Frozen out...

Ive had my N95 about a month now, and other than the problem with people not hearing me once or twice during calls, its been fine.
Tonigh though, it just froze..
So, I switched it off and back on again.
It vibrates a tiny bit when switching on and then the white screen comes up with NOKIA across the middle.
After a few seconds that disappears and the screen stays white until the back light goes off.
Then nothing.
I''ve tried several times now and I have took the battery out for 5 mins and tried again.
No luck.
The phone was an upgrade from orange, I really don''t want to have to send it back.
Any ideas????
Thanks in advance!

Come back sarah when you have something constructive to say.
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

Similar Messages

  • Ethernet connectability completely frozen-out by frozen SES-mode; WTR54GS

    On a reset i accidentilly hit the SES button, now on my ethernet connection, the "Secure Easy Setup" button is frozen white. i've browsed th web, found other people have encountered same problem.
    i've spent probably 100 hours, trying many fixes, including your company's suggestions -- to no avail! (note: multiple reset attempts still won't fix this).
    my PC and ethernet card work fine on other products, it's just that wtr54gs has now frozen me out by your proprietary SES-mode. i've tried, via the wireless set-up, assigning fixed ip ( e.g. : 192.168.16.100) to my ethernet + your suggsted 192.168.16.50 to re-flash firmware -- nothing works! can't even get a dhcp ip from wtr54gs,because the frozen SES-mode has my ethernet connectability completely frozen-out.
    re-flash firmware won't go on wirelessly either, a "failure" message appears like "not suficient system resources" -- **bleep**! -- on my Windows task manager networking screen i see i'm sending megabits of
    firmware data, but the wtr54gs only picks up about 10% of the sent amount -- seems the wtr54gs can't handle the speed my wireless adapter is sending it ( also connection is strong, i'm 4 feet away from it ). i don't know how to force data rate to go slower ( on ethernet card i've reduced rate + to half-duplex, but, of course that a no go, since the wtr completely has my ethernet connection frozen-out in the first place, my original concern!).
    i bought a D-link DWL-G730AP travel router, hoping theirs would be better, but it's very shoddy, very poor reception and difficult interface. i'm returning that. i long for the days when my Linksys product used
    to work -- Please Help Me Fix It !!!
    i used to use wtr54gs as a client-mode, connected to my PC via the ethernet connection, and the wtr54gs incoming internet connection was set to "wireless" -- all woked great, until this freezing-out problem.
    if the SES-mode is internally permanently freezing me out on ethernet connectability, it appears i'm going to have to get a replacement ( as, other people on the web, similarly-situated, have stated).
    my original purchase was about $60, but i see Amazon is recently selling the wtr54gs for $180!! -- i'm NOT buying a replacement at that cost!! please, either help me fix my frozen wtr54gs, or, since i'm
    covered by warranty, tell me the procedure to get a replacement / exchange.
    [Oh Thanks to Linksys for sending this to me!]: Thank you for your inquiry! As we strive to provide our customers with the best support experience, we are discontinuing the email support channel for Technical Support Inquiries.
    Linksys listened, and created a wide variety of tailored support options designed to get you what you need, when you need it, in a way that works for you!

