Frozen screen and emitting series of 3 loud beeps.
My Mac is suddenly freezing and emitting series of 3 loud beeps.It's not when I start up and seems to happen randomly. Sometimes I'm doing bunch of things, but sometimes I'm not doing anything (and have no other programs open) except watching a movie. (one that was already on my computer, not one i'm streaming)
Each time it does this I have to shut my computer down and restart it atleast twice before it'll work again. Help!!!
PS i just had the logic board replaced a few days ago, could it have something to do with that?
But it's not when I start the computer. It's starts fine and then once it's been running for awhile it freezes and emmits the beeps, Almost claxon like sounds. It also doesn't do it everytime i'm using my computer, or when i'm doing something specific.
Similar Messages
-
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store. -
How do I fix a blank screen and a series of 3 beeps in Snow Leopard at start up?
How do I fix a blank screen and a series of 3 beeps in Snow Leopard at start up?
http://support.apple.com/kb/ht1547. Step one is to run the Apple Hardware Test suite, extended tests at least twice, followed by Rember.
-
Xorg / catalyst / kernel upgrade - Frozen screen and input [SOLVED]
I knew it, never upgrade xorg/graphic drivers when using ATI cards, just bless your god when it works and never touch it again. But I got tempted and I did a full system upgrade, and now... my xorg is broken.
I'm using ATI proprietary drivers catalyst 8.12-1 with xorg 1.5.3-3. My card is an ATI x1950 pro.
It used to work perfectly, but since the update, when i startx I just get a terminal (because of my .xinitrc) in fullscreen without my window manager getting launched, and my mouse in the middle of the screen; and nothing responds the mouse won't move, even ctrl+alt+backspace won't work. I have to ssh on my machine and 'killall X'.
I tried starting off with a default config (using aticonfig --initial -f), but still the same problem.
I have a dual screen setup.
I disabled AIGLX and Composite, but no success.
If I fail to repair this, since I made a backup of my pacman database, I could revert it right ?
Please help us, us pwned ATI users !
Here is the /var/log/Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux fatale 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 13 03:36:24 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "ScreenSamsung" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "Xinerama" "true"
(**) Option "AIGLX" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling PS/2 Mouse
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc RV570 [Radeon X1950 Pro] rev 0, Mem @ 0xe0000000/0, 0xf5000000/0, I/O @ 0x00008000/0, BIOS @ 0x????????/131072
(--) PCI: (0@1:0:1) ATI Technologies Inc RV570 [Radeon X1950 Pro] (secondary) rev 0, Mem @ 0xf5010000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(--) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x7280) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x9377518
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "dri" "true"
(**) fglrx(0): Option "KernelModuleParm" "agplock=0"
(**) fglrx(0): Option "RingSize" "8"
(**) fglrx(0): Option "EnableDepthMoves" "yes"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "Radeon X1950 Series" (Chipset = 0x7280)
(--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x0762)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xf5000000
(--) fglrx(0): I/O port at 0x00008000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "on"
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.13
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV570
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000090, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: NUL Model: 1 Serial#: 1
(II) fglrx(0): Year: 2001 Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 31 vert.: 23
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.597 redY: 0.343 greenX: 0.316 greenY: 0.566
(II) fglrx(0): blueX: 0.153 blueY: 0.131 whiteX: 0.310 whiteY: 0.328
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 65.0 MHz Image Size: 304 x 228 mm
(II) fglrx(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1184 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) fglrx(0):
(II) fglrx(0):
(II) fglrx(0): Monitor name:
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff003aac010001000000
(II) fglrx(0): 010b0103081f1700caf0649857519127
(II) fglrx(0): 214f54afce0001010101010101010101
(II) fglrx(0): 010101010101641900a0400026301888
(II) fglrx(0): 360030e410000018000000fe000a2020
(II) fglrx(0): 20202020202020202020000000fe000a
(II) fglrx(0): 202020202020202020202020000000fc
(II) fglrx(0): 000a202020202020202020202020000e
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Connected Display2: DFP on secondary TMDS [tmds2i]
(II) fglrx(0): Display2 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 1e5 Serial#: 1212821817
(II) fglrx(0): Year: 2006 Week: 7
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HMEL205539
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2de50139314a48
(II) fglrx(0): 0710010380261e782ade95a3544c9926
(II) fglrx(0): 0f5054bfef8081808140714f01010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000fd00384c1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 00484d454c3230353533390a20200056
(II) fglrx(0): End of Display2 EDID data --------------------
(WW) fglrx(0): More than one displays are connected,so clone mode is enabled
(II) fglrx(0): Primary Controller - DFP on secondary TMDS
(II) fglrx(0): Secondary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 574/682MHz @ 0Hz [enable load balancing]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 24 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024_mine": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024_mine"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024_mine": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024_mine"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720"x50.0 60.46 1280 1328 1456 1632 720 721 724 741 +hsync (37.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
[.. Millions of ModeLine's..]
