FRS Virtual Unit is down.. Need Help

Hi all,
FRS virtual unit is down. Need help to get this back to normal.
I tried to reset, repair, changed the mode and role, still its going down.
Yesterday in one of our server, disk space was went to zero, by that time onwards it stopped working and not writing any logs in log folder.
Need some help to resolve this issue asap.
Thanks
Sathish.

This seems more to be related with BW stuff. This does not seem to be the right community. Please update this right community.
As you mentioned about space issue, you have already found the cause.

Similar Messages

PPP and virtual-access2 is down, please help

Dear All,
Since yesterday we have problems with our Cisco 878 SDSL router/modem. We make use of a standard script from our ISP (KPN.com). When we have uploaded the script by Windows Terminal, the router is unable to establish a ppp connection with our ISP. Virtual-access2 link is up, but the protocol is down.
Please find underneath the standard script from KPN.com. Please help we have already lost 1 day with "trial and error" and the service and support is not that great from our ISP.
Thanks in advance for your reply.
Cheers.
FYI
version 12.4
no service pad
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
no service udp-small-servers
no service tcp-small-servers
no service dhcp
hostname IDSL-ADV-Cust-CPE-SDSL
logging rate-limit console 10 except errors
boot-start-marker
boot-end-marker
ip subnet-zero
ip cef
no ip dhcp-client network-discovery
ip dhcp pool IAS
import all
origin ipcp
ip name-server 194.151.228.18
ip name-server 194.151.228.34
controller DSL 0
mode atm
line-term cpe
line-mode auto
dsl-mode shdsl symmetric annex B
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface ATM0
no ip address
no shutdown
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description To IAS over ADSL Access Router
pvc 2/32
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
ip address pool IAS
ip verify unicast reverse-path
no shutdown
no cdp enable
hold-queue 32 in
interface Dialer0
ip address negotiated
ip verify unicast reverse-path
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname KPN
ppp chap password xx
ppp pap sent-username kpn password xxx
ppp ipcp dns request
ppp ipcp mask request
ppp ipcp address accept
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
no ip http secure-server
control-plane
scheduler max-task-time 5000
end

Hi,
beside that the proposed config has no NAT, it appears fine. Can you send output of "show dsl interface" and "show atm PVC 2/35".

URGENT!- ibook slowing down, NEED HELP BADLY

Good day.
When I bought my ibook, i upgraded the RAM of this right away. i added a 512MB RAM. I was happy with the way it was performing. After a few months, i decided to buy an externat 40GB hard drive because i found the internal hard drive too small and love downloading song and shows over the internet. after a few months, i noticed that my ibook slowed down. before, the "beachball " would seldom appear. now it appears alot. i just noticed that my ibook has really slowed down. i admit, i download a lot. but all these downloads go straight to the external hard drive. the files that i save in the internal hard drive are only excel, word, and pwerpoint files. very small. anyone can help me? is there something that i can use to speed up my ibooks performance? what should i do? is there such a thing as defragment (just like the one of a pc).

Hi Michaelgnm,
Welcome to Apple Discussions
Try verifying and repairing permissions (Knowledge Base Document #106712 on Troubleshooting permissions issues in Mac OS X). Do you notice you slow during certain times. An example would be working an file from your external hard or using iPhoto. How much hard drive space do you have on your internal hard drive? You may want try deleting programs that you don't use (on my iBook I don't use Garage Band, iDVD, etc). Maybe freeing up some space can help speed things up.
A great program to show you exactly what is on your computer is WhatSize.
If you are going to use WhatSize to delete any files/programs/applications, please be careful and make sure you know exactly what you are deleting and if there are any repercussions. WhatSize will show you files that you would not normally see; they are referred to as "invisible files". These invisible files are hidden from the users view because they would clutter the desktop and they hold vital information that if corrupted or deleted may cause problems. Please make sure you know what you are doing!
Have you deleted files that you don't use; like for my iBook, GarageBand. I use GarageBand on my iMac because it is much easier and faster, so I deleted it on my iBook. Have you tried the "erase install method"? The reason for doing this is because Mac OS X installs all the necessary fonts, languages, drivers, etc that people all over the world my need, by default. This tends to take up some room that you might want to get rid of (make sure first what you don't need and need). You erase and install your system software (Knowledge Base Document 301270 About Install Options w/ Mac OS X 10.4), and when installing, do a custom install. This way you can install the languages, drivers, and applications you want. The same technique can be done with iLife.
Do you using any "pro" applications (Adobe Photo CS, Aperture, etc)? You may want to try using a program like OnyX to run some maintenance scripts.
I hope that helps,
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Datagrid item renderer with drop down need help.