    On a reset i accidentilly hit the SES button, now on my ethernet connection, the "Secure Easy Setup" button is frozen white. i've browsed th web, found other people have encountered same problem.
    i've spent probably 100 hours, trying many fixes, including your company's suggestions -- to no avail! (note: multiple reset attempts still won't fix this).
    my PC and ethernet card work fine on other products, it's just that wtr54gs has now frozen me out by your proprietary SES-mode. i've tried, via the wireless set-up, assigning fixed ip ( e.g. : 192.168.16.100) to my ethernet + your suggsted 192.168.16.50 to re-flash firmware -- nothing works! can't even get a dhcp ip from wtr54gs,because the frozen SES-mode has my ethernet connectability completely frozen-out.
    re-flash firmware won't go on wirelessly either, a "failure" message appears like "not suficient system resources" -- **bleep**! -- on my Windows task manager networking screen i see i'm sending megabits of
    firmware data, but the wtr54gs only picks up about 10% of the sent amount -- seems the wtr54gs can't handle the speed my wireless adapter is sending it ( also connection is strong, i'm 4 feet away from it ). i don't know how to force data rate to go slower ( on ethernet card i've reduced rate + to half-duplex, but, of course that a no go, since the wtr completely has my ethernet connection frozen-out in the first place, my original concern!).
    i bought a D-link DWL-G730AP travel router, hoping theirs would be better, but it's very shoddy, very poor reception and difficult interface. i'm returning that. i long for the days when my Linksys product used
    to work -- Please Help Me Fix It !!!
    i used to use wtr54gs as a client-mode, connected to my PC via the ethernet connection, and the wtr54gs incoming internet connection was set to "wireless" -- all woked great, until this freezing-out problem.
    if the SES-mode is internally permanently freezing me out on ethernet connectability, it appears i'm going to have to get a replacement ( as, other people on the web, similarly-situated, have stated).
    my original purchase was about $60, but i see Amazon is recently selling the wtr54gs for $180!! -- i'm NOT buying a replacement at that cost!! please, either help me fix my frozen wtr54gs, or, since i'm
    covered by warranty, tell me the procedure to get a replacement / exchange.
    [Oh Thanks to Linksys for sending this to me!]: Thank you for your inquiry! As we strive to provide our customers with the best support experience, we are discontinuing the email support channel for Technical Support Inquiries.
    Linksys listened, and created a wide variety of tailored support options designed to get you what you need, when you need it, in a way that works for you!

  • Frozen out of Business Catalyst?

    I'm trying to merge my account and I'm creating a new  Adobe ID account, but I get this error: "This Adobe ID email address is  already registered with Business Catalyst and cannot be merged with a  different Business Catalyst account."
    That error  message is displayed because the email address that you have chose when  trying to create the Adobe ID is already used as an Adobe ID, or is  already used in the Business Catalyst system.
    To solve this, enter another email address.
    this makes no sense...   just got this, after I signed in with my adobe id.  And Im frozen out?  need help?...  thanx

    I don't think this kind of sign in error can be solved by yourself.
    Adobe have a very handy chat support for BC-partners. If they can not solve your problem they can escalate it to other department of Adobe. The support whoever needs that you are able to use your  Adobe ID. If this is not the case, try using the public available form at http://www.businesscatalyst.com/contact to get in touch with a BC support member.

  • Screen Frozen out during installation of Linux redhat in Hyper-V vm

    Am new to hyper-v. I was trying to installing linux redhat but the screen frozen out. I didnt reach the options to select language. The was creen become frozen as if its painted with colors.
    please help

    Hello
    wich version redhat and hyper-v?
    https://hardware.redhat.com/&quicksearch=Microsoft
    sorry my english

  • I just downloaded IOS 8.5.3 on my iPad3. Now I cannot open it. Whenever I touch the screen Siri tells me what I am doing, but nothing works: I cannot enter my password and I cannot slide to open. I am frozen out from my iPad

    I just downloaded IOS 8.5.3 on my iPad3. Now I cannot open it. Whenever I touch the screen Siri tells me what I am doing, but nothing works: I cannot enter my password and I cannot slide to open. I am frozen out from my iPad

    you are right about the IOS number. I couldn't access my iPad so I guessed and guessed wrong about the number. It was the latest upgrade offered by Apple for my iPad, which I dowloaded and installed. I have done some sleuthing and discovered that some of the problems are the result of the Accessibility - Voiceover being activated. Once I figured that out, I was able to navigate somewhat better, though I now cannot turn Voiceover off. I slide the button and it just revert to On. The other problem I have now discovered that the iPad only rarely will accept my password. This is a password that I know and love and use many times during the day (as all of us iPhone and iPad users do) Now it seems to reject my password 80+% of the time. I would disable password protection if I could. I think I am going to have to talk to Apple directly but wonder if anyone else has had this kind of trouble with the newest IOS. It worked fine on my iPhone.
    I will try triple tapping the home button if I can ever get it opened again.

