Front Row slows when loading 'Artists' from USB Drive

Just started using my Remote and Front Row, but when I select Artists, I get a blank screen for a couple of minutes, I'm assuming while it caches everything - the problem is pretty much the same as everyone posted about in http://discussions.apple.com/thread.jspa?threadID=1412982
Wondered if there is any fix for this, or any planned update to the software?
Thanks, Dan

Dan - How have you got Front Row version 2.2.1? Is it available for download anywhere?

Similar Messages

  • Slow Wifi speed when transfering data from USB drive?

    Hello guys,
    Am I the only one to get slow WiFi speed when transfering data from USB disks or keys?
    This is the new Mac Mini July 2011 (Macmini5,2)
    Intel Core i7, 2.7 Ghz
    8 Go 1333 MHz DDR3
    Mac OS X Lion 10.7 (11A2061)
    Thanks
    Nicolas.

    Hello again,
    I'm also having this issue when using a Bluetooth Magic Mouse when downloading file. Is it a problem with the firmware or the BUS?
    Anyone have the same issue?
    Thanks
    Nicolas.

  • Front Row crashes when loading DVD

    Hey, I hope someone can help with this, I am trying to use front row to play a DVD, but after a short while front row closes. Now, as soon as i tell it to play the DVD, when it tries to load it, it just turns off. There is no unexpected closure error message or option to report or anything, it just acts like I closed it. And help or info is appreciated, thanks.

    I've actually been having the same problem.
    First of all, my DVD player constantly takes forever to load a DVD and/or spits it out; then more recently, Front Row without fail will crash when a DVD ends. Even worse, lately, it won't even play the DVD after repeated attempts to start it.
    It's extremely annoying and I can't figure out what to do.

  • 4.2.3/.4 Data load wizard - slow when loading large files

    Hi,
    I am using the data load wizard to load csv files into an existing table. It works fine with small files up to a few thousand rows. When loading 20k rows or more the loading process becomes very slow. The table has a single numeric column for primary key.
    The primary key is declared at "shared components" -> logic -> "data load tables" and is recognized as "pk(number)" with "case sensitve" set to "No".
    While loading data, these configuration leads to the execution of the following query for each row:
    select 1 from "KLAUS"."PD_IF_CSV_ROW" where upper("PK") = upper(:uk_1)
    which can be found in the v$sql view while loading.
    It makes the loading process slow, because of the upper function no index can be used.
    It seems that the setting of "case sensitive" is not evaluated.
    Dropping the numeric index for the primary key and using a function based index does not help.
    Explain plan shows an implicit "to_char" conversion:
    UPPER(TO_CHAR(PK)=UPPER(:UK_1)
    This is missing in the query but maybe it is necessary for the function based index to work.
    Please provide a solution or workaround for the data load wizard to work with large files in an acceptable amount of time.
    Best regards
    Klaus

    Nevertheless, a bulk loading process is what I really like to have as part of the wizard.
    If all of the CSV files are identical:
    use the Excel2Collection plugin ( - Process Type Plugin - EXCEL2COLLECTIONS )
    create a VIEW on the collection (makes it easier elsewhere)
    create a procedure (in a Package) to bulk process it.
    The most important thing is to have, somewhere in the Package (ie your code that is not part of APEX), information that clearly states which columns in the Collection map to which columns in the table, view, and the variables (APEX_APPLICATION.g_fxx()) used for Tabular Forms.
    MK

  • Zen X-Fi2 extremely slow when loading playlists!

    0Zen X-Fi2 extremely slow when loading playlists!?I recently purchased a Zen X-Fi2 64gb. I'd been waiting for a player of this size for a few years now but Creative was behind the power curve so I temporarily switched to an Archos 80gb. After the Archos began to annoy me I ended up just going with the Zen 32gb flash based player. It works/ed great. This new Zen X-Fi2 however is unbearably slow! I don't mind quite sometime to rebuild the library once the initial sync is done but when it takes 5 minutes to load a playlist (3000+ songs) then I get upset. It takes so long to load said playlist that the player shuts off before it has time to load all the songs. I can't even just click play right away like I could on the Zen. The only way I've been able to get around it is to tap the screen twice. Once to load the playlist (which takes forever if it's more than 00 songs) and again to play once the lengthy loading process is over with. However even then it doesn't load all the songs. I've been communicating with tech support about this with no resolution in sight. All they keep telling me is how 'normal' it is for a player to load a large number of songs. My Zen which is an MTP player syncs and plays music much faster! Is there anyway to possibly upgrade this to an MTP player?

    Hi Vokivolli,
    Almost 2 months on from your original post I see that you have received no reply from an administrator. Are these problems still persisting with your player? I have an X-Fi Style too and am experiencing the same problems. Like you I was hoping that firmware updates would address the problem. I don't think that the Style is a priority for Creative and unfortunately I don't see them bothering to solve these issues. Hope I'm wrong cos otherwise I love the X-Fi Style.

  • Computer SORTA shuts down when i unplug a USB Drive on the front. more info

    So i have a late model 05 G5 and there are 3 ports on the front of the computer. the audio headphone jack, usb, and fire wire 400 (or w/e).
    my issue is...
    When i try to unplug any, and I do mean any type of USB connection, If i unplug the USB device the computer; display turns off and the computer goes into hibernation mode.
    I press the power button. everything thing turns back on and even resumes my download.
    now the weird part...
    when I go to unplug the USB device and TOUCH the computer (meaning fingers on the USB device and touching the mesh front part of the G5) Nothing happens or everything is normal.
    my question is,
    is there a electrical charge happening when i disconnect the USB drive, when im not touching the computer and the USB device.
    this may sound weird. but no more weird to see it actually happen. thinking my computer is possesed.
    info is great. i mean its not like i prevents me from any but more info the better.
    later
    dub

    Yes, the device that you linked to is what we are talking about. Your voltage will remain constant whether or not the incoming line sags, surges or just drops out.
    However you may also want to call an electrician as you may potentially have a poor earth-neutral bond and that is not a good thing. Was everything plugged into the same power strip? Have you tried another outlet in the house/apartment to see if it is just a bad outlet?

