Front Row - Not recognising DVDs

I have installed Front Row on my aluminium Powerbook, and much to my disapointment, it doesn't read DVDs. I understand Front Row isn't ment to be on Powerbooks but I was wondering if there is a way to fix it?
Any suggestions would be greatly apprectiated

Hi Christopher,
Along with installing Front Row did you install the Front Row Update? That should resolve the communication issue.
Jrsy
< This space available for rent (iPod please!!) >
That's funny, I used that line a while back, minus the iPod part..

Similar Messages

Why does front row not have simple organization?

I currently have a hard drive hooked into my macmini which is hooked up to my TV. On my hard drive I have over 1000 movies, all purchased through iTunes. However when I use front row and i goto the movie section, I have to scroll through every movie to get to the one I want. There's no way to scroll by letter, only one by one. This is horrible and takes forever. Can apple do an update that makes the right button on the apple remote for scrolling letter by letter. For example, you click the right button to goto movies starting with B, C, D, E, F, etc. Then the down button for one by one scrolling. Also, why does front row not have genres? AppleTV does. Why not incorporate that into front row? Think, Apple, Think.

You can have sub-folders in the Movies folder and arrange your movies alphabetically that way.
But if you want to alert Apple to your idea, then use this link:
Where to send product feedback to Apple:
http://www.apple.com/feedback/

Auto start Front row when insert DVD

Bonjour,
May the subjet has been already discussed, but is anyone
know an applescipt that can auto start front row when a DVD is
loaded?
Thank you

I couldn't get this suggestion to work on two different Macs. I don't think the Front Row.app is handled the same way as other applications. For example, you can't launch Front Row by double clicking on it inside the CoreServices folder.
-Doug

Why does my "HL-DT-ST RW/DVD GCC-4482B drive" not recognise DVD-R discs?

This "HL-DT-ST RW/DVD GCC-4482B" drive on my machine does not recognise DVD disks. I then remove the DVD disks and load them into another drive on the same machine where they are recognised immediately.
As the dual drive setup is very handy I'd like to have both DVDs working again.
I have been tried to update the firmware for my "HL-DT-ST RW/DVD GCC-4482B drive" but it fails to complete and this message appears: "The update did not complete successfully, (9994)"
I would appreciate any help with this issue.
Regards,
Joe

Hi RO123:
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I am sending a link to a page results for "“HL-DT-ST RW/DVD GCC-4482B" click here. You may find it useful in the mean time.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Front Row pauses during DVD play

I've played at least 5 (3 of which were brand new) different DVD's in Front Row that randomly pause during play. After a few seconds the movie continues to play. I took the computer into the store to have the optical drive replaced, but it keeps happening. I tried just using DVD player and the same thing happens. Since the drive has been replaced, now I get "skipping over damaged area" when it pauses (only in DVD player). These are BRAND NEW dvds, there's no way they can be damaged already. Any ideas, suggestions, anything???

That's interesting. Since it doesn't seem to be a hardware problem, you might use the Accounts System Preferences to create a brand new user. Log out and log in as the new user. Does the DVD Player application give you the same trouble when logged in as the new user? If not, then a preference or setting your original user has must be interfering. Or some kind of preference file corruption. If the new user does have the same trouble, it might be time to run the Disk Utility and make sure your permissions are repaired and the disk is repaired. If that still doesn't help, it may be time to do an "archive and install" of Mac OS X to get a good copy of the DVD Player application back...
-Doug

Front Row not playing Trailers or Top 10 iTunes Movies

Hoping someone might be able to help me out with this weird problem I have had for a few months (since before Leopard, but it persists since updating to 10.5.1.)
My Front Row wont play the Theatrical Trailers or iTunes Top 10 movies previews.
It happily updates the list. But whenever I click on one I get:
"The Selected Video Could Not Be Played, The Format Was Not Recognised".
I have no problems playing TV Show previews, Music Videos and my own ripped movies.
I get the same results on my Apple TV and my 18 month old intel iMac.
Any ideas ? Much appreciated.

I'm having this same problem. The only solution I've found, scouring both the forum and internet, is to wait until it figures itself out, which is completely unacceptable. I recently updated my software and still no joy.

Front Row not outputting 5.1 Dolby on new Mac Mini

I have the new model of Mac Mini and have it successfully sending 5.1 output to my receiver from the DVD player as well as couple of other apps.
However I cannot get 5.1 to work with Front Row. The files do have 5.1 encoded (a get info in iTunes shows it). But if I open the file in QuickTime Player it only shows 2 channel audio and Front Row only sends 2 channels to the receiver.
I've searched here and around the net and found a lot of conflicting info on whether or not this works and if so how to configure it. Also some indication it may be broken in the current Snow Leopard. It's pretty disappointing because I asked the guy at the Apple Store, who seemed knowledgeable about HTPC usage, specifically if I could get 5.1 output and he said yes as long as I used the right cables and my equipment supported it.
I did try a few of the tips on the 'net for how to get 5.1 out and none of them worked. Would like to know if anyone has this working under Snow Leopard.

