Frozen After Login
I am running Tiger on my Powerbook and when I tried to log in things started normally-first the grey apple screen followed by the blue Mac OS login page-until I put in my password. The log in begins and my wallpaper is displayed followed by the Spotlight logo in the top right corner, but there things freeze. The rest of the top bar does not show up nor does anything else. The mouse works but if I put it over the Spotlight logo I get the rainbow dial telling me something is going on.
I ran Disk Utility and repaired the disk but that didn't help. I am able to boot up fine in Safe Mode but still can't get past Spotlight in regular mode. Any ideas what is going on? I had no problems before this began.
Since Safe Boot disables your log in items, I wonder if one of them is the culprit? Maybe eliminate the log in items and see if it boots up normally. If so, add back the log in items one at a time and see which one is causing the problem.
Good luck!
Similar Messages
-
After booting into Mac OS from Windows, which never gives me a problem, I login to my account and then the Dock loads, but the top toolbar doesn't, and I'm not able to click anything after this. I had to hold down power button to power down, and then I am somehow allowed to sign into the Guest Account with no trouble at all. And also am able to log back into Windows Partition which is working fine as well. Any ideas? Because this is the second time within a month that this has happened and I'm thinking the only remedy is a clean install, not just a restore from Time Machine.
Most likely, you have a web plugin that depends on the Java runtime distributed by Apple. If you no longer need the plugin, remove it. Otherwise, install Java.
-
Menu tabs disappear completely after login and appears if only i press on item node at hire level
I'm using a Menu Model to Create a Page Hierarchy in my adf application on Jdeveloper 11.1.2.3.0
it is in three levels level 1 have 2 item nods (home - Help) displayed as buttons
level 2 contains 5 item nods about the managements displayed as tabs
level 3 is about reports displayed as list
the point I have apply security in the application using Adf security wizard and i assign roles and users and grants
all works fine but level 2 tabs disappear completely after login and appears if only i press on Home item node at run time
I create 2 users (admin) has all roles and can view all tabs in level 2 of my navigation and another user (emp) which can view one Tab page in level 2
Point 1 --the item nod are rendered according the #{securityContext.regionViewable['oracle.view.pageDefs.RentManagPageDef']} (EL ) expression language
and other item nod render property are set as the same but in the page name definition
it works fine
_ Point 2 in my page template I set #{menuInfo.rendered} for renderd property of the command navigation item
it works fine
- point 3 I add a go link in my template to explicit perform log in log out from the app and redirect the user to the required page
Destination is
#{securityContext.authenticated ? "/adfAuthentication?logout=true&end_url=/faces/wearhouse.jsf" : "/adfAuthentication?success_url=/faces/company.jsf"}
and its also works fine
the problem is in the level 2 navigation tabs which is diaper after explicit log in the app directs the user to the correct page successfully
But the tabs are not rendered till I press on home button on Level 1 navigation it appears and it appears correctly cording the logged in user validation
in another words i log in as user (admin) i get directed to the successful log in page in the link go but level 2 tabs are invisible or not rendered at all I click on Home button in level1 navigation the tabs
become rendered or viewable and i navigate normally
I log out as admin the level 2 tabs becomes invisible again
then I log in as (emp) i get directed to the successful log in page and level 2 tabs are still invisible or not rendered
I click on Home button in level1 navigation the only one tab the user emp authorized to it gets rendered (appears)
and its semi correct behavior because this is what I want him to see only
my tries to find solution
I tride to use
#{securityContext.userInRole['division']}
on the menu node item I found same behavior level 2 tabs gets hidden till i click on home link at run time
I tride to use #{securityContext.authenticated} to control item nods rending
all tabs remains visible and i dont want that ain adition if user clicks on a tab of page he has no authority on it i recive server error
I read 30.7 Creating a Login Page in the Fusion Developer's Guide for Oracle Application Development Framework to finde about redirecting user
and it is using the same as i did from adf tutorials
I tried to make new navigation app on fast
maybe i made incorrect change in any stage of my original app
but I found same behavior
I tried to set disabled property instead of rendered property the tabs are always rendered but I got server error when I click on a tab which a user does not authorized
So I doubt maybe problem in the El or the way I use to control rendering item node
or there additional step to stop all the tabs disappear after login
I hope please some one Help or tell me what i have to read about in the developer guide or interface developer guide or article on the web
I'll be gratfule
I know maybe it is small issue but help me pleaseHi,
have a look at the sample that comes with this article: Oracle ADF: Security for Everyone It uses resource remissions to authorize panel tabs.
One test to run is to print the outcome of the security evaluation (e.g. output text) to see what it returns.
Frank -
Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so muchHi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help. -
This problem started about 10-20 days ago.
After login to the e-bank on line service of the Eurobank EFG Serbia further work is not possible because the screen became gray and an error message appear: Keyboard Navigation Disabled.
I run the laptop on Win 7 Professional - 64 bit Service Pack 1.