  • Frozen out menu ribbon in Word 2013 and cannot preview word documents in Outlook 2013

    I seem to be having a recurring problem with Word 2013 from Office Home Edition single user. When I try to put a caption on a table, the entire document page layout changes from portrait to something close to landscape and then the entire menu ribbon freezes
    out. I usually have to save the file, close and reopen using the open and repair feature as the document only opens in read only after this incidence happens. Since the first time I experienced this in early July, I haven't been able to preview Word files
    in office outlook 2013 and the protected mode feature hasn't worked since then either.
    Can I get some help with this please? I reinstalled, did online fixing and tried a few other fixes to no avail. Could it have started as a result of my installing a trial version of Office Visio which comes as a totally different package from my Home edition?
    Thank you

    ... When I try to put a caption on a table, the entire ...
    Is this the only action that will result in the issue? Does this happen to any Word documents?
    The first thing that I'd suggest you to do is to install any available updates to your system and Office installation, and then verify result.
    Then, please check if you have any add-ins integrated with your Word 2013 (please note that some programs might install add-ins automatically), try in safe mode and see if issue was caused by some add-in conflicts:
    http://office.microsoft.com/en-us/excel-help/work-with-office-safe-modes-HP010354300.aspx
    A Windows clean boot is also worth trying, it will help to determine whether background programs are interfering with your program:http://support.microsoft.com/kb/929135/en-us
    Thanks,
    Ethan Hua CHN
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Frozen out of old account - who can I contact?

    Hi,
    I unfortunately have two apple IDs. The first is "username" and the second is "[email protected]". They are both so old that I cannot even change them. Recently I have become locked out of the "username" one. Now, when I sync my iPad or iPod it says that some of my apps and songs will be deleted.
    When I go to change the password I have 2 options. The first one is to sent a new password to my email account - which has been cancelled for more than a year so that will not work. The second is to access the account with personal information. It's asking for my date of birth but for some reason it does not accept my date of birth. Either the account is so old that they did not require dates of birth back then or I put in a false date of birth to conserve my privacy. Either way, I now have no access to this account.
    My question is how can I actually contact someone at apple to go in and manually change my email or date of birth?
    Thanks,

    Hi red river,
    Please let us know which Adobe service you are facing problem with.
    And when you trying to log back in what is the message that you are getting.
    Please send me the Adobe id (Email address registered with Adobe) using private message option on forum and i will check the status for you.

  • Hulu takes up all the bandwidth - other users frozen out

    I've got a Time Capsule N router (not the current generation, the one just before it). I can't figure out why, but if someone on the network is watching Hulu, then the net goes down for everyone else (specifically me! lol). It's so strange. Once Hulu stops, then either I have to unplug the Time Capsule and plug it back in, or I have to wait about 5 minutes before it starts working again for me.
    Thoughts?

    This is "normal" behaviour for an internet connection and not really any fault of the Time Capsule.
    Basically Hulu is taking all the internet bandwidth, stopping everyone else from using the connection.
    You could configure the person's computer on the network to restrict their bandwidth so that it isn't monopolising the bandwidth when running.
    A fair few ways to do this.

  • Hello I am getting some nasty popups on safari. looks like malware. virtually all menus on safari are frozen out. Search with firefox and followed some directions to use the activity monitor to force quit these processes and it was no use.

    malware on safari. tried activity monitor > force quit but they just popped back up. Please help.

    wow thanks holding down the shift key worked. Is there anything else I should do know?
    The problem wasn't in quitting safari but everyone time I opened it, that crap would pop up. Should I be able to use it now without holding down shift?

  • Frozen out with "script unresponsive" box up; can't quit app.Help!!

    FF locked up with dialog box open saying "Warning: Unresponsive Script"
    I can't do anything on FF and can't quit it. If I need to uninstall and reinstall, how do I save my bookmarks?
    Thanks for any help you can give me,
    Ann
    Note: If you send me help info, don't use FF! I can't receive it there. Have Safari up right now.

    Does the message say what script? Did you get any crash warnings
    from Firefox?
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences'''<Enter> in the address bar
    Select '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • Ipad frozen out after upgrade

    Evening every one...have updated my daughters ipad 3 to the new ios today and a little while ago she has gone to use it and the unlock slide is not working or the turn off. It updated ok as i connected to iTunes and it shows all up to date but we just cannot access the ipad. Any suggestions? Thank you. Nigel

    Try the following:
    1. Restore:
    http://support.apple.com/kb/HT1414
    2. Recovery:
    http://support.apple.com/kb/HT1808

