Frontier mail send fails frequently

Neither of our Macs will send mail via our Frontier mail ISP accounts (POP3/SMTP). Mail send broke Dec. 24-25, started working again Dec. 26-27, and has been broken since Dec. 28. Windows computers running Outlook work, and Frontier's Webmail works. We have checked settings repeatedly both ourselves, and with Frontier support personnel. Nobody has been able to identify the problem. Frontier outsources its email to Yahoo, so changes at Yahoo could be causing the problem.
Has anyone else seen this pattern? Any suggestions on further debugging steps?

Neither of our Macs will send mail via our Frontier mail ISP accounts (POP3/SMTP). Mail send broke Dec. 24-25, started working again Dec. 26-27, and has been broken since Dec. 28. Windows computers running Outlook work, and Frontier's Webmail works. We have checked settings repeatedly both ourselves, and with Frontier support personnel. Nobody has been able to identify the problem. Frontier outsources its email to Yahoo, so changes at Yahoo could be causing the problem.
Has anyone else seen this pattern? Any suggestions on further debugging steps?

Similar Messages

  • Frontier mail send problem

    I Can receive  mail using the mail app but can not send it. Seemed like it ran fine before IOS upgrade to 7.1.2
    FRontier support sent all the settings for incoming and outgoing mail. I have DSL . tried to set up additional outgoing servers but had no luck.  Frontiers uses POP3

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    Error: “Server Unavailable” when accessing Yahoo on iOS devices
    https://help.yahoo.com/kb/mobile-mail/error-server-unavailable-accessing-yahoo-i os-devices-sln8834.html?impressions=true
    Unable to Delete eMail Messages
    http://support.apple.com/kb/TS2475
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to Attach Photos and Videos to Emails on an iPhone or  iPad
    http://www.wikihow.com/Attach-Photos-and-Videos-to-Emails-on-an-iPhone-or-iPad
    iPad Basics: Sending an Email With An Attachment
    http://ipadacademy.com/2012/03/ipad-basics-sending-an-email-with-an-attachment
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Send Multiple email Attachments from your iPad or iPhone
    http://ipadacademy.com/2014/03/how-to-send-multiple-email-attachments-from-your- ipad-or-iphone
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email! Mail Client with Attachments and Cloud Services
    https://itunes.apple.com/app/group-email!-mail-client-attachments/id380690305?mt =8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • IOS 6 and Exchange (mail) send fail

    Hi all...
    Have this peculiar problem...
    With Exchange account on my iPhone using iOS6, for some reason sending (or replying to) exchange server mail results in message send failure when using Wi-Fi. The rror message does not give a detailed reason for why it failed, it just says it failed.
    I noticed that if I turn Wi-Fi off, and then re-send the message (over 3G), it goes through fine.
    This behaviour did not happen with iOS5, and all settings are the same.
    Does anyone have a clue what might be wrong?
    Cheers...

    Not quite. Doing the reset procedure where I deleted my home network, shut down my iPad, restarted my iPad, and then reattached to my home network restored my Exchange connectivity which was my initial problem. What I was trying to find out when I got to my office was whether or not after my iPad acquired my office WiFi network if I still had Exchange connectivity. If I did not, I was going to do the same procedure of deleting, restarting and reacquiring but it appears that you only need do that once and it clears the WiFi/Exchange connectivity issue for any WiFi network that the iPad connects with.

  • Mail send fails then succeeds

    I have my mail set up on IMAP accounts on both godaddy and gmail. Occasionally, I'll get a message saying that mail cannot send using the account (account name). When I press try again with selected server, using the same account, it succeeds. Anybody have a similar problem/solution.

    Same problem - I succeeded funnily when attaching any file to the post.
    otherwise the mail is rejected for:
    ---quote---Content-Type: text/plain
    Content-Transfer-Encoding: 7bit
    Mime-Version: 1.0 (Apple Message framework v929.2)
    Subject: test
    Date: Wed, 12 Nov 2008 20:57:40 +0100
    X-Mailer: Apple Mail (2.929.2)
    READ Nov 12 20:57:40.530 [kCFStreamSocketSecurityLevelNone] -- host:195.3.96.71 -- port:25 -- socket:0x1cc3c4f0 -- thread:0x15bd6b40
    554 mail server rejected message: spam detected (#5.3.0)
    ---unquote---
    attaching any file, picture, pdf over 50 K solves the problem.
    Call me crazy but that works for me 100%
    Before I got only 5% sucess.
    I dont know why - but thats not the point...

  • To send a mail for failed login attempts,.

