Frozen Image On Desktop

Can anyone help please? I have an image of a blue leaf that just appeared on my desktop. I've reinstalled 10.4.11 and completed all updates but the image is still there. Tried all reboot types explained in other discussions but the image is still there. I was not connected to the net when this happened. Still no luck with AV scans or disk repairs. Can anyone help? Ta

Went to the Apple Store today. They are going to change my display.

Similar Messages

  • Frozen image on desktop wallpaper Retina

    On my MacBook Pro Retina there is something frozen on the desktop. I have a blue screen, as a wallpaper, and I can see the safari page, very very lightly, frozen in the middle of the screen (even though Safari is closed).
    How can I get rid of it? It seems like burned.

    Went to the Apple Store today. They are going to change my display.

  • Frozen Image

    Hi Folks,
    Anyone got any clues as to why the video image freezes every so often? I've searched this forum but not found anything close to the issue. My specific issue is this : I use the JMF to grab a jpg from a video capture card and save the image. The application runs as a service in Windows and we don't have any need to render the image. The service runs for 2 months then we get a frozen frame which continues to be used for all future images. I'm using the StateHelper to manage the processor state and the log shows that the media time continues uninterrupted. There is a slight memory leak over time which we monitor but its not excessive and well within operating parameters.
    Thanks.
    Glasgow

    Hi Andy,
    Yeah. I check that the bufferedImage has data in it (as sometimes the JMF grabs null images, especially just after startup) but the frozen image consists of data. I thought about storing the last image in memory and then doing a checksum on the new image acquired - if the checksums match then the image is exactly the same as the previous one - but I don't even think I can close the player and then re-instantiate it - I'm sure we've tried that and it hangs until someone logs into the locked desktop and manually closes the dialog box which is automatically popped (by Windows I think), saying that you can't connect to the video device because it's already in use! This is, I believe, an issue caused by the fact that you've got to check the "Allow service to interact with the desktop" checkbox.

  • Drag and Drop image to desktop == Zero Byte File

    Drag and Drop image to desktop == Zero Byte File
    == This happened ==
    Every time Firefox opened
    == FireFox 3.6 OR Windows 7 64

    i have the same problem and Sun doesn't seem to have an answer to this question. The DnD works in Mac OS, but not on Window 2000/XP.

  • Stop people copying/saveas your images to desktop in iWeb

    Hi All,
    Is there a way to stop people copying an image to desktop or doing save image as in iWeb?

    Here's a post of mine that may give insight :
    [Encrypting Images|http://discussions.apple.com/thread.jspa?messageID=12018618&#12018618]

  • Skype is frozen on my desktop

    Skype is frozen on my desktop - not even able to hard shut down
    Help please

    You can force quit. 
    option-command-esc
    or
    >Force Quit>Skype

  • Podcast: all I can see is a frozen image

    I have a problem watching my podcasts in the ipod after I have already synced to the itumes. The problem is that I start playing a podcasts but although I hear its sound there is a frozen image.
    pentium   Windows XP Pro  

    I have a simirar problem on linux operation system. Using
    version 7. One page didnt work because the version was too old. And
    when i force to load it i got a lot of object missing or they
    havent got right properties. Now i have reinstalled the system and
    some a bit different problem appeared Onsome buttoms i can only see
    a first letter. Text in chat window is not appearing. If i clok a
    few times on some buttons web browser freezes. I suspect that is
    the problem with too old version or improper instalation. I
    installed some old plugins too before installing new one.
    Try to run OS as administator. Try flash if it is working.
    If it is:
    find where flesh player is installled and check permission
    attributes there.
    try to find out what kind of devices flash is using and
    cgange permissons to them.
    I dont know how is mac os consisted. I suspect it has also a
    /dev folder as linux.

  • Icons for images on desktop do not update when edited in Preview

    I didn't know what topic to put this in but I guess I consider this a Finder issue.
    Here's the problem: In both Leopard and Tiger, when I edit something in Preview and save it the little icon preview image on my desktop (you know, above the file name) does not change, even after I restart. I know the world isn't going to end because of it but it has gotten to the point where I'll edit things in Photoshop instead of Preview just to get the stupid icon to be accurate, otherwise I don't know if I've worked on a picture already or not. It would save me from a lot of time wasted booting up Photoshop just to crop an image.
    I also noticed that the Spotlight comments (when I use "get info" on the file) still describe the picture in its larger format before cropping. It just doesn't seem to update itself. The image I am looking at as an example is a PNG right now but I'm sure it has happened with jpegs as well. (generally I'll just go into Photoshop in the end and save from there to update the icon out of frustration)
    Can this be fixed? It would certainly make me enjoy using Preview a little more.
    I thought this would go away with a Leopard upgrade but it doesn't seem to.

    chakramchucker wrote:
    Is there a way to remove or replace the preview image manually, then?
    select the files with custom icons and enter commandoptioni.
    in the resulting info window select the little icon in the top left corner and press delete.

