Frozen on plug in to mains power adapter icon after update

I updated the software on my ipod recently only to find it then frozen with an unknown icon. I checked the support website to see what this meant and apparently I have to complete the update by plugging my ipod into a mains socket via an adapter.
The only problem with this is that I don't have a mains adaptor - I have only ever charged my ipod via the USB cable and don't remember seeing a mains adapter. Is there a way to bypass this step of the update so I can use my ipod again or will I have to go out and buy a mains adapter?

You need to plug it into the mains adapter to finish the update.
Are you sure your iPod didn't come with one?
Either way, if there's an Apple Store near you, bring it in & ask one of the Geniuses to plug it in for you. That ought to do the trick

Similar Messages

HT4060 what do i plug my 10watt usb power adapter into?

what do i plug my 10watt usb power adapter into?

Can you provide a bit more information? Perhaps a picture of the device? Or a link to the manufacturer's webpage?

Power adapter icon on display

Salout, last night i try to restore my iPod with update software,everything was fine till i notice that I must have power adapter to finish update (memory flash), that is ok but, my power adapter was lost somewhere on berlin airport , so ...do I have some alternate way to resolve problem( on display is icon ,shows power adapter) and restore my iPod ? Thnx
PC Windows XP Typhoon

I only have "iPod dock connector to usb cabble 2.0" I try to connect ipod on PC over it, but..there is not response. So...propably I must to sit and wait for...something
ok thnx anyway.
( power to the people ?? yeah right!)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

My Plug in "Free Download Manager" stopped working after update

== Issue
==
I have another kind of problem with Firefox
== Description
==
My Plug in = "Free Download Manager" stopped working after I updated FIrefox !
It worked fine previously ! What did I do wrong ??
**** Also I've forgotten my User name, but Firefox says that my email is registered already
I was on some other Internet provider; and have been a PC user since 1987 ! I am a Retired Network Administrator for both Microsoft NT4 & Novell 4.x Networking; and a former IS Dept. Tech' for an Orlando, FL Corp' that had over 500 PC's;
both Lap & Desk Top for some 3 1/2 yrs.
***** I CONSTANTLY RECOMMEND FIREFOX TO EVERYONE THAT IS EITHER MY CLIENT -- OR ANY OTHER CASUAL CONTACT *****
***** In fact I suggested your Browser to 3 people Today; Wed. the 14th of July 2010 *****
Respectfully;
Raymond E Bachelor
aka "New System Services"
<blockquote>Removed personal info. Please don't out yourself, or post personal info on forums. thanks! -T </blockquote>
== This happened
==
Every time Firefox opened
== I updated Firefox to the Newest Version !
==
== Troubleshooting information
==
PLEASE !!!!
SEND ME MY LOGIN INFO I have an active email entry; but I've lost track of my Username over the years !
== Firefox version
==
3.6.6
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
== Plugins installed
==
*-Shockwave Flash 10.1 r53
*Adobe Acrobat Plug-In Version 7.00 for Netscape
*Office Plugin for Netscape Navigator
*np-mswmp
*getplusplusadobe16263
*Default Plug-in
*Delivery Network Acceleration by BitTorrent™
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

I hate it when updates break things instead of fixing them. Can't Mozilla leave well enough alone? At the very least, each new release should be tested so it works with ALL PREVIOUS extensions!
Wait till you "update" to firefox 4 and EVERYthing breaks, including the buttons that come with it. There is no arrow next to the dropdown button, right clicking the tab bar doesn't bring up the correct menu, but one as though it were the menu bar (which is missing) and the information bar is missing. True, it's fast, but you'll spend weeks getting it to work properly.

New power adapter dead after one charge cycle

hi guys.....
my power supply went a week or so ago... started to turn on and off then stopped completely...
i bought a new apple A1021 as an exact replacement to the previous...
plugged it in and got amber led then charged through to green and all functionality was as normal... problem sorted.... or so i thought....
came to it the next morning to find no led on.... so i checked fuse and swapped lead etc but no response....
phoned apple store mac docs whose answer was 'ummm i don't really know try resetting the pmu' which i have done but still no luck....
so my questions to you are:
1. is the new power supply faulty?
2. is there a problem with something shorting / feeding back into the power supply.... frying it?
3. is there an internal fault preventing charge / power? (although it did charge once)
4. a friend said it could be a faulty battery?
i don't know if you have come across this before but any help or suggestions would be greatly appretiated.... thanks