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): Ring buffer size: 8 MB
(**) fglrx(0): KernelModuleParm: "agplock=0"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x4d000
(II) fglrx(0): [drm] mapped SAREA 0x4d000 to 0xb7af0000
(II) fglrx(0): [drm] framebuffer handle = 0x4e000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.56.4
(II) fglrx(0): Date: Dec 1 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x0004f000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2256
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 80
(II) fglrx(0): GLESX is enabled
(**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
32 128x128 slots
14 256x256 slots
5 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(WW) fglrx(0): Option "AccelMethod" is not used
(WW) fglrx(0): Option "AccelDFS" is not used
(WW) fglrx(0): Option "GARTSize" is not used
(WW) fglrx(0): Option "BufferSize" is not used
(WW) fglrx(0): Option "UseFBDev" is not used
(WW) fglrx(0): Option "ColorTiling" is not used
(WW) fglrx(0): Option "RenderAccel" is not used
(WW) fglrx(0): Option "SubPixelOrder" is not used
(WW) fglrx(0): Option "DynamicClocks" is not used
(WW) fglrx(0): Option "PCI:1:0:0" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: drmOpenMinor returns 14
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Shutdown CMMQS
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x4d000 at 0xb7af0000
Thanks :)
edit: weird thing (or not) but DPMS (or whatever it is, the thing that turns off my monitor after some time) seems to work, altough moving the mouse or pressing the keyboard doesn't wake up the screen. Has this something to do with my mouse and keyboard not being recognized by xorg ?
edit2: omg yes it is ! I added:
urxvtc -e 'screen'
so when I startx an un-window-managered fullscreen terminal launches with a screen session, and if I ssh on it I can type in this terminal from another computer, and the screen actually displays what I'm typing, so that's definitely an input problem !
Final Edit: Well all solved, concerning the "frozen" stuff, it was just that my keyboard and mouse weren't detected because of the new hotpulg thingy (check http://wiki.archlinux.org/index.php/Xor … otplugging for more info, or just add 'hal' to your rc.conf), then restored my original xorg.conf, rebooted and it all went back to normal (: ). Hope this helps.
Last edited by arsenist (2008-12-13 03:28:42)Has this something to do with my mouse and keyboard not being recognized by xorg
Hmm, I wonder what it would reveal if someone read the news? http://www.archlinux.org/news/424/
Even your Xorg.0.log is telling you the problem.
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling PS/2 Mouse
Last edited by jacko (2008-12-13 03:28:40) -
Random frozen screen and shutdowns
Hi,
I'm working on a 2009 Mac Pro updated to 5.1 with a new six core cpu and a EVGA mac version GTX 680. I randomly have a frozen screen, but I can access the mac via network. Sometimes the mac reboots it self. Temperatures seem normal (cpu 37 degrees) This problem allready occured using 10.8. Normally at start up I have to stress the GPU to lower the pci fan. Starting at 1300rpm after running GLview test running at 800rpm
I allready:
- replaced the GPU from slot 1 to 2 and vice versa
- Replaced the GPU for a pc GTX670 same problem
- cleaned the machine
- Took everything out and put it back again
- Did a complete new system install on a new drive
- Did anvram reset
- Did asmc reset
etc
When I go back to my old ati 4870 I don't have this problems. So I think it's the card or the drivers. Can anyone make something out of this crash log?