Simple fix:
1. Launch DVD Player (it's in the Applications folder).
2. Open DVD Player menu > Preferences and choose Disk Setup.
3. In the "Audio output" dropdown box, select the internal optical output instead of "System Sound Output".
Even though DVD Player seems like a separate application from Front Row, the settings you make in DVD Player apply to both.

Front Row crashes loading DVD

There are other topics similar to this one, but not exactly, so here goes...
More often than not, I can't play a DVD in Front Row. The disk goes in (or I hit "Menu" on the remote) and Front Row loads up. I select the DVD option, it indicates its loading the DVD, then it crashes to the desktop with no error messages.
This happens with both Mac-made DVDs and regular movie DVDs. They all play fine with just the DVD player app.
Any suggestions?
Thanks.

I've actually been having the same problem.
First of all, my DVD player constantly takes forever to load a DVD and/or spits it out; then more recently, Front Row without fail will crash when a DVD ends. Even worse, lately, it won't even play the DVD after repeated attempts to start it.
It's extremely annoying and I can't figure out what to do.

DVD drive not recognising DVD's

Hi,
I've a fairly basic iMac G4 which had a standard drive CD-RW fitted.
I've swapped this for a CD/DVD drive out of another redundant iMac but cannot get it to recognise DVD's.
It spins up & mounts CD's fine.
I've done a system re-install (10.3.x as I've got this on CD-ROM) but still no joy.
Any thoughts anyone, please?
Cheers,
TT

There may be a specific replacement series of optical drive best
suited for use in those computer models, so the computer would
see the upgrade optical drive as an original SuperDrive and the
OS install DVD disc could be used to boot the Mac, among other
basic and assumed duties it should then be able to perform right.
My suggestion is to see some other sites with a parts configuration
page for various specific Mac computers and note their reference
part numbers and what kinds of firmware or other differences each
model says it has from the factory. Some brands, such as OWC
has listed as replacement parts in their esales 'other world mac'
site, should be easily spec'd out and a similar item found over there.
You should not have to try and upgrade the optical drive's firmware to
have a replacement drive work in the Mac; the correct drive just will.
The optical drive's information in the System Profiler may be of help
in trying to determine if someone has tried to upgrade firmware in
one of those, to use it in a different model computer than designed.
But from what I've read, that seldom works to change firmware on
an optical drive for use in the iMac G4 series, when it can't work.
PS: your other 2 similar posts are duplicates.
Good luck & happy computing!

Front Row not working on new MacBook Pro

Hello all,
I cannot get Front Row to work on my new MacBook Pro. I've confirmed that my Apple Remote works using iChat's video preview to see the flashing IR transmitter. I've pressed Cmnd+esc also. I've even tried to double-click on the System >> Library >> CoreServices >> Front Row app to no avail. If someone could help me, I would appreciate it. Many thanks in advance.
2.2 GHz Core2 Duo MacBook Pro Mac OS X (10.4.10) 4 GB RAM

Front Row doesn't usually open if you double-click the application in the CoreServices folder, so that's not unusual. The one troubleshooting step I might try, before calling AppleCare Support since your computer is new, would be to use the Accounts System Preferences to create a new user. Log out and log in as the new user. Can the new user open Front Row with command-esc or the remote? If so, then your original user has a preference file problem. If not, then you may need to re-install Front Row and/or Mac OS X. If your Mac is less than 90 days old, I'd call AppleCare Support and get some help from them to do that (also so they're made aware that a new computer required that in case there's an issue at the factory).
-Doug

Front Row not authenticated but iTunes is?

I've got a Mac Mini that is pulling it's library from my Mac G4. I have it so that an alias of the library file on my Mac Mini is pointing to the Library file on my G4 (which holds all my music on a software RAID array) through the network. This was working fine for about a month. Then I did a software update on my Mac Mini (which is hooked up to my stereo and TV), and now ALL my tunes (including MP3s) cannot be played through Front Row. It tells me that I have to quit Front Row, load iTunes and authenticate the song through iTunes. But iTunes doesn't have any problem playing the music! Most of these files (95%) are MP3s anyway with no DRM!!! So, I am totally confused. Any ideas?
Again, I can play the songs without any problems by using iTunes. But if I try using Front Row (much more convenient with the remote and all!!), then I get this annoying error which forces me to quit and go straight through iTunes. Both systems have the latest OS updates.
MDD G4 + Intel Duo Core Mac Mini Mac OS X (10.4.7) Flux Capacitor installed in both