You may need to download and install the SMC firmware update:
http://support.apple.com/kb/DL1312?viewlocale=en_US

Display adapter problems after updating to Windows 10

Hello,
recently I updated to Windows 10 and I have an issue with my graphics card. In BIOS I have enabled the "Fixed Mode" that will allow me to have the graphics card always on. For some strange reason I cannot switch to my AMD Radeon HD 6700M gpu.Please help ! Thank you,
MIchael

Hi,
How about your network problem recently? if problem persists, you can follow the steps below to collect the scenario tracing and the WLAN logs.
1) Enable RAS Tracing on the client.
Over an Administrative command prompt.
C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
Over an Administrative command prompt.
C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
Over an Administrative command prompt.
C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
Over an Administrative command prompt.
C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Roger Lu
TechNet Community Support

Loosing T530 AC (Access Connections) + PM (Power Manager) Icons after Sysprep

Lenovo T530 (Windows 7, x64 SP1) Sysprep OOTB generalized
After the Sysprep, the system looses the Icons from the Access Connections (Version 5.85) and the Power Manager (Version 6.32) in the Taskbar. I can get them back, if i'll do a right click at the task bar and choose the AC and PM manually.
Is there a possibility that the symbols retained after the sysprep?
Solved!
Go to Solution.

Probably because the tools aren't added to the taskbar in "Default" user. Did you added the tools to the taskbar in Audit mode?
Though sysprep will not keep some settings. You may need to use `unattended.xml` to configure scripts to add those tools to the taskbar.
Just another question: does the PM tool appears in its factory state?

Why does my macbook only turn on when the power adapter is plugged in?

The battery life says its at 73% and climbing but whenever I unplug my power adapter the mac automatically shuts down and if I try to turn on the macbook without my power adapter plugged in, it wont turn on. How do I make it go back to where I can turn the mac on without it being plugged in? Thank you for your help!

I would try two things the first being resetting the System Management Controller:
1) If the computer is on, turn it off.
2) Disconnect the AC Adapter and remove the computer's battery.
3) Press and hold down the power button for 5 seconds and then release the button.
4) Reconnect the battery and AC Adapter.
5) Press the Power button to restart the computer.
If that doesn't work I would recalibrate the battery.
To calibrate the battery:
1) Plug in the MagSafe power adapter and fully charge the MacBook or MacBook Pro battery until the light on the MagSafe connector changes to green and the Battery icon in the menu bar indicates that the battery is fully charged.
2) Allow the battery to rest in the fully charged state for two hours or longer. You may use your computer during this time as long as the power adapter is plugged in.
3) Disconnect the power adapter with the computer on and start using it with battery power. When the battery's charge gets low, you’ll see the low battery warning dialog on the screen.
4) Continue to keep your computer turned on until it goes to sleep. Save your work and close all applications when the battery's charge gets low and before the computer goes to sleep.
5) Turn off the computer or allow it to sleep for five hours or longer.
6) Reconnect the power adapter and leave it connected until the battery is fully charged. You may use your computer during this time.

HT201300 can i buy Power Adapter Wall Plug Duckhead Charger for my macbook pro

I see and hear a spark every time I plug my MacBook Pro power adapter into an outlet. Now my charger is working but my duckhead adapter is not working. Where can i get a new adapter.

Apple Mac AC Power Adapter Wall Plug Duckhead Charger | eBay
Amazon.com: Apple Mac AC Power Adapter US Wall Plug Duck ...

IPod mini can't see firewire power adapter after 1.4.1 update

I updated my mini to the (infamous) 1.4.1 update, and now my firewire connection doesn't appear to work. When plugged into the computer with the firewire cable, mini doesn't appear on desktop or in iTunes, though it will start recharging the battery. When firewire power adapter is plugged into dock or into mini to try to recharge, it doesn't work. I purchased a new firewire cable & adapter but it's behaving the same way. USB cable to computer works fine (mini shows up on desktop and in iTunes). I've tried the Reset, Retry Restart, Reinstall, Restore. protocol several times with no success. I've tried Resetting the mini while plugged into the firewire power adapter. No luck.
Any suggestions?
Is there a way to uninstall this update?
g5 Mac OS X (10.4.4)

Thanks Chris - I did this, and am now running the earlier version of the software, but my iPod still can't see my power adapter. Any ideas about this?