tia
Anonymous UUID: 7ADDF765-C0D5-CDAE-96E0-D9954A1EF6E7
Mon Nov 4 20:47:40 2013
panic(cpu 6 caller 0xffffff7f9adc7d0d): NVRM[0/5:0:0]: Read Error 0x006100c0: CFG 0x118010de 0x00100406 0x8a000000, BAR0 0x8a000000 0xffffff817bd2c000 0x0e4000a2, D0, P3/4
Backtrace (CPU 6), Frame : Return Address
0xffffff81726ebc00 : 0xffffff801a022f69
0xffffff81726ebc80 : 0xffffff7f9adc7d0d
0xffffff81726ebd40 : 0xffffff7f9ae94e26
0xffffff81726ebd80 : 0xffffff7f9b05a63d
0xffffff81726ebd90 : 0xffffff7f9ae68b04
0xffffff81726ebdb0 : 0xffffff7f9af0d6e2
0xffffff81726ebe30 : 0xffffff7f9adaff20
0xffffff81726ebef0 : 0xffffff7f9ad7ca1c
0xffffff81726ebf20 : 0xffffff801a04a15a
0xffffff81726ebfb0 : 0xffffff801a0d6aa7
Kernel Extensions in backtrace:
com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f9ad77000->0xffffff7f9afe1fff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f9a6ba000
dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f9ad67000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f9a79b000
com.apple.nvidia.driver.NVDAGK100Hal(8.1.8)[3CF8C2FA-83E6-39E3-A5B7-C7CC839B8C7 5]@0xffffff7f9afec000->0xffffff7f9b19bfff
dependency: com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f9ad77000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f9a6ba000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000019e00000
Kernel text base: 0xffffff801a000000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 142370407640
last loaded kext at 44569070621: com.nvidia.CUDA 1.1.0 (addr 0xffffff7f9b9cd000, size 12288)
loaded kexts:
com.nvidia.CUDA 1.1.0
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 9.9.
com.apple.filesystems.ntfs 3.11
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.2fc2
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.GeForce 8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleHWAccess 1
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleRAID 4.0.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.Intel82574L 2.6.1b1
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBUHCI 650.4.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.kext.triggers 1.0
com.apple.driver.IOBluetoothHIDDriver 4.2.0f6
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBAudio 2.9.3f17
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.nvidia.driver.NVDAGK100Hal 8.1.8
com.apple.nvidia.driver.NVDAResman 8.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0Anonymous UUID: 567B54E6-778F-6FA6-2F8C-A4DA16938570
Mon Jan 27 08:10:22 2014
panic(cpu 14 caller 0xffffff80072dc19e): Kernel trap at 0xffffff800710e058, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x000000004093c000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000010, RCX: 0x0000000000000b40, RDX: 0x0000000000005a00
RSP: 0xffffff81bd433ac8, RBP: 0xffffff81bd433b00, RSI: 0xffffff801c589c70, RDI: 0x0000000000000000
R8: 0x0000000000006000, R9: 0xffffff8031f1b880, R10: 0x0000000000000000, R11: 0xffffffffffffffff
R12: 0xffffff802f514000, R13: 0xffffff801c589c00, R14: 0xffffff801c589c00, R15: 0xffffff802f514000
RFL: 0x0000000000010202, RIP: 0xffffff800710e058, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0xe
Backtrace (CPU 14), Frame : Return Address
0xffffff81bd433750 : 0xffffff8007222f69
0xffffff81bd4337d0 : 0xffffff80072dc19e
0xffffff81bd4339a0 : 0xffffff80072f3606
0xffffff81bd4339c0 : 0xffffff800710e058
0xffffff81bd433b00 : 0xffffff7f89203ed6
0xffffff81bd433b50 : 0xffffff7f8920461e
0xffffff81bd433b90 : 0xffffff80076cd6dd
0xffffff81bd433bf0 : 0xffffff80076cb28f
0xffffff81bd433d40 : 0xffffff80072b6008
0xffffff81bd433e50 : 0xffffff8007226bb1
0xffffff81bd433e80 : 0xffffff80072139b5
0xffffff81bd433ef0 : 0xffffff800721e003
0xffffff81bd433f70 : 0xffffff80072c921d
0xffffff81bd433fb0 : 0xffffff80072f3e26
Kernel Extensions in backtrace:
com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C 5]@0xffffff7f891e6000->0xffffff7f8923efff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f877e8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f87db8000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000007000000
Kernel text base: 0xffffff8007200000
System model name: MacPro4,1 (Mac-F221BEC8)
System uptime in nanoseconds: 37661706518483
last loaded kext at 250801958365: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f88790000, size 65536)
