Front Row trailers behind a Proxy server

Hi there
Im currently at University and my internet connection is provided through a proxy server.
When i try to watch trailers in Front row it hangs and i have to reset the computer
Therefore my question is,
Is Front row aware of network settings or does it have to have a dirrect connection to the Net.
Thanks

Can you watch the trailers by going to Apple's Web site with Safari inside your network? QuickTime streams like that are specifically blocked by my work's proxy server.
http://www.apple.com/trailers/
-Doug

Similar Messages

Front Row Trailers Always the Same

Ok, I'v been using Front Row for more than a month now, but all the movie trailers remain the same, despite frequent updates on the Apple's website. There are already new movies but Front Row still feeds me with trailers of movies months old. (I tried to find other posts about this issue, but most seem to focus on non-responding servers)
How do I make Front Row update the list of trailers? Please.

I think that it's a different server that runs the Front Row trailers. Up until recently, a ot of people would do good to get any trailers at all. They still do update, just less frequently than the Quicktime site.
They are also all in HD I believe, so that might factor into the limited number of them.

Web service client behind a proxy server connecting to web service over SSL

Hi Friends,
A web service is exposed by an external system over SSL. We are behind a proxy server and are trying to get connected to web service over SSL. 
We are getting the following error on the test browser of workshop
External Service Failure: FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters.
the whole trace is 
JDIProxy attached
<Sep 24, 2005 9:27:25 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl:salesExpertServiceControl; Method=creditcheckcontr
ol.SalesExpertServiceControl.doCreditVerification(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl; Method=creditcheckcontrol.CreditCheck.testCreditC
heck(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=top-level; Method=processes.CreditCheck_wf.$__clientRequest(); Fai
lure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled process exception [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Error> <WLW> <000000> <Failure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled pr
ocess exception [ServiceException]>
I am not able to make out what could be possibly wrong. Please let me know if you guys have any ideas about how to resolve it.
Thanks
Sridhar

did you resolve this problem. I am looking at the same issue. If you did I would really appreciate your response.
Thanks.

Creating a socket behind a proxy server

How can I create a socket to a server if the client is behind a proxy server? I know java.net's HTTP-related classes have built-in proxy server support but this is not for a HTTP-based application.

Hi,
I also need to do this but not found any way yet. Somewhere I read that we can set the socket proxies (because mine was an application which tries to open socket connection over the network) through command line or by setting the system properties "socksProxyHost=<proxy_host_address>" and "socksPoxyPort=<proxy_port>". I tried to solve my proxy issue this way but all invain. While setting these system properties it is required that your proxy server is using the SOCKS service which I think is mostly the case but it still didn't work for me. You people try and c if it works for you. If anyhow you manage to get this issue resolved then please tell me also by posting a message.
regards

Can Air application connect behind a proxy server

Can Air application connect behind a proxy server using HTTP
or SOCKS.
thanks

I tried it but its not working. I am using XMLSocket
var socket:XMLSocket = new XMLSocket();
socket.connect( server, 5000 );
It returns "no response from server", It works fine if i
directly connected to internet.
My browser is able to connect to internet means all
configurations are fine.

Places look-up crashes iPhoto '09 8.1.2 when behind a proxy server

Places in iPhoto was always a problem for those imprisoned behind a proxy server, however since the 8.1.2 update this has caused iPhoto to hang forever when iPhoto tries to add new places automatically, E.G. when you plug your iPhone in.
As a work-around I deleted com.apple.iPhoto.plist from my Username > Library >Preferences folder and then told it not to look up locations automatically when it asked about it on startup.
Not ideal but it does work without hanging now!
Ideally Apple would fix the Proxy support in iPhoto...

