Frozen and im going to throw it agianst the wall sooon!

ok so i was listening to my 5g ipod and it stoped playing music so i took it out of my pocket and it had forzen. I tried to reset it and its none-responcive.... so i put it back in my pocket to wait untill i got home to try putting it on my computer. so i then got home and it didnt do any thing. and my computer doesn't even recognize it.. any ways to fix it, also i took it to the best buy i bought it from and they were going to give me a new on and then they didnt have any so i have to wait but i was wondering if there were any quick fix-it tips or any thing.

What did you do to try to reset it?
http://docs.info.apple.com/article.html?artnum=61705

Similar Messages

  • My iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    Hi Goofy Goat,
    Welcome to the Apple Support Communities!
    It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Have a great day,
    Joe

  • My iPhone 4s is not connecting to wi-fi and i've done everything-reset, iTunes synch, hard reset etc...- bar throwing it at the wall, suggestions?

    My iPhone 4s is not connecting to wi-fi and i've done everything-reset, iTunes synch, hard reset etc...- bar throwing it at the wall, suggestions?

    FWIW, I have no problems at all with Lion. Running on a Late 06 iMac with 3GB of RAM and it handles it fine. A little slow, especially compared to my Mid '11 iMac, but neither one of them have problems with the beachball. I push the '11 iMac especially hard with multiple Windows installes running in VMWare Fusion at the same time as well as Safari, Word, Excel, Mail, iTunes, iPhoto, and iCal all running.

  • I just imported 70 photos successfully, edited them, and then attempted to upload them to a Facebook album.  It did not work and got hung up, so I force quit IPhoto and was going to try again.  The 70 photos have DISAPPEARED!!  Help !!!!

    I just imported 70 photos successfully, edited them, and then attempted to upload them to a Facebook album.  It did not work and got hung up, so I force quit IPhoto and was going to try again.  The 70 photos have DISAPPEARED!!  Help !!!!

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • My iPod touch is not turning on or nothing. i have done all the things i could think of, other then throwing it at the wall. Please help!!!!!

    I cant get my iPod touch to turn on or do anything. Can you please help i have done all i can think of and i'm about to throw it at the wall.

    Without knowing what you actually tried:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • TS1410 My iPod Touch is not charging, nor is it syncing with my computer and iTunes. It will charge on the wall charger, and my wife's iPod Nano will sync on the computer. I did go in and reset my iPod back to factory settings, but still will not work. An

    My iPod touch is not charging, nor is it syncing with my commputer and iTunes. It will charge on the wall charger, and in the car, but not on the computer. My wife's iPod Nano syncs on the computer. I went in and reset my iPod Touch back to factory settings and now it will not let me get in unless I sync to iTunes on my computer. Well, it still will not connect thru the USB cord. Does anyone know what I should do to get this corrected? I want my iPod back.

    Have you seen and worked through the suggestions in this Apple support document?
    iOS: Device not recognized in iTunes for Windows
    If you have any questions about any of the steps, feel free to ask!
    B-rock

  • My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

    The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS  6.1.5

    You do have iTunes 10.7 or later on the computer, right?
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Ok my phone was wet in a pool did the rice thing and then dryed it and it comes on when plugged to the wall. it says to connect to itunes and when I try to plug it to my computer on itunes it shuts off? help what should I do:(

    ok my phone was wet in a pool did the rice thing and then dryed it and it comes on when plugged to the wall. it says to connect to itunes and when I try to plug it to my computer on itunes it shuts off? help what should I do:(

    Connect to iTunes alert (picture of iTunes logo and USB connector) - iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode
    If it still won't do anything, make an appointment with Apple and be prepared to get a refurbished phone at out of warranty prices.
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone     $149

  • Okay, so my iphone 4s will not charge at all. I been charging it on my windows laptop, and it just stopped charging. even on the wall. What should I do? Help.

    Okay, so my iphone 4s will not charge at all. I been charging it on my windows laptop, and it just stopped charging. even on the wall. What should I do? Help.

    Wow long time ago to find a thread...
    Hold the power and home button while connected to your computer for 10 seconds. Then release JUST the power button and continue holding the home button and iTunes should recongnise the device in recovery and then hit restore and iTunes will proceed to wipe the phone and restore to the latest iOS your device can go too.

  • HT4972 My ipods screen is black and wont turn on unless plugged into the wall

    My ipods screen is black and wont turn on unless plugged into the wall not the computer but when i plug it into the computer and put it in DFU mode it wont restore there is an error 3194 and error 1602 and nothing i do helps

    Here's what I found about error 1602:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert,update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194 is also seen when somebody is trying to restore jailbroken devices.

  • I am going to throw it against a wall soon....FILE with ! next to it!!

