Frozen screen. Running snow leopard ?
Frozen screen running snow leopard maybe . Lion ?
Hold the power button down and force a hardware shutdown.
Reboot and tell me what you see.
Similar Messages
-
Why doesn't Firefox respond to the green zoom button on my Mac running snow leopard?
For some reason my Firefox is not responding to the green zoom button on upper left of my Mac's screen (running snow leopard). The screen fonts, graphics etc. are way too large , and I would like to reduce size of all design elements -- especially for AOL -- using this feature or some other feature. BTW -- the green zoom button works for Safari, although the text and graphics size is a readable, small size in various screen sizes on Safari.
Can you help? BarryTry to modify the ui.trackpoint_hack.enabled pref on the about:config page from the default value -1 to 0 or 1 to see if that makes the touch pad work better.
Close and restart Firefox after changing the ui.trackpoint_hack.enabled pref.
*<b>about:config</b> page: ui.trackpoint_hack.enabled (-1)(-1:autodetect; 0:off; 1:on)
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config -
I have a new l7 Macbook Pro running snow leopard. When I tried to to install windows 7 32 bit on bootcamp, I kept getting a flicking black and blue screen when it tried to install. (Tried several times). I finally downloaded the bootcamp windows support to a flash. I inserted that and finally got it installed. Now when I try to boot into windows I get either a solid black (sometimes blue) or flickering screen and windows will not start up. If I then physically shut down the mac and restart, it will finally boot into windows where it tells me that windows was shut down unexpectently and once I click start windows normally, it will boot up. That will generally let me boot into windows for the remaining of the day. The next day, the same thing happens again. I have tried reinstalling several times, and the same thing keeps happening. It is not my windows disk because it installs flawlessly on the mid 2008 macbook pro. Anyone know how to fix this?
I own HDM 2011. But they have products that aren't listed or hard to find too.
Recommending Pro version for one user's needs:
http://www.wilderssecurity.com/showthread.php?t=297756
Pro vs HDM 2011 feature comparison
http://www.paragon-software.com/home/hdm-personal/comparison.html
Forum topics:
http://www.wilderssecurity.com/showthread.php?t=297756
http://www.wilderssecurity.com/showthread.php?t=303155 -
Has anyone worked out how to fix screen flicker on MBP late 2010 running snow leopard?
Hey, I have a MBP late 2010 (MacBookPro6,2) running Snow Leopard 10.6.8 and I'm having trouble with external screens. They work fine 70% percent of the time but the rest of the time there is intermittent flickering. This I have determined is a something with the computer and not the screen as other computers work on the screens without fault and the problem occurs on multiple screens when using the same laptop. This is a video of the flickering, http://youtu.be/vvAlhDQD7iw . I think it might be something in Snow Leopard as the problem does not persist when I'm using bootcamp. I think the flickering might have started after one of the Snow Leopard updates (10.6.4 maybe?) but this is not definate. I've had this problem for at least the last year but with a ramp in university work this semester this problem is really starting to be annoying. I tried turning off "Automatic graphics switching" and this had no effect whatsoever. The graphics card is a NVIDIA GeForce GT 330M. I had a look for updated drivers from NVidia but these would not install saying the system was incompatible. I have seen similar problems on here and other places but either they have not had a solution or have had a solution which did not fix the problem for me. Anyhelp would be great, specially if Apple would tell me how to fix it.
Regards RichardThanks Guys, I didn't try the different display settings as this wouldn't affect multiple screens (and when other computers are plugged in they use the same frequencies). I did try the update posted above but unfortunately this hasn't worked. So I decided to bite the nail and reinstalled Snow Leopard on top of the previous installation (ie without erasing the HD) and then updating it. It seems to be running better so may have been a problem with one of the updates. I'll report back if the flickering comes back though.
-
Screen Sharing my iMac Running Snow Leopard
So I've enabled Remote Management on the iMac running Snow Leopard. I prefer this tab to the screen sharing tab because I like to have the remote management status tab active on the top menu bar.
A screen sharing session now disables the screen saver and display sleep on the iMac. Is there any way to reenable screen saver and display sleep when a screen sharing session is active?
My next question is: what is the minimum configuration in the remote management tab required for screen sharing?
Thanks,
IvanThis post seems to be a duplication
10:47 PM Tuesday; December 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
Is there a way to down grade my Mac Pro 5,1 firmware so it will run Snow Leopard?
If so will it still run Lion? I believe this machine is the same hardware that ran Snow Leopard 6 months ago. Brand new Mac Pro 5,1 two months old.
HURRAY!!! Houston we have Snow Leopard!!
FatMac your post of the firmware data got me digging deeper.... To sum-up
Prior to the death of the old Mac Pro1,1. I was in the process of re-building my emergency boot disks.
As a result my Snow Leopard Emergency Boot Disk (SL EBD) was a fresh 10.6 install.
The old MacPro died before I was able to update the SL EBD to 10.6.8. This I of course forgot.
The new MacPro would not boot from the old MacPro hard drive (10.6.8). (It must have gotten taken out in the crash). And obviously would not boot off of the SL EBD.
Initially Apple told me that the new MacPro would run SL. But later conversations with tech support emphasized that it would not and it was standard practice to not make new machines backward compatible.
I assumed I was done-for.
Thanks to FatMac's firmware info, I investigated deeper and found my SL EBD was only 10.6.
The 10.6.8 combo updater will not run from Lion.
Now if I could somehow boot into Snow Leopard so I could do an update.
I stumbled across a Carbon Copy Clone sparse image of my old MacPro 10.6.8 start-up disk that I had made DAYS before the crash and burn of the old MacPro. (Am I lucky or what?)
CCC'd the old sparse image on to a spare hard drive, restarted & Bingo! I was running Snow Leopard!