Welcome to the Apple Discussions.
Ideally Apple would fix the Proxy support in iPhoto...
You'll have to ask Apple directly at http://www.apple.com/feedback/iphoto.html

Calling WS from WebLogic server 8.1 that is behind a Proxy server

Hi,
I have a web application deployed on WebLogic server 8.1 sp1. And my server is
behind a http proxy server. Now one of the components in the application makes
a web service call to a service located external to the system, and it always
throws "java.net.UnknownHostException". I have set the Java system properties
http.proxyHost = my proxy server, http.proxySet = true and http.proxyPort = 80
and it still does not help.
If I try to evaluate the web service component as a stand alone client using WebLogic's
webserviceclient.jar, everything works fine. I can't figure what I have to do
to get this component working from within the WebLogic server. Can anybody provide
me with inputs, comments or suggestions.
Naveen.

Found solution. Followed Part 2 of the solution as explained in http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_solution&answerpage=solution&page=wlw/S-19283.htm
What surprises me is that this solution to a common problem is hidden and hard
to find. If I am correct, no part of WLS 8.1 documentation suggests this. Rather
the doc says, set the system properties for the standard JDK 1.4 network properties
and it should work fine. If it is actually supposed to work like this, is it a
bug then?
"Naveen Kumar" <[email protected]> wrote:
>
Hi,
I have a web application deployed on WebLogic server 8.1 sp1. And my
server is
behind a http proxy server. Now one of the components in the application
makes
a web service call to a service located external to the system, and it
always
throws "java.net.UnknownHostException". I have set the Java system properties
http.proxyHost = my proxy server, http.proxySet = true and http.proxyPort
= 80
and it still does not help.
If I try to evaluate the web service component as a stand alone client
using WebLogic's
webserviceclient.jar, everything works fine. I can't figure what I have
to do
to get this component working from within the WebLogic server. Can anybody
provide
me with inputs, comments or suggestions.
Naveen.

Front Row 'Sources' not finding media server

Hi all!
I use my Mac Mini as a media server for my apple TV and all my computers/macs with iTunes.
Everything works fine apart from Front Row on my MacBook that only seems able to find my local machine under sources.
Any ideas?

You are not alone. I am experiencing the same problem.
We have consolidated all of our music and videos (much if it purchased via iTunes) onto a NAS media server. Our Macs have no problem seeing the server either from within iTunes or QuickTime Player. Yet, trying to find it using Front Row is impossible. There are no menu source options other than one's own mac or, alternatively, the iTunes Server mothership.
Either this is an oversight in the way Front Row was written, or more likely, it's some Draconian control issue decided in Cupertino.
For anyone who's acquired a lot of content (all legally, too, I might add) and stores it externally of his/her mac, this issue makes Front Row useless.

Rich-client Java application that is client to WLS6.1 but behind corporate proxy server

We have a rich-client Java application that is a client to WLS6.1 that can't
connect to the WLS6.1 server when the client is behind a corporate proxy
server. What is a remedy for this?
Thanks,
Jim Weavere

Found solution. Followed Part 2 of the solution as explained in http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_solution&answerpage=solution&page=wlw/S-19283.htm
What surprises me is that this solution to a common problem is hidden and hard
to find. If I am correct, no part of WLS 8.1 documentation suggests this. Rather
the doc says, set the system properties for the standard JDK 1.4 network properties
and it should work fine. If it is actually supposed to work like this, is it a
bug then?
"Naveen Kumar" <[email protected]> wrote:
>
Hi,
I have a web application deployed on WebLogic server 8.1 sp1. And my
server is
behind a http proxy server. Now one of the components in the application
makes
a web service call to a service located external to the system, and it
always
throws "java.net.UnknownHostException". I have set the Java system properties
http.proxyHost = my proxy server, http.proxySet = true and http.proxyPort
= 80
and it still does not help.
If I try to evaluate the web service component as a stand alone client
using WebLogic's
webserviceclient.jar, everything works fine. I can't figure what I have
to do
to get this component working from within the WebLogic server. Can anybody
provide
me with inputs, comments or suggestions.
Naveen.

