Front sound inputs no longer work! PLEASE HE

I installed a Sound Blaster Audigy SE a week ago after my motherboard sound card shorted out in a thunderstorm. It was a Realtek AC97. When I installed my Sound Blaster, the front inputs (line-in, mic, and headphones) on my Compaq Presario didn't work anymore. I opened the computer again to see if there was any way of disconnecting them from the motherboard and hooking them up to the Sound Blaster, but I couldn't find any plugs that fit the jacks on the Sound Blaster. I'm running XP home on a Compaq Presario SR403WM. Can any one help? It would make my life SO MUCH easier!

Test again in a different user account with a small test library. Does it still not work for a different user after reinstalling?
And test in your regular account with a small test library.
is it possibly something to do with an incombatiability between the new update and a plug-in?
Which plug-ins are you using? Are they all compatible with Aperture 3.4 and Lion?
Aperture 3.4 and later: Some third-party plug-ins are no longer compatible

Similar Messages

Front sound inputs no longer work! HE

I installed a Sound Blaster Audigy SE a week ago after my motherboard sound card shorted out in a thunderstorm. It was a Realtek AC97. When I installed my Sound Blaster, the front inputs (line-in, mic, and headphones) on my Compaq Presario didn't work anymore. I opened the computer again to see if there was any way of disconnecting them from the motherboard and hooking them up to the Sound Blaster, but I couldn't find any plugs that fit the jacks on the Sound Blaster. I'm running XP home on a Compaq Presario SR403WM. Can any one help? It would make my life SO MUCH easier!

I used a UVC-compliant USB Logitech camera (the
Fusion) driverless
under OS X 10.4.9.
FWIW, none of these devices are actually driverless. They rely on drivers either supplied separately by some company (not necessarily the vendor of the product) or bundled into the OS. Usually, the bundled drivers are based on open standards like UVC mentioned in the link. Apple writes a lot of the bundled driver code itself but some of it comes from outside sources like LSI or Intel.
An unfortunate fact of life is that open standards are not always as well defined as they ideally should be. Another is that certain companies sometimes set their own standards that aren't quite compatible with open ones, sometimes to implement real or imagined improvements on an open standard, sometimes to gain a marketing advantage.
The good news is that the market usually -- eventually -- favors the open standard. The bad news is that it often takes some time for this to happen, leaving users -- particularly Mac users, who still represent a smaller market force than those using Windows -- without a solution for an uncomfortably long period of time.
Your best or only recourse for now may be to downgrade to 10.4.9 until this gets resolved, but you should also take into account that not all users are having these problems so it may be something other than the update itself that is causing the problem. I just video chatted with a colleague using an Intel Mac mini who is having no problems whatsoever -- we are both puzzled why he is unaffected while others are.
Sorry this couldn't be of more help.

IMac sound is no longer working- help?

This morning i turned on my iMac and the sound is no longer working. When i turn on the computer the start up chime in audible, but after that nothing can be heard through itunes, safari, or anything. When i hit the volume keys on my keyboard it shows that the volume is maxed and underneathe there is a circle with a cross through it. I first tried to resolve the problem by going into system preferernces and disconnecting my keyboard from bluetooth and then reconnecting. That didnt work, so i then put my computer to sleep, then restarted it, then shut it down. Still nothing has changed. I followed this up by resetting the SMC and PRAM, but that also has done nothing. Im not entirely sure what to do! If someone could help me out thatd be great. I feel like there should be a simple solution to this problem, but im just missing it!

Reset the SMC and PRAM each at least 2-3 times. I don't know where you got instructions for these resets so please navigate to Intel iMac SMC and PRAM resets for correct instructions just in case.

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone.

I updated to Mountain Lion and now my Parallels application no longer works; please help! What to do???

I updated to Mountain Lion and now my Parallels application no longer works; please help! What to do???

Make sure you have the latest version of parrallels. Think older versions are not compatible.

Link to A folder View in a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

Linking to a Folder View of a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

