Frozen Apple Logo

I just got my hands on my roommate ipod with hopes to fix it.
well.. the issue:
so It turns on, the apple logo appears (no backlight) and it stays there. I have some clicks going on and it still sits there. It sits frozen in the logo screen for hours, nothing happens.
I put it in disk mode and connected it to a pc. It works. the ipod comes up with all the music, and it even plays too. Everything functioning normal right? no.
So I tried restarting from disk mode and nothing happened but the stupid apple logo again.
After that i decided to put it back into disk mode and connect it to itunes.
I restored the ipod with the original factory settings, and it worked.. or did it?
I got the apple logo to appear with the loading bar at the bottom, as if it would reset. NO
it didn't reset, instead just sat there with the stupid logo again and didn't actually start up.
I've tried each step individually. it cant get passed that stupid logo. I don't think its the hard drive, its spinning/reading and playing music.
Keep in mind I connected it and restored it once with a pc then with a mac, and nothing happened differently.
It might be software issues?

Hi, I had the same issue with mine. I got it back into the menu after trying to make one partition in Disk Utility but the iPod won't sync and freezes up Disk Utility and iTunes. I tried to format the iPod but that won't work. I get the message that the disk cannot be deactivated in Disk Utility. Anyone?

Similar Messages

  • Iphone 4g frozen apple logo

    Hi there, i have the following problem
    I made factory restore to my iphone and after it restarted i have a frozen apple logo and some colored pixels to the top of the display, I ve restarted several times holding power and menu button(hard reset) but the problem remains the same.
    Please help me

    Was your iPhone Jailbroken before the restore? Beacause the pixels only come on the boot screen of a Jailbroken iPhone.

  • Frozen apple logo on screen ipod touch?

    Just the apple logo apears on screen seems frozen in position holding reset buttons do not seem to help?  IPOD TOUCH

    See if you can connect in recovery mode: http://support.apple.com/kb/HT1808

  • How to i get my iphone 5 unstuck from a frozen apple logo, How to i get my iphone 5 unstuck from a frozen apple logo

    How to i get my iphone 5 unstuck from a frozen apple logo

    Hello Beau460,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    Best of luck,
    Mario

  • Frozen Apple Logo and Kernel Panic

    Over the weekend I went to sleep and when I woke up I noticed that the power in the apartment had gone out. I turned on my iMac G5 running 10.4.6 and was greeted by the grey Apple logo and spinning wheel. I shut down unplugged everything, and turned my machine back on to the same results. Afterwards I tried repairing the disk from my OSX dvd. Tried a few times, but kept getting the same two errors that it didn’t seem to repair. Tried to boot up again and this time I was greeted by a blinking earth and then blinking question mark and then the machine showed a kernel panic screen. I tried running disk warrior and the program seems to run ok and only list one set of things that it could not repair, but when I check the preview my Users folder and other folders are missing. I see applications, documents, and a few others, but the total GB in all of these folders in the preview is only about 50-60 GB. However disk warrior correctly shows that the total HD space is 233GB, with 44 remaining, which is roughly the amount, give or take a few GB I had remaining before I went to sleep. I called Alsoft and they had me try to rebuilt from my older iMac running 10.4.2 in target mode, and as a root user, but both times I got the same results. Do you know what else I can do to recover my data or repair my HD. I’ve pretty much conceded to the fact that I just want to get all my working data on my external HD then erase and reinstall OSX and drag my data back. What else can I do? Any suggestions?

    1. If necessary, go dig up your original system disks that came with the iMac G5.
    2. Check the labels. One should explain how to start up from that disk to use the hardware test it contains.
    3. There is also a 'read me' file on that disk explaining exactly how to use it.
    4. The same info is in the paper User's Guide manual that came with your iMac -- page 58 if we have the same model, as I think we do. If not, check the contents under "Troubleshooting."
    5. If none of these guides are accessible, try the appropriate online manual for your model, available through the "Manuals" link at the top of this page.
    If the new iMac's HD does not show up in the old Mac's Finder even with a "pass" from AHT & the repair attempts you have made with Disk Warrior, I know of no other way to access the data other than with Data Rescue or a similar tool, or with a data recovery service, which is generally quite expensive.

  • 2nd Generation iPod with frozen Apple logo

    Tried to reset this iPod using the menu/play button technique. Just returns to logo. When I plug into USB, iTunes doesn't recognize and neither does my computer. Stuck and don't know what to do.

    That sounds like the 3rd gen iPod. However, it is designed to work with FireWire as well. It may sync over USB if the battery is topped off, but it does not charge over USB. The only way to use USB is to use this special two-ended cable that has both a FireWire and USB connector.
    http://store.apple.com/us/product/M9688G/A?mco=MTIxODk3Mw
    The USB end goes to the USB port on the computer. The FireWire end goes to the square white wall power adapter to supply power to the iPod while it syncs.

  • Frozen Apple logo and Clicking noise

    I reset the Ipod (I believe 5 generation) to factory settings, It now wont show up In I tunes or on my computer for that matter, and Just shows the applue logo and makes a clicking noise.

    Hiya,
    Your hard drive has died. My company www.dr-pod.com can replace this for you.
    Thanks
    Mark
    I may receive a reimbursement from this post.

