FRSM Randomly Reports Incorrect Quota Usage

We are using Server 2008 with FSRM 6.1 and are randomly seeing some quotas reporting incorrectly that they are at 100%. If the folder is checked they are well under the quota but FRSM still reports it as 100% even after a refresh.
The only way that I have seen the quotas reporting as normal is when we delete them and recreate them but it returns a few weeks later.
This is only happening on one file server (we have several that FRSM manages the quota allocations for) and disk compression has not been turned on for that volume. This also is not happening to every quota on that volume, only some.
Any ideas?

Hi,
Firstly, please refer to the thread to check if the disk usage of the folder is reported correctly:
Server 2008R2 reports disk size/free space incorrectly in explorer and disk manager
http://social.technet.microsoft.com/Forums/en-US/bf5445d5-e796-4cbb-9571-8639b900cfd4/server-2008r2-reports-disk-sizefree-space-incorrectly-in-explorer-and-disk-manager?forum=winserverfiles
Then check if your current account have permissions to access subfolders. If the user does not have permission to access all subfolder. The size of some folders will not be counted with right click on a folder.
FSRM usage quota incorrect after deletion of 'RECYCLER' folder
http://social.technet.microsoft.com/Forums/en-US/4a076bd3-6e84-4392-9d1a-d93e67a9c319/fsrm-usage-quota-incorrect-after-deletion-of-recycler-folder?forum=winserver8gen
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

FSRM 2008 R2 reporting inaccurate quota usage amounts

I've got a Win2008r2 Enterprise server with FSRM 2008R2 installed. I switched someone's quota from soft to hard when they reached 472% of their quota, to try to curb their appetite for disk space! They cleaned things up significantly, and came
well under their usage limit. They then tried to save something and they can't. I have disabled and re-enabled their quota, I've ensured there are no nested quotas, but it still shows the % Used as 472%. I've emptied their directory completely
and refreshed the FSRM view and still no luck.
I'm unable to determine the correct version of FSRM. Does anyone know how to tell if I'm running Update2 or not, or if there are any updates to it at all that are available? I am at my wits end trying to get this thing to refresh!
Thanks,
Joe

I have the same problem for one of 2198 quotas (so far). The same directory quota (hard quota) for one particular user has reached 100% and blocked access 4 times now. I can delete the quota and re-create it and it will work for a couple
months before it denies access again. There is nothing unique about this user that I know of. I have had no other reports of people being denied access due to quota so I think it is isolated to this one user.
Thank you,
Scott

FSRM reporting quote usage larger than the actual Size

File server resource manager is reporting quote usage larger than the actual Size or even “Size on Disk”. The only theory I have so far is that the FSRM is counting data in Shadow Copy. Does FSRM count data in Shadow Copy?

Hi,
Please check if you turn on the NTFS file system compression functionality or if you compress the files that you own on an NTFS volume. If so, the disk quota that you are charged increases.
Disk Quota Charges Increase If You Turn On the NTFS Compression Functionality
http://support.microsoft.com/kb/320686/en-us
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Norton reports high memory usage with firefox and it crashes often

Norton antivirus 2011 has pop up warnings reporting high memory usage from Firefox. I have been getting theem often and my computer is crashing often after those pop up warnings. Thanks

Safe mode did not help.
I have disabled ALL extensions and plug-ins, but the problem with "zig-zag" memory usage still remains (I've not tried to leave browser open for the night yet).
I think I'll do clean reinstall with completely new empty profile (without sync'ed information) to try this out. If this works, I'll start adding stuff (configuration, sync, features, etc) to see what causes the problem.