Audio Inputs no longer work after upgrade to 10.4.10

Anyone else having trouble with audio inputs after upgrading to 10.4.10? Here's my deal:
MacPro dual 2.66, 4GB RAM, running 10.4.10 as of this morning.
Upgraded to 10.4.10 today and the mic on my Plantronics USB headset quit working. 'Phones still work. Here's what I did:
1. Tried multiple audio input devices. None work.
2. Tried all USB ports, problem persists.
3. Tried the 1/8" audio input, problem persists.
4. Zapped PRAM, problem persists.
5. Called AppleCare and they had me do an Archive and Install on the system software, which installed 10.4.7 and the problem went away. Then, at their suggestion, I let Software Update reinstall 10.4.10 and the problem came back.
6. Rebooted the system from a 2nd internal drive running 10.4.9 and the problem went away.
Seems pretty clear to me that this issue is with the OS, yet Apple's support staff insists the problem is "with the data on my boot drive". Thing is, the data on the "problem" boot drive consists of exactly the same applications on the other drives, and only those applications. There ** is no ** data on the boot drive other than the OS and some applications. Yet the other drive I can boot from that runs 10.4.9 and doesn't cause audio input issues contains all sorts of junk.
So, to reiterate, I'm booting from a clean boot drive with nothing but OS 10.4.10 and some pro applications on it and the audio input won't work. I boot from into any other Mac OS on this drive or any other and all is well. Yet this problem is supposedly with my data?
Is anyone else out there seeing issues like this?

I used a UVC-compliant USB Logitech camera (the
Fusion) driverless
under OS X 10.4.9.
FWIW, none of these devices are actually driverless. They rely on drivers either supplied separately by some company (not necessarily the vendor of the product) or bundled into the OS. Usually, the bundled drivers are based on open standards like UVC mentioned in the link. Apple writes a lot of the bundled driver code itself but some of it comes from outside sources like LSI or Intel.
An unfortunate fact of life is that open standards are not always as well defined as they ideally should be. Another is that certain companies sometimes set their own standards that aren't quite compatible with open ones, sometimes to implement real or imagined improvements on an open standard, sometimes to gain a marketing advantage.
The good news is that the market usually -- eventually -- favors the open standard. The bad news is that it often takes some time for this to happen, leaving users -- particularly Mac users, who still represent a smaller market force than those using Windows -- without a solution for an uncomfortably long period of time.
Your best or only recourse for now may be to downgrade to 10.4.9 until this gets resolved, but you should also take into account that not all users are having these problems so it may be something other than the update itself that is causing the problem. I just video chatted with a colleague using an Intel Mac mini who is having no problems whatsoever -- we are both puzzled why he is unaffected while others are.
Sorry this couldn't be of more help.

Divx and other media related plugins always crash and/or no longer work, please help

Why is nothing of divx seems to work anymore? Every time i try to watch a video online using a divx site or site that uses a divx player, i get the message
"divx plus web player pluging has cashed, send crash report"
I send it - then am offered the option to reload the page once reloaded a press play the player then says connecting and then crashes again!!!
FF this is ridiculas!!
None of the divx plugins are recognised anymore and the divx web player add on is marked as incompatible, and there is not an option to enable it! When i click on the '''bold text'''more '''bold text'''option all that apears is the link to website where you download the exact same up to date version that you already have.
im using windows vista home basic 32-bit operating system, & the new version of firefox.
Its really annoying that these extensions and plugins no longer work crash and/or are no longer recognised espcially considering firefox insisted we upgrade for security issue etc and that 3.6 wont be kept up to date any more, I want reinstall the 3.6 version but am worried about security issues now.
will the divx plugin and addon/extension be added to this new version anytime soon if not what can i do to enable me to watch videos without the plugin crashing ? (i have updated all the pluggins but the problem still occurs) ?

I am having the same problems as well. Every time I turned around there was a new version of Firefox 8.0. Prior to the constant updating of Firefox I was able to watch movies from Stagevu and Veehd and now because of the new Firefox I cannot watch any movies. I also tried the VLC plugin and that constantly crashes as well as the DivX Web Player. I read so many complaints and no one from Firefox or any of the other browser is giving any of their constituents or customers whatever you want to call us any solutions to the problem and I am beginning to get a little frustrated. I have tried all of the other browsers like the Internet Explorer and Google Chrome and I still come up with the same problem.

Firelight 80 GB no longer working, please help!!

hi.
my firelight external hard drive is no longer working. the light is on, i hear the motor working but it is not registering on my mac.no icons appear.
do i have to download some new drivers? if so where from and what is its name?
thanks for your help.
joel

Hi Joel,
A couple of things we can try...
1.) If you open Disk Utility, do you see the hard drive there?
2.) If you open System Profiler, do you see the drive present on the device tree bus?
What type of drive is it, USB or FireWire?

HT4972 i have an ipad version 5.1.1 and my ibooks no longer works. please help there are pdf docs i would like to read

I have an ipad, version 5.1.1 and ibooks no longer works, i have followed advice re restarting etc but no joy. is there a way i can send the contents somewhere and retieve them especially pdf's? i have synced with itunes and they are not accessible with my laptop. any advice would be gratefully recieved.