My default web browser is Mozilla Firefox 21.0.
Alternative is:
- Internet Explorer 10
Version: 10.0.9200.16576
Update Versions: 10.0.5 (KB2829530)
I have scanned my laptop and cleaned few fond viruses. Have uninstalled and installed again Java so now I have:
- Java 7 Update 21
- Java 7 Update 21 (64-bit)
I have uninstall and reinstall Firefox.
Result is that now I can run e-bank online in IE but not in Firefox.
Customer support service from the bank told me that the problem is related to the browser...Problem still exist - looking for a solution.
You may see how this appears on the screen at the attached picture. -
ios7 bookmarking web application to home screen via Safari, crashes after login and when we try to open any link inside from the icon that gets created on the home screen. Can anyone please tell me if there is any scheduled fix for this bug in safari?
From what i understand i see that - Cookies are not transferred between your website and your webapp when installing the icon on the home screen (for authentication purposes for example). It was working until 6.1 and now it’s not working anymore.
Can someone please tell me if this bug will be fixed in any future release, if so the ticket number of some kind that i can track, or if there is a workaround for this issue?ios7 bookmarking web application to home screen via Safari, crashes after login and when we try to open any link inside from the icon that gets created on the home screen. Can anyone please tell me if there is any scheduled fix for this bug in safari?
From what i understand i see that - Cookies are not transferred between your website and your webapp when installing the icon on the home screen (for authentication purposes for example). It was working until 6.1 and now it’s not working anymore.
Can someone please tell me if this bug will be fixed in any future release, if so the ticket number of some kind that i can track, or if there is a workaround for this issue? -
10.4.11 clients failing after login to 10.5.8 server
I am going crazy trying to setup our xserver this year. I had it running last year without any problems. This year, the 10.4.11 clients keep losing connection to the server after login. After login, the Home folder is there, then gone. You can see it disappear. The log reads "cannot mount /network/Servers/mac.ourdomain.edu.au/volumes/t_home/teacher error 22 (Invalid Argument)"
Leopard clients seem fine.
I have tried everything - rebinding; reinstalling many times. I thought the path to home folders might be too long; so I made the shortname smaller to get under 89, but I've never had to do this before. Changeip returns no errors. DNS is fine - there are some errors to certain addresses "could not update - permission denied". However these machines are not losing connections. I tried a dummy set up on a different address but got no further. Can anyone post and tell me:
1. AFP connect via : I usually use Standard to avoid Kerberos timeouts - is this the problem?
2. Guest access: supposedly helps with Tiger clients - true?
3. Total path to home folder - Tiger setting?
4. Login to the server to set up sharing in Server admin using IP Address ok?
I have never had these sorts of problems. Do I just need to wipe the pre 10.5 clients? They have been set to the same IP for years so I'm wondering what I should do there. Is it DNS? I can get more log files tomorrow.
Btw, not just beginner - I have spent a fair bit of money and time on training and have had many successful set ups at school, but really struggling here. Any tips or brickbats please . . . thanks very much.Unless things have changed, Guest Access must be on the User share on the server.
The workstation needs access to resources prior to a user actually logging in.
We use Kerberos only for our 10.4.11 and 10.5.8 clients. We also use the DHCP and DNS service on the Mac servers.
We set guest access allowed in the AFP section and in File Sharing / Protocol Options. That does not mean that you actually need to give the Guest account access, just that it must be on. -
I have an Ipod Touch 2 and rebuilt my laptop. Reinstalled ITUNES and can't find my applications on ITunes after login. I tried to activate Itunes again but it didn't. How can I get my applications to display on ITUNEs?
It sounds like you essentially have a new computer and unless you restored from a backup your iTunes library would be empty. You can transfer your iTunes purchases from your iPod to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
SInce you changed syncing computers. after you move the stuff you need to restore the iPod to factory defaults and sync the stuff back to your iPod. If you had the iPod backup file you could restore from backup.
If you have non-iTunes pruchases you can copy them to your computer by using one of the third-party programs discussed in this previous discussion:
Best iPod to PC -
I am having an issue with an iMac that has OS X 10.5.8 installed.
Immediately after login I get a blank wallpapered screen (wallpaper is the same as wallpaper at login) w\ cursor. ...It never goes into the desktop where there is a taskbar and desktop icons. This started happening to a couple of my desktops after I installed ESET NOD32 4.0.12 for Mac (AntiVirus).
Has anyone else seen this issue or know of a fix.You will have to see if you can start the computer via other means,
in that if you can start in SafeBoot mode, you may be able to be rid
of that anti-virus software. That likely is the problem's main cause.
SafeBoot mode: restart, hold Shift key, until you get log-in screen;
login to get to desktop. From here, you can do a few things, but the
computer is not running at full system usefulness. You may be able
to remove this AV software, or see if it has an Uninstaller; and also
you can repair disk permissions in Disk Utility. Among other tasks.
When done, restart normally. (You could also boot from install disc
and use the menu options to run Disk Utility, and other jobs.)