Report In quota agreement

Hi,
Is there any standard report in Quota agreement.
Thanks,
Zafina

Hi,
Use t.code:MEQM Quota Arrangement for Material
For more check the link:
Source determination,Quota Arrangement Process
Regards,
Biju K

Subcontract MRP Area with quota usage - urgent

We have a subcontractor supplying assembly X which in turn require us to supply component Y to the subcontractor. We have two vendor for supplying component Y to subcontractor. Scheduling agreement with component vendors are set up for direct delivery to subcontractor. Both the scheduling agreements are included in the source list with MRP indicator 2. Quota arrangement is set up for the component.
We have set subcontractor MRP area and assigned the same to component Y material master. Special procurement key 20 is assigned in subcontractor MRP area. Quota usage and source list are duly enabled. Quota usage indicator is 3 which provides for MRP, PR, schedule line etc.,
When we run MRP ffor component Y for subcontract MRP area, system is generating schedule line for but without update quota file. Further, the scheduling agreement picked up is not of the correct vendor as per Quota logic.
Does SAP support quota usage with subcontract MRP area. If not, is there a work around.
Shall appreciate urgent response

Dear Ravi,
you will get a seperate location product for your material. MRP areas in apo are represented by a seperate location (type 1007 = storage location mrp area). You can transfer your ecc mrp areas via cif (CFM1). The master data you maintain in mrp section of the material master in R/3 will be trasfered to that location product. Furthermore you can maintain it manually in apo MAT1 (location = name of your mrp area). That technique provides you the possibility to maintain different parameters for the plant and the mrp area.
Kind regards,
Christian

Error Report: No Data Usage Alerts for 250 MB Plan - June 2014

Hi, this post will report a data usage alert error for June 2014.
I previously signed up for data usage alerts when 50%, 75%, and 90% of my data is used. On June 10, at 11:00 PM, I discovered through my Verizon Wireless account that over 250 MB of data had already been used (my plan contains 250 MB). I did not receive any usage alerts prior to this time. I immediately upgraded to the 500 MB plan to avoid overage charges.
If the data usage alerts had worked properly, I would not have faced the upgrade fee or overage charges. Would it be possible to cancel the additional charges that arose this month because the data usage alerts did not work properly?
Thank you!
Hannah

Are you serious!!! Look at all of the calls on this matter in your records and fix it. I am sure at this point that it is another Verizon scam to solicite millions of dollars from it's customers only to have yet another class action lawsuit filed so the lawyers can get rich and the customers screwed.
AyaniB_VZW <[email protected]> wrote:
AyaniB_VZW created the discussion
"How to Stop False Data Usage Alerts?"
To view the discussion, visit: https://community.verizonwireless.com/message/1219549#1219549
>

How to make use of report - RPDLGA20 - Wagetype Usage report?

Hi,
Your replies will be highly appreciated.
I wanted to use report - PRDLGA20 ( Wagetype usage )
For suppose to check for the Wagetype which processing class has been set up etc,.
When I ran this report, and click on "Processing class and their values" , I do see list of classes & their specifications but I do not see any indication/mark against the specification defined against the selected Wagetypes. Like wise it is with other results as well.. ( Evaluation class, Cumulation etc.,)Do we need to activate this report by some means so that it will pull out the selected Wagetype configuration details in report rather than listing out whats there in SPRO?
Thanks for your reply.
Rgds
Peddi

Hi Raja,
1) Mention the fields that you wish from database table (incase you don't need all the fields from the database table).
2) Don't use the INTO CORRESPONDING FIELDS OF TABLE ztable clause.
3)Instead use INTO TABLE ztable (But take care that during the declaration of the ztable, the fields declared are in order that in database table to fetch the Records in sequence).
Please Find the Syntax and Code Below..
SELECT * FROM <TABLE>
WHERE <WHERE>
%_HINTS ORACLE 'INDEX("<TABLE>~<INDEX ID")'.
SELECT carrid
INTO TABLE t_spfli
FROM spfli
WHERE carrud IN s_carrid AND
connid IN s_connid
%_HINTS ORACLE 'INDEX("&SPFLI&" "SPFLI~XXX")'.
Hope this Is helpFul
Thanks
kalyan

SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert) after Firefox 36 Upgrade

When upgrading from Firefox 35 to 36 (Windows 8, 32 bit) I start getting "SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert)" SSL errors on at least one website I use. (https://marketplace.ibmcloud.com).
The message only appears when I get redirected to the website again after a previous OpenID login (some more cookies are set). When I browse the website without authentication it works on the encryption without any issues.
None of [1] applied, I do not experience this problem with any other browser or the previous version of Firefox. It seems to be limited to the specific case. Clearing any kind of cache, enable / disabled the ssl3* mechanisms, did have zero effect.
Is there any other way to debug this or someone has an idea what changed with Firefox 36 to introduce this behavior? I downgraded back to 35 for now to work again.
[1] https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=SSL+peer+reports+incorrect+Message+Authentication+Code+(Error+code%3A+ssl_error_bad_mac_alert)&step=aaq-question