Travel Adapter and iPod USB Power Adapter

I know this is going to sound like a stupid question but this is all new to me so please bear with me I just bought an iPod video, a World Travel Adapter kit and the Power Duo kit - which contains a power block wall charger, USB mini cable, and car charger. I was looking at the plugs in the travel kit and do not see how they work. The product data says that it works with the USB power adapter - which at this point I am assuming is different than the power block wall charger? Can someone verify this for me? Also, can someone then tell me how these travel adapters plug into the USB power adapter (or power block wall charger) so that they can be used when traveling overseas. I can't tell from the photo of the USB adapter how this would be done...I don't want to buy yet another power adapter if I don't need one, but I sure can't see how they work with what I have so far or how they would work with the USB power adapter..I would have thought that the travel kit would have some with everything that I need but apparently it doesn't.
Thanks in advance.
Leslie
ipod video Other OS

Now I have hooked it up to a PC without itunes on it. The ipods says it is charging but when you disconnect you can see that the battery level is even lower. Does this mean that I should just take back the ipod to exchange it for a working one?
Thanks

House Blew a Fuse, Power Adapter Fails

Well i just got this computer for christmas, so it's all brand new. Earlier today, the laptop was plugged in, on, and closed. Charging Just fine. The house blew a fuse. I went and reset the fusebox, now my magsafe (L style) poweradapter isnt coming back on. The laptop is fine.
I've left the power adapter alone for about an hour, tried different outlets (confirmed the outlets were powered), and the little green light still isnt coming on. Suggestions?

Hi, well my second 85w magsafe power adapter is fry now.... My first one (the original one) I have used for about 3 years, plug in 95% of his time to 110v or 220v. But few months a go he died on me. Same thing happened, the adapter was plug in to the outlet but not connected to computer, the house fuse blew for no reason at that moment, but later on that day when i try to recharge my laptop battery, surprise power adapter is was gone, fry, burn..... Now I got a new one $75 US, use it for 1 week and this one died on me today, I was working on my laptop and he warn me that, battery is low, I connected the power adapter and after few seconds the laptop told me again to connect the power line, battery is low... looking at the led light it was off and I........... exploded Now questions is there any problem with my laptop? My laptop looks that is working fine is getting little bit warm when working hard.... Power adapter needs to get warm to hot when charging or in use? Thanks!

Zen Power Adapter - Different Region Plu

I recently bought the Zen Power Adapter for my 6GB Creative Zen because I am going overseas to Poland for quite some time and need a way to charge my player without a computer. The Adapter came with a US region plug, and I figured I could just use the US to European plug adapters I already have. However, I noticed that, even though the AC adapter says it works between 00 and 240 Volts, the US plug is marked for 25 V. I am wondering if this matters? Will it still work with plug adapters for other regions? And if not (or even if so), how could I go about getting other region plugs for the Zen Power Adapter? Because if it's an easy process, I might do it anyway just to free up the region adapters for other electronics.
Thanks,
Poland

Hi ctfreak,
I recently bought the Creative Zen Uni'versal Power Adapter for my Zens, and it works perfectly in various European countries. It is white and comes with various adapters for the player and with several adapters for the plug part. I have used it in Germany, Spain with my ZEN 32 GB and my son is now using it in England with his Zen V plus.
I also have another uni'versal power adapter black in color for my ZENs which is made in China for Swiss Travel Products - I do not remember where I bought it, probably through ebay - which is very handy as it comes in one piece and the different shape plugs slide out when you press a button on the side; this is especially good for me as I tend to lose the bits and never know which plug adapters I need for which country. With this plug I have everything in one piece. It has a USB port, so you would have to bring the short cable. This one does not work with the Zen V plus, but works very well with the ZEN, so I gave the white Creative Zen Uni'versal Power Adapter to my son for his Zen V plus and kept the black one for my new ZENs.
Hope this helps you.
macqueline.

MacBook Pro using power adapter but not charging.

My MacBook Pro is plugged in w/the power adapter, the green charging light is on, but my battery percentage is only showing 15% and is not increasing. It was actually at 60% this afternoon...went to 22% and now is @ 15%.

Could be bad battery or faulty charger or faulty charging circuitry. Take it to an Apple store or AASP.

Frozen on plug in to mains power adapter icon after update

Similar Messages

Maybe you are looking for