If the product did not come with an Uninstaller in its software, you
may have to try & remove it by other means. These things will put
more into the computer's OS than just an item in the Utilities or
Applications folder; so an Uninstaller is likely a necessity. There
are a few shareware and free ware uninstallers, such as AppDelete
available online as downloads. If you can't find an Uninstaller in the
software you installed (may be in the app's folder in Mac) you may
have to contact the products customer support and ask how you
are to remove the entire product and its parts from your Mac.
If you are lucky, they may actually know where you could go in and
carefully remove those bits; and luckier still, if there is an uninstaller.
Good luck & happy computing! -
My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?
Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.
-
Windows 8 .1 black screen after login with cursor
after login in pc i get a black screen and a cursor i can do nothing please help me i updated windows 8 to windows 8.1.
HI , Welcome to the HP Forums! It is a grand place to find answers and information! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More How Do I Find My Model Number or Product Number? I grasp that you have a HP 15 notebook and you recently upgraded from Windows 8. to 8.1. Now after you enter your Windows password you get a black screen with a cursor. Here is a link to HP PCs - Black or blank screen with blinking cursor after entering Windows password. To say thanks for responding please click the thumbs up icon below. If this solved your difficulty please tell people by selecting solution provided. Best of Luck!
-
My screen is frozen after I hooked it up to my laptop for synching and this window appeard asking for update. Now it won't do anything.
Have you tried a hard reset yet to see if that makes a difference? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. This may take a couple of tries.
B-rock -
Black screen after login on Satellite L350-20Q (normal mode)
My Satellite L350-20Q run Vista basic.
After login that is normal I go to the turning arrow then to a permanent black screen when I start in normal mode.
In safe mode I have a normal behaviour and I can work. Spybot report no malware present. But my Avast antivirus does not seems to work in safe mode.
Do you have any idea of this problem ?
A fellow has advised me to update my graphic drivers which is presently Intel Corporation 12/06/2008 version 7.15.10.I502 for Mobile Intel 4 series express chipset family. What is the URL and the filename to download the most recent driver ?
Message was edited by: nigelle normal mode added in title.1) I have already done a roll back but without success
2) total reinitialisation and updates is a long and tedious process I wish to avoid if possible.
Downloading and installing a new driver is fast so I prefer to try this before even if the probability of improvement is low. Where can I find the driver for graphic ?
3) I bought this lap top in June and Win7 was released in September or October.
All manufacturers had promised a free update to Win7.
But after the release of Win7 my laptop was not in the eligible list may be only because it ran on Vista basic and they were not Win7 basic and Toshiba did not want to pay for the upgrade...
Not very honest !
I dared not to buy a Win7 license because I think that Win on a laptop is a slightly modified version. -
Black screen after login. Windows 8 is not opening
After login, I only have a black screen with a cursor.
Windows 8 does not open. Cannot get to "System Restore" or Control Panel.
HP hardware self- diagnostic tests were negative & didn't help.
Please offer possible solutions for recovery.Then that does not pertain to your problem.
On Kaspersky Rescue Disk on another computer download and burn to USB stick or DVD to run a full scan on your computer.
http://support.kaspersky.com/4162
Are you able to boot into Safe Mode to perform a System Restore?
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
Adobe content viewer grey screen after login on windows 8.1
we're on Windows 8.1, content viewer is not running, after login it shows a grey screen with just "Adobe content Viewer" on the upper left, but nothing working....
I'm sorry Neil, I'm working on a folio on Indesign, if I share the folio from Folio Builder (Indesign) to my account, and then I open adobe content viewer on my iPad, I can see the cover of the folio shared and I can download it.
Instead, with the same account on adobe content viewer (windows 8.1), I see nothing and I can not do any action.
Maybe you are looking for
-
i am having code which create report in excel.but it prints only single page. if content is more than size of template than insted of tacking new page it prints only single page.Please help me out. Anyone has material for learning activeX in labview?
-
Want to reinstall OS X 10.5.8 without cd; command r not working
I am selling my iMac and want to erase all the personal data and set back to factory. I followed steps to reformat the hard drive, but cannot get the mac to start in recovery mode to reinstall the OS X 10.5.8. The computer did not come with the disk.
-
TV@nywhere driver updates ?
Hi I live in the netherlands and this week I bought a TV@anywhere master tv card. Now my problem is that it does not find all the channels on my cable. I got on my tv set about 30 channels but the card only finds 5. The 5 channels I get have perfect
-
System not signing out or shutting down properly.
The problem is sometimes (not always) when I shut down my computer (which I recently updated from Windows 8 to 8.1 via Store), or sign out - it hangs. Hangs in the way, that when signing out it keeps showing signing out for 30 minutes, after which I
-
I recently purchased the iPhone 5 and all of a sudden my phone has been freezing whenever I try to use the emoji app in text messages, and on any social networking site. I have tried to delete and re-install but nothing seems to be working. what sh