I created a ticket there as well for them to investigate, although knowing IBM I guess we know the answer already, if I hear anything from there I will let you know.
However, as the problem only occurs on the one version of Firefox as of right now, I'm inclined to role out potential server side issues as a reason and pass it to something within Firefox, or was there a change any encryption defaults that might force the server to switch to a different version or something that might have the bug?

Uptime being reported incorrectly

Hey guys
I have this little weird problem... I know I shoudln't be -too- concerned about uptime since my arch still works beautifully, but it's like one of those small details in a picture that keeps annoying you from far, far away until you finally explode and rant about it, if you get what I mean .
The problem is simple: my uptime is being reported incorrectly! take a look:
[dragon@cave ~]$ uptime
09:57:21 up 13 min, 1 user, load average: 0.02, 0.12, 0.10
[dragon@cave ~]$ date
mié ago 26 09:57:22 VET 2009
[dragon@cave ~]$
Apparently, I turned the PC about 10 hours ago? I just turned it on 30 minutes ago! what could be happening?
Here goes some "last" output:
dragon tty7 :0 Wed Aug 26 09:44 still logged in
reboot system boot 2.6.30-ARCH Wed Aug 26 09:43 (00:14)
dragon tty7 :0 Wed Aug 26 03:26 - down (01:23)
dragon tty7 :0 Wed Aug 26 03:25 - 03:26 (00:01)
dragon tty7 :0 Wed Aug 26 00:25 - 03:25 (03:00)
reboot system boot 2.6.30-ARCH Wed Aug 26 00:25 (04:25)
dragon tty7 :0 Mon Aug 24 15:12 - down (1+07:19)
dragon tty7 :0 Mon Aug 24 12:37 - 15:12 (02:35)
reboot system boot 2.6.30-ARCH Mon Aug 24 12:37 (1+09:55)
dragon tty1 Mon Aug 24 05:15 - down (01:14)
dragon tty1 Mon Aug 24 05:15 - 05:15 (00:00)
dragon tty7 :0 Mon Aug 24 05:04 - down (01:25)
dragon tty7 :0 Mon Aug 24 23:14 - 05:04 (-18:-10)
reboot system boot 2.6.30-ARCH Mon Aug 24 23:14 (-16:-44)
dragon tty7 :0 Mon Aug 24 03:53 - crash (19:20)
dragon tty7 :0 Mon Aug 24 03:29 - 03:53 (00:24)
dragon tty7 :0 Mon Aug 24 03:28 - 03:29 (00:00)
dragon tty7 :0 Mon Aug 24 03:27 - 03:28 (00:00)
dragon tty7 :0 Mon Aug 24 03:22 - 03:27 (00:05)
dragon tty7 :0 Mon Aug 24 03:15 - 03:22 (00:06)
dragon tty7 :0 Mon Aug 24 03:15 - 03:15 (00:00)
dragon tty1 Mon Aug 24 03:15 - crash (19:59)
dragon tty1 Mon Aug 24 03:15 - 03:15 (00:00)
dragon tty7 :0 Mon Aug 24 03:14 - 03:15 (00:00)
dragon tty7 :0 Mon Aug 24 19:30 - 03:14 (-16:-16)
dragon tty7 :0 Mon Aug 24 19:30 - 19:30 (00:00)
dragon tty7 :0 Mon Aug 24 18:57 - 19:30 (00:32)
dragon tty1 Mon Aug 24 18:55 - 18:56 (00:01)
dragon tty1 Mon Aug 24 18:55 - 18:55 (00:00)
dragon tty7 :0 Mon Aug 24 18:53 - 18:57 (00:03)
dragon tty1 Mon Aug 24 18:52 - 18:53 (00:00)
dragon tty1 Mon Aug 24 18:52 - 18:52 (00:00)
dragon tty7 :0 Mon Aug 24 17:30 - 18:53 (01:23)
dragon tty7 :0 Mon Aug 24 17:29 - 17:30 (00:00)
dragon tty1 Mon Aug 24 17:29 - 17:29 (00:00)
dragon tty1 Mon Aug 24 17:29 - 17:29 (00:00)
dragon tty7 :0 Mon Aug 24 17:25 - 17:29 (00:03)
dragon tty7 :0 Mon Aug 24 17:23 - 17:25 (00:01)
dragon tty7 :0 Mon Aug 24 16:53 - 17:23 (00:30)
dragon tty7 :0 Mon Aug 24 16:52 - 16:53 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 16:51 (-10:-21)
dragon tty2 Mon Aug 24 16:41 - down (00:09)
dragon tty2 Mon Aug 24 16:41 - 16:41 (00:00)
dragon tty1 Mon Aug 24 16:40 - down (00:09)
dragon tty1 Mon Aug 24 16:40 - 16:40 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 16:40 (00:09)
dragon tty2 Mon Aug 24 04:57 - 05:13 (00:15)
dragon tty2 Mon Aug 24 04:57 - 04:57 (00:00)
dragon tty2 Mon Aug 24 04:52 - 04:56 (00:04)
dragon tty2 Mon Aug 24 04:52 - 04:52 (00:00)
dragon tty1 Mon Aug 24 04:50 - down (00:40)
dragon tty1 Mon Aug 24 04:50 - 04:50 (00:00)
root tty1 Mon Aug 24 04:48 - 04:49 (00:01)
root tty1 Mon Aug 24 04:48 - 04:48 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 04:48 (00:41)
dragon tty2 Mon Aug 24 04:33 - down (00:13)
dragon tty2 Mon Aug 24 04:33 - 04:33 (00:00)
dragon tty1 Mon Aug 24 04:29 - down (00:18)
dragon tty1 Mon Aug 24 04:29 - 04:29 (00:00)
root tty1 Mon Aug 24 04:28 - 04:29 (00:01)
root tty1 Mon Aug 24 04:28 - 04:28 (00:00)
reboot system boot 2.6.30-ARCH Mon Aug 24 04:27 (00:19)
About details... well, it's a desktop PC and I never suspend or hibernate it...
Any ideas guys? if you need any more info just say, I don't know what else is needed to help solve the problem
Thanks in advance!
- DARKGuy
Last edited by DARKGuy (2009-08-26 14:37:43)