  • Frozen image with video out to HDMI

    I have my iMac connected via an HDMI adaptor through a 10' HDMI cable into a Hi Def TV. It was working well but suddenly froze with an image that happened to be a photo from iPhoto. That image remains whenever the cable is connected into the TV. When the cable is disconnected, the image disappears.
    Any suggestions to diagnose this problem will be appreciated.

    *If your Display Preferences are set to Extended Desktop Mode (Mirroring Off) then it is possible to select and have a different Desktop background image for each Display.*
    Try this:
    *1. Go to: System Preferences and select Displays, then click on the Arrangement tab and look at the box for Mirror Displays, is it checked or unchecked?*
    a. If you want the displays to show the same image (Mirroring) then check the box.
    b. If you want to use the connected display for viewing different wIndows (Extended Desktop) then uncheck the box and go to step 2.
    *2. Go to: System Preferences > Desktop & Screen Savers and click on the Desktop tab.*
    a. Now you should see a Preference window on each Display which will allow you to select or change the image on each Display.

  • Dragging images to desktop unpredictable.

    MacPro 3.1 (early 2008)
    (3) NEC Monitors - all ATI Video Cards.
    Last week i made the jump from Snow Leopard to Mountain Lion via Clean Install. Other than having to give up a few apps that do not have an upgrade path, everything has been doing remarkably well so far (much less painful than expected).
    One anoying thing I have noticed is that when I drag an image from any application to the desktop, I cannot predict where the icon will show up (i.e. could be on any of my three screens anywhere)? In the past any time I dragged say an attachment from MAIL or say an Image from a Safari Google serach to the desktop, the icon would always appear right under where I released the mouse button. Now I can drag it to the middle of screen 2 and it may pop up in the lower right corner of screen 3 - you just never know? Even sucessive drags of images back-to-back scatters them across all my monitors.
    Am I the only one experiencing this?
    Any ideas?

    Do you get a real PNG file or a JPG file that has a .png file extension?

  • Images on desktop not showing thumbnail preview.  Suggestions?

    When I save images to my desktop, the image doesn't have a preview thumbnail image.  This just started about two weeks ago.  I'm running OS X 10.9.1 on my MBA I have not loaded any new software.  It doesn't matter if it's a png file or a jpg file.  The interesting thing is that after a reboot, the thumbnail image is there.  But...  When I add a new image to the desktop I get this image again until the next reboot.
    Here are a few at once
    Any suggestions on how I might correct this?  Thank you in advance.  Jeff

    Hello Jeff,
    It sounds like you are saving imgaes to your desktop but the thumbnails arent being generated automatically. Restarting seems to fix the issue for files since the last restart, but the issue persists with new messages. I had a few thoughts for things for you to try. First perform a Safe Boot and then retest it and see if that helps:
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    To start up into Safe Mode (to Safe Boot), follow these steps.
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key.
    The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
    After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
    To leave Safe Mode, restart your computer without holding any keys during startup.
    If the issue persists, next I would try verifying the disk and repairing any errors found, if any.
    Disk Utility 12.x: Repair a disk
    http://support.apple.com/kb/PH5836
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Using screensaver images as desktop background

    how can I find the images from the screensavers that came with the mbp? I would like to use them as my desktop background.

    To be clear, on a Mac, a "screen saver" is the moving images (or static) that display on a screen after a few minutes of inactivity, if so setup to do that.
    A "desktop picture" is the non-moving image you setup for the background of your screen. In the PC world, it's called a "wallpaper" and some mistakenly call it a "screen saver"-- I know, because a lot of PC users I know call it such.
    So two answers to your question:
    1) If you are trying to find the desktop picture to change your background, go to SYSTEM PREFERENCES > DESKTOP & SCREEN SAVER and then choose the DESKTOP PICTURE tab and select away. You can even drag and drop a photo/image to the box on the screen to set it as your Desktop Picture.
    2) If you want to use an image from a screen saver on the Mac, you can, while the screen saver is active, take a screenshot of the screen saver by pressing the following key commands: SHIFT + COMMAND + 3. The image will appear on your desktop to which you can then drag and drop it to the box in the Desktop Picture tab in the previous instruction.
    Note that you can even create a folder of collected images and select that folder in the System Preferences pane of Desktop & Screen Saver and all the images will be available to choose.
    Now...
    If your question was "How can I make my screen saver as my desktop picture background?" this would be your answer:
    http://www.wallsaverapp.com/

  • Drag and save images onto desktop

    Just wondering if anyone else has noticed that when they drag an image from the internet to save onto the desktop, it will automatically save it in grid and you're not able to save it away from the other icons which usually line up from the right-hand side? Before a recent re-install at the end of Oct '09, I was able to save the images anywhere on the desktop in order to find them more easily than having them bunched in with the already organized icons. My folder settings for desktop do not have snap to grid or keep arranged checked.

