.16GHz Mac OS X (10.4.6) 2GB RAM

    Well, that was 15 minutes of life wasted typing out the above post that I'll never get back
    I was hoping for some sort of 'expert' advice from all the users here with thousands of posts. Evidently not.
    Anyway ... I have (kind of) fixed the problem myself. Resetting the power management unit almost completely solves the static noise problem. I say almost, because since resetting the PMU (about 2 weeks ago now) I have heard the static noise ONCE. This is compared to hearing it around 3 or 4 times a day prior to the PMU reset.
    This at least makes me slightly more confident that this is a software/firmware glitch, rather than a hardware fault.
    Hope this helps someone.

Maybe you are looking for

  • Iphoto or Mail automatically shrinking pics

    Hi people - I have a problem that is driving me nuts - whenever I attempt to send an image through Iphoto it is automatically compressed even though I select the option to send this file in original condition. This may not be an iPhoto problem as I w

  • In oracle 10g is the same Oracle Net Listener than...?

    Hi forum members again I'm vey new in oracle server10g, this time I have a doubt about oracle components , that is the same the Oracle Net Listner than the Oracle SQL*Net listener, if is not the same, please tell me the diference Thanks in advance

  • Manual accruals: proposal details need to flow my accounting document

    Hi I have created Manual accruals for periodic and monthly posting Created proposal as a customer number and name. Accounting doucments are generating based on the settings I need proposal details in the reference field of accounting document. coulld

  • "Show View Options" is missing

    I had all the icons on my desktop at work set to a fairly large size because it comes in handy when I'm doing photoshop stuff to be able to see a large preview of the icon. I was working on it this morning as normal, then left work to go on a shoot,

  • PSE8 - having problems applying effects via Smart Brush Tool - PLEASE HELP

    So this problem has started and it's driving me a little nuts.  It doesn't happen on every image. And it seems to only happen when i use the smart brush tool to brush on effects. Sometime when I use the tools and start selecting my area the select fr