AHH... huh, y'know, I think I should do a backflip and kick myself in the back for having overlooked that up and created this thread XD...
/me hides in shame
Thank you guys ;;
Last edited by DARKGuy (2009-08-26 14:41:13)

Why are DWDM XFP tunables reporting incorrect wavelength channels?

Why are the channel numbers output from "show controllers tenGigE <port> phy" reporting incorrect channels?
I have seen this in IOS XR 4 and 5 now. The channel is incorrect but the tuned wave is correct and the channel appears correct in the configuration.
I searched for caveats but found nothing... Am I just overlooking something?
RP/0/RSP0/CPU0:ios(config)#int tenGigE 0/1/0/0
RP/0/RSP0/CPU0:ios(config-if)#shut
RP/0/RSP0/CPU0:ios(config-if)#controller dwdm 0/1/0/0
RP/0/RSP0/CPU0:ios(config-dwdm)#admin-state maintenance
Wed Mar 5 11:29:49.698 UTC
Maintenance will be Forced one if it is disabled for this port. You may first verify the status by the show interfaces command.
RP/0/RSP0/CPU0:ios(config-dwdm)#commit
Wed Mar 5 11:29:50.818 UTC
RP/0/RSP0/CPU0:ios(config-dwdm)#wavelength 55
RP/0/RSP0/CPU0:ios(config-dwdm)#commit
Wed Mar 5 11:29:58.577 UTC
RP/0/RSP0/CPU0:ios(config-dwdm)#admin-state in-service
RP/0/RSP0/CPU0:ios(config-dwdm)#commit
Wed Mar 5 11:30:05.217 UTC
RP/0/RSP0/CPU0:ios(config-dwdm)#int tenGigE 0/1/0/0
RP/0/RSP0/CPU0:ios(config-if)#no shut
RP/0/RSP0/CPU0:ios(config-if)#commit
Wed Mar 5 11:30:13.810 UTC
RP/0/RSP0/CPU0:ios(config-if)#exit
RP/0/RSP0/CPU0:ios(config)#exi
RP/0/RSP0/CPU0:ios#
RP/0/RSP0/CPU0:ios#
RP/0/RSP0/CPU0:ios#show controllers tenGigE 0/1/0/0 phy | begin Signal
Wed Mar 5 11:30:32.570 UTC
        Signal Condition Control: Normal Async REFCLK,
        Thresholds:                    Alarm High         Warning High          Warning Low            Alarm Low
              Temperature:               73.000                70.000                -5.000                -8.000
                  Voltage:           0.000 Volt            0.000 Volt            0.000 Volt            0.000 Volt
                     Bias:         85.000 mAmps          72.000 mAmps          10.000 mAmps           5.000 mAmps
           Transmit Power: 3.981 mW (6.00 dBm)   2.512 mW (4.00 dBm)   0.794 mW (-1.00 dBm)   0.501 mW (-3.00 dBm)
            Receive Power: 0.398 mW (-4.00 dBm)   0.251 mW (-6.00 dBm)   0.002 mW (-27.96 dBm)   0.001 mW (-30.00 dBm)
        Laser First Frequency: 191 THz, 950.000 GHz
        Laser Last Frequency: 196 THz, 0.000 GHz
        Laser Min Grid Spacing: 50.000 GHz
        Wavelength Control: setpoint=1550.05 nm, error=0.00 nm
        FEC Control: amplitude_threshold=50.00%, phase_setpoint=50.00%
        Temperature: 42.949
        Voltage: 0.000 Volt