  • Very slow when loading blackboard

    Firefox 5.0 is incredibly slow when loading Blackboard Vista for Kent State University. I don't know if Blackboard Vista loads slowly for other universities as well, but I imagine that it does. Blackboard Vista allows universities to provide content online to their students.
    I need to use Blackboard vista constantly for my classes. Though I have been an avid firefox user for 4+ years, I may have to switch web browsers if this problem is not resolved. Thank you.

    I've had this problem before on previous softwares. However, when I updated to version 2.2, the time to backup the phone is a lot less. Try updating your phone to the 2.2 software, if you haven't already. If this doesn't work, try restoring your phone, then updating the software.

  • Satellite L500-19x crashes when loading software from dvd

    Satellite L500-19x crashes when loading software from dvd. This is photoshop elements 9. Other software generally loads ok, but not always.
    Any ideas?

    Hi shownomercer,
    Have you tried the Photoshop disk in another computer to check if the installation disk is ok or not?
    What happens exactly when the computer crashes? Bluescreen?

  • Won't boot from USB Drive

    I am trying to replace my internal drive. I got a WD Scorpio from OWC and formatted and installed OS 10.6. But when I boot from the drive I get the panic screen.
    The drive otherwise behaves normally. I can see the files, etc.
    Also, strangely, the drive is only recognizable as bootable from the right USB port. That doesn't really make any sense to me.
    Please help! The OWC folks have sent me multiple drives and have really tried to get this working, but I have the same result each time. Anyone out there have a solution?
    Thanks.

    Try prepping the drive this way:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Attempting to install Windows 7 from USB drive keep receiving "No Bootable device -- insert boot disk and press any key" usb drive with windows 7 iso is inserted

    As the topic says, i am trying to install windows from a usb drive, when i click install windows and the computer reboots to install a black screen comes up with "no bootable device -- insert boot disk and press any key" the USB drive is inserted and pressing any key does nothing. Help?

    You need to follow these guides to install from USB drive
    http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed -100-working-guide/
    good luck

  • Importing Photos from USB drive, autostarting Iphoto

    In order to get my iMac to automatically start iPhoto and initiate the import process from a USB drive, does the USB drive have to have the same exact file structure of that used on my camera's SD card? When I connect a USB drive with jpegs on it, iPhoto will not automatically start.

    Why do you need it to start iPhoto automatically?
    If you really do, then format it the same as a Camera Card - FAT 16.
    Regards
    TD

  • How do i load music from hard drive to my ipod?

    how do i load music from hard drive to my ipod? I had to reset my ipod and it blew away all my music. I have a ton of music on my computer hard drive but haven't figured out how to get it to my ipod.
    Thanks

    Sync it.
    Open itunes, connect ipod, select what you want, sync

  • Tecra M2 - boot from USB drive

    Hello
    Why Tecra M2 don't have boot from USB drive in BIOS?
    Is posible implemented this function in new BIOS.
    Bye

    Hello
    Good question. You should ask this the Toshiba engineers.
    However, I agree with Terentino and you can do nothing.
    Greets

  • Booting the M60-104 notebook from USB drive - possible or not?

    Hi,
    i am using the windows XP on my hard drive(IDE ), i want to boot my pc using external usb hard drive. whenever i try to install the OS on /usb drive the first boot after copy of OS files itself fails saying, boot_device_unmountaable_fatal_error...something like this..i tried every trick i know to make this work..amazingly if i make my hard drive bootable on DOS with command.com on it..the system boots on DOS...which makes me think that the BIOS support the booting from USB drive..but none of the windows operating systems are booting from it...will any one is kind enough to solve the puzzle for me?????
    thanks
    praveen

    Hello,
    I can not say if it is supported on this notebook or not, but on some Satellite M series USB memory is a supported boot option. If you hit F2 on start up and go into BIOS then check boot, if it is supported it should be listed there. Otherwise it is not supported on this model. Hope that helps.

  • Can I install 10.6 OS X from USB drive? Imac 2008 24"

    Can I install 10.6 OS X from USB drive? Imac 2008 24"

    Welcome to the Apple Support Communities
    You can, but it's a bit difficult because you have to copy the Snow Leopard disc content to a USB drive. There are a lot of pages which have got the steps to install Mac OS X Snow Leopard from the USB drive, like this page > http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html

Maybe you are looking for

  • How to develop a setup program!

    Hi all, You all must have seen the setup program of jdkx.x.x , and how it installs java in our program. 'was just feeling inquisitive how to prepare such programs, which will install some program in the system, along with user interface!!! any highli

  • Licence for RMAN

    Hi, is RMAN licence included in DATABASE Licence or we should buy seperate licence for RMAN ? Thank you.

  • How to synchronise contact person data from customer master to Bus partner.

    Can someone please explain how we can synchronize contact persons from customer master to business partner data. Are existing contact persons of customer are automatically created as Business partners(persons) when we do the synch. Can MDS_LOAD_COCKP

  • Split the values

    Can you pls help me on this when the value in col is 765,It has to be splitted into three values 7,6 and 5 this is the below query written and seems it is not working.. begin      select length(345) into vl from dual;      FOR i in 1 .. vl LOOP      

  • IDOC invoices and multi-account PO's

    How can an invoice be processed electronically for PO's where the line item is split across multiple accounts?  We have seen situations where the invoice will only process against the first line.  Normally, to post these invoices via MIRO, the user w