  • Please help - Totally locked out of T61

    Bottom line:
    I am totally frozen out of my T61, stuck at the BIOS. I can apparently do absolutely nothing, including access info on the primary HD or the secondary HD in the DVD slot.
    I now get this error after the laptop recognizes my fingerprint: <Error 0199 - System Security. Security password retry count exceeded>
    The BIOS settings are at the bottom of this post, if that helps.
    The only possible things that I know of that you could use to help me are:
    The Lenovo does actually recognize my fingerprints, which apparently means zippo.
    My two Windows administrator passwords worked find until this locked me out totally.
    I do have hardware so that I can attach these two hard drives to other machines, where I have been able to read/write to these drives, at least until now.
    ===================
    HOPEFULLY RELEVANT HISTORY.
    About a year ago I remember exploring the password functions on my T61. Probably getting too cute. But it never bit me on the butt until now. I am beginning to realize how much I didn't know then, learning today that there are 3 different passwords IN ADDITION to my Windows password. Oops.
    It appeared today that my biometry hardware is getting dicey. Sometimes it would recognize this finger, other times not, sometimes that finger, then not. So I started wandering around in the security part of CSS, trying to see what I would have to do if the biometry froze up on me completely. 
    That is when I discovered that apparently I created a supervisor password. Apparently much worse, at one point in the last 5 hours of trying to figure out what was going on I typed in what I thought might be the correct supervisor password too many times. 
    My backup plan was apparently misguided and has failed - I have a second HD, with one of the partitions a bootable WinXP partition, but when I swap in that one (normally in the DVD slot) for the primary HD, this error STILL crops up and I am still frozen, can't get past the BIOS.
    Smelling possible disaster, I was in the process of backing up all of the data on that HD to the second HD when my machine went into hibernation before it totally locked me out! Agh agh agh. It had filled up about 50 GB, my hope is that what I truly need is now on this secondary drive.
    Rant: I can do NOTHING?! This has totally frozen me out of EVERYTHING? My T61 is TOAST? This is really me, the one-and-only-ever owner of this laptop, probably no one that was stupid enough to try to steal this semi-obsolete laptop could have screwed this up so totally. My incredulity is high. Doesn't anyone remember the reason for the UNDO function, or the purpose for "idiot proof"? I am close to dropping this Lenovo on its head to see if it has a change of heart or giving it ECT treatment, which would be equally helpful, but mostly thinking about buying a different very non-Lenovo laptop, yesterday. If I screwed up once, by thinking that more security was better than less, this machine should be more forgiving than this, especially if it recognizes my **bleep** fingerprint. At least Dell hardware was reliable, even if I couldn't understand tech support. Enough rant.
    ===================
    Any help humbly and gratefully accepted. I'm going to go blow off some steam but keep checking here to see if any kind soul will be merciful. I have just wasted too many hours that I needed to be spending on getting ready to teach on Monday. If I need to bail on that ****** laptop totally then it would be very helpful not to pour more hours down this rat-hole.
    Thank you,
    - Befuddled, with blood pressure rising
    =====================================
    Using passphrase          ENABLED
    Supervisor password    ENABLED
    Lock BIOS      ENABLED
    Set min. length  12 characters
    BIOS password at unattended boot      ENABLED
    Power-on password     ENABLED
    HD1 password             User+Master
    HD2 password             Disabled [this is my secondary HD in DVD slot]
    Password reset  service            ENABLED
    Status               IN PROCESS
    Solved!
    Go to Solution.

    Well I have a lot of success to report and a big mystery still unresolved.
    I'm typing from my Lenovo!! I'm able to get into Windows, access all information (fingers crossed) on my hard drive, and found out that I had succeeded in backing up most of my important information to that secondary drive.
    Before I reply to and digest your last two posts I need to take a sharp detour to want to make certain that I have successfully backed up everything off of my primary HD, and then I will come back here and report. So it will be a while until I post again, maybe even a few days because I have to catch up work that didn't happen today.
    But I wanted to let you know what happened and what worked.
    ==================
    This is how I succeeded in getting into my system.
    First and possibly most importantly, I was documenting every step that I was taking in order to report in here, and so by doing that it occurred to me, "Why this step?" and not another.
    These are the steps that I recorded in order to show that I kept getting to this 0199 error no matter what I did.
        > Turned on machine normally
        * It prompted me to "swipe finger to authorize access"
        > Swiped finger
        * It showed and skipped the 'power on' and 'hard drive' passwords, since I had successfully figured those out
        * It shows me a nasty looking screen saying:
              ERROR: 0199 System Security
              security password retry count exceeded
        * Press [F1] to get into setup utility
        > I press F1, get into setup utility, which is a total dead end where I can affect *nothing*
    If I then reboot the whole process recycles
    What I did that got me out of this mess was to press <Esc> instead of [F1]. It occurred to me that I didn't have to press F1.
    Eventually, once the system got through some momentary confusion, mostly based upon the fact that the secondary drive wasn't hooked up, I got into Windows.
    ==================
    So I am going to log out for a while until I feel reasonably secure that I have backed up my data. I will come back here to follow up, because I don't think that this 0199 error is going anywhere.
    Also I think that I hit "this resolved the problem" by mistake a second ago on your last post. If I did then that was a mistake, because it would be better to do that for whichever one of these posts would point people best in the right direction. Would you help me out with that? Since you are the moderator you will have a better sense of that.
    Of course it depends on how you define "the problem"! Getting back into my data, programs etc. certainly does seem like the real success. But this 0199 error is a real problem.
    Should I split off a different thread about the 0199 error?
    =================
    All of that said, hip hip hooray!
    After a touch of exuberance I will get my nose back into the tedious work of backing up my machine.