        Tx Bias: 20.654 mAmps
        Tx Power: 1.413 mW (1.50 dBm)
        Rx Power: 0.000 mW (<-40.00 dBm)
        Control Status: Module NR, Interrupt, Rx LOS, Rx not ready, Rx CDR not locked,
        Wavelength Channel: 30
        Wavelength Error: 0.000 GHz

1)
CLI configures XR Channel.
'wavelength 55' maps to Wavelength '1550.116 nm'
The following CLI gives CLI mapping to Wavelength (nm).
RP/0/RSP0/CPU0:RR03#sh controllers dwdm 0/1/0/0 wavelength-map
55 6 193.40 1550.116
2)
SW translates configured 'wavelength <channel number>' to
Optics Channel number (30) to get Wavelength 1550.05 nm.
RP/0/RSP0/CPU0:ios#show controllers tenGigE 0/1/0/0 phy | begin Signal
Laser First Frequency: 191 THz, 950.000 GHz
        Laser Last Frequency: 196 THz, 0.000 GHz
        Laser Min Grid Spacing: 50.000 GHz
        Wavelength Control: setpoint=1550.05 nm, error=0.00 nm
        FEC Control: amplitude_threshold=50.00%, phase_setpoint=50.00%
        Temperature: 42.949
        Voltage: 0.000 Volt
        Tx Bias: 20.654 mAmps
        Tx Power: 1.413 mW (1.50 dBm)
        Rx Power: 0.000 mW (<-40.00 dBm)
        Control Status: Module NR, Interrupt, Rx LOS, Rx not ready, Rx CDR not locked,
        Wavelength Channel: 30
        Wavelength Error: 0.000 Ghz
3)
Instead we recommend our customers to use the following CLI which gives option to
Configure wavelength in 'nm'.
RP/0/RSP0/CPU0:RR03(config-dwdm)#wavelength update ?
<1528773-1568362> Enter 7-digit Wavelength data; e.g. 1532290 for 1532.29 nm
Available wavelength is given by this CLI.
RP/0/RSP0/CPU0:RR03#sh controllers dwdm 0/1/0/0 wavelength-map

Portal component information reporting incorrect version

Dear all,
Has anyone experienced that the portal content information (http://hostname:port/monitoring/ComponentInfo)is reporting incorrect information? We have installed XSS 603 components and the summary part does not reflect that , but the details does.
Its also not reporting SAPPCUI_GP in the software component part. Has anyone seen this and whats the fix?
Thanks!
Neeta

HI Shanti,
I followed the intructions in note # 910073 and all worked fine. However, the version information is still not reported correctly. component information is reporting ESS600 and we have ESS603 installed & no PCUI component is reported but the details show that its deployed.?
Does the portal need to be restarted after the change in note 910073?
Regards, Neeta

Disk Quota reporting incorrectly

I have a user with a 500Mb disk quota who is currently only using 54Mb of this space. She is using the Messenger Express client and keeps getting a message saying she is over her quota when she clearly isn't. She has been over quota previously but isn't anymore.
Any ideas?