    We have to implement the mailing system in linux.,to send the mail regarding failed login attempts and ip address of user who attempted the failed login.,any one have the idea on this?
    Regards.,
    Vaaru

    Running an old beta version of RHEL is a bad idea. If you are concerned about security and operation of your OS I suggest to use a more recent release version. You can download, install and use Oracle Linux for free.
    Mail processing of failed login attempts is not a good idea and to my knowledge there is no such built-in system setting. I suggest you read the standard documentation or search the Web for information on how to set up a mail system. You will probably need to create a custom script to process failed login attempts.

  • Yosemite mac mail drowning in mail delivery failed messages I didn't send!

    babs bellNov 14, 2014 7:03 PM
    Since upgrading to Yosemite, I am getting hundreds (tens of thousands this week!) emails that read:
    From: Mail Delivery System
    Subject: Mail delivery failed: returning message to sender
    But I didn't send any of the emails! I've spent this entire week deleting them, working on phone with my server who claims to have fixed it (NOT!), and 5 hours on phone support with Apple today. Still happening. There must be a setting that is screwed up in Yosemite, eh? Who can help me? Using Mac Mail on Mac Book Pro. I'm drowning here! GLUG. Thanks!
    Edit

    Did all of that with Apple and they nor my server thought this was the problem, nor did they get it resolved. I'm wondering if there's a rule in Mail preferences that I accidentally deleted that could be the cause. There were two rules and neither made any sense to me but as soon as I deleted the first one, I realized I probably shouldn't have. And there's been a huge problem since...not sure that's why but I must find the resolution. I did have genieo somehow installed so Apple got it uninstalled and did tons of things to my system to clean this and that. BUT the problem remains. If you use mac mail and Yosemite, can you check the two rules that automatically were in the mail preferences window to tell me what rule I deleted? Thank you so very much!

  • "Mail Delivery Failed:returning message to sender" recipients not familiar

    I am getting a "Mail Delivery Failed" message. The address' that failed are to recipients I am not familiar with and have not tried to email. Has my email been hijacked?

    I'm getting the same problem ... only it happens to anyone who sends a message TO me. This only happens on my .mac address --- not other email addresses that I use. It's as if the .mac smtp code is ADDING a bcc to any message sent to me! All the comments to date have been less than encouraging - surely SOMETHING can be done about this! No?

  • I am having difficulty sending attachments.  The exclamation comment is"outgoing mail server failed". What should I do?

    I am having difficult time sending photos  it shows they are sending but then an exclamation point appears and it says "the outgoing mail service failed". Then it adds other outgoing mail servers could be added  I have no idea how to do that.

    Versuche es mal ohne express vi s
    Eine Whileschleife, dessen Zähler Du als Zeitbasis verwendest,
    Sinusfunktionen als Signalquellen, g .....  ups english forum
    Try it without express vis
    a while loop with the index as timebase (multiply by your timestep to get t)
    sinus functions with 2 Pi  t  as signals
    In your vi in every interation of the while loop you generate an array of values where you always pich the same index   ...
     PS: here is my version
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • Through alert Cannot send mail (system failed)

    hi,
    i am trying to send a mail based on a event alert.while the event alert runs i am getting the error .
    APP-ALR-04102: Internal SQL error occurred. (ROUTINE=alssmn_wf_jmailer) (FILE=alr/lib/alssmn.c) (LINE=1462)
    APP-ALR-04131: Cannot send mail (system failed) (ROUTINE=alssmn_wf_jmailer) (FILE=alr/lib/alssmn.c) (LINE=1513)
    APP-ALR-04124: Oracle Alert was unable to deliver your message (ROUTINE=alssmn_email) (FILE=alr/lib/alssmn.c) (LINE=377)
    To: [email protected] (ROUTINE=alssmn_email) (FILE=alr/lib/alssmn.c) (LINE=379)
    Subject: Alert Test in vision (ROUTINE=alssmn_email) (FILE=alr/lib/alssmn.c) (LINE=381)
    anybody can help me where i am missing..
    regards,
    kumar

    Bump... Bueller?

  • Mail Sender - charset detection failed

    All,
    my scenario is:
    mail sender, xml file attached to send mail (by useing adapter module, attached xml is used as message body). message is transferred to R/3 via ABAP proxy receiver.
    while test, i got the following ERR msg:
    "......charset detection failed".
    how can i determine required charset (and what charset should be used)?
    note:
    i far as i know, i can not predict what would be the charset used by the sender.
    the attached xml is generated by Adobe Interactive Form - can the charset be determine by the adobe?
    looking forward for your replays.
    Regards
    Uri
    Edited by: uri karagila on Jan 21, 2010 11:04 AM

    > how can i determine required charset (and what charset should be used)?
    Use UTF-8 for ABAP proxy.
    Change the charset inside your adapter module.

  • Thunderbird Issue. Thousands of inbound e-mails from "Mail Delivery Failed" from people to whom I've never attempted to send an e-mail.