    I use it everyday but have not for about a week or so.
    I went to use it today and there was a file with at ! next to it or the apple...it would go back and forth.
    I thought no biggie when I get home I will plug it into my PC and update.
    Not working. I have updated the Itunes and Ipod fix from the ipod.com site. I have tried the restore by holding the menu and the middle button.
    NOTHING is working. Just the apple with the file and the !
    I have recently upgraded to a DSL modem. Do I need to get a new USB cord to plug into THAT instead of what I do know which is plug it into the USB in the front of my PC hardrive.
    I just need help. I have been going over and over and OVER the ipod site and nothing is working.
    It seems to be updating when I plug it into my PC with the USB cord it has the "Do Not Disconnect" but then it goes back to the apple then to the file with ! then to the Do Not Disconnect.
    It is a regular 20G ipod I got it last April.
    Also in my Itunes it no longer says MY IPOD on the far left.
    Any help would be VERY VERY appreciated
    Thanks.

    Having similar issues a couple weeks ago and returning my ipod on one occasion, i did have many troubles that made me want to throw it out the window but. After doing the following it is now working better.
    1. Get rid of the Januar 06 update (major problem for my computer and ipod with this new release)
    2. Use a 1.0 USB connection to update to a prior version, I updated with the november version that was included in the box. For some reason the 2.0 crashed on me, the 1.0 is slower but works. (if yours works with 2.0 - good for you, did not for me)
    3. When you connect to I-tunes for the 1st time do not allow the automatic update your firmware "cancel" and also I move the songs over in batches,i did not allow automatic syncros. - Guess this would be depending on how many songs your moving over( there seemed to be a problem moving over large volumes of data?)- Any time after I connect it is on automatic sync.
    4. Now I a had at first issues with the system recognizing my I-pod so I changed the drive letter assigned. You may not have this problem
    There has been alot of discussions in this forum about the new updater and the problems it has caused. I know for me it has been a major headache.
    hope this helps

  • HT1430 How can you reboot your Touch if the screen is frozen and will not allow you to use the "slide to power off"

    How can I reboot my Touch when the screen is frozen and I cannot use the "slide to power off" feature?

    Next try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT1414 my iphone is frozen and when i am trying to restore the same it is giving error code 21 again and again

    Please help my iphone is frozen and showing only apple sign, after following few tips for web it reached to itunes sign but every time i am trying to restore my iphone it is giving me an error code 21 ???

    If your phone is frozen showing the Apple logo, you need to try to force it into recovery mode to restore it as discussed here:http://support.apple.com/kb/ht1808.  If you're getting error 21, try disabling or troubleshooting your security software (anti-virus, etc.).  This is Apple's discussion on error 21 (copied from http://support.apple.com/kb/TS3694#error21):
    Error 20, 21, 23, 26, 28, 29, 34, 37
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • My safari page is frozen and it can't leave it but the rest of the iPod works perfectly fine. On safari this one page is frozen so i can't search up anything else. help

    my safari page is frozen and it can't open up another tab either but the rest of the ipod touch works perfectly fine . please help

    1. Double-click the Home button to close the Safari Apps in Task Bar
    2. Hold the Apps down for a second or two until you see the minus sign
    3. Tap the minus sign to close App
    4. Tap center of screen to return to Home Screen
    5. Restart iPad

  • When plugged into wall, iPhone 4 says to restore at iTunes.  When plugged into PC the apple icon flashes 10 seconds and screen goes blank 10 seconds. The device never shows in iTunes.  How do I restore?

    I need to restore my iPhone 4 in iTunes.  I get this message when it is plugged into the wall.  When I plug it into the PC it doesn't stay on long enough for recognition.  How do I restore?

    Sorry, disregard the last response; I can't edit it. You should dry it BEFORE trying different cables. The safest way to go about this is dry your iPhone inside-out and to not turn it on until it's dry. Maybe there is a little moisture stuck inside preventing it from booting, but if you're lucky, it's not permanently damaged. The best way I've heard of to dry it is to leave it overnight in a tight bag with dry rice or, better yet, silica packets (those anti-moisture things found in packaged items). Maybe longer if you want to be extra safe. If it still doesn't charge without the Apple logo flashing, try using different Lightning to USB cables. Maybe it's just a bad cable, but you shouldn't test that until you've dried your phone.

Maybe you are looking for

  • WIJ 20002 error on long running reports

    When trying to run a long running report, an error message is received . Quote: *"The Web Intelligence Java Report Panel cannot connect to the server. Close the report panel and try to connect again or see your BusinessObjects administrator. (Error:

  • 7th gen iPod not showing up in Windows 8 anymore

    7th gen iPod not showing up in Windows 8 anymore. Tried all the apple troubleshooting. Help?

  • CS3 Overlapping graphics flash

    On a Mac. I have placed about 8 graphics on a page and some overlap.  Using Ojects/arrange I have them the way I want.  But the parts that overlap will flash between what is on top and the next picture below.  Back and fourth.  If I zoom in or reset

  • Canvas Problem FCP

    Hi. I recently switched monitors from Diamond Mitsubishi to LG Flatrons. I find now everytime i play footage in the canvas of FCP its kind of jumpy, pans and tilts look bumpy. At first i thought it was the monitor but then i opened the original clip

  • Icloud transition upgrade mail database hung up

    Just installed Lion and doing the icloud transition. "upgrade mail database" has been running for an hour. Something is wrong. What should I do?  I am sending this from another computer.