loaded kexts:
com.kaspersky.kext.mark.1.0.5 1.0.5
com.kaspersky.kext.kimul.44 44
com.eltima.ElmediaPlayer.kext 1.58
com.nvidia.CUDA 1.1.0
org.virtualbox.kext.VBoxUSB 3.1.2
org.virtualbox.kext.VBoxDrv 3.1.2
com.kaspersky.nke 1.6.2a12
com.logitech.driver.LogiGamingMouseFilter 1
com.kaspersky.kext.klif 3.0.2a39
com.eltima.SyncMate.kext 0.2.5b15
com.driver.LogJoystick 2.0
com.Logitech.Unifying.HID Driver 1.2.0
com.Logitech.Control Center.HID Driver 3.4.0
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.GeForceTesla 8.1.8
com.apple.GeForce 8.1.8
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleLPC 1.7.0
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.PioneerSuperDrive 3.3.5
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.Intel82574L 2.6.1b1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBUHCI 650.4.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.nvidia.driver.NVDAGK100Hal 8.1.8
com.apple.nvidia.driver.NVDAResman 8.1.8
com.apple.driver.AppleUSBAudio 2.9.3f17
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.iokit.IOSurface 91
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacPro4,1, BootROM MP41.0081.B07, 8 processors, Quad-Core Intel Xeon, 2.26 GHz, 14 GB, SMC 1.39f5
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Graphics: NVIDIA GeForce GT 120, NVIDIA GeForce GT 120, PCIe, 512 MB
Memory Module: DIMM 1, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 2, 1 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463132383732415A2D314731443120
Memory Module: DIMM 3, 1 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463132383732415A2D314731443120
Memory Module: DIMM 4, 1 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463132383732415A2D314731443120
Memory Module: DIMM 5, 4 GB, DDR3 ECC, 1066 MHz, 0x859B, 0x435435313237324241313036372E4D313846
Memory Module: DIMM 6, 1 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463132383732415A2D314731443120
Memory Module: DIMM 7, 1 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463132383732415A2D314731443120
Memory Module: DIMM 8, 1 GB, DDR3 ECC, 1066 MHz, 0x802C, 0x394A53463132383732415A2D314731443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 3 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: NVIDIA GeForce GT 120, Display Controller, Slot-3
Serial ATA Device: HL-DT-ST DVD-RW GH41N
Serial ATA Device: PIONEER BD-RW BDR-203
Serial ATA Device: Samsung SSD 840 PRO Series, 256,06 GB
Serial ATA Device: SAMSUNG HD103UJ, 1 TB
Serial ATA Device: SAMSUNG HD103UJ, 1 TB
Serial ATA Device: SAMSUNG HD103UJ, 1 TB
USB Device: USB2.0 Hub
USB Device: iPhone
USB Device: Logitech G35 Headset
USB Device: G19 Gaming Keyboard
USB Device: G19 Gaming Keyboard
USB Device: USB2.0 Hub
USB Device: Hub
USB Device: USB2.0 Hub
USB Device: USB2.0 Hub
USB Device: USB Receiver
USB Device: Hub
USB Device: Display iSight
USB Device: Apple LED Cinema Display
USB Device: Display Audio
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
Thunderbolt Bus: -
HT201401 my iphone has a frozen screen and it does not turn off to reset. what do I do?
My iphone has a frozen screen. It will not turn off to reset. What can I do?
Press and hold the Home and Power buttons for 15-20 seconds until the white Apple logo appears to reset the device.
-
AHHHHHHH!!!!!!! frozen screen and reset loop of death.....
ok so my iphone froze the other day...i hit all kinds of buttons and nothing would work until i used the slee/home button reset...it worked but then a few mins later i pushed the sleep button to wake up the phone and the screen flashed many multicolored vertical lines (sort of like when your tv loses reception)and then proceeded to fully reset the phone bringing up the apple icon and finally to the home screen...when i use the phone from there everything works fine, or even if i hit the sleep button to turn it off and then i hit it again to turn it right back on im fine, however if i leave it "asleep" for about a minute or so and then try and wake it up...the whole process repeats with the horrible screen and reset...i've tried all the resets in the phone with and without erasing content, and i even tried the restore once but still it's jacked up....any thoughts? has anyone heard of this?