1. How are you determining quota in use?
I have used the Messenger Express web client - scroll to the bottom of the page and read the bottom line
13 Messages (1 unread) - 54MB (500MB limit) - 536 total messages (no limit)
I have also used the mboxutil -u <username> comand and can see the same information there
diskquota size(K) %use msgquota msgs %use user
512000 54074 10% no quota 536 username
2. How have you set the quota? In LDAP?
Using the iPlanet console in LDAP I have populated the mailquota attribute with the value 524287778
3. Have you run any reconstructs recently?
The only reconstruct command I have used is
reconstruct -o
to find orphaned accounts
4. Does the user have a different quota from the majority of your users?
Yes, most of our users have a 90Mb mailbox disk quota, but there are several other users with a 500Mb quota or greater
5. Exactly what version of Messaging Server do you have?
imsimta version reports
iPlanet Messaging Server 5.2 HotFix 1.16 (built May 14 2003)
libimta.so 5.2 HotFix 1.16 (built 12:32:17, May 14 2003)
SunOS messaging 5.8 Generic_108528-16 sun4u sparc SUNW,Sun-Fire-280R

BI publisher report : why "Database Usage Tracking Summary" repport is empty ?

Hi everyone,
I'me using BI publisher intergated to Grid Control12c (R3), trying to get "Database Usage Tracking Summary" report folowing Oracle documentation (http://docs.oracle.com/cd/E24628_01/doc.121/e24473/usage_reports.htm#EMADM13568)
And I have 2 problems :
1) FTPburst delivery is not working, sftp is configured but still have the folowing error
Echec de la distribution.
[INSTANCE_ID=gs00slli052.occ.lan.1424277393149] [OUTPUT_ID=1973]
Echec de distribution du document
[INSTANCE_ID=gs00slli052.occ.lan.1424277393149] [DELIVERY_ID=1974]Error deliver document to FTP::Exception happened when calling deliver API::Error deliver document to FTP::FILE=[::Exception happened when calling deliver API::oracle.xdo.delivery.ssh2.SshException: Error in writing data Broken pipeoracle.xdo.service.delivery.DeliveryException: oracle.xdo.delivery.ssh2.SshException: Error in writing data Broken pipe
at oracle.xdo.service.delivery.impl.DeliveryServiceI
2) Since FTPburst delivery is not working, i decide to try mail delivery. The delivery itself is working but the report is empty (see Sortie1.xls in attachements)
So i don't know why is it empty.
Can someone guide me ?

Hi,
Thank You for your quick reply. The table permission was alright.
Its very strange that, we configure usage tracking in obiee 11.1.1.6.0 using enterprise manager and that how all document says. And then it should automatically update the "NQSCONFIG.INI". But it was not updated there. So we need to change all configuration settings in both "Enterprise Manager" and also in the "NQSCONFIG.INI". Then it works fine!!
Thanks,
BK.

Daily metrics report of Exchange usage

Hello Everyone,
I was delegated the task to find a way to perform an daily metrics report of our new exchange system and am at a loss of how to begin. We have recently rolled out an Exchange 2013 on premise deployment to serve 6000 accounts. Our environment consists
of 6 dual role exchange servers.The request was that I present a daily report with the following criteria I/O counts, CPU usage, Storage, bandwidth, etc.
Any suggestions are greatly appreciated

Hi sanoske312,
I suggest ask Script Center for help so that you can get more professional suggestions. For your convenience:
https://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx?f=255&MSPPError=-2147217396
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

FRSM Randomly Reports Incorrect Quota Usage

Similar Messages

Maybe you are looking for