ATA 186 behind windows Proxy Server

Hi Friends, i have been using Cisco ATA boxex behind Cisco routers and they work really fine. Is it possible to configure this box behind a Windows Proxy Server with a Dial-ip configuration? I know the configuration will be difficult due to NAT and H323 issue.. but any of you Experts can guide me Technically I will really appreciate..
Thank You.
Sandeep

I feel now it's possible. Please refer the following link for more information.
http://www.cisco.com/en/US/products/hw/gatecont/ps514/prod_release_note09186a0080109764.html#47964

Messages with Server 3.1.2 behind a proxy server

Help ...
I am familiar with earlier iterations of the Mac OS X server software and set up a largish 16TB system in a UK hospital before I retired. I am now working for a charity in a remote location and testing the latest version running on a recycled MacBook Pro to see if it could be used in earnest to provide local services to support the volunteer community here. Access to the internet is very slow and heavily restricted by a Squid proxy server and I find the lack of a comprehensive OS X Server manual frustrating at times (if there is one please point me to it!).
I have File Sharing running fine, but I am struggling to find the workable settings for a cross platform local messaging service. I am trying AIM initially, but whatever settings at the user end I select I keep getting either 'server refusing connections' or 'unidentified AIM socket error' messages.
Any assistance would be really appreciated ... especially as this is my foray into the world of Messages!
Thanks in anticipation,
Ian
Test system: Server: MacBook Pro running Server 3.1.2 on Mac OS X 10.9.4 Client: MacBook Air running Mac OS X 10.9.4

Since posting this I have been able to download more information and also search the ASC threads - and see I should be using Jabber.
So - I may still need some advice but I am working towards the solution ... hopefully!

Finesse Fail over behind a proxy server

As per the following link
https://developer.cisco.com/site/collaboration/contact-center/finesse/overview/technical.gsp
summary :- The gadget includes JavaScript and references to various web services. Browser can't have connections to servers in multiple domains due to security considerations so Cisco Finesse functions as web proxy so all requests from the browser use a single domain.
How does the Side A and Side B concept works when Finesse is configured behind proxy?
As per the following link
https://developer.cisco.com/site/collaboration/contact-center/finesse/overview/technical.gsp
summary :- The gadget includes JavaScript and references to various web services. Browser can't have connections to servers in multiple domains due to security considerations so Cisco Finesse functions as web proxy so all requests from the browser use a single domain.
How does the Side A and Side B concept works when Finesse is configured behind proxy?

Contact your ISP for instructions on how to obtain a direct connection.

c:redirect behind a proxy server

I have a two servers and a browser:
Browser A --------FW 1 ---------- Apache HTTP B ----- FW 2-------- Tomcat C
24.150.4.10 192.168.1.16 128.1.1.3
On tomcat, I'm using a <c:redirect url="relative.jsp" /> to forward a user to a relative URL.
The problem is when the redirect occurs, it's providing the browser with the IP Address of the Apache server as seen inside the Firewall instead of the IP Address of the firewall that is portmapped to the Apache Server (which is the IP Address that the Browser originally issued the request to.
I think this is because the redirect is not honoring the x-forwarded-host header that contains the hostname given by fw2?
Has anyone elxe experienced with this? I found this post: http://lists.fourthought.com/pipermail/4suite-dev/2003-June/001418.html which sounds like an exact match.

Contact your ISP for instructions on how to obtain a direct connection.

Can't play Front Row trailers

I tried using Spacebar and the Enter buttons but nothing seems to work. It still loads but I just can't play it. How can I fix this?

I got the same problem. There were no changes in the system.
Somebody got an idea?

IOS5 software update behind proxy server

Hi there.
Have updated both iPhone and iPad to version 5.0.1 (using itunes) and have noticed the new software update feature inluded wiht v5.
this works on the iphone when connected using a 3g connection, and on both when they are connected to my home wireless network, but on both devices it will not work when connected to my work network which uses a proxy server to connect to internet - comes up with "unable to check for update. An error occurred while checking for a software update."
please advise how to get software update working behind a proxy server.
David

You're right.
The position of the IT service of my customer is to say that the iPad is a very high quality product for personal use but it's a nightmare for using in enterprise. It has to work with their proxy as it is now. The idea is to integrate with the existing, not modify things to deal with iPad. At least at a pilot stage. In the same way, it's not possible to define exceptions in the proxy... That makes laughing the staff.

Front Row trailers behind a Proxy server

Similar Messages

Maybe you are looking for