  • IMac 24" Leopard frozen on desktop

    Hello,
    yesterday the computer just froze on the desktop page. The mouse arrow moves, and when I move the arrow to an icon, it's name pops up, but I can't enter anything, including the Apple icon to force shutdown. I called Apple Support in France, where I live. After shutting off with power button, unplugging and replugging in the system, we tried the command, alt, p and r keys as I started the system up, waited for the three chimes, let it go, but the system then went to desktop but was still in the same "frozen" out state. Next step was to turn off the computer and turn it back on, hold down the "C" and then we were maybe going to try to put in the Leopard upgrade disk and attempt a cure from there, but either I was doing something wrong, or in spite of holding down the "C" key until I saw the Apple logo and spinning wheel during start-up, and then releasing the "C" key, the computer just continued through start-up until opening to the desktop page and we are still in the frozen state. A week or so ago I did buy a mighty mouse bluetooth mouse, but it seems to be functioning fine. The Imac was also attached to a second lcd screen, which still functions as before, although I turned it off once the problem started. A few weeks ago I added 1 gb of Ram, but I Istat tested it almost everyday just to be sure that the system recognized and functioned properly. The machine is only a few months old and has worked pretty flawlessly, except from time to time the Microsoft for Mac "Word" didn't respond. I basically do internet suring and writing, whether on word or powerpoint. No heavy usage.
    Any recommendations to get me back on track. Will I have to do a complete re-install? If so, can I retain my data? Or is this machine in need of Apple repair?
    Thanks

    Thank you for your questions. The keys seemed to work when I pressed the Cmd, alt, P and R at startup, followed by the three chimes. I did notice that when I pressed the enter key, the name under the Hardisk icon opened, as if I was to rename the icon. I was so busy with the Apple Help, I didn't bother to plug in my USB mouse to see if was possibly the bluetooth mouse that was not clicking to open icons or files. A friend thought it might be the bluetooth mouse that was not clicking properly.
    Unfortunately, I'm not in France for the next 4 days where the computer is, so I don't know if the cap lock, and keyboard work properly, or whether it's the bluetooth mouse or not. The fact that when I pressed the "C" key at startup and I wasn't able to stop the normal startup led the apple support person to believe that something big was wrong. Perhaps it simply the mouse that wasn't clicking....if I'm lucky...or maybe the keyboard. My friend that that if the machine, each time, booted up normally, that perhaps I won't need major work or a re-install.
    What are my chances here?
    Thanks again, and I'll post the results of both using the usb mouse and your suggestion on the keyboard Monday.

  • IPad stuck on message "hasn't been updated in 3 weeks."  I can't get out.

    My new iPad is stuck with a box "iCloud Backup: This iPad hasn't been backed up in 3 weeks..."  I'm frozen out.  The "OK" button doesn't work.

    Try Here  >  https://discussions.apple.com/message/17090736#17090736

  • I reset my Apple password AGAIN, but still am unable to sign into iCloud and have been frozen.

    I need to buy more storage but have been frozen out of my iCloud account as it won't accept yet another updated Apple password. I also need to update my user name as it is a former email address. Any suggestions? This is so aggravating!

    I tried the reboot, but iCloud is still not accepting my password. I'm thinking I must have a different password for iCloud but it's not accepting any that I've used or ever used. Grr! Will have to call support.

Maybe you are looking for