Hi Guys,
I am populating an advance data grid in which one column has an item renderer containing a drop down. This drop down has 4 items. When user selects more than one row the drop down should contain only two items. In my case when user selects multiple rows using control key and then clicks on any of the rows drop down then that row gets de selected which I don’t want I tried stop propagation and stop immediate propagation but that also didn’t helped. Please help
Thanx
Mahesh.

Hi
This is a default bahviour of dropdown.. dropdown will not allow you multiple selections.. you should create your own component by extending the combobox and try your thing,, If you click on one item.. then it calls internally change event. If the change event called then the dropdown will automatically closed.. so you should restrict this ...
Thanks
Ram

Photoshop slows down need help

For some odd reason photoshop will slow down to jagging strokes when I use my brush. i don't understand the cause for it though. I have it set to run upon startup and it is fast! But. if I close the program and reopen it up it is really slow. Can somen off a solution to this?

You need to provide system information and otehr details like whether you use a tablet for instance, document size, brush sizes, history states and so on...
Mylenium

HT4623 I'm trying to down load up dates to my I phone 4, unable to down need help. Any suggestions??

How to down load up dates your i phone 4 ???

Why not?
What happens when you try?
Without details it is virtually impossible to offer assistance.

Total Desktop Melt Down, Need Help!!!!

Okay,
My Desktop is gone. Let me explain. I was running Toast, Safari and Photoshop CS. I started Quickbooks and Quickboks started to run the "Check for Updates" and when it did that a Dialog box came up saying i was not connected to the internet which I knew was wrong. Just a second after that happened the computer blinked and the desktop was wiped clean. The Desktop Icon appears as a generic white icon and if I click on it Text Edit starts up. Everything I had on the desktop is gone. I ran Permissions, Periodic through the Terminal, and I even ran FSCK. FSCK repaired a small error in the header and the computer started up fine. But still the generic icon remains. I can't get the Desktop to appear or act as a directory. I cannot create a new folder on the desktop. I cannot drag a file onto the desktop. Help!!!

I just had the same thing, and after trying everything I could, I finally tossed my desktop folder and restarted. Now all is ok. Luckily I didn't have anything on the desktop that was irreplaceable. See this:
http://quickbooksgroup.com/webx?addPost@@.f7ca359

First time to order part for client unit on gsx.need help.

Hi!
My first time to order part on gsx for a customer.I need a hand.

1. It's a normal default setting for the bios screen to show the logo. I personally don't like it, so I turned it off. You can access it in the "Advanced BIOS" page of the bios.
2. Something must be in error to have the system stop booting. The bios only stops on errors. I wouldn't be overly concerned yet though. Default settings on the board make it stop on all errors. It should give you a reason why it's stopping so look at the screen when it stops and tells you to hit F1. That should give you an idea of what needs fixing.
3. Just turn off the RAID function. It's in the "Integrated Peripherals" screen.
4. Could be any number of reasons, checking your memory would be a good first step. As to Windows only seeing it as 131GB, that's probably because you installed with an older version of Windows XP, before SP1. Back then it couldn't see drives bigger then around 139GB. Install SP2 and you shouldn't have a problem. Just make sure that your BIOS sees it as 186GB. That's what 200GB drives usually show up as.
Michael

Oracle database down need help

My company is using a program called Digital Collections (DC4) from GMTI. We have an oracle database on the backend. Recently the server's raid array fan went out and we lost all 5 drives. We were able to recover some of the lost data from backup tapes but we can't seem to locate the oracle 8.0.5 install CD's. Now, I can only download 9i which as I understand will not access oracle 8 files. All the migration howto's start by dumping the data from oracle 8 and then importing to 9i. But if I don't have 8 running how can I dump the data? Does anyone know of a solution. Either a method or utility to dump the data from the raw files or a link to download 8.0.5 Any help will be greatly appreciated.