  • Ipod touch frozen at the Apple logo

    Hi,
    I have an issue with my ipod touch, it wont start nor does itunes recognize it to allow me to restore. I pressed the sleep and home button and get the Apple logo, but nothging after that. Tried running the diagnostics from Itunes 7.6.2 without any luck. I have pasted the output of the diagnostic test below:
    ================================
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    TOSHIBA Satellite 1955
    iTunes 7.6.2.9
    QuickTime 7.4.5
    CD Driver 2.0.7.3
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 1.1.4.7
    Bonjour 1.0.4.12 (118.4)
    iTunes Serial Number xxxxxxxxxxxxxxxx
    Current user is an administrator.
    The current local date and time is 2008-05-16 15:37:19.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA GeForce4 440 Go
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 7.6.2.9 is currently running.
    iTunesHelper 7.6.2.9 is currently running.
    Apple Mobile Device service 1.14.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
    Intel(r) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    iPod touch running firmware version 1.1.3
    Serial Number: xxxxxxxxxxx
    ** iPhone/iPod Touch Sync Tests **
    One or more sync tests failed.
    ======================================
    Any suggestions please?
    <Edited by Moderator>

    When I turned on my iPod Touch, I got the frozen Apple logo. I tried connecting to my computer by USB but iTunes would not recognize my iTouch. Holding down the Sleep+Home buttons only restarted back to the frozen Apple logo screen again. Finally, I found putting the iTouch in "Restore mode" http://kaspers.freeflux.net/blog/archive/2007/10/15/how-to-force-your-ipod-touch -into-restore-mode.html
    where you hold down both Sleep+Home, then let go of Sleep while still holding down Home. After a couple of tries, iTunes is now attempting to restore my iTouch.

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • HT201412 Iphone 4s is frozen on the black apple logo screen. have tried to hard power off but it will not turn on. Have connected to computer but device it is not recognizing the device so can't do an itunes update. any suggestions?

    My phone is frozen and I can not get it to "Wake up"
    Stuck on the black apple logo screen. And my computer and itunes are not responding when I plug it in.
    Any ideas?

    try doing a restart / reset first
    http://support.apple.com/kb/ht1430
    if this doesn't work
    You can try the step here in this link.
    http://support.apple.com/kb/ht1808
    when you're stuck on the apple logo, the operating iOS doesn't load so itunes could not detect the device

  • My iPad mini would not connect in order to download an update, I decided to go to original settings, the screen is frozen showing the apple logo and nothing else, it will not respond.

    My new iPad mini would not download an update bnor allow access to app store downloads etc, I decided to revert to original factory settings, the screen is now frozen, showing only the Apple logo in white on a black background, it is now frozen, what can I do?

    Try a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it and now its frozen on the apple logo how do i fix it? ps button dont work

    I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it i guess and now its frozen on the apple logo how do i fix it? ps my ipod home button doesnt work.

    Try as much as you can. When it says to place in recovery mode use this program instead.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • TS2771 my ipod touch is frozen with the apple logo on the screen, won't turn off, have already reset it and it still sits the same...logo on screen.  Can anyone help me out?

    My IPOD TOUCH is frozen with the Apple logo sitting there on the screen.  I have already reset the ipod because it was freezing up so I reset it, but now it won't shut off or got o main screen it just sits with the logo on it.  I can't turn it off.  The screen will also flash as though it will turn off then goes back to the logo screen.  Does anyone know what the heck is going on with my IPOD?  It's reall frustrating me...ALOT!!! 

    - Try:
    iOS: Not responding or does not turn on
    - If not successful, let the battery fully drain. After charging for at least an hour try again
    - If still not successful, time for an appointment at the Genius Bar of an Apple store.

  • While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?

    While updating my MacBook Pro to the newest software, it froze with a grayish screen with a Apple logo and a frozen pinwheel right below it. What can I do to finish updating or to fix this problem?

    We can't help you if you don't even know what you are installing.  Never install anything if you do not know what it is.  Installings through Software Update always have explanations which you should be reading to see if you actually need and/or want them.
    That being said, it appears you attempted to upgrade to Mavarick.  Although I am not positive. 
    Sorry, I am going to back out of this because I nor you know what it was you installed.  Hopefully, someone else will chime in here. 
    GOOD LUCK! 

  • I have tried to update my iphone 4 and now it is unresponsive and frozen on the apple logo or either the itunes logo

    I have tried to update my iphone 4 and now it is unresponsive and frozen either on the apple logo or sometimes i can get it back to the itunes logo though it is still frozen.  I have also tried restoring it and still nothing

    See here - http://support.apple.com/kb/TS3694#error1603

Maybe you are looking for

  • Tomcat doesn't find servlet

    (I apologize for the strange formatting of this message. I don't know exactly how to control it.) I'm trying to deploy a basic "Hello World" servlet into Tomcat (6.0.18) on Mac OS X Server (10.5.6). When I try to access it. I get 404 (not found) erro

  • Does anyone here access a shared calendar with their Blackberry???

    I work for a very large company and I don't use my personal calendar. I use a calendar on a shared mailbox where several people enter appointments I need to attend. So far I have not been able to get a hold of anyone in our IT department who knows if

  • Event metadata name constant

    hello, I am a young new Flexer that has a question: When I define a style for my component using the style metadata tag as so: [Style(name="backgroundColor", type="uint", format="color", inherit="no")] can I reference a constant for the name property

  • Gaming and Temperatures

    So I am looking into purchasing my favorite gaming series newest addition to their line up: Civilization 5. I tried the demo and it works fine in boot camp on medium settings which is great. My issue is the temperature of my macbook pro. I have a pro

  • BATCH SPECIFIC MATERIAL UOM

    Dear All, I created material, base unit of measure EA order unit BOX.1BOX = 40 EA create PO ORDER 10BOX, 10*40=400ea. now the problem while receiving GR, I will receive 10box but each box 41ea.so it mean i received 10*41=410ea. I WANT TO CHANGE PACKI