    All inbound e-mails are going directly to "TRASH" how do I fix this? I also have has thousands of inbound e-mails from "MAIL DELIVERY FAILED" involving people to whom I have never attempted to send an e-mail. Whats the cure? I have to use Time Warner as an internet connection and there is a duplicate of about half of what I'm getting in inbound traffic on Thunderbird.

    The inbound is Backscatter see http://en.wikipedia.org/wiki/Backscatter_%28email%29
    The trash issue is most likely the SPAM tool that comes with your anti virus program. Try disabling the tool in the anti virus suite and see how you get on.

  • How can i read only .txt file and skip other files in Mail Sender Adapter ?

    Hi Friends ,
                       <b> I am working on scenario like , I have to read an mail attachement and send the data to R3.</b>
                        It is working fine if only the .txt file comes.
                      <b>Some times ,html files also coming along with that .txt files. That time my Mail adapter fails to read the .txt file.</b>
                       I am using PayLoadSwap Bean and MessageTransformBean to swap and send the attachment as payload .
                         <b>Michal as told to write the Adapter module to skip the files .But i am not ware of the adapter moduel . If any blogs is there for this kind of scenarios please give me the link.</b>
                           Otherwise , please tell me how to write adapter module for Mail  Sender Adapter?
                      How to download the following
                        newest patch of XI ADAPTER FRAMEWORK CORE 3.0
    from SAP Service Marketplace. Open the file with WinZip and extract the following
    SDAs:
    &#61589;&#61472;aii_af_lib.sda, aii_af_svc.sda
    &#61589;&#61472;aii_af_cpa_svc.sda
                        I have searche in servive market place .But i couldn't find that . Can you please provide me the link to download the above .
                      If any other suggestions other than this please let me know.
    Regards.,
    V.Rangarajan

    =P
    Dude, netiquette. Messages like "i need this now! Do it!" are really offensive and no one here is being payed to answer anyone's questions. We're here because we like to contribute to the community.
    Anyway, in your case, just perform some search on how you could filter the files that are attached to the message. The sample module is just an example, you'll have to implement your own. Tips would be to query the filename of the attachments (or maybe content type) and for the ones which are not text, remove them.
    Regards,
    Henrique.

  • MAIL Sender adapter going in to error

    Hello Experts ,
    We have configured one mail sender adpater with a custom module to read the attachements in the email message. This was working fine before.
    We recently had a restart of the PI servers. After that the channel is going in to error. The first error as per NWA logs is :
    failed to call the adapter engine; caused by javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.mail.ejb.XIMailAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.mail.ejb.XIMailAdapterBean@243be1e1 for bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: javax.ejb.CreateException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Failed to load messages into Queue AFWSend from database. Reason: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection. Reason: the thread of component "ejbContexts/sap.com/com.sap.aii.adapter.mail.app/com.sap.aii.adapter.mail.ejb.jar/XIMailAdapterBean" in application "sap.com/com.sap.aii.adapter.mail.app" is currently associated with a restricted resource set and it is not allowed to get connection within it.
    After that whenever it is trying to process a message its throwing the below error :
    exception caught during processing mail message [588]com.sap.aii.af.lib.mp.module.ModuleException
    Has anybody faced thsi error before? Please help!!!
    Thanks

    Hi VR
    Have you tried swapping by Payload name?
    Please try it out with the following configuration, and remove any extra lines - there are duplicate key names and values in your configuration.
    You should be able to see the successfully swap by payload name in the audit log as shown below.
    Rgds
    Eng Swee

  • Error in mail sender channel : invalid sequence number

    Hello all,
    I'm having the following issue.
    I'm using the mail adapter to get messages from a mail server, which are attached to the mail.
    This interface is already productive, and is working fine most of the time.
    Only frequently I get the following error, which can be found in the java log.
    exception caught during processing mail message[630];
    java.io.IOException: the specified message not found: -ERR invalid sequence
    number
    This error seems only to appear when there are a lot of mails to be fetched.
    All the mail is read into PI and processed succesfully, only I also get a lot these errors.
    Does anyone know what causes this error?
    I also don't know where this sequence number is coming from, and what's the meaning of this.
    Is it possible it's trying to read the same mail more then once?
    The settings in the mail sender channel are:
    - transport protocol : POP3
    - message protocol : XIPAYLOAD
    - Use mail package : enabled
    - content encoding : none
    - Keep attachments : enabled
    - QOS : exactly once
    - Set adapter specific message attibutes : enabled
    The PI version is 7.01
    Thanks a lot in advance for the replies on this question.
    Kind regards,
    Marco van Iersel

    Hi
    Well we have used it with POP3 and it is working in the way as it should be.
    This feature is recommended  by sap when the number of emails to be read is large.
    You can set this additional parameter to restrict the number of mails fetched by sender mail adapter in one polling interval.
    Sometimes the mailbox configured for the sender mail adapter contains large number of unread mails, which exceeds the average expected number of mails in one polling interval. In such a case, processing of all the unread mails in the same polling interval by sender mail adapter degrades the system performance. To avoid this, set value of this parameter to the maximum number of mails to be fetched and processed in one polling interval. The remaining mails exceeding the limit would be processed in the next polling interval.
    That's why I have asked you to give it a try.