You can't attach oracle 8 version datafiles to 9i database or vice-versa. It was DBA's responsibility to keep the backups in case of disaster occurs at any time.
Check with your friends about the availability of oracle 8, you will get it, if you are lucky enough.
Jaffar

My walkman crash down :( need help

Suddenly my walkman crashed.. It gives that message " Unfortunatly, Walkman had stopped "

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you clear data for the Walkman-application via Settings > Apps > The tab "All" > Walkman > Clear data.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I tried downloading the iOS8 to my iPod 5th generation and when it finished downloading it shut down completely and it said there was an error and no the iPod is in recovery mode. What can I do to restore it and update it? Please, I need help.

Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.

What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I need help to remove the wrong email on my Iphone. I can't down load app because my apple ID doese not match with the wrong email please help

I need help to remove the wrong email on my Iphone. the represnter who set up my phone put in the wrong email, and now I can't down loand apps on my phone because the apple ID does not match

So sign out of the Apple ID under Settings > iTunes & App Store, then sign in with your own.

My iPod touch 4 generation 32gb sometimes is really slow and when ever I get on a app it will shut it down. My lock botton is broken and I use the accesery botton to lock it. That being said I can't power down my iPod. I need help, I don't know what to do

My iPod touch 4 generation 32gb sometimes is really slow.When ever my iPod is being slow and I get on an app the app will shut down. My lock botton is broken and I use the accesery botton to lock it. That being said I can't power down my iPod. I need help, I don't know what to do! Could you tell me how I can power down my iPod or how I can fix the slowness and the shutting down of the apps.

- Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
- Next, reset the iPod
To reset the iPod without the hardware buttons,
Reset network settings: Settings>General>Reset>Reset Network Settings. All your wifi and bluetooth preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected. You will have to rejoin wifi networks and repair BT devices
Then you can try:
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Need help with drop down list in parameters

Hi All,
I have the following data set:
DEPT1     DEPT2     DEPT3 DEPT4
Commissioner's Office     Finance     Accounting     Accounts Payable
Commissioner's Office     Finance     Accounting     Fiscal Analysis & Repo
Commissioner's Office     Finance     Accounting
Commissioner's Office     Planning,Asset Mgt     Asset Management     Inventory & Tracking
Commissioner's Office     Planning,Asset Mgt     Asset Management     Mobility & Congestion
Commissioner's Office     Planning,Asset Mgt     Asset Management     Roadway Safety
Commissioner's Office     Planning,Asset Mgt     Asset Management
Commissioner's Office     DesignProj Mgt & Tec     Bridge Dsgn Insp Hyd
In plus i have four parameters with searchlight options, the problem is when i select "Finance" from DEPT2 and in the next selection level i'm seeing all the departments "Accounting,Asset Management and Bridge Dsgn Insp Hyd" insted of just "Accounting". What i want is if i select a department in DEPT2, in the next drop down list(DEPT3) i want to see only the departement corresponding to the one i selected in dept2. Please need help.
Thanks

Hi
First of all you need to be using Discoverer 10g or 11g Plus not 9.0.4. Assuming you have the right version you need to present the parameters in the correct order. You can change the order on the parameters screen by selecting Tools | Parameters from the toolbar. You then use the Move Up and Move Down buttons to place them in the right order so that DEPT1 is offered first, followed by DEPT2, then DEPT3 and then DEPT4.
Next, you need to check the radion button on the bottom of the right-hand side that allows linking of parameters then you make DEPT2 dependent upon DEPT1, with DEPT3 dependent upon DEPT2 and so on.
While this works without hierarchies it works best when you have a hierarchy in place and even better when there is a composite index on the 4 items.
Best wishes
Michael

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

FRS Virtual Unit is down.. Need Help

Similar Messages

Maybe you are looking for