I managed to give my phone these symptoms, but as I'd just made a settings change, I managed to switch it back and the problem went away:
I set Mail to automatically check for messages, rather than only manually.
As soon as I exited the system preferences, the phone froze. It would then come back for a few seconds, then freeze again.
I couldn't switch the phone off, and when the unlock screen appeared, the "slide to unlock" text didn't "pulse" like it normally does.
The on-off button took me to the home screen (for some reason) and, by waiting after each "button" press for 10secs for it to take effect, i managed to switch back to manual email checking.
As soon as I did this, the problem disappeared.
I don't know if this relates in any way to your problem, but you never know...
good luck.
Message was edited by: Tim van Someren -
While using NetFlix the screen on my Macbook Air froze and now there is this continous beeping sound. There's no cursor and I can't shut it down. Any suggestions??
Press the power button for 10 seconds or more.
Computer will shut down.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
Frozen screen and alarm after startup
I have older laptop in the Satellite series running XP. When it starts up it will load the blue Toshiba screen but then freezes and will go no further. There is also a continuous "ding,ding,ding......" alarm sound. The F2 and F12 keys produce no change, nor does the "c key" when I try to install the system restore disc (starts to load and then stops). Response is the same whether running on battery or ac. Anyone know what all the above means? Many thanks!
Try this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
FROZEN SCREENS AND STILL FREEZING ON KIDS TV OPTIO...
Possibly related to the current software update but my youview box keeps freezing on the menu screens... the only option i have is to reset the box.. Also noted that the box seems to keep losing the interenet connection for some reason and as mentioned in some messages i'm also getting the screen freezing when i go into the kids tv options....
what is going on ? Can anyone from BT enlightened me with an answer which will solve my problems ??
I am obviously not getting the service I'm paying for so starting to think that switching back to SKY might be my only optionHi Guys
Send us in your details using the contact us form in my profile. It's in the section 'About Me' and we can have this looked into.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Frozen screen and won't restore properly
Decided to transfer new songs onto ipod shuffle from itunes. When tried to listen absolutely nothing on ipod (past and present songs). Itunes told me to restore. I did and now keeps telling me to do this continually. When eject safely I have a message frozen on my ipod and I cannot switch it off. Message is "ok to disconnect" with a big tick. What do I do??
Have managed to turn it off finally but now I can't turn it on. Any answers about the restore problem??
-
HT201270 Frozen Screen and no on/off buttom capability
I have a 4s and my on/off button stopped working about 6 months ago and now today my screen froze and I cannot do anything. Any help?
Hi jlamppa,
If the sleep/wake button your your iPhone has stopped working completely and that is preventing you from resetting your device now that it is not responding, you may need hardware service. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden -
I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
How to restore an iPad mini with a frozen screen and no touch activity?
The iPad has already be restarted by using the power and central button but after restarting problem remains....
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can't turn on my iMac. Keeps beeping.
Is it 3 beeps then stops then 3 beeps again? If it is that is a RAM error.
Look here for details on the beep codes.
http://support.apple.com/kb/HT5860?viewlocale=en_US
Maybe you are looking for
-
I need help with slow macbook STILL
still having serious speed issues.. slow shutdown slow startup and seem to be errors.. I am a novice with apple and do not know what any of this means so help would be very much appreciated.. I have tried many things suggested but still have issues 6
-
I can't get my Norton Identity Safe Toolbar to shows up .
-
hi there I wonder I have new server ( dell r620 with e2620) with 2 raid volumes 1 mirror system 2 disks (sas) 2 raid 5 data 3 disks ( sas ) the server run 2012 (clear with any applications ) now I want to install new server (vm) run 2008 r2 and to
-
Storing pairs of files that are identical except for file type
I want to store Word 2010 docx and PDF versions of the same document in SharePoint Online. The Word version should only be visible to members of the engineering department. The PDF version should be visible to everyone in the business. Apart from fil
-
Can't get rid of Thin line at bottom of images
<a href="about.html"><img src="images/HOMEPAGE/homepage_title.png" alt="Get Started" class="columns" title="Get Started"/></a><br> <br> Hi, I can't figure out why my homepage images have a thin line at the bottom of the image. The image itself is