  • Mail-Sender-Adapter, FetchReport

    Hello,
    can anyone explain me how to use the FetchReport option in the Mail-Sender-Adapter?
    In the Adapter-Audit-Protocol the Adapter I always get an error.
    The SAP-Help pages are not very helpful, an in SDN there are no articles about this.
    kind regards
    Thorsten Gawantka

    Hi Chris,
    the Definition is imported already.
    Here are the message-data:
    Message-Daten
    Attribut     Wert
    Status     fehlerhaft beendet
    Wiederholbar     Nein
    Beendbar     Nein
    Fehlerkategorie     XI_J2EE_ADAPTER_XI_HANDLER
    Fehlercode     CALL_CONSUMER_ERROR
    Start     30.04.2008 13:27:03
    Ende     30.04.2008 13:27:03
    Sender-Partner     
    Sender-Service     opx
    Empfänger-Partner     
    Empfänger-Service     
    Interface     http://sap.com/xi/XI/Mail/30
    FetchReport
    Quality-of-Service     Best Effort
    Message     5b2e4a20-16a8-11dd-c67c-00145e36a4e4
    Referenz     
    Konversations-ID     
    Version     0
    Bearbeitet     Nein
    Serialisierungskontext     
    Richtung     OUTBOUND
    Message-Typ     Call
    Profil     XI
    Verbindung     Mail_http://sap.com/xi/XI/System
    Transport     HTTP
    Endpunkt     http://op-sap-xi:8000/sap/xi/engine?type=entry
    Berechtigung     SAPPasswordCredential(PIAFUSER):password=********:sapclient=001:saplang=
    Sequenznummer     0
    Anz. Wiederh.     0
    Fehlg.     1
    Wiederh.     0
    and the audit-protocol:
    Audit-Protokoll für Message: 5b2e4a20-16a8-11dd-c67c-00145e36a4e4
    Zeitstempel     Status     Beschreibung
    2008-04-30 13:27:03     Erfolgreich     Mail: calling the module processor for channel CC_AeroDB_Mail_Send
    2008-04-30 13:27:03     Erfolgreich     MP: Tritt in den Modulprozessor ein
    2008-04-30 13:27:03     Erfolgreich     MP: Lokales Modul localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean wird verarbeitet
    2008-04-30 13:27:03     Erfolgreich     Mail: message leaving the adapter (call)
    2008-04-30 13:27:03     Erfolgreich     Die Anwendung versucht eine XI Message synchron zu senden über Mail_http://sap.com/xi/XI/System
    2008-04-30 13:27:03     Erfolgreich     Versuch die Message in die Call-Queue zu stellen
    2008-04-30 13:27:03     Erfolgreich     Message erfolgreich in Queue gestellt
    2008-04-30 13:27:03     Erfolgreich     Die Message wurde erfolgreich aus der Call-Queue abgerufen
    2008-04-30 13:27:03     Erfolgreich     Der Status der Message wurde auf DLNG gesetzt
    2008-04-30 13:27:03     Fehler     XI-Systemfehler erhalten. ErrorCode: NO_RECEIVER_CASE_BE ErrorText:   ErrorStack: No receiver could be determined
    2008-04-30 13:27:03     Fehler     Rückgabe synchroner Fehlerbenachrichtigung an rufende Anwendung: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:.
    2008-04-30 13:27:03     Fehler     Die Übertragung der Message über http://op-sap-xi:8000/sap/xi/engine?type=entry ist fehlgeschlagen, weil: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
    2008-04-30 13:27:03     Fehler     Der Status der Message wurde auf FAIL gesetzt
    2008-04-30 13:27:03     Fehler     Zurück zur Anwendung. Ausnahme: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
    2008-04-30 13:27:03     Fehler     Mail: error occured: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
    2008-04-30 13:27:03     Fehler     Mail: error occured: com.sap.aii.af.mp.module.ModuleException: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE: caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
    2008-04-30 13:27:03     Fehler     MP: Ausnahme aufgetreten mit Grund com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
    2008-04-30 13:27:03     Fehler     Mail: failed to call the module processor: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
    Now the question is, how do i define the receiver in an asynchrounious scenario? And what does the FetchReport option exactly?
    thx for your help
    Thorsten

Maybe you are looking for