Ran the 10.6.8 combo udater and updated my Clean Snow Leopard install. Now I have a virgin copy of Snow Leopard to boot from.
I guess I can toss out my Leopard 10.5.6 Boot disk.
Now I need to make a sparse image of the virgin Snow Leopard boot disk so I can re-install it at anytime in the future.
Anyone know how to burn an 8 Gig sparse image onto to several DVD's for archiving?
FatMac, the screen capture was the old fashoned way... I pointed a camera at it.
Thanks to everyone for their contributions.
Today was a good day!!! -
My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?
Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6 -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
mpeg video file won't open in quick time player on my macbook running snow leopard.
works fine on iMac running mountain lion.
any ideas?HI,
If iChat is Open and your think Accounts/Screen Names are logged in then go to the Window Menu
This should list the accounts that are logged in with various keystrokes ( Apple/CMD ( or ⌘) and a Number) shown next to them.
Using these should get the Buddy list "back".
It is possible to Hide the Buddy list and then Quit iChat.
iChat will then "remember" where the windows were eve if this was Hidden.
Can you confirm that after reinstalling or restoring from Time Machine with possibly an Earlier Version you have Downloaded the COMBO version of OS X 10.6.8 and "run the COMBO" (Installed it - again) to update iChat ?
It is possible the text chat Window is also Hidden on double clicking a Buddy.
The easiest way for this to happen is to use a second Display and drag some windows to the second Display.
iChat "remembers" where you last had Outgoing Chats so Audio and Video windows will be where you left them as will Text Chats.
Incoming Chat Invites are normally in set places unless there is a chat already open to that Buddy.
With Windowing issue like this is sometimes pays to delete com.apple.ichat.plist itself (on it's own) and restart iChat (this plist holds the window positions amongst other things)
8:49 PM Monday; February 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
How to I run Snow Leopard, Mountain Lion and Windows 8 on my new iMac
I just bought a new iMac. My goal is to set up 3 different partions to run 3 different operating systems (Mountain Lion, Snow Leopard, and Windows 8). The reason for this post is because when I attempted to do this same thing on my old iMac ( except I was running Lion instead of Mountain Lion) I was able to create a partion that would run Snow Leopard (so I could run Final Cut Pro 6.0.6 on a more stable platform), however I totally "hosed" my old Bootcamp partition running Windows XP. The iMac won't even bootup in Bootcamp anymore. It is just a black screen and it says something about it not being a bootable drive and to insert a bootable disc.
So I need to know the best way to do this, and I want to avoid having the same problems with my new iMac that I had on my old one, especially since I have a freelance job starting next week and my client is sending me licences for software that I will need to run on Windows 8.
Thank you in advanceUse the Boot Camp Assistant to install Windows 8 and a product such as VirtualBox, VMware Fusion, or Parallels Desktop to run Snow Leopard Server in emulation. That iMac model isn't capable of being booted into Snow Leopard.
(82996) -
Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences
Hi..
For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
Click the pop up menu to the right of New messages sound to make a selection. -
Screen Sharing - Snow Leopard to Lion
Does anyone know if you can use a Snow Leopard Machine to view the screen (Screen Sharing) of a Lion Machine? By utilizing Screen Sharing could I manipulate the a Lion Machine from a Snow Leopard Machine?
Thanks.jmr16 wrote:
Doesn't work here. The "Contacting <hostname>..." dialog just sits there spinning its barber pole until I cancel (I let it try for a few minutes).
It definitely works the other way; my computer can control my husband's MacBook that's still running Snow Leopard.
I tried to update his MacBook this morinng and got a message that he doesn't have enough memory. Whoops! Had to order some tonight! -
My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times. Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze. Please help.If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.
-
I want to sell off my old MacBook Pro and do not want any of my old stuff on it for the next person to fool around with. I'd like a clean-slate for the next guy/gal. It's a 17-inch that I purchased back in '07. It is currently running Snow Leopard after I installed it myself about two years ago. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
raeusebio32 wrote:
I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
No problem, stick in your 10.6.3 Snow Leopard retail disk you used to upgrade from 10.4/10.5 with
If you don't have this disk anymore, you can order one online at Apple.com for $29, they don't sell it in the physical stores.
http://store.apple.com/us/product/MC573Z/A
Reboot holding the c or option key down to boot from the disk, select Disk Utility from under the Utilities menu on the second screen (first is language selection)
Now select your boot drive on the left with the drive makers name and disk size and click Erase > Security Option > Zero All Data and click Erase
It will take some time to complete as it's making sure all your personal data if not easily recoverable off the drive using software.
Now quit and you will be back in the installer window, install 10.6 and it will reboot to the "Welcome Video" you can choose to press the power button down and do a hard shutdown, the computer will boot again to this video for the next owner.
If you need even more security in your data deletion efforts I suggest you read this
How do I securely delete data from the machine?
Maybe you are looking for
-
Hi SRM Gurus, I'm facing an issue wherein SC is being created as PR at the backend system and since there's no customization for a PR document, "Interval RQ of number range object REQREQ does not exist " is being ouputted. Could someone help me on th
-
Hi When I edit an event in iCal i can only see the year and time in the from and to fields or if I try and set a repeating event to a date. Is there a way to get them to show again. John
-
File extention and default application
When i open a .doc file it's open the wrong application. How can i set the default application i want to open. thanks
-
How can I increase the volume for the facetime alert ring? Will it ring when the Mac is asleep?
Need to hear the facetime ring louder!
-
Restoring Disk0: when it breaks in 12k XOR routers
Hi all, How to restore the Disk0: contents like corrupted boot image,configurations and file system on the disk0: in 12k routers running with XOR Build. 1)Is there any options available ? 2)IS there any best practices to deal with this above ? 3)Is i