The latest version of iBooks in the App Store will not work with iOS 5.1.1.
However, you can download a compatible version of iBooks onto your iPad as shown here:
http://support.apple.com/kb/HT5919

HT1895 Sound is no longer working...Help Please.

I also can't watch video's or Youtube..Any suggestions please

Have you had any Headphones or speakers plugged in lately?
Does Sound show in System Preferences?
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

Analog inputs no longer working on Audigy 2 ZS Platinum Pro's external dr

I have an Audigy 2 ZS Platinum Pro. After two years of use without problems, the analog inputs on the external dri've have stopped working. I get no signal from them, not even noise. All 3 inputs are silent, Line in / Mic and Line 2 in the front, and Line 3 in the back. Otherwise the dri've appears to function normally - I get output from the headphone jack, and the volume control knob works. I have not tested digital inputs or outputs, as I currently have no digital devices to connect to them.
I had made no major changes to my computer - software or hardware - when the problems began. I recently added a new SATA hard dri've, but the Audigy dri've did work after that.
I've taken steps suggested in another thread on this forum and uninstalled all Creative software and drivers, used the latest driver package's uninstall program as well as Driver Cleaner, and finally manually deleted everything related to Creative and Audigy from the system registry (and rebooted quite a few times in between). I then installed the original drivers from the CD that came with the sound card (a setup that has worked before), but still the problem persists.
Any ideas on where to even begin looking for a solution? I find it hard to believe that it's a hardware problem, since three inputs suddenly went silent at the same time, and no other connections were affected. Yet I've done as clean a reinstall as possible, and that hasn't solved the problem.
My current computer configuration:
OS: Windows XP Pro (SP2 and all latest updates)
CPU: Athlon XP 500+
RAM: 2x 52 MB
Motherboard: Abit AN7 (integrated sound chip disabled)
Video card: Sapphire Radeon 9800 Pro
Network card: D-Link DFE-530TX
Hard dri've : Seagate ST320026A, 20 GB IDE
Hard dri've 2: Maxtor 6L080J4, 80 GB IDE
Hard dri've 3: Seagate ST330083, 300 GB SATA-II

I don't have a Platinum Pro or the dri've, but a general hardware troubleshooting step I would take would be to remove the soundcard and either move it to another slot or re-seat it. Also, I'd disconnnect and reconnect all cables to and from the card and the dri've. If I had another machine I could try the card or dri've in, I'd do that. If I could borrow another dri've or even another card, I'd test those too. (Swapping parts is often the simplest diagnostic.) Yeah, maybe it's not a hardware problem, but I'd take these steps just to rule out some possibilities.
Edit: And if you can remove or disconnect the SATA dri've and restore the system to the condition before you installed it, that's another good test.Message Edited by Katman on 2-8-2005 2:56 AM

My sound is no longer working, how can i get it to work again?

My Macbook Pro sound drivers are no longer operating, everytime I turn on my laptop a message appears on the screen asking me to stop using headphones and after I click "stop using headphones", there is no sound, my volume levels show a bold mute sign indicating that there is no sound driver. If someone has knowledge in regards to this and potentially are capable of resolving this, please notify me at once as I am impatient of hearing no sound to play music and want my sound drivers to operate once again. Thank you.

Just to clarify, it only works when the phone is plugged in and charging. What happens when you try to activate it? Is there any error message?

FW800 and FW sound card no longer working. Mmmmm

My iMac has just stopped working with my firewire Edirol FA66 sound card. It has worked for years but now the iMac refuses to see it. I spoke to Apple Care this morning who ran me through a few things but didn't help. Having said that, my FW800 Sandisk card reader DOES work OK.
To through a spanner in the works, the sound card works fine with my MBP with the same lead and the same 10.8.4 OS.
A second call to AC this afternoon, after checking my MBP worked OK, was a wasted call. Sadly he didn't have a clue and kept pointing me in the direction of divers... for WINDOWS!!!
Anyway, I'm confused.com. Please can anyone help me?

JonHob wrote:
My iMac has just stopped working with my firewire Edirol FA66 sound card. It has worked for years but now the iMac refuses to see it. I spoke to Apple Care this morning who ran me through a few things but didn't help. Having said that, my FW800 Sandisk card reader DOES work OK.
To through a spanner in the works, the sound card works fine with my MBP with the same lead and the same 10.8.4 OS.
A second call to AC this afternoon, after checking my MBP worked OK, was a wasted call. Sadly he didn't have a clue and kept pointing me in the direction of divers... for WINDOWS!!!
Anyway, I'm confused.com. Please can anyone help me?
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

Front sound inputs no longer work! PLEASE HE

Similar Messages

Maybe you are looking for