Front row suddenly stopped working on MacBook

Front row wont start. I am not using it frequently, so I can't say when it stopped working. However, I can control Itues the remote works well with iPhoto too. So there doesn't seem to be any problem with the remote. But, if I press menue, front row wont start, the same if i try the apple button and escape.

Have a look around the forum before you post; you would have found the "No Front Row on MacBook Pro" thread, which contains the fix (install the 1.3.1 update).
Message was edited by: Wildatheart

Similar Messages

Front Row doesn't work on MacBook Pro 17

I just got my nice MacBook Pro 17, which includes Front Row manual and that cute remote control...
However, i could open Front Row.
Actualy, the application is not installed. I just found FrontRow.pkg inside the folder HD/Library/Receipts/FrontRow.pkg
I contact apple.com and downloaded versions there, but couldn't install anyone since the instalers claim that my computer is not equiped to run Front Row (????)
I couldn't get any support form apple.
Could anybody help me, pls?

great!
I found the same question and the SOLUTION in this forum. Thank you!.
Pity that the Macbook Pro17 SPANISH manual just says "open the Front Row application" and not how to do (holding Comand-Esc).....
Nice laptop though....
Thanks again!

Element 6 Suddenly Stopped Working on MacBook

I have not idea why the program stopped working. It won't fully launch. Tried reinstalling it and still not working. Any ideas? Other programs all seem to be working fine. I could bring the computer in for evaluation at Apple store. Not sure what next steps should be. Thoughts?

http://forums.adobe.com/message/5860819#5860819

Creative SBS 4.1 450 Speakers - Left front speaker suddenly stopped working...

Had the speakers for about 6 months with no problems.
Now the left front speaker has no sound. Specifically, it appears the left front speaker jack isn't working. No matter which speaker I hook up to it, there's no sound.
All 3 other speakers/jacks are working correctly.
Any ideas?

Try updating the cards drivers and bios then reset the bios to default after you do this and if you still continue having problems then try the system on another computer and if it works then then you know it's.
A: software setting for the other computer causing the channel not to work might want to uninstall and reinstall afterwards then update
B: your cards bad and may need a new one I recammend you audigy2 zs
Any how Good Luck!
Message Edited by RLemmon on 12-26-2004 10:08 AM

MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that. Any help on how to fix this? How do I know if it is the airport card or not?

MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
Any help on how to fix this? How do I know if it is the airport card or not?
is there anything else I can try first?
thanks

If the technician at the shop is competent, he has given you a diagnosis that should have identified the problem. You could run the Apple Hardware Test to verify the findings:
https://support.apple.com/en-us/HT201257
Note the Apple Hardware Test is not definitive.
Go to the iFixit.com and Powerbookmedic.com web sites. They have parts and installation instructions. To install an Airport card is fairly easy.
Ciao.

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck.

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine?

Why has my 8x8 desktop app on my Macbook Pro running OS X Yosimite 10.10.1 suddenly stopped working while the app on my iPhone and the online service both work fine? Is this because of some recent software update by Apple? 8x8 support acknowledges issues with no current work-arounds? The 8x8 desktop app worked until early December, then quit. I've deleted and re-downloaded the app, but no difference.

The solution is :
1. Delete iPhone configuration utility. Just drop it to the trash
2. Run
sudo rm -rf /private/var/db/receipts/com.apple.pkg.iPhoneConfigurationUtility.*
rm -rf ~/Library/Preferences/com.apple.iPhoneConfigurationUtility.plist*
3. Delete the whole folder: /System/Library/Extensions/AppleUSBEthernetHost.kext
4. Reinstall iTunes (just over the previous one)
5. Restart
incase of any issues, visit this thread: https://discussions.apple.com/thread/3725328?start=15&tstart=0

The keyboard and trackpad to my 2008 MacBook suddenly stopped working, what's wrong with it/ what should I do to fix it?

The keyboard and trackpad to my 2008 MacBook suddenly stopped working. I've restarted the computer several times and no help. I had some keyboard maintenance done a few months ago at a repair shop so I don't know if that has anything to do with it. What should I do?

First thing I would try would be to remove the battery from your MacBook, connect the computer to it's power adapter and start up, then see if the keyboard and trackpad work normally. Some older batteries have been known to expand and interfere with keyboard and trackpad. If this works, replace the battery.
Best of luck.

Why has my USB Superdrive suddenly stopped working with my MacBook Pro?

Why has my Apple USB SuperDrive suddenly stopped working with my MacBook Pro?
Normally I plug it in and insert a CD or DVD and it is immediately recognised, but today it took the DVD, made a 'whirring' noise for a few seconds and then stopped without being recognised.

Try the options on this list:
Credit Kappy.
Try 1 and 5.
Ciao.

HDMI port on Macbook Pro suddenly stopped working. How much is it to fix?

HDMI port on Macbook pro suddenly stopped working. Is it expensive to fix?

No one here can tell you what the prices are to repair things. We are just users such as yourself.
What makes you think your HDMI port is dead?
You can take it to a Genius Bar for a FREE diagnosis, make an appointment first.
http://www.apple.com/retail/geniusbar
Also check system preferences/Displays make sure that you have all the correct settings.
Check that the cable you are using is good.
Make sure the display you are connecting to is set correctly.
Check here:
http://support.apple.com/kb/ht1573
Try resettind SMC:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
. RESET PRAM:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.

Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

My MacBook charger suddenly stopped working

Could you please tell me what to do? The charger suddenly stopped working? No accident, no fluids dropped on it, no overheating etc.....The only problem I can think off is that I roll it up to store it.
Can anyone help me through the "trouble shooter" of figuring out what is wrong with it suddenly ???? Using for the moment a friends charger and my computer is charging, so its not the computer that has a problem, just the charger. Thanks for your help!
This is the charger info. It says "not connecting" but the charger is plugged in!
Battery Information:
Model Information:
Serial Number:          9G0161CT0E1MA
Manufacturer:          DP
Device name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          0002
Cell Revision:          0158
Charge Information:
Charge remaining (mAh):          5001
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          5196
Health Information:
Cycle count:          210
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -529
Voltage (mV):          12373
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Wake On LAN:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No

I've had this problem twice now. This is my second MagSafe power adapter and since my first one became strained and frayed I have taken extra care of this one. All of the sudden it stops working today and nothing seems to help.
My other one lasted nearly two years and this one that I've been taken care of has not even lasted six months.
Are they really that poor quality? I feel like something else has to be wrong here.

My camera all of the sudden stopped working. What is going on?

My camera all of the sudden stopped working. What is going on?

if by camera you are referring to iSight, here is how to troubleshoot:
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Standalone iSight cameras
The instructions in this section apply if you have an iSight camera that is not built into your computer but attaches to the computer via a FireWire cable.
Make sure the cable is completely plugged in.
Incomplete cable connections are the most common cause of hardware problems. Follow these quick instructions to make sure your iSight cable is completely plugged in.If your iSight camera continues to function improperly, continue on to the steps below.
Turn the computer and the camera off.
Unplug the FireWire cable from your computer and the camera.
Wait a few seconds.
Firmly, without forcing, plug the cable back in to the camera and the computer.
Caution: FireWire ports are keyed so the FireWire cable can only be inserted one way. Make sure you are inserting the FireWire cable into the FireWire port in the correct orientation.
Restart your computer.
If the green light on top of the iSight is not lit, turn on the camera by gently twisting the lens.
Launch iChat AV.
See if a different FireWire port works.
Some Macs have more than one FireWire port. If your computer has another FireWire port, disconnect the iSight camera from the current port and plug it into the other one. Restart your computer and test the camera before continuing to step three.
Check to see if other FireWire devices work.
If you have another FireWire device, such as a video camera or an external hard drive, try plugging it into your computer to see if it works. If your other FireWire devices work, this means that your computer's FireWire port is working correctly. If your other FireWire devices don't work, there may be an issue with your computer. Contact an Apple Authorized Service Provider for assistance.
Determine if there is an incompatibility with another FireWire device.
If more than one FireWire device is connected to your computer, there may be an incompatibility between two of the devices. To rule this out, disconnect all other FireWire devices from the computer, including external hard drives, CD/DVD drives, other cameras, and FireWire-based networking equipment, such as hubs and repeaters. If your iSight camera works normally when you remove other FireWire devices, plug them back in one at a time to isolate the cause of the issue.
Make sure the FireWire cable is good.
Follow these steps to test the FireWire cable:Information about your iSight camera should appear in the FireWire Information field. If you see the iSight camera in this field, your cable is good. Once you've confirmed the cable you are using is good, use it to plug your iSight into your computer. If the green light on the top of the camera does not light up immediately (within a second), there may be an issue with your camera. Fill out an iSight Service Request to have your camera repaired.
Important: Do not send your iSight camera for repair until you have tried each troubleshooting step.If the FireWire cable that came with your iSight camera didn't work, try another FireWire cable that you know works. If this cable works, there is an issue with your iSight's FireWire cable. If your camera is in the limited warranty period, fill out an iSight Service Request to receive a replacement cable.
Choose About This Mac from the Apple menu.
Click More Info. System Profiler opens.
In the System Profiler window, click on the Devices and Volumes option.
Click the disclosure triangle, if necessary, in the FireWire Information area.
Check to see if there is an issue with your camera.
If information about your iSight appears in System Profiler but the camera still does not work, follow these steps:Video from your iSight camera should appear on screen. If the screen is blue or black, there may be an issue with the camera. Fill out an iSight Service Request to have your camera repaired.
Open iChat AV.
Choose Preferences from the iChat menu.
Click the Video button.
Twist the front of the iSight camera lens to open the iris barrier. The green light on the camera turns on when the iris barrier is open.

USB port stopped working in macbook pro

Hi, i bought a macbook pro, OS X lion, version 10.7.4 a month ago. one of my USB port suddenly stopped working. i am a new mac user, so i have very less idea about mac. i would appreciate if someone could give me step by step solution to this problem. thanks in advance

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you have to take the MBP to the Apple store for evaluation.
You have 90 days of free tech support from AppleCare from the date of purchase.
AppleCare: 1-800-275-2273.
Best.

Mac HDMI to TV suddenly stops working

10.9.4 mavericks macbook pro retina to TV via HDMI
using an HDMI cable to watch movies on my laptop macbook pro retina.
was working this morning, and watched a movie. then I go to work, and come back and now the exact setup is no longer working.
it does not show any display in the preferences menus, and the TV is just blue without any input.
cable is secure, nothing has changed. nothing.
edit: actually I did pull the HDMI cable out while the two were connected this morning.
tried restarting, reconnecting, nothing
... very frustrating, no idea why computers suddenly stop working for no reason whatsoever. maybe someone hacked my computer this afternoon while I was gone? it's just a random failure.
Any help?

Hello JupiterSpaceport
If you are having issues with connecting to your TV, then check out the article below to look at resetting the NVRAM as well as starting up in Safe Mode to see if anything changes.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
-Norm G.

Front row suddenly stopped working on MacBook

Similar Messages

Maybe you are looking for