I've pretty similar problem. I've a music library in Buffalo TeraStation. TeraStation is mounted and visible to Mac Mini, which is hooked to my stereo.
Most of the music was originally in the WMA Lossless. Recently I've converted them to Apple Lossless. Some music is also in lossy AAC and MP3. All music plays well with iTunes, but not with Front Row. Odd enough, I can authorize songs from iTunes one by one. They will play then with Front Row, but Front Row will forgot it later.
The primary reason to buy Mac Mini was to create a neat interface for my music collection through Mini/Front Row/Remote Controller, so I'm obviously very keen on finding a solution as well.

Front Row not marking video as watched properly

I kept hoping that this issue would be resolved with one of the point releases, but here we are at 10.6.3 and it's still the same for me, so here's the problem.
Before installing 10.6 I was running 10.5.8 and when using Front Row to watch a video (say a TV show I downloaded on iTunes) I'd watch it all the way to the end and the status circle next to it would show that it's been watched. iTunes would report the same status.
Since installing 10.6 when I watch a video in Front Row all the way, the status shows up as if it's only partially watched instead of completely watched. I'm sure the video was over since I let it play all the way through until it comes back to Front Row.
This is very annoying. Has anyone else experienced this? Is there some way to fix it? If not, I hope Apple can address this in 10.6.4.

Bump.
I have tried multiple solutions and non have solved this issue. I am rather disappointed that watching content on my AppleTV or via FrontRow does not mark the show as "watched" in iTunes. FrontRow will mark it part watched and AppleTV does not effect the watched status flag at all.
I do believe this is an iTunes 10 issue though as I only saw it after upgrading to iTunes 10.
Can anyone point me to a solution?

Front Row not marking media as watched in iTunes after viewing.

Since updating to iTunes 10 I have noted that when I watch video in Front Row that the video file is not marked as watched in iTunes even though the full clip is played in Front Row. The podcast is marked as partially watched (half a blue ball).

Bump.
I have tried multiple solutions and non have solved this issue. I am rather disappointed that watching content on my AppleTV or via FrontRow does not mark the show as "watched" in iTunes. FrontRow will mark it part watched and AppleTV does not effect the watched status flag at all.
I do believe this is an iTunes 10 issue though as I only saw it after upgrading to iTunes 10.
Can anyone point me to a solution?

Superdrive not recognising DVD

It seems I'm in a similar boat as several others in this forum. Have an eMac OSX10.3.9 with superdrive and have been burning and playing movies with no problems. In the last couple of months it will not recognise ANY DVD at all - including DVDs I have created myself and commercial movies that I have been able to previously read.
I have no probs reading CDs.
In every case after inserting a DVD it comes up with a message "You have inserted a disk containing no volumes that Mac OSX can read."
I have gone through the forum and taken up suggestions including:
updating firmware: software indicated no update required;
resetting NVRAM;
using CD lens cleaner
using Path Burn – software indicated no patch required
I've noticed there's been several postings over the last couple of months regarding this or similar probs with DVD. Is it anything to do with recent upgrades? Hope this inspires further troubleshooting - I'm pulling my hair out! Or have I missed the posting with the magical solution?
eMac Mac OS X (10.3.9) 800MHz, 78mb SDRAM, Superdrive

Hi Paula
Apparently different wavelengths are used to read DVDs and CDs. I found a lot of stuff out by reading other postings on this site, plus some extra bits from the response to this posting.
Meantime, I upgraded to 10.4.8 to no avail. Then a friend recommended booting in Safe Mode and lo and behold, the offending DVDs were read. Unfortunately, because this mode uses limited extensions, it wouldn't actually play those that were movies, but at least I could get some data from some. The DVDs also played when I booted in OS9.
They also recommended creating a new user in OSX, which I did but had the same problem. Which tends to make me believe there is some offending extension, rather than a cleaning issue - a bit of a nightmare to sort out!
May just opt for a new drive - reluctantly.
Cheers
Mrs Dynamic

Front Row not seeing ex-hard drive on network

I have an ex-hard drive connected to my iMac with an alias of it inside my movies folder. Front Row on this computer sees this alias and its content no problems.
This is my problem. I have another iMac on the network connect to my computer via Front Row. This computer can see the content of my movies folder but not the alias to the ex-hard drive.
Does anybody have an solutions to this ?

Hi BillDoor, i hink you have to make an alias on your second imac
or make an alias from the first imac movie folder and put that in the moviefolder from the second imac
rgrds
McChiel

Front Row - Not recognising DVDs

Similar Messages

Maybe you are looking for