    Performance tip: Keep the Desktop clutter-free (empty, if possible)
    Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
    Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
    Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
    And it is why Apple invented 'Stacks' for Leopard.
    Here is Apple's take on the subject:
    http://www.apple.com/pro/tips/immaculate_desktop.html

  • Can't copy images to desktop ("Item busy")

    I'm trying to copy photos from an album in iPhoto 5 to the desktop, but I can't because I get the following error message:
    The selected items cannot all be put in the same location because at least one of them named "DSC00003.JPG" is busy
    I'm able to copy entire albums on to the desktop, so it looks like some sort of album corruption.
    I've double-clicked the mentioned locked image (DSC00003.JPG) which looks fine.
    But still thinking that this image might be the culprit I mark off everything except that image in the album, then drag the contents to the desktop's folder. Same error message, but with "DSC00002.JPG" being busy this time.
    Any solutions?
    And more importantly, what has caused this problem in the first place?
    It's worth mentioning that I've tried all the troubleshooting tricks that I know of:
    -logged out, then in again
    -restarted the computer
    -turned the computer off, then powered it up again
    -checked and repaired file-permissions (using "Disk utility" as well as "Applejack")
    None of this has fixed my problem.
    Powerbook G4 (1.67GHz, Superdrive)   Mac OS X (10.4.8)  

    I am not sure, but I am thinking some of the photos
    in the album have the same file name so you get that
    error message.
    I did some further investigation, and I believe you're right because I found a few files with the same names, but it appears that there are two naming schemes in iPhoto:
    1) If you click on the "i" (information) icon at the bottom left of the iPhoto window there's information about the photo, among them is "Title". This seems to be changeable
    2) Even though I changed the name of the duplicates (using the method above) I could find, I looked closely and found out that I had given a few photos unique, descriptive names (as opposed to something like "img_00023.jpg"), but I still get that complaint.
    So, is there a way I can change the actual filename? I know I'm not supposed to dig into iPhoto's files from the Finder, so I'm not going to mess around with that, but hope I can fix it from within iPhoto itself.
    Powerbook G4 (1.67GHz, Superdrive) Mac OS X (10.4.8)

  • Time Machine placing multiple disk images on Desktop

    Hi,
    I have recently set-up a 2TB Time Capsule for one of my clients.
    Each time Time Machine does an hourly backup - it places a Disk Image icon on the desktop called e.g.'Backup of Anya' - which is basically the sparse disk image mounting from the Time Capsule on the Desktop temporarily whilst TM backs up to it - the problem however is the disk image does not auto-unmount when completed ...
    An hour later it will mount another Disk Image backup on the desktop - and so on and so on and so on ...
    by the end of the day there are close to 10 unmounted Time Machine backup disks on the desktop - and subsequently in each machines 'Devices' panel in the Finder - all across the network ...
    Does anyone know why or how this is happening?
    It's my understanding the the image should automatically unmount when TM has completed its hourly backup.
    I'm stumped ...
    See sample screenshot from my client ... https://idisk.mac.com/macfinger/Public//image002.jpg
    MACFINGER

    Start with Pondini's Tips and FAQs at the top of this forum.

Maybe you are looking for

  • Why am I being charged for THEIR mistake?

    I signed up online to have new internet service started along with phone service.  I was told it would be on May 6th.  A guy even came to my home and told me it would be turned on that night.  After 2 days with still no internet, I called and complai

  • Campsite numbers are not oriented correctly on a michigan dnr campground map

    On the web page, the Michigan DNR campsite numbers are high and off the campground map, not oriented correctly for each campsite. What can I do to change viewer settings, add a plug-in or correct/improve my browser?

  • Opening a pages document in Word

    Hi there. I am mainly using Pages to edit documents that have been generated in Word by other computers. I have no problem opening and editing these files but when I am finished, is there a way of saving them so that I can email them back to the othe

  • What is the CTS concept exactly in real time

    hi this is ramesh looking for abap job could u any body explain me abt CTS CONCEPT FROM STARTING TO ENDING TRANSAFOR FROM DEV TO QUALITY CLIENT

  • Web Document Opening as Attachment ALUI 6.5

    We are working through an upgrade from ALUI 6.0 to 6.5 but have run into one problem... We launch 'Handshake' applications using the remote document submission and a custom content source. In 6.0 this would gateway to the application landing page suc